The next round of scheduled OSS code removal

This patch contains the next round of scheduled OSS code removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

19 files changed, 0 insertions, 11360 deletions

diff --git a/sound/oss/Makefile b/sound/oss/Makefile
index 1200670017bd..f883c4b676ab 100644
--- a/sound/oss/Makefile
+++ b/sound/oss/Makefile
@@ -36,7 +36,6 @@ obj-$(CONFIG_SOUND_MSNDCLAS)	+= msnd.o msnd_classic.o
 obj-$(CONFIG_SOUND_MSNDPIN)	+= msnd.o msnd_pinnacle.o
 obj-$(CONFIG_SOUND_VWSND)	+= vwsnd.o
 obj-$(CONFIG_SOUND_ICH)		+= i810_audio.o ac97_codec.o
-obj-$(CONFIG_SOUND_ES1371)	+= es1371.o ac97_codec.o
 obj-$(CONFIG_SOUND_AU1550_AC97)	+= au1550_ac97.o ac97_codec.o
 obj-$(CONFIG_SOUND_TRIDENT)	+= trident.o ac97_codec.o
 obj-$(CONFIG_SOUND_BCM_CS4297A)	+= swarm_cs4297a.o
diff --git a/sound/oss/dmasound/Makefile b/sound/oss/dmasound/Makefile
index 4611636b1a81..3c1531652d11 100644
--- a/sound/oss/dmasound/Makefile
+++ b/sound/oss/dmasound/Makefile
@@ -2,12 +2,6 @@
 # Makefile for the DMA sound driver
 #
 
-dmasound_pmac-y			+= dmasound_awacs.o \
-				   trans_16.o dac3550a.o tas_common.o \
-				   tas3001c.o tas3001c_tables.o \
-				   tas3004.o tas3004_tables.o
-
 obj-$(CONFIG_DMASOUND_ATARI)	+= dmasound_core.o dmasound_atari.o
-obj-$(CONFIG_DMASOUND_PMAC)	+= dmasound_core.o dmasound_pmac.o
 obj-$(CONFIG_DMASOUND_PAULA)	+= dmasound_core.o dmasound_paula.o
 obj-$(CONFIG_DMASOUND_Q40)	+= dmasound_core.o dmasound_q40.o
diff --git a/sound/oss/dmasound/awacs_defs.h b/sound/oss/dmasound/awacs_defs.h
deleted file mode 100644
index 2194f46b046c..000000000000
--- a/sound/oss/dmasound/awacs_defs.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/*********************************************************/
-/* This file was written by someone, somewhere, sometime */
-/* And is released into the Public Domain                */
-/*********************************************************/
-
-#ifndef _AWACS_DEFS_H_
-#define _AWACS_DEFS_H_
-
-/*******************************/
-/* AWACs Audio Register Layout */
-/*******************************/
-
-struct awacs_regs {
-    unsigned	control;	/* Audio control register */
-    unsigned	pad0[3];
-    unsigned	codec_ctrl;	/* Codec control register */
-    unsigned	pad1[3];
-    unsigned	codec_stat;	/* Codec status register */
-    unsigned	pad2[3];
-    unsigned	clip_count;	/* Clipping count register */
-    unsigned	pad3[3];
-    unsigned	byteswap;	/* Data is little-endian if 1 */
-};
-
-/*******************/
-/* Audio Bit Masks */
-/*******************/
-
-/* Audio Control Reg Bit Masks */
-/* ----- ------- --- --- ----- */
-#define MASK_ISFSEL	(0xf)		/* Input SubFrame Select */
-#define MASK_OSFSEL	(0xf << 4)	/* Output SubFrame Select */
-#define MASK_RATE	(0x7 << 8)	/* Sound Rate */
-#define MASK_CNTLERR	(0x1 << 11)	/* Error */
-#define MASK_PORTCHG	(0x1 << 12)	/* Port Change */
-#define MASK_IEE	(0x1 << 13)	/* Enable Interrupt on Error */
-#define MASK_IEPC	(0x1 << 14)	/* Enable Interrupt on Port Change */
-#define MASK_SSFSEL	(0x3 << 15)	/* Status SubFrame Select */
-
-/* Audio Codec Control Reg Bit Masks */
-/* ----- ----- ------- --- --- ----- */
-#define MASK_NEWECMD	(0x1 << 24)	/* Lock: don't write to reg when 1 */
-#define MASK_EMODESEL	(0x3 << 22)	/* Send info out on which frame? */
-#define MASK_EXMODEADDR	(0x3ff << 12)	/* Extended Mode Address -- 10 bits */
-#define MASK_EXMODEDATA	(0xfff)		/* Extended Mode Data -- 12 bits */
-
-/* Audio Codec Control Address Values / Masks */
-/* ----- ----- ------- ------- ------ - ----- */
-#define MASK_ADDR0	(0x0 << 12)	/* Expanded Data Mode Address 0 */
-#define MASK_ADDR_MUX	MASK_ADDR0	/* Mux Control */
-#define MASK_ADDR_GAIN	MASK_ADDR0
-
-#define MASK_ADDR1	(0x1 << 12)	/* Expanded Data Mode Address 1 */
-#define MASK_ADDR_MUTE	MASK_ADDR1
-#define MASK_ADDR_RATE	MASK_ADDR1
-
-#define MASK_ADDR2	(0x2 << 12)	/* Expanded Data Mode Address 2 */
-#define MASK_ADDR_VOLA	MASK_ADDR2	/* Volume Control A -- Headphones */
-#define MASK_ADDR_VOLHD MASK_ADDR2
-
-#define MASK_ADDR4	(0x4 << 12)	/* Expanded Data Mode Address 4 */
-#define MASK_ADDR_VOLC	MASK_ADDR4	/* Volume Control C -- Speaker */
-#define MASK_ADDR_VOLSPK MASK_ADDR4
-
-/* additional registers of screamer */
-#define MASK_ADDR5	(0x5 << 12)	/* Expanded Data Mode Address 5 */
-#define MASK_ADDR6	(0x6 << 12)	/* Expanded Data Mode Address 6 */
-#define MASK_ADDR7	(0x7 << 12)	/* Expanded Data Mode Address 7 */
-
-/* Address 0 Bit Masks & Macros */
-/* ------- - --- ----- - ------ */
-#define MASK_GAINRIGHT	(0xf)		/* Gain Right Mask */
-#define MASK_GAINLEFT	(0xf << 4)	/* Gain Left Mask */
-#define MASK_GAINLINE	(0x1 << 8)	/* Disable Mic preamp */
-#define MASK_GAINMIC	(0x0 << 8)	/* Enable Mic preamp */
-
-#define MASK_MUX_CD	(0x1 << 9)	/* Select CD in MUX */
-#define MASK_MUX_MIC	(0x1 << 10)	/* Select Mic in MUX */
-#define MASK_MUX_AUDIN	(0x1 << 11)	/* Select Audio In in MUX */
-#define MASK_MUX_LINE	MASK_MUX_AUDIN
-
-#define GAINRIGHT(x)	((x) & MASK_GAINRIGHT)
-#define GAINLEFT(x)	(((x) << 4) & MASK_GAINLEFT)
-
-#define DEF_CD_GAIN 0x00bb
-#define DEF_MIC_GAIN 0x00cc
-
-/* Address 1 Bit Masks */
-/* ------- - --- ----- */
-#define MASK_ADDR1RES1	(0x3)		/* Reserved */
-#define MASK_RECALIBRATE (0x1 << 2)	/* Recalibrate */
-#define MASK_SAMPLERATE	(0x7 << 3)	/* Sample Rate: */
-#define MASK_LOOPTHRU	(0x1 << 6)	/* Loopthrough Enable */
-#define MASK_CMUTE	(0x1 << 7)	/* Output C (Speaker) Mute when 1 */
-#define MASK_SPKMUTE	MASK_CMUTE
-#define MASK_ADDR1RES2	(0x1 << 8)	/* Reserved */
-#define MASK_AMUTE	(0x1 << 9)	/* Output A (Headphone) Mute when 1 */
-#define MASK_HDMUTE	MASK_AMUTE
-#define MASK_PAROUT0	(0x1 << 10)	/* Parallel Output 0 */
-#define MASK_PAROUT1	(0x2 << 10)	/* Parallel Output 1 */
-
-#define MASK_MIC_BOOST  (0x4)           /* screamer mic boost */
-
-#define SAMPLERATE_48000	(0x0 << 3)	/* 48 or 44.1 kHz */
-#define SAMPLERATE_32000	(0x1 << 3)	/* 32 or 29.4 kHz */
-#define SAMPLERATE_24000	(0x2 << 3)	/* 24 or 22.05 kHz */
-#define SAMPLERATE_19200	(0x3 << 3)	/* 19.2 or 17.64 kHz */
-#define SAMPLERATE_16000	(0x4 << 3)	/* 16 or 14.7 kHz */
-#define SAMPLERATE_12000	(0x5 << 3)	/* 12 or 11.025 kHz */
-#define SAMPLERATE_9600		(0x6 << 3)	/* 9.6 or 8.82 kHz */
-#define SAMPLERATE_8000		(0x7 << 3)	/* 8 or 7.35 kHz */
-
-/* Address 2 & 4 Bit Masks & Macros */
-/* ------- - - - --- ----- - ------ */
-#define MASK_OUTVOLRIGHT (0xf)		/* Output Right Volume */
-#define MASK_ADDR2RES1	(0x2 << 4)	/* Reserved */
-#define MASK_ADDR4RES1	MASK_ADDR2RES1
-#define MASK_OUTVOLLEFT	(0xf << 6)	/* Output Left Volume */
-#define MASK_ADDR2RES2	(0x2 << 10)	/* Reserved */
-#define MASK_ADDR4RES2	MASK_ADDR2RES2
-
-#define VOLRIGHT(x)	(((~(x)) & MASK_OUTVOLRIGHT))
-#define VOLLEFT(x)	(((~(x)) << 6) & MASK_OUTVOLLEFT)
-
-/* Audio Codec Status Reg Bit Masks */
-/* ----- ----- ------ --- --- ----- */
-#define MASK_EXTEND	(0x1 << 23)	/* Extend */
-#define MASK_VALID	(0x1 << 22)	/* Valid Data? */
-#define MASK_OFLEFT	(0x1 << 21)	/* Overflow Left */
-#define MASK_OFRIGHT	(0x1 << 20)	/* Overflow Right */
-#define MASK_ERRCODE	(0xf << 16)	/* Error Code */
-#define MASK_REVISION	(0xf << 12)	/* Revision Number */
-#define MASK_MFGID	(0xf << 8)	/* Mfg. ID */
-#define MASK_CODSTATRES	(0xf << 4)	/* bits 4 - 7 reserved */
-#define MASK_INPPORT	(0xf)		/* Input Port */
-#define MASK_HDPCONN	8		/* headphone plugged in */
-
-/* Clipping Count Reg Bit Masks */
-/* -------- ----- --- --- ----- */
-#define MASK_CLIPLEFT	(0xff << 7)	/* Clipping Count, Left Channel */
-#define MASK_CLIPRIGHT	(0xff)		/* Clipping Count, Right Channel */
-
-/* DBDMA ChannelStatus Bit Masks */
-/* ----- ------------- --- ----- */
-#define MASK_CSERR	(0x1 << 7)	/* Error */
-#define MASK_EOI	(0x1 << 6)	/* End of Input -- only for Input Channel */
-#define MASK_CSUNUSED	(0x1f << 1)	/* bits 1-5 not used */
-#define MASK_WAIT	(0x1)		/* Wait */
-
-/* Various Rates */
-/* ------- ----- */
-#define RATE_48000	(0x0 << 8)	/* 48 kHz */
-#define RATE_44100	(0x0 << 8)	/* 44.1 kHz */
-#define RATE_32000	(0x1 << 8)	/* 32 kHz */
-#define RATE_29400	(0x1 << 8)	/* 29.4 kHz */
-#define RATE_24000	(0x2 << 8)	/* 24 kHz */
-#define RATE_22050	(0x2 << 8)	/* 22.05 kHz */
-#define RATE_19200	(0x3 << 8)	/* 19.2 kHz */
-#define RATE_17640	(0x3 << 8)	/* 17.64 kHz */
-#define RATE_16000	(0x4 << 8)	/* 16 kHz */
-#define RATE_14700	(0x4 << 8)	/* 14.7 kHz */
-#define RATE_12000	(0x5 << 8)	/* 12 kHz */
-#define RATE_11025	(0x5 << 8)	/* 11.025 kHz */
-#define RATE_9600	(0x6 << 8)	/* 9.6 kHz */
-#define RATE_8820	(0x6 << 8)	/* 8.82 kHz */
-#define RATE_8000	(0x7 << 8)	/* 8 kHz */
-#define RATE_7350	(0x7 << 8)	/* 7.35 kHz */
-
-#define RATE_LOW	1	/* HIGH = 48kHz, etc;  LOW = 44.1kHz, etc. */
-
-/*******************/
-/* Burgundy values */
-/*******************/
-
-#define MASK_ADDR_BURGUNDY_INPSEL21 (0x11 << 12)
-#define MASK_ADDR_BURGUNDY_INPSEL3 (0x12 << 12)
-
-#define MASK_ADDR_BURGUNDY_GAINCH1 (0x13 << 12)
-#define MASK_ADDR_BURGUNDY_GAINCH2 (0x14 << 12)
-#define MASK_ADDR_BURGUNDY_GAINCH3 (0x15 << 12)
-#define MASK_ADDR_BURGUNDY_GAINCH4 (0x16 << 12)
-
-#define MASK_ADDR_BURGUNDY_VOLCH1 (0x20 << 12)
-#define MASK_ADDR_BURGUNDY_VOLCH2 (0x21 << 12)
-#define MASK_ADDR_BURGUNDY_VOLCH3 (0x22 << 12)
-#define MASK_ADDR_BURGUNDY_VOLCH4 (0x23 << 12)
-
-#define MASK_ADDR_BURGUNDY_OUTPUTSELECTS (0x2B << 12)
-#define MASK_ADDR_BURGUNDY_OUTPUTENABLES (0x2F << 12)
-
-#define MASK_ADDR_BURGUNDY_MASTER_VOLUME (0x30 << 12)
-
-#define MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES (0x60 << 12)
-
-#define MASK_ADDR_BURGUNDY_ATTENSPEAKER (0x62 << 12)
-#define MASK_ADDR_BURGUNDY_ATTENLINEOUT (0x63 << 12)
-#define MASK_ADDR_BURGUNDY_ATTENHP (0x64 << 12)
-
-#define MASK_ADDR_BURGUNDY_VOLCD (MASK_ADDR_BURGUNDY_VOLCH1)
-#define MASK_ADDR_BURGUNDY_VOLLINE (MASK_ADDR_BURGUNDY_VOLCH2)
-#define MASK_ADDR_BURGUNDY_VOLMIC (MASK_ADDR_BURGUNDY_VOLCH3)
-#define MASK_ADDR_BURGUNDY_VOLMODEM (MASK_ADDR_BURGUNDY_VOLCH4)
-
-#define MASK_ADDR_BURGUNDY_GAINCD (MASK_ADDR_BURGUNDY_GAINCH1)
-#define MASK_ADDR_BURGUNDY_GAINLINE (MASK_ADDR_BURGUNDY_GAINCH2)
-#define MASK_ADDR_BURGUNDY_GAINMIC (MASK_ADDR_BURGUNDY_GAINCH3)
-#define MASK_ADDR_BURGUNDY_GAINMODEM (MASK_ADDR_BURGUNDY_VOLCH4)
-
-
-/* These are all default values for the burgundy */
-#define DEF_BURGUNDY_INPSEL21 (0xAA)
-#define DEF_BURGUNDY_INPSEL3 (0x0A)
-
-#define DEF_BURGUNDY_GAINCD (0x33)
-#define DEF_BURGUNDY_GAINLINE (0x44)
-#define DEF_BURGUNDY_GAINMIC (0x44)
-#define DEF_BURGUNDY_GAINMODEM (0x06)
-
-/* Remember: lowest volume here is 0x9b */
-#define DEF_BURGUNDY_VOLCD (0xCCCCCCCC)
-#define DEF_BURGUNDY_VOLLINE (0x00000000)
-#define DEF_BURGUNDY_VOLMIC (0x00000000)
-#define DEF_BURGUNDY_VOLMODEM (0xCCCCCCCC)
-
-#define DEF_BURGUNDY_OUTPUTSELECTS (0x010f010f)
-#define DEF_BURGUNDY_OUTPUTENABLES (0x0A)
-
-#define DEF_BURGUNDY_MASTER_VOLUME (0xFFFFFFFF)
-
-#define DEF_BURGUNDY_MORE_OUTPUTENABLES (0x7E)
-
-#define DEF_BURGUNDY_ATTENSPEAKER (0x44)
-#define DEF_BURGUNDY_ATTENLINEOUT (0xCC)
-#define DEF_BURGUNDY_ATTENHP (0xCC)
-
-/*********************/
-/* i2s layout values */
-/*********************/
-
-#define I2S_REG_INT_CTL			0x00
-#define I2S_REG_SERIAL_FORMAT		0x10
-#define I2S_REG_CODEC_MSG_OUT		0x20
-#define I2S_REG_CODEC_MSG_IN		0x30
-#define I2S_REG_FRAME_COUNT		0x40
-#define I2S_REG_FRAME_MATCH		0x50
-#define I2S_REG_DATAWORD_SIZES		0x60
-#define I2S_REG_PEAKLEVEL_SEL		0x70
-#define I2S_REG_PEAKLEVEL_IN0		0x80
-#define I2S_REG_PEAKLEVEL_IN1		0x90
-
-#endif /* _AWACS_DEFS_H_ */
diff --git a/sound/oss/dmasound/dac3550a.c b/sound/oss/dmasound/dac3550a.c
deleted file mode 100644
index 0f0d03a55dab..000000000000
--- a/sound/oss/dmasound/dac3550a.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Driver for the i2c/i2s based DAC3550a sound chip used
- * on some Apple iBooks. Also known as "DACA".
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/ioport.h>
-#include <linux/sysctl.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-
-#include "dmasound.h"
-
-/* FYI: This code was derived from the tas3001c.c Texas/Tumbler mixer
- * control code, as well as info derived from the AppleDACAAudio driver
- * from Darwin CVS (main thing I derived being register numbers and 
- * values, as well as when to make the calls). */
-
-#define I2C_DRIVERID_DACA (0xFDCB)
-
-#define DACA_VERSION	"0.1"
-#define DACA_DATE "20010930"
-
-static int cur_left_vol;
-static int cur_right_vol;
-static struct i2c_client *daca_client;
-
-static int daca_attach_adapter(struct i2c_adapter *adapter);
-static int daca_detect_client(struct i2c_adapter *adapter, int address);
-static int daca_detach_client(struct i2c_client *client);
-
-struct i2c_driver daca_driver = {  
-	.driver = {
-		.name		= "DAC3550A driver  V " DACA_VERSION,
-	},
-	.id			= I2C_DRIVERID_DACA,
-	.attach_adapter		= daca_attach_adapter,
-	.detach_client		= daca_detach_client,
-};
-
-#define VOL_MAX ((1<<20) - 1)
-
-void daca_get_volume(uint * left_vol, uint  *right_vol)
-{
-	*left_vol = cur_left_vol >> 5;
-	*right_vol = cur_right_vol >> 5;
-}
-
-int daca_set_volume(uint left_vol, uint right_vol)
-{
-	unsigned short voldata;
-  
-	if (!daca_client)
-		return -1;
-
-	/* Derived from experience, not from any specific values */
-	left_vol <<= 5;
-	right_vol <<= 5;
-
-	if (left_vol > VOL_MAX)
-		left_vol = VOL_MAX;
-	if (right_vol > VOL_MAX)
-		right_vol = VOL_MAX;
-
-	voldata = ((left_vol >> 14)  & 0x3f) << 8;
-	voldata |= (right_vol >> 14)  & 0x3f;
-  
-	if (i2c_smbus_write_word_data(daca_client, 2, voldata) < 0) {
-		printk("daca: failed to set volume \n");
-		return -1; 
-	}
-
-	cur_left_vol = left_vol;
-	cur_right_vol = right_vol;
-  
-	return 0;
-}
-
-int daca_leave_sleep(void)
-{
-	if (!daca_client)
-		return -1;
-  
-	/* Do a short sleep, just to make sure I2C bus is awake and paying
-	 * attention to us
-	 */
-	msleep(20);
-	/* Write the sample rate reg the value it needs */
-	i2c_smbus_write_byte_data(daca_client, 1, 8);
-	daca_set_volume(cur_left_vol >> 5, cur_right_vol >> 5);
-	/* Another short delay, just to make sure the other I2C bus writes
-	 * have taken...
-	 */
-	msleep(20);
-	/* Write the global config reg - invert right power amp,
-	 * DAC on, use 5-volt mode */
-	i2c_smbus_write_byte_data(daca_client, 3, 0x45);
-
-	return 0;
-}
-
-int daca_enter_sleep(void)
-{
-	if (!daca_client)
-		return -1;
-
-	i2c_smbus_write_byte_data(daca_client, 1, 8);
-	daca_set_volume(cur_left_vol >> 5, cur_right_vol >> 5);
-
-	/* Write the global config reg - invert right power amp,
-	 * DAC on, enter low-power mode, use 5-volt mode
-	 */
-	i2c_smbus_write_byte_data(daca_client, 3, 0x65);
-
-	return 0;
-}
-
-static int daca_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!strncmp(adapter->name, "mac-io", 6))
-		daca_detect_client(adapter, 0x4d);
-	return 0;
-}
-
-static int daca_init_client(struct i2c_client * new_client)
-{
-	/* 
-	 * Probe is not working with the current i2c-keywest
-	 * driver. We try to use addr 0x4d on each adapters
-	 * instead, by setting the format register.
-	 * 
-	 * FIXME: I'm sure that can be obtained from the
-	 * device-tree. --BenH.
-	 */
-  
-	/* Write the global config reg - invert right power amp,
-	 * DAC on, use 5-volt mode
-	 */
-	if (i2c_smbus_write_byte_data(new_client, 3, 0x45))
-		return -1;
-
-	i2c_smbus_write_byte_data(new_client, 1, 8);
-	daca_client = new_client;
-	daca_set_volume(15000, 15000);
-
-	return 0;
-}
-
-static int daca_detect_client(struct i2c_adapter *adapter, int address)
-{
-	const char *client_name = "DAC 3550A Digital Equalizer";
-	struct i2c_client *new_client;
-	int rc = -ENODEV;
-
-	new_client = kzalloc(sizeof(*new_client), GFP_KERNEL);
-	if (!new_client)
-		return -ENOMEM;
-
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &daca_driver;
-	new_client->flags = 0;
-	strcpy(new_client->name, client_name);
-
-	if (daca_init_client(new_client))
-		goto bail;
-
-	/* Tell the i2c layer a new client has arrived */
-	if (i2c_attach_client(new_client))
-		goto bail;
-
-	return 0;
- bail:
-	kfree(new_client);
-	return rc;
-}
-
-
-static int daca_detach_client(struct i2c_client *client)
-{
-	if (client == daca_client)
-		daca_client = NULL;
-
-  	i2c_detach_client(client);
-	kfree(client);
-	return 0;
-}
-
-void daca_cleanup(void)
-{
-	i2c_del_driver(&daca_driver);
-}
-
-int daca_init(void)
-{
-	printk("dac3550a driver version %s (%s)\n",DACA_VERSION,DACA_DATE);
-	return i2c_add_driver(&daca_driver);
-}
diff --git a/sound/oss/dmasound/dmasound.h b/sound/oss/dmasound/dmasound.h
index 25dd5a318eb4..d978b0096564 100644
--- a/sound/oss/dmasound/dmasound.h
+++ b/sound/oss/dmasound/dmasound.h
@@ -59,7 +59,6 @@ static inline int ioctl_return(int __user *addr, int value)
      */
 
 #undef HAS_8BIT_TABLES
-#undef HAS_RECORD
 
 #if defined(CONFIG_DMASOUND_ATARI) || defined(CONFIG_DMASOUND_ATARI_MODULE) ||\
     defined(CONFIG_DMASOUND_PAULA) || defined(CONFIG_DMASOUND_PAULA_MODULE) ||\
@@ -83,10 +82,6 @@ static inline int ioctl_return(int __user *addr, int value)
 #define DEFAULT_N_BUFFERS 4
 #define DEFAULT_BUFF_SIZE (1<<15)
 
-#if defined(CONFIG_DMASOUND_PMAC) || defined(CONFIG_DMASOUND_PMAC_MODULE)
-#define HAS_RECORD
-#endif
-
     /*
      *  Initialization
      */
@@ -168,9 +163,6 @@ struct sound_settings {
     SETTINGS soft;	/* software settings */
     SETTINGS dsp;	/* /dev/dsp default settings */
     TRANS *trans_write;	/* supported translations */
-#ifdef HAS_RECORD
-    TRANS *trans_read;	/* supported translations */
-#endif
     int volume_left;	/* volume (range is machine dependent) */
     int volume_right;
     int bass;		/* tone (range is machine dependent) */
@@ -253,11 +245,6 @@ struct sound_queue {
 extern struct sound_queue dmasound_write_sq;
 #define write_sq	dmasound_write_sq
 
-#ifdef HAS_RECORD
-extern struct sound_queue dmasound_read_sq;
-#define read_sq		dmasound_read_sq
-#endif
-
 extern int dmasound_catchRadius;
 #define catchRadius	dmasound_catchRadius
 
diff --git a/sound/oss/dmasound/dmasound_awacs.c b/sound/oss/dmasound/dmasound_awacs.c
deleted file mode 100644
index 8f6388004f44..000000000000
--- a/sound/oss/dmasound/dmasound_awacs.c
+++ /dev/null
@@ -1,3215 +0,0 @@
-/*
- *  linux/sound/oss/dmasound/dmasound_awacs.c
- *
- *  PowerMac `AWACS' and `Burgundy' DMA Sound Driver
- *  with some limited support for DACA & Tumbler
- *
- *  See linux/sound/oss/dmasound/dmasound_core.c for copyright and
- *  history prior to 2001/01/26.
- *
- *	26/01/2001 ed 0.1 Iain Sandoe
- *		- added version info.
- *		- moved dbdma command buffer allocation to PMacXXXSqSetup()
- *		- fixed up beep dbdma cmd buffers
- *
- *	08/02/2001 [0.2]
- *		- make SNDCTL_DSP_GETFMTS return the correct info for the h/w
- *		- move soft format translations to a separate file
- *		- [0.3] make SNDCTL_DSP_GETCAPS return correct info.
- *		- [0.4] more informative machine name strings.
- *		- [0.5]
- *		- record changes.
- *		- made the default_hard/soft entries.
- *	04/04/2001 [0.6]
- *		- minor correction to bit assignments in awacs_defs.h
- *		- incorporate mixer changes from 2.2.x back-port.
- *		- take out passthru as a rec input (it isn't).
- *              - make Input Gain slider work the 'right way up'.
- *              - try to make the mixer sliders more logical - so now the
- *                input selectors are just two-state (>50% == ON) and the
- *                Input Gain slider handles the rest of the gain issues.
- *              - try to pick slider representations that most closely match
- *                the actual use - e.g. IGain for input gain... 
- *              - first stab at over/under-run detection.
- *		- minor cosmetic changes to IRQ identification.
- *		- fix bug where rates > max would be reported as supported.
- *              - first stab at over/under-run detection.
- *              - make use of i2c for mixer settings conditional on perch
- *                rather than cuda (some machines without perch have cuda).
- *              - fix bug where TX stops when dbdma status comes up "DEAD"
- *		  so far only reported on PowerComputing clones ... but.
- *		- put in AWACS/Screamer register write timeouts.
- *		- part way to partitioning the init() stuff
- *		- first pass at 'tumbler' stuff (not support - just an attempt
- *		  to allow the driver to load on new G4s).
- *      01/02/2002 [0.7] - BenH
- *	        - all sort of minor bits went in since the latest update, I
- *	          bumped the version number for that reason
- *
- *      07/26/2002 [0.8] - BenH
- *	        - More minor bits since last changelog (I should be more careful
- *	          with those)
- *	        - Support for snapper & better tumbler integration by Toby Sargeant
- *	        - Headphone detect for scremer by Julien Blache
- *	        - More tumbler fixed by Andreas Schwab
- *	11/29/2003 [0.8.1] - Renzo Davoli (King Enzo)
- *		- Support for Snapper line in
- *		- snapper input resampling (for rates < 44100)
- *		- software line gain control
- */
-
-/* GENERAL FIXME/TODO: check that the assumptions about what is written to
-   mac-io is valid for DACA & Tumbler.
-
-   This driver is in bad need of a rewrite. The dbdma code has to be split,
-   some proper device-tree parsing code has to be written, etc...
-*/
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/soundcard.h>
-#include <linux/adb.h>
-#include <linux/nvram.h>
-#include <linux/tty.h>
-#include <linux/vt_kern.h>
-#include <linux/spinlock.h>
-#include <linux/kmod.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/mutex.h>
-#ifdef CONFIG_ADB_CUDA
-#include <linux/cuda.h>
-#endif
-#ifdef CONFIG_ADB_PMU
-#include <linux/pmu.h>
-#endif
-
-#include <asm/uaccess.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/dbdma.h>
-#include <asm/pmac_feature.h>
-#include <asm/irq.h>
-#include <asm/nvram.h>
-
-#include "awacs_defs.h"
-#include "dmasound.h"
-#include "tas3001c.h"
-#include "tas3004.h"
-#include "tas_common.h"
-
-#define DMASOUND_AWACS_REVISION	0
-#define DMASOUND_AWACS_EDITION	7
-
-#define AWACS_SNAPPER   110	/* fake revision # for snapper */
-#define AWACS_BURGUNDY	100	/* fake revision # for burgundy */
-#define AWACS_TUMBLER    90	/* fake revision # for tumbler */
-#define AWACS_DACA	 80	/* fake revision # for daca (ibook) */
-#define AWACS_AWACS       2     /* holding revision for AWACS */
-#define AWACS_SCREAMER    3     /* holding revision for Screamer */
-/*
- * Interrupt numbers and addresses, & info obtained from the device tree.
- */
-static int awacs_irq, awacs_tx_irq, awacs_rx_irq;
-static volatile struct awacs_regs __iomem *awacs;
-static volatile u32 __iomem *i2s;
-static volatile struct dbdma_regs __iomem *awacs_txdma, *awacs_rxdma;
-static int awacs_rate_index;
-static int awacs_subframe;
-static struct device_node* awacs_node;
-static struct device_node* i2s_node;
-static struct resource awacs_rsrc[3];
-
-static char awacs_name[64];
-static int awacs_revision;
-static int awacs_sleeping;
-static DEFINE_MUTEX(dmasound_mutex);
-
-static int sound_device_id;		/* exists after iMac revA */
-static int hw_can_byteswap = 1 ;	/* most pmac sound h/w can */
-
-/* model info */
-/* To be replaced with better interaction with pmac_feature.c */
-static int is_pbook_3X00;
-static int is_pbook_g3;
-
-/* expansion info */
-static int has_perch;
-static int has_ziva;
-
-/* for earlier powerbooks which need fiddling with mac-io to enable
- * cd etc.
-*/
-static unsigned char __iomem *latch_base;
-static unsigned char __iomem *macio_base;
-
-/*
- * Space for the DBDMA command blocks.
- */
-static void *awacs_tx_cmd_space;
-static volatile struct dbdma_cmd *awacs_tx_cmds;
-static int number_of_tx_cmd_buffers;
-
-static void *awacs_rx_cmd_space;
-static volatile struct dbdma_cmd *awacs_rx_cmds;
-static int number_of_rx_cmd_buffers;
-
-/*
- * Cached values of AWACS registers (we can't read them).
- * Except on the burgundy (and screamer). XXX
- */
-
-int awacs_reg[8];
-int awacs_reg1_save;
-
-/* tracking values for the mixer contents
-*/
-
-static int spk_vol;
-static int line_vol;
-static int passthru_vol;
-
-static int ip_gain;           /* mic preamp settings */
-static int rec_lev = 0x4545 ; /* default CD gain 69 % */
-static int mic_lev;
-static int cd_lev = 0x6363 ; /* 99 % */
-static int line_lev;
-
-static int hdp_connected;
-
-/*
- * Stuff for outputting a beep.  The values range from -327 to +327
- * so we can multiply by an amplitude in the range 0..100 to get a
- * signed short value to put in the output buffer.
- */
-static short beep_wform[256] = {
-	0,	40,	79,	117,	153,	187,	218,	245,
-	269,	288,	304,	316,	323,	327,	327,	324,
-	318,	310,	299,	288,	275,	262,	249,	236,
-	224,	213,	204,	196,	190,	186,	183,	182,
-	182,	183,	186,	189,	192,	196,	200,	203,
-	206,	208,	209,	209,	209,	207,	204,	201,
-	197,	193,	188,	183,	179,	174,	170,	166,
-	163,	161,	160,	159,	159,	160,	161,	162,
-	164,	166,	168,	169,	171,	171,	171,	170,
-	169,	167,	163,	159,	155,	150,	144,	139,
-	133,	128,	122,	117,	113,	110,	107,	105,
-	103,	103,	103,	103,	104,	104,	105,	105,
-	105,	103,	101,	97,	92,	86,	78,	68,
-	58,	45,	32,	18,	3,	-11,	-26,	-41,
-	-55,	-68,	-79,	-88,	-95,	-100,	-102,	-102,
-	-99,	-93,	-85,	-75,	-62,	-48,	-33,	-16,
-	0,	16,	33,	48,	62,	75,	85,	93,
-	99,	102,	102,	100,	95,	88,	79,	68,
-	55,	41,	26,	11,	-3,	-18,	-32,	-45,
-	-58,	-68,	-78,	-86,	-92,	-97,	-101,	-103,
-	-105,	-105,	-105,	-104,	-104,	-103,	-103,	-103,
-	-103,	-105,	-107,	-110,	-113,	-117,	-122,	-128,
-	-133,	-139,	-144,	-150,	-155,	-159,	-163,	-167,
-	-169,	-170,	-171,	-171,	-171,	-169,	-168,	-166,
-	-164,	-162,	-161,	-160,	-159,	-159,	-160,	-161,
-	-163,	-166,	-170,	-174,	-179,	-183,	-188,	-193,
-	-197,	-201,	-204,	-207,	-209,	-209,	-209,	-208,
-	-206,	-203,	-200,	-196,	-192,	-189,	-186,	-183,
-	-182,	-182,	-183,	-186,	-190,	-196,	-204,	-213,
-	-224,	-236,	-249,	-262,	-275,	-288,	-299,	-310,
-	-318,	-324,	-327,	-327,	-323,	-316,	-304,	-288,
-	-269,	-245,	-218,	-187,	-153,	-117,	-79,	-40,
-};
-
-/* beep support */
-#define BEEP_SRATE	22050	/* 22050 Hz sample rate */
-#define BEEP_BUFLEN	512
-#define BEEP_VOLUME	15	/* 0 - 100 */
-
-static int beep_vol = BEEP_VOLUME;
-static int beep_playing;
-static int awacs_beep_state;
-static short *beep_buf;
-static void *beep_dbdma_cmd_space;
-static volatile struct dbdma_cmd *beep_dbdma_cmd;
-
-/* Burgundy functions */
-static void awacs_burgundy_wcw(unsigned addr,unsigned newval);
-static unsigned awacs_burgundy_rcw(unsigned addr);
-static void awacs_burgundy_write_volume(unsigned address, int volume);
-static int awacs_burgundy_read_volume(unsigned address);
-static void awacs_burgundy_write_mvolume(unsigned address, int volume);
-static int awacs_burgundy_read_mvolume(unsigned address);
-
-/* we will allocate a single 'emergency' dbdma cmd block to use if the
-   tx status comes up "DEAD".  This happens on some PowerComputing Pmac
-   clones, either owing to a bug in dbdma or some interaction between
-   IDE and sound.  However, this measure would deal with DEAD status if
-   if appeared elsewhere.
-
-   for the sake of memory efficiency we'll allocate this cmd as part of
-   the beep cmd stuff.
-*/
-
-static volatile struct dbdma_cmd *emergency_dbdma_cmd;
-
-#ifdef CONFIG_PM
-/*
- * Stuff for restoring after a sleep.
- */
-static void awacs_sleep_notify(struct pmu_sleep_notifier *self, int when);
-struct pmu_sleep_notifier awacs_sleep_notifier = {
-	awacs_sleep_notify, SLEEP_LEVEL_SOUND,
-};
-#endif /* CONFIG_PM */
-
-/* for (soft) sample rate translations */
-int expand_bal;		/* Balance factor for expanding (not volume!) */
-int expand_read_bal;	/* Balance factor for expanding reads (not volume!) */
-
-/*** Low level stuff *********************************************************/
-
-static void *PMacAlloc(unsigned int size, gfp_t flags);
-static void PMacFree(void *ptr, unsigned int size);
-static int PMacIrqInit(void);
-#ifdef MODULE
-static void PMacIrqCleanup(void);
-#endif
-static void PMacSilence(void);
-static void PMacInit(void);
-static int PMacSetFormat(int format);
-static int PMacSetVolume(int volume);
-static void PMacPlay(void);
-static void PMacRecord(void);
-static irqreturn_t pmac_awacs_tx_intr(int irq, void *devid);
-static irqreturn_t pmac_awacs_rx_intr(int irq, void *devid);
-static irqreturn_t pmac_awacs_intr(int irq, void *devid);
-static void awacs_write(int val);
-static int awacs_get_volume(int reg, int lshift);
-static int awacs_volume_setter(int volume, int n, int mute, int lshift);
-
-
-/*** Mid level stuff **********************************************************/
-
-static int PMacMixerIoctl(u_int cmd, u_long arg);
-static int PMacWriteSqSetup(void);
-static int PMacReadSqSetup(void);
-static void PMacAbortRead(void);
-
-extern TRANS transAwacsNormal ;
-extern TRANS transAwacsExpand ;
-extern TRANS transAwacsNormalRead ;
-extern TRANS transAwacsExpandRead ;
-
-extern int daca_init(void);
-extern void daca_cleanup(void);
-extern int daca_set_volume(uint left_vol, uint right_vol);
-extern void daca_get_volume(uint * left_vol, uint  *right_vol);
-extern int daca_enter_sleep(void);
-extern int daca_leave_sleep(void);
-
-#define TRY_LOCK()	\
-	if ((rc = mutex_lock_interruptible(&dmasound_mutex)) != 0)	\
-		return rc;
-#define LOCK()		mutex_lock(&dmasound_mutex);
-
-#define UNLOCK()	mutex_unlock(&dmasound_mutex);
-
-/* We use different versions that the ones provided in dmasound.h
- * 
- * FIXME: Use different names ;)
- */
-#undef IOCTL_IN
-#undef IOCTL_OUT
-
-#define IOCTL_IN(arg, ret)	\
-	rc = get_user(ret, (int __user *)(arg)); \
-	if (rc) break;
-#define IOCTL_OUT(arg, ret)	\
-	ioctl_return2((int __user *)(arg), ret)
-
-static inline int ioctl_return2(int __user *addr, int value)
-{
-	return value < 0 ? value : put_user(value, addr);
-}
-
-
-/*** AE - TUMBLER / SNAPPER START ************************************************/
-
-
-int gpio_audio_reset, gpio_audio_reset_pol;
-int gpio_amp_mute, gpio_amp_mute_pol;
-int gpio_headphone_mute, gpio_headphone_mute_pol;
-int gpio_headphone_detect, gpio_headphone_detect_pol;
-int gpio_headphone_irq;
-
-int
-setup_audio_gpio(const char *name, const char* compatible, int *gpio_addr, int* gpio_pol)
-