Merge tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Lots of changes (slightly more code increase than usual) at this time,
  while most of code changes are ASoC driver-specific.

  Here are some highlights:

  Core:

   - The new auxiliary bus implementation for Intel DSP, which will be
     used by other drivers as well

   - Lots of ASoC core cleanups and refactoring

   - UBSAN and KCSAN fixes in rawmidi, sequencer and a few others

   - Compress-offload API enhancement for the pause during draining

  HD- and USB-audio:

   - Enhancements of the USB-audio implicit feedback support, including
     better full-duplex operations

   - Continued CA0132 improvements and fixes

   - A few new quirk entries, HDMI audio fixes

  ASoC:

   - Support for boot time selection of Intel DSP firmware, which should
     help distros/users testing new stuff more easily; the kconfig was
     moved to boot time option, too

   - Some basic DPCM support in audio graph card

   - Removal of old pre-DT Freescale drivers

   - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
     Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek
     RT715, Qualcomm SM8250 and simple GPIO based muxes"

* tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits)
  ALSA: pcm: oss: Fix potential out-of-bounds shift
  ALSA: usb-audio: Fix potential out-of-bounds shift
  ALSA: hda/ca0132 - Add ZxR surround DAC setup.
  ALSA: hda/ca0132 - Add 8051 PLL write helper functions.
  ALSA: hda/hdmi: packet buffer index must be set before reading value
  ASoC: SOF: imx: update kernel-doc description
  ASoC: mediatek: mt8183: delete some unreachable code
  ASoC: mediatek: mt8183: add PM ops to machine drivers
  ASoC: topology: Fix wrong size check
  ASoC: topology: Add missing size check
  ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err
  ASoC: SOF: modify the SOF_DBG flags
  ASoC: SOF: Intel: hda: remove duplicated status dump
  ASoC: rt1015p: delay 300ms after SDB pulling high for calibration
  ASoC: rt1015p: move SDB control from trigger to DAPM
  ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control()
  ALSA: usb-audio: Fix control 'access overflow' errors from chmap
  ALSA: hda/hdmi: always print pin NIDs as hexadecimal
  ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button
  ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions.
  ...

1 files changed, 29 insertions, 48 deletions

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 3f76ff71ea47..84db0b7b9d59 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -95,6 +95,22 @@ config SND_SOC_FSL_EASRC
 	  destination sample rate. It is a new design module compare with the
 	  old ASRC.
 
+config SND_SOC_FSL_XCVR
+	tristate "NXP Audio Transceiver (XCVR) module support"
+	select REGMAP_MMIO
+	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	help
+	  Say Y if you want to add Audio Transceiver (XCVR) support for NXP
+	  iMX CPUs. XCVR is a digital module that supports HDMI2.1 eARC,
+	  HDMI1.4 ARC and SPDIF.
+
+config SND_SOC_FSL_AUD2HTX
+	tristate "AUDIO TO HDMI TX module support"
+	depends on ARCH_MXC || COMPILE_TEST
+	help
+	  Say Y if you want to add AUDIO TO HDMI TX support for NXP.
+
 config SND_SOC_FSL_UTILS
 	tristate
 
@@ -213,57 +229,18 @@ endif # SND_POWERPC_SOC
 
 config SND_SOC_IMX_PCM_FIQ
 	tristate
-	default y if SND_SOC_IMX_SSI=y && (SND_SOC_FSL_SSI=m || SND_SOC_FSL_SPDIF=m) && (MXC_TZIC || MXC_AVIC)
+	default y if (SND_SOC_FSL_SSI=m || SND_SOC_FSL_SPDIF=m) && (MXC_TZIC || MXC_AVIC)
 	select FIQ
 
 if SND_IMX_SOC
 
-config SND_SOC_IMX_SSI
-	tristate
-	select SND_SOC_FSL_UTILS
-
 comment "SoC Audio support for Freescale i.MX boards:"
 
-config SND_MXC_SOC_WM1133_EV1
-	tristate "Audio on the i.MX31ADS with WM1133-EV1 fitted"
-	depends on MACH_MX31ADS_WM1133_EV1
-	select SND_SOC_WM8350
-	select SND_SOC_IMX_PCM_FIQ
-	select SND_SOC_IMX_AUDMUX
-	select SND_SOC_IMX_SSI
-	help
-	  Enable support for audio on the i.MX31ADS with the WM1133-EV1
-	  PMIC board with WM8835x fitted.
-
-config SND_SOC_MX27VIS_AIC32X4
-	tristate "SoC audio support for Visstrim M10 boards"
-	depends on MACH_IMX27_VISSTRIM_M10 && I2C
-	select SND_SOC_TLV320AIC32X4
-	select SND_SOC_IMX_PCM_DMA
-	select SND_SOC_IMX_AUDMUX
-	select SND_SOC_IMX_SSI
-	help
-	  Say Y if you want to add support for SoC audio on Visstrim SM10
-	  board with TLV320AIC32X4 codec.
-
-config SND_SOC_PHYCORE_AC97
-	tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
-	depends on MACH_PCM043 || MACH_PCA100
-	select SND_SOC_AC97_BUS
-	select SND_SOC_WM9712
-	select SND_SOC_IMX_PCM_FIQ
-	select SND_SOC_IMX_AUDMUX
-	select SND_SOC_IMX_SSI
-	help
-	  Say Y if you want to add support for SoC audio on Phytec phyCORE
-	  and phyCARD boards in AC97 mode
-
 config SND_SOC_EUKREA_TLV320
 	tristate "Eukrea TLV320"
 	depends on ARCH_MXC && !ARM64 && I2C
 	select SND_SOC_TLV320AIC23_I2C
 	select SND_SOC_IMX_AUDMUX
-	select SND_SOC_IMX_SSI
 	select SND_SOC_FSL_SSI
 	select SND_SOC_IMX_PCM_DMA
 	help
@@ -302,14 +279,6 @@ config SND_SOC_IMX_SPDIF
 	  Say Y if you want to add support for SoC audio on an i.MX board with
 	  a S/DPDIF.
 
-config SND_SOC_IMX_MC13783
-	tristate "SoC Audio support for I.MX boards with mc13783"
-	depends on MFD_MC13XXX && ARM
-	select SND_SOC_IMX_SSI
-	select SND_SOC_IMX_AUDMUX
-	select SND_SOC_MC13783
-	select SND_SOC_IMX_PCM_DMA
-
 config SND_SOC_FSL_ASOC_CARD
 	tristate "Generic ASoC Sound Card with ASRC support"
 	depends on OF && I2C
@@ -336,6 +305,18 @@ config SND_SOC_IMX_AUDMIX
 	  Say Y if you want to add support for SoC audio on an i.MX board with
 	  an Audio Mixer.
 
+config SND_SOC_IMX_HDMI
+	tristate "SoC Audio support for i.MX boards with HDMI port"
+	select SND_SOC_FSL_SAI
+	select SND_SOC_FSL_AUD2HTX
+	select SND_SOC_HDMI_CODEC
+	help
+	  ALSA SoC Audio support with HDMI feature for Freescale SoCs that have
+	  SAI/AUD2HTX and connect with internal HDMI IP or external module
+	  SII902X.
+	  Say Y if you want to add support for SoC audio on an i.MX board with
+	  IMX HDMI.
+
 endif # SND_IMX_SOC
 
 endmenu