diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /sound/drivers/opl3/opl3_synth.c |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'sound/drivers/opl3/opl3_synth.c')
-rw-r--r-- | sound/drivers/opl3/opl3_synth.c | 447 |
1 files changed, 447 insertions, 0 deletions
diff --git a/sound/drivers/opl3/opl3_synth.c b/sound/drivers/opl3/opl3_synth.c new file mode 100644 index 000000000000..04f9f955e5b7 --- /dev/null +++ b/sound/drivers/opl3/opl3_synth.c @@ -0,0 +1,447 @@ +/* + * Copyright (c) by Uros Bizjak <uros@kss-loka.si> + * + * Routines for OPL2/OPL3/OPL4 control + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <sound/opl3.h> +#include <sound/asound_fm.h> + +/* + * There is 18 possible 2 OP voices + * (9 in the left and 9 in the right). + * The first OP is the modulator and 2nd is the carrier. + * + * The first three voices in the both sides may be connected + * with another voice to a 4 OP voice. For example voice 0 + * can be connected with voice 3. The operators of voice 3 are + * used as operators 3 and 4 of the new 4 OP voice. + * In this case the 2 OP voice number 0 is the 'first half' and + * voice 3 is the second. + */ + + +/* + * Register offset table for OPL2/3 voices, + * OPL2 / one OPL3 register array side only + */ + +char snd_opl3_regmap[MAX_OPL2_VOICES][4] = +{ +/* OP1 OP2 OP3 OP4 */ +/* ------------------------ */ + { 0x00, 0x03, 0x08, 0x0b }, + { 0x01, 0x04, 0x09, 0x0c }, + { 0x02, 0x05, 0x0a, 0x0d }, + + { 0x08, 0x0b, 0x00, 0x00 }, + { 0x09, 0x0c, 0x00, 0x00 }, + { 0x0a, 0x0d, 0x00, 0x00 }, + + { 0x10, 0x13, 0x00, 0x00 }, /* used by percussive voices */ + { 0x11, 0x14, 0x00, 0x00 }, /* if the percussive mode */ + { 0x12, 0x15, 0x00, 0x00 } /* is selected (only left reg block) */ +}; + +/* + * prototypes + */ +static int snd_opl3_play_note(opl3_t * opl3, snd_dm_fm_note_t * note); +static int snd_opl3_set_voice(opl3_t * opl3, snd_dm_fm_voice_t * voice); +static int snd_opl3_set_params(opl3_t * opl3, snd_dm_fm_params_t * params); +static int snd_opl3_set_mode(opl3_t * opl3, int mode); +static int snd_opl3_set_connection(opl3_t * opl3, int connection); + +/* ------------------------------ */ + +/* + * open the device exclusively + */ +int snd_opl3_open(snd_hwdep_t * hw, struct file *file) +{ + opl3_t *opl3 = hw->private_data; + + down(&opl3->access_mutex); + if (opl3->used) { + up(&opl3->access_mutex); + return -EAGAIN; + } + opl3->used++; + up(&opl3->access_mutex); + + return 0; +} + +/* + * ioctl for hwdep device: + */ +int snd_opl3_ioctl(snd_hwdep_t * hw, struct file *file, + unsigned int cmd, unsigned long arg) +{ + opl3_t *opl3 = hw->private_data; + void __user *argp = (void __user *)arg; + + snd_assert(opl3 != NULL, return -EINVAL); + + switch (cmd) { + /* get information */ + case SNDRV_DM_FM_IOCTL_INFO: + { + snd_dm_fm_info_t info; + + info.fm_mode = opl3->fm_mode; + info.rhythm = opl3->rhythm; + if (copy_to_user(argp, &info, sizeof(snd_dm_fm_info_t))) + return -EFAULT; + return 0; + } + + case SNDRV_DM_FM_IOCTL_RESET: +#ifdef CONFIG_SND_OSSEMUL + case SNDRV_DM_FM_OSS_IOCTL_RESET: +#endif + snd_opl3_reset(opl3); + return 0; + + case SNDRV_DM_FM_IOCTL_PLAY_NOTE: +#ifdef CONFIG_SND_OSSEMUL + case SNDRV_DM_FM_OSS_IOCTL_PLAY_NOTE: +#endif + { + snd_dm_fm_note_t note; + if (copy_from_user(¬e, argp, sizeof(snd_dm_fm_note_t))) + return -EFAULT; + return snd_opl3_play_note(opl3, ¬e); + } + + case SNDRV_DM_FM_IOCTL_SET_VOICE: +#ifdef CONFIG_SND_OSSEMUL + case SNDRV_DM_FM_OSS_IOCTL_SET_VOICE: +#endif + { + snd_dm_fm_voice_t voice; + if (copy_from_user(&voice, argp, sizeof(snd_dm_fm_voice_t))) + return -EFAULT; + return snd_opl3_set_voice(opl3, &voice); + } + + case SNDRV_DM_FM_IOCTL_SET_PARAMS: +#ifdef CONFIG_SND_OSSEMUL + case SNDRV_DM_FM_OSS_IOCTL_SET_PARAMS: +#endif + { + snd_dm_fm_params_t params; + if (copy_from_user(¶ms, argp, sizeof(snd_dm_fm_params_t))) + return -EFAULT; + return snd_opl3_set_params(opl3, ¶ms); + } + + case SNDRV_DM_FM_IOCTL_SET_MODE: +#ifdef CONFIG_SND_OSSEMUL + case SNDRV_DM_FM_OSS_IOCTL_SET_MODE: +#endif + return snd_opl3_set_mode(opl3, (int) arg); + + case SNDRV_DM_FM_IOCTL_SET_CONNECTION: +#ifdef CONFIG_SND_OSSEMUL + case SNDRV_DM_FM_OSS_IOCTL_SET_OPL: +#endif + return snd_opl3_set_connection(opl3, (int) arg); + +#ifdef CONFIG_SND_DEBUG + default: + snd_printk("unknown IOCTL: 0x%x\n", cmd); +#endif + } + return -ENOTTY; +} + +/* + * close the device + */ +int snd_opl3_release(snd_hwdep_t * hw, struct file *file) +{ + opl3_t *opl3 = hw->private_data; + + snd_opl3_reset(opl3); + down(&opl3->access_mutex); + opl3->used--; + up(&opl3->access_mutex); + + return 0; +} + +/* ------------------------------ */ + +void snd_opl3_reset(opl3_t * opl3) +{ + unsigned short opl3_reg; + + unsigned short reg_side; + unsigned char voice_offset; + + int max_voices, i; + + max_voices = (opl3->hardware < OPL3_HW_OPL3) ? + MAX_OPL2_VOICES : MAX_OPL3_VOICES; + + for (i = 0; i < max_voices; i++) { + /* Get register array side and offset of voice */ + if (i < MAX_OPL2_VOICES) { + /* Left register block for voices 0 .. 8 */ + reg_side = OPL3_LEFT; + voice_offset = i; + } else { + /* Right register block for voices 9 .. 17 */ + reg_side = OPL3_RIGHT; + voice_offset = i - MAX_OPL2_VOICES; + } + opl3_reg = reg_side | (OPL3_REG_KSL_LEVEL + snd_opl3_regmap[voice_offset][0]); + opl3->command(opl3, opl3_reg, OPL3_TOTAL_LEVEL_MASK); /* Operator 1 volume */ + opl3_reg = reg_side | (OPL3_REG_KSL_LEVEL + snd_opl3_regmap[voice_offset][1]); + opl3->command(opl3, opl3_reg, OPL3_TOTAL_LEVEL_MASK); /* Operator 2 volume */ + + opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset); + opl3->command(opl3, opl3_reg, 0x00); /* Note off */ + } + + opl3->max_voices = MAX_OPL2_VOICES; + opl3->fm_mode = SNDRV_DM_FM_MODE_OPL2; + + opl3->command(opl3, OPL3_LEFT | OPL3_REG_TEST, OPL3_ENABLE_WAVE_SELECT); + opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, 0x00); /* Melodic mode */ + opl3->rhythm = 0; +} + + +static int snd_opl3_play_note(opl3_t * opl3, snd_dm_fm_note_t * note) +{ + unsigned short reg_side; + unsigned char voice_offset; + + unsigned short opl3_reg; + unsigned char reg_val; + + /* Voices 0 - 8 in OPL2 mode */ + /* Voices 0 - 17 in OPL3 mode */ + if (note->voice >= ((opl3->fm_mode == SNDRV_DM_FM_MODE_OPL3) ? + MAX_OPL3_VOICES : MAX_OPL2_VOICES)) + return -EINVAL; + + /* Get register array side and offset of voice */ + if (note->voice < MAX_OPL2_VOICES) { + /* Left register block for voices 0 .. 8 */ + reg_side = OPL3_LEFT; + voice_offset = note->voice; + } else { + /* Right register block for voices 9 .. 17 */ + reg_side = OPL3_RIGHT; + voice_offset = note->voice - MAX_OPL2_VOICES; + } + + /* Set lower 8 bits of note frequency */ + reg_val = (unsigned char) note->fnum; + opl3_reg = reg_side | (OPL3_REG_FNUM_LOW + voice_offset); + opl3->command(opl3, opl3_reg, reg_val); + + reg_val = 0x00; + /* Set output sound flag */ + if (note->key_on) + reg_val |= OPL3_KEYON_BIT; + /* Set octave */ + reg_val |= (note->octave << 2) & OPL3_BLOCKNUM_MASK; + /* Set higher 2 bits of note frequency */ + reg_val |= (unsigned char) (note->fnum >> 8) & OPL3_FNUM_HIGH_MASK; + + /* Set OPL3 KEYON_BLOCK register of requested voice */ + opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset); + opl3->command(opl3, opl3_reg, reg_val); + + return 0; +} + + +static int snd_opl3_set_voice(opl3_t * opl3, snd_dm_fm_voice_t * voice) +{ + unsigned short reg_side; + unsigned char op_offset; + unsigned char voice_offset; + + unsigned short opl3_reg; + unsigned char reg_val; + + /* Only operators 1 and 2 */ + if (voice->op > 1) + return -EINVAL; + /* Voices 0 - 8 in OPL2 mode */ + /* Voices 0 - 17 in OPL3 mode */ + if (voice->voice >= ((opl3->fm_mode == SNDRV_DM_FM_MODE_OPL3) ? + MAX_OPL3_VOICES : MAX_OPL2_VOICES)) + return -EINVAL; + + /* Get register array side and offset of voice */ + if (voice->voice < MAX_OPL2_VOICES) { + /* Left register block for voices 0 .. 8 */ + reg_side = OPL3_LEFT; + voice_offset = voice->voice; + } else { + /* Right register block for voices 9 .. 17 */ + reg_side = OPL3_RIGHT; + voice_offset = voice->voice - MAX_OPL2_VOICES; + } + /* Get register offset of operator */ + op_offset = snd_opl3_regmap[voice_offset][voice->op]; + + reg_val = 0x00; + /* Set amplitude modulation (tremolo) effect */ + if (voice->am) + reg_val |= OPL3_TREMOLO_ON; + /* Set vibrato effect */ + if (voice->vibrato) + reg_val |= OPL3_VIBRATO_ON; + /* Set sustaining sound phase */ + if (voice->do_sustain) + reg_val |= OPL3_SUSTAIN_ON; + /* Set keyboard scaling bit */ + if (voice->kbd_scale) + reg_val |= OPL3_KSR; + /* Set harmonic or frequency multiplier */ + reg_val |= voice->harmonic & OPL3_MULTIPLE_MASK; + + /* Set OPL3 AM_VIB register of requested voice/operator */ + opl3_reg = reg_side | (OPL3_REG_AM_VIB + op_offset); + opl3->command(opl3, opl3_reg, reg_val); + + /* Set decreasing volume of higher notes */ + reg_val = (voice->scale_level << 6) & OPL3_KSL_MASK; + /* Set output volume */ + reg_val |= ~voice->volume & OPL3_TOTAL_LEVEL_MASK; + + /* Set OPL3 KSL_LEVEL register of requested voice/operator */ + opl3_reg = reg_side | (OPL3_REG_KSL_LEVEL + op_offset); + opl3->command(opl3, opl3_reg, reg_val); + + /* Set attack phase level */ + reg_val = (voice->attack << 4) & OPL3_ATTACK_MASK; + /* Set decay phase level */ + reg_val |= voice->decay & OPL3_DECAY_MASK; + + /* Set OPL3 ATTACK_DECAY register of requested voice/operator */ + opl3_reg = reg_side | (OPL3_REG_ATTACK_DECAY + op_offset); + opl3->command(opl3, opl3_reg, reg_val); + + /* Set sustain phase level */ + reg_val = (voice->sustain << 4) & OPL3_SUSTAIN_MASK; + /* Set release phase level */ + reg_val |= voice->release & OPL3_RELEASE_MASK; + + /* Set OPL3 SUSTAIN_RELEASE register of requested voice/operator */ + opl3_reg = reg_side | (OPL3_REG_SUSTAIN_RELEASE + op_offset); + opl3->command(opl3, opl3_reg, reg_val); + + /* Set inter-operator feedback */ + reg_val = (voice->feedback << 1) & OPL3_FEEDBACK_MASK; + /* Set inter-operator connection */ + if (voice->connection) + reg_val |= OPL3_CONNECTION_BIT; + /* OPL-3 only */ + if (opl3->fm_mode == SNDRV_DM_FM_MODE_OPL3) { + if (voice->left) + reg_val |= OPL3_VOICE_TO_LEFT; + if (voice->right) + reg_val |= OPL3_VOICE_TO_RIGHT; + } + /* Feedback/connection bits are applicable to voice */ + opl3_reg = reg_side | (OPL3_REG_FEEDBACK_CONNECTION + voice_offset); + opl3->command(opl3, opl3_reg, reg_val); + + /* Select waveform */ + reg_val = voice->waveform & OPL3_WAVE_SELECT_MASK; + opl3_reg = reg_side | (OPL3_REG_WAVE_SELECT + op_offset); + opl3->command(opl3, opl3_reg, reg_val); + + return 0; +} + +static int snd_opl3_set_params(opl3_t * opl3, snd_dm_fm_params_t * params) +{ + unsigned char reg_val; + + reg_val = 0x00; + /* Set keyboard split method */ + if (params->kbd_split) + reg_val |= OPL3_KEYBOARD_SPLIT; + opl3->command(opl3, OPL3_LEFT | OPL3_REG_KBD_SPLIT, reg_val); + + reg_val = 0x00; + /* Set amplitude modulation (tremolo) depth */ + if (params->am_depth) + reg_val |= OPL3_TREMOLO_DEPTH; + /* Set vibrato depth */ + if (params->vib_depth) + reg_val |= OPL3_VIBRATO_DEPTH; + /* Set percussion mode */ + if (params->rhythm) { + reg_val |= OPL3_PERCUSSION_ENABLE; + opl3->rhythm = 1; + } else { + opl3->rhythm = 0; + } + /* Play percussion instruments */ + if (params->bass) + reg_val |= OPL3_BASSDRUM_ON; + if (params->snare) + reg_val |= OPL3_SNAREDRUM_ON; + if (params->tomtom) + reg_val |= OPL3_TOMTOM_ON; + if (params->cymbal) + reg_val |= OPL3_CYMBAL_ON; + if (params->hihat) + reg_val |= OPL3_HIHAT_ON; + + opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, reg_val); + return 0; +} + +static int snd_opl3_set_mode(opl3_t * opl3, int mode) +{ + if ((mode == SNDRV_DM_FM_MODE_OPL3) && (opl3->hardware < OPL3_HW_OPL3)) + return -EINVAL; + + opl3->fm_mode = mode; + if (opl3->hardware >= OPL3_HW_OPL3) + opl3->command(opl3, OPL3_RIGHT | OPL3_REG_CONNECTION_SELECT, 0x00); /* Clear 4-op connections */ + + return 0; +} + +static int snd_opl3_set_connection(opl3_t * opl3, int connection) +{ + unsigned char reg_val; + + /* OPL-3 only */ + if (opl3->fm_mode != SNDRV_DM_FM_MODE_OPL3) + return -EINVAL; + + reg_val = connection & (OPL3_RIGHT_4OP_0 | OPL3_RIGHT_4OP_1 | OPL3_RIGHT_4OP_2 | + OPL3_LEFT_4OP_0 | OPL3_LEFT_4OP_1 | OPL3_LEFT_4OP_2); + /* Set 4-op connections */ + opl3->command(opl3, OPL3_RIGHT | OPL3_REG_CONNECTION_SELECT, reg_val); + + return 0; +} |