diff options
88 files changed, 2937 insertions, 428 deletions
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt new file mode 100644 index 000000000000..078a58b0302f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt @@ -0,0 +1,34 @@ +NVIDIA Tegra Power Management Controller (PMC) + +Required properties: +- compatible: Should contain one of the following: + - "nvidia,tegra186-pmc": for Tegra186 +- reg: Must contain an (offset, length) pair of the register set for each + entry in reg-names. +- reg-names: Must include the following entries: + - "pmc" + - "wake" + - "aotag" + - "scratch" + +Optional properties: +- nvidia,invert-interrupt: If present, inverts the PMU interrupt signal. + +Example: + +SoC DTSI: + + pmc@c3600000 { + compatible = "nvidia,tegra186-pmc"; + reg = <0 0x0c360000 0 0x10000>, + <0 0x0c370000 0 0x10000>, + <0 0x0c380000 0 0x10000>, + <0 0x0c390000 0 0x10000>; + reg-names = "pmc", "wake", "aotag", "scratch"; + }; + +Board DTS: + + pmc@c360000 { + nvidia,invert-interrupt; + }; diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt index 65cc0345747d..6c1498958d48 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -1,22 +1,42 @@ Freescale i.MX General Power Controller ======================================= -The i.MX6Q General Power Control (GPC) block contains DVFS load tracking -counters and Power Gating Control (PGC) for the CPU and PU (GPU/VPU) power -domains. +The i.MX6 General Power Control (GPC) block contains DVFS load tracking +counters and Power Gating Control (PGC). Required properties: -- compatible: Should be "fsl,imx6q-gpc" or "fsl,imx6sl-gpc" +- compatible: Should be one of the following: + - fsl,imx6q-gpc + - fsl,imx6qp-gpc + - fsl,imx6sl-gpc - reg: should be register base and length as documented in the datasheet -- interrupts: Should contain GPC interrupt request 1 -- pu-supply: Link to the LDO regulator powering the PU power domain -- clocks: Clock phandles to devices in the PU power domain that need - to be enabled during domain power-up for reset propagation. -- #power-domain-cells: Should be 1, see below: +- interrupts: Should contain one interrupt specifier for the GPC interrupt +- clocks: Must contain an entry for each entry in clock-names. + See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - ipg -The gpc node is a power-controller as documented by the generic power domain -bindings in Documentation/devicetree/bindings/power/power_domain.txt. +The power domains are generic power domain providers as documented in +Documentation/devicetree/bindings/power/power_domain.txt. They are described as +subnodes of the power gating controller 'pgc' node of the GPC and should +contain the following: + +Required properties: +- reg: Must contain the DOMAIN_INDEX of this power domain + The following DOMAIN_INDEX values are valid for i.MX6Q: + ARM_DOMAIN 0 + PU_DOMAIN 1 + The following additional DOMAIN_INDEX value is valid for i.MX6SL: + DISPLAY_DOMAIN 2 + +- #power-domain-cells: Should be 0 + +Optional properties: +- clocks: a number of phandles to clocks that need to be enabled during domain + power-up sequencing to ensure reset propagation into devices located inside + this power domain +- power-supply: a phandle to the regulator powering this domain Example: @@ -25,14 +45,30 @@ Example: reg = <0x020dc000 0x4000>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, <0 90 IRQ_TYPE_LEVEL_HIGH>; - pu-supply = <®_pu>; - clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, - <&clks IMX6QDL_CLK_GPU3D_SHADER>, - <&clks IMX6QDL_CLK_GPU2D_CORE>, - <&clks IMX6QDL_CLK_GPU2D_AXI>, - <&clks IMX6QDL_CLK_OPENVG_AXI>, - <&clks IMX6QDL_CLK_VPU_AXI>; - #power-domain-cells = <1>; + clocks = <&clks IMX6QDL_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + + pd_pu: power-domain@1 { + reg = <1>; + #power-domain-cells = <0>; + power-supply = <®_pu>; + clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>, + <&clks IMX6QDL_CLK_GPU2D_CORE>, + <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_VPU_AXI>; + }; + }; }; @@ -40,20 +76,13 @@ Specifying power domain for IP modules ====================================== IP cores belonging to a power domain should contain a 'power-domains' property -that is a phandle pointing to the gpc device node and a DOMAIN_INDEX specifying -the power domain the device belongs to. +that is a phandle pointing to the power domain the device belongs to. Example of a device that is part of the PU power domain: vpu: vpu@02040000 { reg = <0x02040000 0x3c000>; /* ... */ - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; /* ... */ }; - -The following DOMAIN_INDEX values are valid for i.MX6Q: -ARM_DOMAIN 0 -PU_DOMAIN 1 -The following additional DOMAIN_INDEX value is valid for i.MX6SL: -DISPLAY_DOMAIN 2 diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt new file mode 100644 index 000000000000..02f45c65fd87 --- /dev/null +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt @@ -0,0 +1,71 @@ +Freescale i.MX General Power Controller v2 +========================================== + +The i.MX7S/D General Power Control (GPC) block contains Power Gating +Control (PGC) for various power domains. + +Required properties: + +- compatible: Should be "fsl,imx7d-gpc" + +- reg: should be register base and length as documented in the + datasheet + +- interrupts: Should contain GPC interrupt request 1 + +Power domains contained within GPC node are generic power domain +providers, documented in +Documentation/devicetree/bindings/power/power_domain.txt, which are +described as subnodes of the power gating controller 'pgc' node, +which, in turn, is expected to contain the following: + +Required properties: + +- reg: Power domain index. Valid values are defined in + include/dt-bindings/power/imx7-power.h + +- #power-domain-cells: Should be 0 + +Optional properties: + +- power-supply: Power supply used to power the domain + +Example: + + gpc: gpc@303a0000 { + compatible = "fsl,imx7d-gpc"; + reg = <0x303a0000 0x1000>; + interrupt-controller; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_pcie_phy: power-domain@3 { + #power-domain-cells = <0>; + + reg = <IMX7_POWER_DOMAIN_PCIE_PHY>; + power-supply = <®_1p0d>; + }; + }; + }; + + +Specifying power domain for IP modules +====================================== + +IP cores belonging to a power domain should contain a 'power-domains' +property that is a phandle for PGC node representing the domain. + +Example of a device that is part of the PCIE_PHY power domain: + + pcie: pcie@33800000 { + reg = <0x33800000 0x4000>, + <0x4ff00000 0x80000>; + /* ... */ + power-domains = <&pgc_pcie_phy>; + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt new file mode 100644 index 000000000000..5e1afc3d8480 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt @@ -0,0 +1,47 @@ +Freescale i.MX7 System Reset Controller +====================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "fsl,imx7-src", "syscon" +- reg: should be register base and length as documented in the + datasheet +- interrupts: Should contain SRC interrupt +- #reset-cells: 1, see below + +example: + +src: reset-controller@30390000 { + compatible = "fsl,imx7d-src", "syscon"; + reg = <0x30390000 0x2000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; +}; + + +Specifying reset lines connected to IP modules +============================================== + +The system reset controller can be used to reset various set of +peripherals. Device nodes that need access to reset lines should +specify them as a reset phandle in their corresponding node as +specified in reset.txt. + +Example: + + pcie: pcie@33800000 { + + ... + + resets = <&src IMX7_RESET_PCIEPHY>, + <&src IMX7_RESET_PCIE_CTRL_APPS_EN>; + reset-names = "pciephy", "apps"; + + ... + }; + + +For list of all valid reset indicies see +<dt-bindings/reset/imx7-reset.h> diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt new file mode 100644 index 000000000000..c705db07d820 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt @@ -0,0 +1,57 @@ +Texas Instruments TI-SCI Generic Power Domain +--------------------------------------------- + +Some TI SoCs contain a system controller (like the PMMC, etc...) that is +responsible for controlling the state of the IPs that are present. +Communication between the host processor running an OS and the system +controller happens through a protocol known as TI-SCI [1]. + +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt + +PM Domain Node +============== +The PM domain node represents the global PM domain managed by the PMMC, which +in this case is the implementation as documented by the generic PM domain +bindings in Documentation/devicetree/bindings/power/power_domain.txt. Because +this relies on the TI SCI protocol to communicate with the PMMC it must be a +child of the pmmc node. + +Required Properties: +-------------------- +- compatible: should be "ti,sci-pm-domain" +- #power-domain-cells: Must be 1 so that an id can be provided in each + device node. + +Example (K2G): +------------- + pmmc: pmmc { + compatible = "ti,k2g-sci"; + ... + + k2g_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + }; + +PM Domain Consumers +=================== +Hardware blocks belonging to a PM domain should contain a "power-domains" +property that is a phandle pointing to the corresponding PM domain node +along with an index representing the device id to be passed to the PMMC +for device control. + +Required Properties: +-------------------- +- power-domains: phandle pointing to the corresponding PM domain node + and an ID representing the device. + +See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g. + +Example (K2G): +-------------------- + uart0: serial@02530c00 { + compatible = "ns16550a"; + ... + power-domains = <&k2g_pds K2G_DEV_UART0>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 9d58e9f18705..41590d3a665a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -653,7 +653,9 @@ M: Thor Thayer <thor.thayer@linux.intel.com> S: Maintained F: drivers/gpio/gpio-altera-a10sr.c F: drivers/mfd/altera-a10sr.c +F: drivers/reset/reset-a10sr.c F: include/linux/mfd/altera-a10sr.h +F: include/dt-bindings/reset/altr,rst-mgr-a10sr.h ALTERA TRIPLE SPEED ETHERNET DRIVER M: Vince Bridgers <vbridger@opensource.altera.com> @@ -1282,6 +1284,7 @@ F: arch/arm/mach-mxs/ F: arch/arm/boot/dts/imx* F: arch/arm/configs/imx*_defconfig F: drivers/clk/imx/ +F: drivers/soc/imx/ F: include/soc/imx/ ARM/FREESCALE VYBRID ARM ARCHITECTURE @@ -12604,6 +12607,9 @@ S: Maintained F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt F: drivers/firmware/ti_sci* F: include/linux/soc/ti/ti_sci_protocol.h +F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +F: include/dt-bindings/genpd/k2g.h +F: drivers/soc/ti/ti_sci_pm_domains.c THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER M: Hans Verkuil <hverkuil@xs4all.nl> diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 9353184d730d..1181053e3ade 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -1,6 +1,3 @@ -config ICST - bool - config SA1111 bool select DMABOUNCE if !ARCH_PXA diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 27f23b15b1ea..29fdf6a3601d 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -4,7 +4,6 @@ obj-y += firmware.o -obj-$(CONFIG_ICST) += icst.o obj-$(CONFIG_SA1111) += sa1111.o obj-$(CONFIG_DMABOUNCE) += dmabounce.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 1dc2a34b9dbd..93f584ba0130 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -10,26 +10,17 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include <linux/clk.h> -#include <linux/delay.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/platform_device.h> -#include <linux/pm_domain.h> -#include <linux/reg |