Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...

110 files changed, 11995 insertions, 486 deletions

diff --git a/tools/bpf/.gitignore b/tools/bpf/.gitignore
new file mode 100644
index 000000000000..dfe2bd5a4b95
--- /dev/null
+++ b/tools/bpf/.gitignore
@@ -0,0 +1,5 @@
+FEATURE-DUMP.bpf
+bpf_asm
+bpf_dbg
+bpf_exp.yacc.*
+bpf_jit_disasm
diff --git a/tools/bpf/Makefile.helpers b/tools/bpf/Makefile.helpers
new file mode 100644
index 000000000000..c34fea77f39f
--- /dev/null
+++ b/tools/bpf/Makefile.helpers
@@ -0,0 +1,59 @@
+ifndef allow-override
+  include ../scripts/Makefile.include
+  include ../scripts/utilities.mak
+else
+  # Assume Makefile.helpers is being run from bpftool/Documentation
+  # subdirectory. Go up two more directories to fetch bpf.h header and
+  # associated script.
+  UP2DIR := ../../
+endif
+
+INSTALL ?= install
+RM ?= rm -f
+RMDIR ?= rmdir --ignore-fail-on-non-empty
+
+ifeq ($(V),1)
+  Q =
+else
+  Q = @
+endif
+
+prefix ?= /usr/local
+mandir ?= $(prefix)/man
+man7dir = $(mandir)/man7
+
+HELPERS_RST = bpf-helpers.rst
+MAN7_RST = $(HELPERS_RST)
+
+_DOC_MAN7 = $(patsubst %.rst,%.7,$(MAN7_RST))
+DOC_MAN7 = $(addprefix $(OUTPUT),$(_DOC_MAN7))
+
+helpers: man7
+man7: $(DOC_MAN7)
+
+RST2MAN_DEP := $(shell command -v rst2man 2>/dev/null)
+
+$(OUTPUT)$(HELPERS_RST): $(UP2DIR)../../include/uapi/linux/bpf.h
+	$(QUIET_GEN)$(UP2DIR)../../scripts/bpf_helpers_doc.py --filename $< > $@
+
+$(OUTPUT)%.7: $(OUTPUT)%.rst
+ifndef RST2MAN_DEP
+	$(error "rst2man not found, but required to generate man pages")
+endif
+	$(QUIET_GEN)rst2man $< > $@
+
+helpers-clean:
+	$(call QUIET_CLEAN, eBPF_helpers-manpage)
+	$(Q)$(RM) $(DOC_MAN7) $(OUTPUT)$(HELPERS_RST)
+
+helpers-install: helpers
+	$(call QUIET_INSTALL, eBPF_helpers-manpage)
+	$(Q)$(INSTALL) -d -m 755 $(DESTDIR)$(man7dir)
+	$(Q)$(INSTALL) -m 644 $(DOC_MAN7) $(DESTDIR)$(man7dir)
+
+helpers-uninstall:
+	$(call QUIET_UNINST, eBPF_helpers-manpage)
+	$(Q)$(RM) $(addprefix $(DESTDIR)$(man7dir)/,$(_DOC_MAN7))
+	$(Q)$(RMDIR) $(DESTDIR)$(man7dir)
+
+.PHONY: helpers helpers-clean helpers-install helpers-uninstall
diff --git a/tools/bpf/bpftool/.gitignore b/tools/bpf/bpftool/.gitignore
index d7e678c2d396..67167e44b726 100644
--- a/tools/bpf/bpftool/.gitignore
+++ b/tools/bpf/bpftool/.gitignore
@@ -1,3 +1,5 @@
 *.d
 bpftool
+bpftool*.8
+bpf-helpers.*
 FEATURE-DUMP.bpftool
diff --git a/tools/bpf/bpftool/Documentation/Makefile b/tools/bpf/bpftool/Documentation/Makefile
index a9d47c1558bb..f7663a3e60c9 100644
--- a/tools/bpf/bpftool/Documentation/Makefile
+++ b/tools/bpf/bpftool/Documentation/Makefile
@@ -15,12 +15,15 @@ prefix ?= /usr/local
 mandir ?= $(prefix)/man
 man8dir = $(mandir)/man8
 
-MAN8_RST = $(wildcard *.rst)
+# Load targets for building eBPF helpers man page.
+include ../../Makefile.helpers
+
+MAN8_RST = $(filter-out $(HELPERS_RST),$(wildcard *.rst))
 
 _DOC_MAN8 = $(patsubst %.rst,%.8,$(MAN8_RST))
 DOC_MAN8 = $(addprefix $(OUTPUT),$(_DOC_MAN8))
 
-man: man8
+man: man8 helpers
 man8: $(DOC_MAN8)