Merge branch 'devlink-port'

Vasundhara Volam says:

====================
devlink: Add configuration parameters support for devlink_port

This patchset adds support for configuration parameters setting through
devlink_port.  Each device registers supported configuration parameters
table.

The user can retrieve data on these parameters by
"devlink port param show" command and can set new value to a
parameter by "devlink port param set" command.
All configuration modes supported by devlink_dev are supported
by devlink_port also.

Command examples and output:

pci/0000:3b:00.0/0:
  name wake-on-lan type generic
    values:
      cmode permanent value false

pci/0000:3b:00.1/1:
  name wake-on-lan type generic
    values:
      cmode permanent value false

pci/0000:af:00.0/0:
  name wake-on-lan type generic
    values:
      cmode permanent value true

pci/0000:3b:00.0/0:
  name wake-on-lan type generic
    values:
      cmode permanent value false

There is difference of opinion on adding WOL parameter to devlink, between
Jakub Kicinski and Michael Chan.

Quote from Jakud Kicinski:
********
As explained previously I think it's a very bad idea to add existing
configuration options to devlink, just because devlink has the ability
to persist the setting in NVM.  Especially that for WoL you have to get
the link up so you potentially have all link config stuff as well.  And
that n-tuple filters are one of the WoL options, meaning we'd need the
ability to persist n-tuple filters via devlink.

The effort would be far better spent helping with migrating ethtool to
netlink, and allowing persisting there.

I have not heard any reason why devlink is a better fit.  I can imagine
you're just doing it here because it's less effort for you since
ethtool is not yet migrated.
********

Quote from Michael Chan:
********
The devlink's WoL parameter is a persistent WoL parameter stored in the
NIC's NVRAM. It is different from ethtool's WoL parameter in a number of
ways. ethtool WoL is not persistent over AC power cycle and is considered
OS-present WoL. As such, ethtool WoL can use a more sophisticated pattern
including n-tuple with IP address in addition to the more basic types
(e.g. magic packet). Whereas OS-absent power up WoL should only include
magic packet and other simple types. The devlink WoL setting does not have
to match the ethtool WoL setting. The card will autoneg up to the speed
supported by Vaux so no special devlink link setting is needed.
********

Future expansion of WOL parameter to devlink:
********
Add an additional flag to support additional setting to address link settings.
This will allow attributes to support both runtime and persistent
configuration.
********

v7->v8:
* Re-ordered function definitions.
* Append with "Acked-by: Jiri Pirko <jiri@mellanox.com>" to first 3 patches.
* Add missing devlink_port_param_driverinit_value_get() declaration.

v6->v7:
* Remove RFC tag from the patch-set.

v5->v6:
* Replace '-' with '*' in cover letter to avoid cutoff by git.

v4->v5:
* Added quotes from Jakub Kicinski and Michael chan on devlink's WOL
  parameter in the cover letter.

v3->v4:
* Update changes done from v2 to v3 version in individual patch
  descriptions.

v2->v3:
Make following changes as per suggestions from Jiri Pirko and
Michal Kubecek.
* Add a helper __devlink_params_register() with common code used by
  both devlink_params_register() and devlink_port_params_register().
* Define only WOL types used now and define them as bitfield, so that
  mutliple WOL types can be enabled upon power on.
* Modify "wake-on-lan" name to "wake_on_lan" to be symmetric with
  previous definitions.
* Rename DEVLINK_PARAM_WOL_XXX to DEVLINK_PARAM_WAKE_XXX to be
  symmetrical with ethtool WOL definitions.
* Modify bnxt_dl_wol_validate(), to throw error message when user gives
  value other than DEVLINK_PARAM_WAKE_MAGIC or to disable WOL.
* Use netdev_err() instead of netdev_warn(), when devlink_port_register()
  and devlink_port_params_register() returns error. Also, don't log rc
  in this message.

v1->v2:
Make following changes as per suggestions from Jiri Pirko.
* Remove separate enum devlink_port_param_generic_id for port params.
  Instead club it with existing device params. Accordingly refactor
  remaining patchset.
* Move INIT_LIST_HEAD of port param_list to devlink_port_register()
* Add a helper devlink_param_verify() to be used for both
  devlink_params_register() and devlink_port_params_register().
* Add a helper __devlink_params_unregister() for common code in
  devlink_params_unregister() and devlink_port_params_unregister().
* Move DEVLINK_CMD_PORT_PARAM_XXX definitions to the end of the enum.
* Split the patches for devlink_port_param_driverinit_value_get() and
  devlink_port_param_driverinit_value_set() into separate patches.
* define DEVLINK_PARAM_GENERIC_ID_WOL type as u8 and define enum for
  different types of WOL. Accordingly modify bnxt_en patch to validate
  wol type.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 384 insertions, 83 deletions

diff --git a/net/core/devlink.c b/net/core/devlink.c
index abb0da9d7b4b..e6f170caf449 100644
--- a/net/core/devlink.c
+++ b/net/core/devlink.c
@@ -2697,6 +2697,11 @@ static const struct devlink_param devlink_param_generic[] = {
 		.name = DEVLINK_PARAM_GENERIC_FW_LOAD_POLICY_NAME,
 		.type = DEVLINK_PARAM_GENERIC_FW_LOAD_POLICY_TYPE,
 	},
+	{
+		.id = DEVLINK_PARAM_GENERIC_ID_WOL,
+		.name = DEVLINK_PARAM_GENERIC_WOL_NAME,
+		.type = DEVLINK_PARAM_GENERIC_WOL_TYPE,
+	},
 };
 
 static int devlink_param_generic_verify(const struct devlink_param *param)
@@ -2843,6 +2848,7 @@ nla_put_failure:
 }
 
 static int devlink_nl_param_fill(struct sk_buff *msg, struct devlink *devlink,
+				 unsigned int port_index,
 				 struct devlink_param_item *param_item,
 				 enum devlink_command cmd,
 				 u32 portid, u32 seq, int flags)
@@ -2880,6 +2886,13 @@ static int devlink_nl_param_fill(struct sk_buff *msg, struct devlink *devlink,
 
 	if (devlink_nl_put_handle(msg, devlink))
 		goto genlmsg_cancel;
+
+	if (cmd == DEVLINK_CMD_PORT_PARAM_GET ||
+	    cmd == DEVLINK_CMD_PORT_PARAM_NEW ||
+	    cmd == DEVLINK_CMD_PORT_PARAM_DEL)
+		if (nla_put_u32(msg, DEVLINK_ATTR_PORT_INDEX, port_index))
+			goto genlmsg_cancel;
+
 	param_attr = nla_nest_start(msg, DEVLINK_ATTR_PARAM);
 	if (!param_attr)
 		goto genlmsg_cancel;
@@ -2922,18 +2935,22 @@ genlmsg_cancel:
 }
 
 static void devlink_param_notify(struct devlink *devlink,
+				 unsigned int port_index,
 				 struct devlink_param_item *param_item,
 				 enum devlink_command cmd)
 {
 	struct sk_buff *msg;
 	int err;
 
-	WARN_ON(cmd != DEVLINK_CMD_PARAM_NEW && cmd != DEVLINK_CMD_PARAM_DEL);
+	WARN_ON(cmd != DEVLINK_CMD_PARAM_NEW && cmd != DEVLINK_CMD_PARAM_DEL &&
+		cmd != DEVLINK_CMD_PORT_PARAM_NEW &&
+		cmd != DEVLINK_CMD_PORT_PARAM_DEL);
 
 	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		return;
-	err = devlink_nl_param_fill(msg, devlink, param_item, cmd, 0, 0, 0);
+	err = devlink_nl_param_fill(msg, devlink, port_index, param_item, cmd,
+				    0, 0, 0);
 	if (err) {
 		nlmsg_free(msg);
 		return;
@@ -2962,7 +2979,7 @@ static int devlink_nl_cmd_param_get_dumpit(struct sk_buff *msg,
 				idx++;
 				continue;
 			}
-			err = devlink_nl_param_fill(msg, devlink, param_item,
+			err = devlink_nl_param_fill(msg, devlink, 0, param_item,
 						    DEVLINK_CMD_PARAM_GET,
 						    NETLINK_CB(cb->skb).portid,
 						    cb->nlh->nlmsg_seq,
@@ -3051,7 +3068,7 @@ devlink_param_value_get_from_info(const struct devlink_param *param,
 }
 
 static struct devlink_param_item *
-devlink_param_get_from_info(struct devlink *devlink,
+devlink_param_get_from_info(struct list_head *param_list,
 			    struct genl_info *info)
 {
 	char *param_name;
@@ -3060,7 +3077,7 @@ devlink_param_get_from_info(struct devlink *devlink,
 		return NULL;
 
 	param_name = nla_data(info->attrs[DEVLINK_ATTR_PARAM_NAME]);
-	return devlink_param_find_by_name(&devlink->param_list, param_name);
+	return devlink_param_find_by_name(param_list, param_name);
 }
 
 static int devlink_nl_cmd_param_get_doit(struct sk_buff *skb,
@@ -3071,7 +3088,7 @@ static int devlink_nl_cmd_param_get_doit(struct sk_buff *skb,
 	struct sk_buff *msg;
 	int err;
 
-	param_item = devlink_param_get_from_info(devlink, info);
+	param_item = devlink_param_get_from_info(&devlink->param_list, info);
 	if (!param_item)
 		return -EINVAL;
 
@@ -3079,7 +3096,7 @@ static int devlink_nl_cmd_param_get_doit(struct sk_buff *skb,
 	if (!msg)
 		return -ENOMEM;
 
-	err = devlink_nl_param_fill(msg, devlink, param_item,
+	err = devlink_nl_param_fill(msg, devlink, 0, param_item,
 				    DEVLINK_CMD_PARAM_GET,
 				    info->snd_portid, info->snd_seq, 0);
 	if (err) {
@@ -3090,10 +3107,12 @@ static int devlink_nl_cmd_param_get_doit(struct sk_buff *skb,
 	return genlmsg_reply(msg, info);
 }
 
-static int devlink_nl_cmd_param_set_doit(struct sk_buff *skb,
-					 struct genl_info *info)
+static int __devlink_nl_cmd_param_set_doit(struct devlink *devlink,
+					   unsigned int port_index,
+					   struct list_head *param_list,
+					   struct genl_info *info,
+					   enum devlink_command cmd)
 {
-	struct devlink *devlink = info->user_ptr[0];
 	enum devlink_param_type param_type;
 	struct devlink_param_gset_ctx ctx;
 	enum devlink_param_cmode cmode;
@@ -3102,7 +3121,7 @@ static int devlink_nl_cmd_param_set_doit(struct sk_buff *skb,
 	union devlink_param_value value;
 	int err = 0;
 
-	param_item = devlink_param_get_from_info(devlink, info);
+	param_item = devlink_param_get_from_info(param_list, info);
 	if (!param_item)
 		return -EINVAL;
 	param = param_item->param;
@@ -3142,17 +3161,28 @@ static int devlink_nl_cmd_param_set_doit(struct sk_buff *skb,
 			return err;
 	}
 
-	devlink_param_notify(devlink, param_item, DEVLINK_CMD_PARAM_NEW);
+	devlink_param_notify(devlink, port_index, param_item, cmd);
 	return 0;
 }
 
+static int devlink_nl_cmd_param_set_doit(struct sk_buff *skb,
+					 struct genl_info *info)
+{
+	struct devlink *devlink = info->user_ptr[0];
+
+	return __devlink_nl_cmd_param_set_doit(devlink, 0, &devlink->param_list,
+					       info, DEVLINK_CMD_PARAM_NEW);
+}
+
 static int devlink_param_register_one(struct devlink *devlink,
-				      const struct devlink_param *param)
+				      unsigned int port_index,
+				      struct list_head *param_list,
+				      const struct devlink_param *param,
+				      enum devlink_command cmd)
 {
 	struct devlink_param_item *param_item;
 
-	if (devlink_param_find_by_name(&devlink->param_list,
-				       param->name))
+	if (devlink_param_find_by_name(param_list, param->name))
 		return -EEXIST;
 
 	if (param->supported_cmodes == BIT(DEVLINK_PARAM_CMODE_DRIVERINIT))
@@ -3165,24 +3195,111 @@ static int devlink_param_register_one(struct devlink *devlink,
 		return -ENOMEM;
 	param_item->param = param;
 
-	list_add_tail(&param_item->list, &devlink->param_list);
-	devlink_param_notify(devlink, param_item, DEVLINK_CMD_PARAM_NEW);
+	list_add_tail(&param_item->list, param_list);
+	devlink_param_notify(devlink, port_index, param_item, cmd);
 	return 0;
 }
 
 static void devlink_param_unregister_one(struct devlink *devlink,
-					 const struct devlink_param *param)
+					 unsigned int port_index,
+					 struct list_head *param_list,
+					 const struct devlink_param *param,
+					 enum devlink_command cmd)
 {
 	struct devlink_param_item *param_item;
 
-	param_item = devlink_param_find_by_name(&devlink->param_list,
-						param->name);
+	param_item = devlink_param_find_by_name(param_list, param->name);
 	WARN_ON(!param_item);
-	devlink_param_notify(devlink, param_item, DEVLINK_CMD_PARAM_DEL);
+	devlink_param_notify(devlink, port_index, param_item, cmd);
 	list_del(&param_item->list);
 	kfree(param_item);
 }
 
+static int devlink_nl_cmd_port_param_get_dumpit(struct sk_buff *msg,
+						struct netlink_callback *cb)
+{
+	struct devlink_param_item *param_item;
+	struct devlink_port *devlink_port;
+	struct devlink *devlink;
+	int start = cb->args[0];
+	int idx = 0;
+	int err;
+
+	mutex_lock(&devlink_mutex);
+	list_for_each_entry(devlink, &devlink_list, list) {
+		if (!net_eq(devlink_net(devlink), sock_net(msg->sk)))
+			continue;
+		mutex_lock(&devlink->lock);
+		list_for_each_entry(devlink_port, &devlink->port_list, list) {
+			list_for_each_entry(param_item,
+					    &devlink_port->param_list, list) {
+				if (idx < start) {
+					idx++;
+					continue;
+				}
+				err = devlink_nl_param_fill(msg,
+						devlink_port->devlink,
+						devlink_port->index, param_item,
+						DEVLINK_CMD_PORT_PARAM_GET,
+						NETLINK_CB(cb->skb).portid,
+						cb->nlh->nlmsg_seq,
+						NLM_F_MULTI);
+				if (err) {
+					mutex_unlock(&devlink->lock);
+					goto out;
+				}
+				idx++;
+			}
+		}
+		mutex_unlock(&devlink->lock);
+	}
+out:
+	mutex_unlock(&devlink_mutex);
+
+	cb->args[0] = idx;
+	return msg->len;
+}
+
+static int devlink_nl_cmd_port_param_get_doit(struct sk_buff *skb,
+					      struct genl_info *info)
+{
+	struct devlink_port *devlink_port = info->user_ptr[0];
+	struct devlink_param_item *param_item;
+	struct sk_buff *msg;
+	int err;
+
+	param_item = devlink_param_get_from_info(&devlink_port->param_list,
+						 info);
+	if (!param_item)
+		return -EINVAL;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	err = devlink_nl_param_fill(msg, devlink_port->devlink,
+				    devlink_port->index, param_item,
+				    DEVLINK_CMD_PORT_PARAM_GET,
+				    info->snd_portid, info->snd_seq, 0);
+	if (err) {
+		nlmsg_free(msg);
+		return err;
+	}
+
+	return genlmsg_reply(msg, info);
+}
+
+static int devlink_nl_cmd_port_param_set_doit(struct sk_buff *skb,
+					      struct genl_info *info)
+{
+	struct devlink_port *devlink_port = info->user_ptr[0];
+
+	return __devlink_nl_cmd_param_set_doit(devlink_port->devlink,
+					       devlink_port->index,
+					       &devlink_port->param_list, info,
+					       DEVLINK_CMD_PORT_PARAM_NEW);
+}
+
 static int devlink_nl_region_snapshot_id_put(struct sk_buff *msg,
 					     struct devlink *devlink,
 					     struct devlink_snapshot *snapshot)
@@ -3821,6 +3938,21 @@ static const struct genl_ops devlink_nl_ops[] = {
 		.internal_flags = DEVLINK_NL_FLAG_NEED_DEVLINK,
 	},
 	{
+		.cmd = DEVLINK_CMD_PORT_PARAM_GET,
+		.doit = devlink_nl_cmd_port_param_get_doit,
+		.dumpit = devlink_nl_cmd_port_param_get_dumpit,
+		.policy = devlink_nl_policy,
+		.internal_flags = DEVLINK_NL_FLAG_NEED_PORT,
+		/* can be retrieved by unprivileged users */
+	},
+	{
+		.cmd = DEVLINK_CMD_PORT_PARAM_SET,
+		.doit = devlink_nl_cmd_port_param_set_doit,
+		.policy = devlink_nl_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = DEVLINK_NL_FLAG_NEED_PORT,
+	},
+	{
 		.cmd = DEVLINK_CMD_REGION_GET,
 		.doit = devlink_nl_cmd_region_get_doit,
 		.dumpit = devlink_nl_cmd_region_get_dumpit,
@@ -3954,6 +4086,7 @@ int devlink_port_register(struct devlink *devlink,
 	devlink_port->index = port_index;
 	devlink_port->registered = true;
 	list_add_tail(&devlink_port->list, &devlink->port_list);
+	INIT_LIST_HEAD(&devlink_port->param_list);
 	mutex_unlock(&devlink->lock);
 	devlink_port_notify(devlink_port, DEVLINK_CMD_PORT_NEW);
 	return 0;
@@ -4471,18 +4604,23 @@ out:
 }
 EXPORT_SYMBOL_GPL(devlink_resource_occ_get_unregister);
 
-/**
- *	devlink_params_register - register configuration parameters
- *
- *	@devlink: devlink
- *	@params: configuration parameters array
- *	@params_count: number of parameters provided
- *
- *	Register the configuration parameters supported by the driver.
- */
-int devlink_params_register(struct devlink *devlink,
-			    const struct devlink_param *params,
-			    size_t params_count)
+static int devlink_param_verify(const struct devlink_param *param)
+{
+	if (!param || !param->name || !param->supported_cmodes)
+		return -EINVAL;
+	if (param->generic)
+		return devlink_param_generic_verify(param);
+	else
+		return devlink_param_driver_verify(param);
+}
+
+static int __devlink_params_register(struct devlink *devlink,
+				     unsigned int port_index,
+				     struct list_head *param_list,
+				     const struct devlink_param *params,
+				     size_t params_count,
+				     enum devlink_command reg_cmd,
+				     enum devlink_command unreg_cmd)
 {
 	const struct devlink_param *param = params;
 	int i;
@@ -4490,20 +4628,12 @@ int devlink_params_register(struct devlink *devlink,
 
 	mutex_lock(&devlink->lock);
 	for (i = 0; i < params_count; i++, param++) {
-		if (!param || !param->name || !param->supported_cmodes) {
-			err = -EINVAL;
+		err = devlink_param_verify(param);
+		if (err)
 			goto rollback;
-		}
-		if (param->generic) {
-			err = devlink_param_generic_verify(param);
-			if (err)
-				goto rollback;
-		} else {
-			err = devlink_param_driver_verify(param);
-			if (err)
-				goto rollback;
-		}
-		err = devlink_param_register_one(devlink, param);
+
+		err = devlink_param_register_one(devlink, port_index,
+						 param_list, param, reg_cmd);
 		if (err)
 			goto rollback;
 	}
@@ -4515,11 +4645,48 @@ rollback:
 	if (!i)
 		goto unlock;
 	for (param--; i > 0; i--, param--)
-		devlink_param_unregister_one(devlink, param);
+		devlink_param_unregister_one(devlink, port_index, param_list,
+					     param, unreg_cmd);
 unlock:
 	mutex_unlock(&devlink->lock);
 	return err;
 }
+
+static void __devlink_params_unregister(struct devlink *devlink,
+					unsigned int port_index,
+					struct list_head *param_list,
+					const struct devlink_param *params,
+					size_t params_count,
+					enum devlink_command cmd)
+{
+	const struct devlink_param *param = params;
+	int i;
+
+	mutex_lock(&devlink->lock);
+	for (i = 0; i < params_count; i++, param++)
+		devlink_param_unregister_one(devlink, 0, param_list, param,
+					     cmd);
+	mutex_unlock(&devlink->lock);
+}
+
+/**
+ *	devlink_params_register - register configuration parameters
+ *
+ *	@devlink: devlink
+ *	@params: configuration parameters array
+ *	@params_count: number of parameters provided
+ *
+ *	Register the configuration parameters supported by the driver.
+ */
+int devlink_params_register(struct devlink *devlink,
+			    const struct devlink_param *params,
+			    size_t params_count)
+{
+	return __devlink_params_register(devlink, 0, &devlink->param_list,
+					 params, params_count,
+					 DEVLINK_CMD_PARAM_NEW,
+					 DEVLINK_CMD_PARAM_DEL);
+}
 EXPORT_SYMBOL_GPL(devlink_params_register);
 
 /**
@@ -4532,36 +4699,61 @@ void devlink_params_unregister(struct devlink *devlink,
 			       const struct devlink_param *params,
 			       size_t params_count)
 {
-	const struct devlink_param *param = params;
-	int i;
-
-	mutex_lock(&devlink->lock);
-	for (i = 0; i < params_count; i++, param++)
-		devlink_param_unregister_one(devlink, param);
-	mutex_unlock(&devlink->lock);
+	return __devlink_params_unregister(devlink, 0, &devlink->param_list,
+					   params, params_count,
+					   DEVLINK_CMD_PARAM_DEL);
 }
 EXPORT_SYMBOL_GPL(devlink_params_unregister);
 
 /**
- *	devlink_param_driverinit_value_get - get configuration parameter
- *					     value for driver initializing
+ *	devlink_port_params_register - register port configuration parameters
  *
- *	@devlink: devlink
- *	@param_id: parameter ID
- *	@init_val: value of parameter in driverinit configuration mode
+ *	@devlink_port: devlink port
+ *	@params: configuration parameters array
+ *	@params_count: number of parameters provided
  *
- *	This function should be used by the driver to get driverinit
- *	configuration for initialization after reload command.
+ *	Register the configuration parameters supported by the port.
  */
-int devlink_param_driverinit_value_get(struct devlink *devlink, u32 param_id,
-				       union devlink_param_value *init_val)
+int devlink_port_params_register(struct devlink_port *devlink_port,
+				 const struct devlink_param *params,
+				 size_t params_count)
 {
-	struct devlink_param_item *param_item;
+	return __devlink_params_register(devlink_port->devlink,
+					 devlink_port->index,
+					 &devlink_port->param_list, params,
+					 params_count,
+					 DEVLINK_CMD_PORT_PARAM_NEW,
+					 DEVLINK_CMD_PORT_PARAM_DEL);
+}
+EXPORT_SYMBOL_GPL(devlink_port_params_register);
 
-	if (!devlink->ops || !devlink->ops->reload)
-		return -EOPNOTSUPP;
+/**
+ *	devlink_port_params_unregister - unregister port configuration
+ *	parameters
+ *
+ *	@devlink_port: devlink port
+ *	@params: configuration parameters array
+ *	@params_count: number of parameters provided
+ */
+void devlink_port_params_unregister(struct devlink_port *devlink_port,
+				    const struct devlink_param *params,
+				    size_t params_count)
+{
+	return __devlink_params_unregister(devlink_port->devlink,
+					   devlink_port->index,
+					   &devlink_port->param_list,
+					   params, params_count,
+					   DEVLINK_CMD_PORT_PARAM_DEL);
+}
+EXPORT_SYMBOL_GPL(devlink_port_params_unregister);
 
-	param_item = devlink_param_find_by_id(&devlink->param_list, param_id);
+static int
+__devlink_param_driverinit_value_get(struct list_head *param_list, u32 param_id,
+				     union devlink_param_value *init_val)
+{
+	struct devlink_param_item *param_item;
+
+	param_item = devlink_param_find_by_id(param_list, param_id);
 	if (!param_item)
 		return -EINVAL;
 
@@ -4577,6 +4769,54 @@ int devlink_param_driverinit_value_get(struct devlink *devlink, u32 param_id,
 
 	return 0;
 }
+
+static int
+__devlink_param_driverinit_value_set(struct devlink *devlink,
+				     unsigned int port_index,
+				     struct list_head *param_list, u32 param_id,
+				     union devlink_param_value init_val,
+				     enum devlink_command cmd)
+{
+	struct devlink_param_item *param_item;
+
+	param_item = devlink_param_find_by_id(param_list, param_id);
+	if (!param_item)
+		return -EINVAL;
+
+	if (!devlink_param_cmode_is_supported(param_item->param,
+					      DEVLINK_PARAM_CMODE_DRIVERINIT))
+		return -EOPNOTSUPP;
+
+	if (param_item->param->type == DEVLINK_PARAM_TYPE_STRING)
+		strcpy(param_item->driverinit_value.vstr, init_val.vstr);
+	else
+		param_item->driverinit_value = init_val;
+	param_item->driverinit_value_valid = true;
+
+	devlink_param_notify(devlink, port_index, param_item, cmd);
+	return 0;
+}
+
+/**
+ *	devlink_param_driverinit_value_get - get configuration parameter
+ *					     value for driver initializing
+ *
+ *	@devlink: devlink
+ *	@param_id: parameter ID
+ *	@init_val: value of parameter in driverinit configuration mode
+ *
+ *	This function should be used by the driver to get driverinit
+ *	configuration for initialization after reload command.
+ */
+int devlink_param_driverinit_value_get(struct devlink *devlink, u32 param_id,
+				       union devlink_param_value *init_val)
+{
+	if (!devlink->ops || !devlink->ops->reload)
+		return -EOPNOTSUPP;
+
+	return __devlink_param_driverinit_value_get(&devlink->param_list,
+						    param_id, init_val);
+}
 EXPORT_SYMBOL_GPL(devlink_param_driverinit_value_get);
 
 /**
@@ -4594,26 +4834,61 @@ EXPORT_SYMBOL_GPL(devlink_param_driverinit_value_get);
 int devlink_param_driverinit_value_set(struct devlink *devlink, u32 param_id,
 				       union devlink_param_value init_val)
 {
-	struct devlink_param_item *param_item;
+	return __devlink_param_driverinit_value_set(devlink, 0,
+						    &devlink->param_list,
+						    param_id, init_val,
+						    DEVLINK_CMD_PARAM_NEW);
+}
+EXPORT_SYMBOL_GPL(devlink_param_driverinit_value_set);
 
-	param_item = devlink_param_find_by_id(&devlink->param_list, param_id);
-	if (!param_item)
-		return -EINVAL;
+/**
+ *	devlink_port_param_driverinit_value_get - get configuration parameter
+ *						value for driver initializing
+ *
+ *	@devlink_port: devlink_port
+ *	@param_id: parameter ID
+ *	@init_val: value of parameter in driverinit configuration mode
+ *
+ *	This function should be used by the driver to get driverinit
+ *	configuration for initialization after reload command.
+ */
+int devlink_port_param_driverinit_value_get(struct devlink_port *devlink_port,
+					    u32 param_id,
+					    union devlink_param_value *init_val)
+{
+	struct devlink *devlink = devlink_port->devlink;
 
-	if (!devlink_param_cmode_is_supported(param_item->param,
-					      DEVLINK_PARAM_CMODE_DRIVERINIT))
+	if (!devlink->ops || !devlink->ops->reload)
 		return -EOPNOTSUPP;
 
-	if (param_item->param->type == DEVLINK_PARAM_TYPE_STRING)
-		strcpy(param_item->driverinit_value.vstr, init_val.vstr);
-	else
-		param_item->driverinit_value = init_val;
-	param_item->driverinit_value_valid = true;
+	return __devlink_param_driverinit_value_get(&devlink_port->param_list,
+						    param_id, init_val);
+}
+EXPORT_SYMBOL_GPL(devlink_port_param_driverinit_value_get);
 
-	devlink_param_notify(devlink, param_item, DEVLINK_CMD_PARAM_NEW);
-	return 0;
+/**
+ *     devlink_port_param_driverinit_value_set - set value of configuration
+ *                                               parameter for driverinit
+ *                                               configuration mode
+ *
+ *     @devlink_port: devlink_port
+ *     @param_id: parameter ID
+ *     @init_val: value of parameter to set for driverinit configuration mode
+ *
+ *     This function should be used by the driver to set driverinit
+ *     configuration mode default value.
+ */
+int devlink_port_param_driverinit_value_set(struct devlink_port *devlink_port,
+					    u32 param_id,
+					    union devlink_param_value init_val)
+{
+	return __devlink_param_driverinit_value_set(devlink_port->devlink,
+						    devlink_port->index,
+						    &devlink_port->param_list,
+						    param_id, init_val,
+						    DEVLINK_CMD_PORT_PARAM_NEW);
 }
-EXPORT_SYMBOL_GPL(devlink_param_driverinit_value_set);
+EXPORT_SYMBOL_GPL(devlink_port_param_driverinit_value_set);
 
 /**
  *	devlink_param_value_changed - notify devlink on a parameter's value
@@ -4626,7 +4901,6 @@ EXPORT_SYMBOL_GPL(devlink_param_driverinit_value_set);
  *	This function should be used by the driver to notify devlink on value
  *	change, excluding driverinit configuration mode.
  *	For driverinit configuration mode driver should use the function
- *	devlink_param_driverinit_value_set() instead.
  */
 void devlink_param_value_changed(struct devlink *devlink, u32 param_id)
 {
@@ -4635,11 +4909,38 @@ void devlink_param_value_changed(struct devlink *devlink, u32 param_id)
 	param_item = devlink_param_find_by_id(&devlink->param_list, param_id);
 	WARN_ON(!param_item);
 
-	devlink_param_notify(devlink, param_item, DEVLINK_CMD_PARAM_NEW);
+	devlink_param_notify(devlink, 0, param_item, DEVLINK_CMD_PARAM_NEW);
 }
 EXPORT_SYMBOL_GPL(devlink_param_value_changed);
 
 /**
+ *     devlink_port_param_value_changed - notify devlink on a parameter's value
+ *                                      change. Should be called by the driver
+ *                                      right after the change.
+ *
+ *     @devlink_port: devlink_port
+ *     @param_id: parameter ID
+ *
+ *     This function should be used by the driver to notify devlink on value
+ *     change, excluding driverinit configuration mode.
+ *     For driverinit configuration mode driver should use the function
+ *     devlink_port_param_driverinit_value_set() instead.
+ */
+void devlink_port_param_value_changed(struct devlink_port *devlink_port,
+				      u32 param_id)
+{
+	struct devlink_param_item *param_item;
+
+	param_item = devlink_param_find_by_id(&devlink_port->param_list,
+					      param_id);
+	WARN_ON(!param_item);
+
+	devlink_param_notify(devlink_port->devlink, devlink_port->index,
+			     param_item, DEVLINK_CMD_PORT_PARAM_NEW);
+}
+EXPORT_SYMBOL_GPL(devlink_port_param_value_changed);
+
+/**
  *	devlink_param_value_str_fill - Safely fill-up the string preventing
  *				       from overflow of the preallocated buffer
  *