summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/debugging-via-ohci1394.txt41
-rw-r--r--Documentation/power/basic-pm-debugging.txt2
-rw-r--r--drivers/firewire/core-transaction.c6
-rw-r--r--drivers/firewire/core.h3
-rw-r--r--drivers/firewire/ohci.c27
-rw-r--r--lib/Kconfig.debug11
6 files changed, 42 insertions, 48 deletions
diff --git a/Documentation/debugging-via-ohci1394.txt b/Documentation/debugging-via-ohci1394.txt
index 611f5a5499b1..fa0151a712f9 100644
--- a/Documentation/debugging-via-ohci1394.txt
+++ b/Documentation/debugging-via-ohci1394.txt
@@ -22,10 +22,12 @@ locations such as buffers like the printk buffer or the process table.
Retrieving a full system memory dump is also possible over the FireWire,
using data transfer rates in the order of 10MB/s or more.
-Memory access is currently limited to the low 4G of physical address
-space which can be a problem on IA64 machines where memory is located
-mostly above that limit, but it is rarely a problem on more common
-hardware such as hardware based on x86, x86-64 and PowerPC.
+With most FireWire controllers, memory access is limited to the low 4 GB
+of physical address space. This can be a problem on IA64 machines where
+memory is located mostly above that limit, but it is rarely a problem on
+more common hardware such as x86, x86-64 and PowerPC. However, at least
+Agere/LSI FW643e and FW643e2 controllers are known to support access to
+physical addresses above 4 GB.
Together with a early initialization of the OHCI-1394 controller for debugging,
this facility proved most useful for examining long debugs logs in the printk
@@ -36,17 +38,11 @@ available (notebooks) or too slow for extensive debug information (like ACPI).
Drivers
-------
-The ohci1394 driver in drivers/ieee1394 initializes the OHCI-1394 controllers
-to a working state and enables physical DMA by default for all remote nodes.
-This can be turned off by ohci1394's module parameter phys_dma=0.
-
-The alternative firewire-ohci driver in drivers/firewire uses filtered physical
+The firewire-ohci driver in drivers/firewire uses filtered physical
DMA by default, which is more secure but not suitable for remote debugging.
-Compile the driver with CONFIG_FIREWIRE_OHCI_REMOTE_DMA (Kernel hacking menu:
-Remote debugging over FireWire with firewire-ohci) to get unfiltered physical
-DMA.
+Pass the remote_dma=1 parameter to the driver to get unfiltered physical DMA.
-Because ohci1394 and firewire-ohci depend on the PCI enumeration to be
+Because the firewire-ohci driver depends on the PCI enumeration to be
completed, an initialization routine which runs pretty early has been
implemented for x86. This routine runs long before console_init() can be
called, i.e. before the printk buffer appears on the console.
@@ -64,7 +60,7 @@ be used to view the printk buffer of a remote machine, even with live update.
Bernhard Kaindl enhanced firescope to support accessing 64-bit machines
from 32-bit firescope and vice versa:
-- http://halobates.de/firewire/firescope-0.2.2.tar.bz2
+- http://v3.sk/~lkundrak/firescope/
and he implemented fast system dump (alpha version - read README.txt):
- http://halobates.de/firewire/firedump-0.1.tar.bz2
@@ -92,11 +88,11 @@ Step-by-step instructions for using firescope with early OHCI initialization:
1) Verify that your hardware is supported:
- Load the ohci1394 or the fw-ohci module and check your kernel logs.
+ Load the firewire-ohci module and check your kernel logs.
You should see a line similar to
- ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fe9ff800-fe9fffff]
- ... Max Packet=[2048] IR/IT contexts=[4/8]
+ firewire_ohci 0000:15:00.1: added OHCI v1.0 device as card 2, 4 IR + 4 IT
+ ... contexts, quirks 0x11
when loading the driver. If you have no supported controller, many PCI,
CardBus and even some Express cards which are fully compliant to OHCI-1394
@@ -105,6 +101,9 @@ Step-by-step instructions for using firescope with early OHCI initialization:
compliant, they are based on TI PCILynx chips and require drivers for Win-
dows operating systems.
+ The mentioned kernel log message contains ">4 GB phys DMA" in case of
+ OHCI-1394 controllers which support accesses above this limit.
+
2) Establish a working FireWire cable connection:
Any FireWire cable, as long at it provides electrically and mechanically
@@ -113,20 +112,18 @@ Step-by-step instructions for using firescope with early OHCI initialization:
If an driver is running on both machines you should see a line like
- ieee1394: Node added: ID:BUS[0-01:1023] GUID[0090270001b84bba]
+ firewire_core 0000:15:00.1: created device fw1: GUID 00061b0020105917, S400
on both machines in the kernel log when the cable is plugged in
and connects the two machines.
3) Test physical DMA using firescope:
- On the debug host,
- - load the raw1394 module,
- - make sure that /dev/raw1394 is accessible,
+ On the debug host, make sure that /dev/fw* is accessible,
then start firescope:
$ firescope
- Port 0 (ohci1394) opened, 2 nodes detected
+ Port 0 (/dev/fw1) opened, 2 nodes detected
FireScope
---------
diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt
index e9b54de8fdf7..edeecd447d23 100644
--- a/Documentation/power/basic-pm-debugging.txt
+++ b/Documentation/power/basic-pm-debugging.txt
@@ -172,7 +172,7 @@ you can boot the kernel with the 'no_console_suspend' parameter and try to log
kernel messages using the serial console. This may provide you with some
information about the reasons of the suspend (resume) failure. Alternatively,
it may be possible to use a FireWire port for debugging with firescope
-(ftp://ftp.firstfloor.org/pub/ak/firescope/). On x86 it is also possible to
+(http://v3.sk/~lkundrak/firescope/). On x86 it is also possible to
use the PM_TRACE mechanism documented in Documentation/power/s2ram.txt .
2. Testing suspend to RAM (STR)
diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c
index 0e799516a2ab..eb6935c8ad94 100644
--- a/drivers/firewire/core-transaction.c
+++ b/drivers/firewire/core-transaction.c
@@ -523,11 +523,11 @@ static DEFINE_SPINLOCK(address_handler_list_lock);
static LIST_HEAD(address_handler_list);
const struct fw_address_region fw_high_memory_region =
- { .start = 0x000100000000ULL, .end = 0xffffe0000000ULL, };
+ { .start = FW_MAX_PHYSICAL_RANGE, .end = 0xffffe0000000ULL, };
EXPORT_SYMBOL(fw_high_memory_region);
static const struct fw_address_region low_memory_region =
- { .start = 0x000000000000ULL, .end = 0x000100000000ULL, };
+ { .start = 0x000000000000ULL, .end = FW_MAX_PHYSICAL_RANGE, };
#if 0
const struct fw_address_region fw_private_region =
@@ -1217,7 +1217,7 @@ static void handle_low_memory(struct fw_card *card, struct fw_request *request,
}
static struct fw_address_handler low_memory = {
- .length = 0x000100000000ULL,
+ .length = FW_MAX_PHYSICAL_RANGE,
.address_callback = handle_low_memory,
};
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h
index 515a42c786d0..c98764aeeec6 100644
--- a/drivers/firewire/core.h
+++ b/drivers/firewire/core.h
@@ -237,6 +237,9 @@ static inline bool is_next_generation(int new_generation, int old_generation)
#define LOCAL_BUS 0xffc0
+/* arbitrarily chosen maximum range for physical DMA: 128 TB */
+#define FW_MAX_PHYSICAL_RANGE (128ULL << 40)
+
void fw_core_handle_request(struct fw_card *card, struct fw_packet *request);
void fw_core_handle_response(struct fw_card *card, struct fw_packet *packet);
int fw_get_response_length(struct fw_request *request);
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 6aa8a86cb83b..6f74d8d3f700 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -370,6 +370,10 @@ MODULE_PARM_DESC(debug, "Verbose logging (default = 0"
", busReset events = " __stringify(OHCI_PARAM_DEBUG_BUSRESETS)
", or a combination, or all = -1)");
+static bool param_remote_dma;
+module_param_named(remote_dma, param_remote_dma, bool, 0444);
+MODULE_PARM_DESC(remote_dma, "Enable unfiltered remote DMA (default = N)");
+
static void log_irqs(struct fw_ohci *ohci, u32 evt)
{
if (likely(!(param_debug &
@@ -2050,10 +2054,10 @@ static void bus_reset_work(struct work_struct *work)
be32_to_cpu(ohci->next_header));
}
-#ifdef CONFIG_FIREWIRE_OHCI_REMOTE_DMA
- reg_write(ohci, OHCI1394_PhyReqFilterHiSet, ~0);
- reg_write(ohci, OHCI1394_PhyReqFilterLoSet, ~0);
-#endif
+ if (param_remote_dma) {
+ reg_write(ohci, OHCI1394_PhyReqFilterHiSet, ~0);
+ reg_write(ohci, OHCI1394_PhyReqFilterLoSet, ~0);
+ }
spin_unlock_irq(&ohci->lock);
@@ -2363,7 +2367,7 @@ static int ohci_enable(struct fw_card *card,
reg_write(ohci, OHCI1394_FairnessControl, 0);
card->priority_budget_implemented = ohci->pri_req_max != 0;
- reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
+ reg_write(ohci, OHCI1394_PhyUpperBound, FW_MAX_PHYSICAL_RANGE >> 16);
reg_write(ohci, OHCI1394_IntEventClear, ~0);
reg_write(ohci, OHCI1394_IntMaskClear, ~0);
@@ -2587,13 +2591,13 @@ static int ohci_cancel_packet(struct fw_card *card, struct fw_packet *packet)
static int ohci_enable_phys_dma(struct fw_card *card,
int node_id, int generation)
{
-#ifdef CONFIG_FIREWIRE_OHCI_REMOTE_DMA
- return 0;
-#else
struct fw_ohci *ohci = fw_ohci(card);
unsigned long flags;
int n, ret = 0;
+ if (param_remote_dma)
+ return 0;
+
/*
* FIXME: Make sure this bitmask is cleared when we clear the busReset
* interrupt bit. Clear physReqResourceAllBuses on bus reset.
@@ -2622,7 +2626,6 @@ static int ohci_enable_phys_dma(struct fw_card *card,
spin_unlock_irqrestore(&ohci->lock, flags);
return ret;
-#endif /* CONFIG_FIREWIRE_OHCI_REMOTE_DMA */
}
static u32 ohci_read_csr(struct fw_card *card, int csr_offset)
@@ -3720,9 +3723,11 @@ static int pci_probe(struct pci_dev *dev,
version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
ohci_notice(ohci,
"added OHCI v%x.%x device as card %d, "
- "%d IR + %d IT contexts, quirks 0x%x\n",
+ "%d IR + %d IT contexts, quirks 0x%x%s\n",
version >> 16, version & 0xff, ohci->card.index,
- ohci->n_ir, ohci->n_it, ohci->quirks);
+ ohci->n_ir, ohci->n_it, ohci->quirks,
+ reg_read(ohci, OHCI1394_PhyUpperBound) ?
+ ", >4 GB phys DMA" : "");
return 0;
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e0e2eebf7ab3..dbf94a7d25a8 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1556,17 +1556,6 @@ config PROVIDE_OHCI1394_DMA_INIT
See Documentation/debugging-via-ohci1394.txt for more information.
-config FIREWIRE_OHCI_REMOTE_DMA
- bool "Remote debugging over FireWire with firewire-ohci"
- depends on FIREWIRE_OHCI
- help
- This option lets you use the FireWire bus for remote debugging
- with help of the firewire-ohci driver. It enables unfiltered
- remote DMA in firewire-ohci.
- See Documentation/debugging-via-ohci1394.txt for more information.
-
- If unsure, say N.
-
config BUILD_DOCSRC
bool "Build targets in Documentation/ tree"
depends on HEADERS_CHECK