Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

3 files changed, 82 insertions, 3 deletions

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index e791487ead37..2f3878806403 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1245,6 +1245,12 @@ enum nl80211_commands {
  * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
  *      or 0 to disable background scan.
  *
+ * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from
+ *	userspace. If unset it is assumed the hint comes directly from
+ *	a user. If set code could specify exactly what type of source
+ *	was used to provide the hint. For the different types of
+ *	allowed user regulatory hints see nl80211_user_reg_hint_type.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1498,6 +1504,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_WDEV,
 
+	NL80211_ATTR_USER_REG_HINT_TYPE,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -1550,6 +1558,8 @@ enum nl80211_attrs {
 /* default RSSI threshold for scan results if none specified. */
 #define NL80211_SCAN_RSSI_THOLD_OFF		-300
 
+#define NL80211_CQM_TXE_MAX_INTVL		1800
+
 /**
  * enum nl80211_iftype - (virtual) interface types
  *
@@ -2059,6 +2069,26 @@ enum nl80211_dfs_regions {
 };
 
 /**
+ * enum nl80211_user_reg_hint_type - type of user regulatory hint
+ *
+ * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always
+ *	assumed if the attribute is not set.
+ * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular
+ *	base station. Device drivers that have been tested to work
+ *	properly to support this type of hint can enable these hints
+ *	by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature
+ *	capability on the struct wiphy. The wireless core will
+ *	ignore all cell base station hints until at least one device
+ *	present has been registered with the wireless core that
+ *	has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
+ *	supported feature.
+ */
+enum nl80211_user_reg_hint_type {
+	NL80211_USER_REG_HINT_USER	= 0,
+	NL80211_USER_REG_HINT_CELL_BASE = 1,
+};
+
+/**
  * enum nl80211_survey_info - survey information
  *
  * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
@@ -2589,6 +2619,17 @@ enum nl80211_ps_state {
  * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
  * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
  *	consecutive packets were not acknowledged by the peer
+ * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures
+ *	during the given %NL80211_ATTR_CQM_TXE_INTVL before an
+ *	%NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and
+ *	%NL80211_ATTR_CQM_TXE_PKTS is generated.
+ * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given
+ *	%NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is
+ *	checked.
+ * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic
+ *	interval in which %NL80211_ATTR_CQM_TXE_PKTS and
+ *	%NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
+ *	%NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
  * @__NL80211_ATTR_CQM_AFTER_LAST: internal
  * @NL80211_ATTR_CQM_MAX: highest key attribute
  */
@@ -2598,6 +2639,9 @@ enum nl80211_attr_cqm {
 	NL80211_ATTR_CQM_RSSI_HYST,
 	NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
 	NL80211_ATTR_CQM_PKT_LOSS_EVENT,
+	NL80211_ATTR_CQM_TXE_RATE,
+	NL80211_ATTR_CQM_TXE_PKTS,
+	NL80211_ATTR_CQM_TXE_INTVL,
 
 	/* keep last */
 	__NL80211_ATTR_CQM_AFTER_LAST,
@@ -2947,11 +2991,15 @@ enum nl80211_ap_sme_features {
  * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
  * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
  *	the connected inactive stations in AP mode.
+ * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
+ *	to work properly to suppport receiving regulatory hints from
+ *	cellular base stations.
  */
 enum nl80211_feature_flags {
 	NL80211_FEATURE_SK_TX_STATUS	= 1 << 0,
 	NL80211_FEATURE_HT_IBSS		= 1 << 1,
 	NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
+	NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
 };
 
 /**
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 5a67165f3b19..493fa0c79005 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1504,8 +1504,6 @@ struct cfg80211_gtk_rekey_data {
  *	interfaces are active this callback should reject the configuration.
  *	If no interfaces are active or the device is down, the channel should
  *	be stored for when a monitor interface becomes active.
- * @set_monitor_enabled: Notify driver that there are only monitor
- *	interfaces running.
  *
  * @scan: Request to do a scan. If returning zero, the scan request is given
  *	the driver, and will be valid until passed to cfg80211_scan_done().
@@ -1575,6 +1573,8 @@ struct cfg80211_gtk_rekey_data {
  * @set_power_mgmt: Configure WLAN power management. A timeout value of -1
  *	allows the driver to adjust the dynamic ps timeout value.
  * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold.
+ * @set_cqm_txe_config: Configure connection quality monitor TX error
+ *	thresholds.
  * @sched_scan_start: Tell the driver to start a scheduled scan.
  * @sched_scan_stop: Tell the driver to stop an ongoing scheduled
  *	scan.  The driver_initiated flag specifies whether the driver
@@ -1612,6 +1612,10 @@ struct cfg80211_gtk_rekey_data {
  * @get_et_strings:  Ethtool API to get a set of strings to describe stats
  *	and perhaps other supported types of ethtool data-sets.
  *	See @ethtool_ops.get_strings
+ *
+ * @get_channel: Get the current operating channel for the virtual interface.
+ *	For monitor interfaces, it should return %NULL unless there's a single
+ *	current monitoring channel.
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -1781,6 +1785,10 @@ struct cfg80211_ops {
 				       struct net_device *dev,
 				       s32 rssi_thold, u32 rssi_hyst);
 
+	int	(*set_cqm_txe_config)(struct wiphy *wiphy,
+				      struct net_device *dev,
+				      u32 rate, u32 pkts, u32 intvl);
+
 	void	(*mgmt_frame_register)(struct wiphy *wiphy,
 				       struct wireless_dev *wdev,
 				       u16 frame_type, bool reg);
@@ -1820,7 +1828,10 @@ struct cfg80211_ops {
 	void	(*get_et_strings)(struct wiphy *wiphy, struct net_device *dev,
 				  u32 sset, u8 *data);
 
-	void (*set_monitor_enabled)(struct wiphy *wiphy, bool enabled);
+	struct ieee80211_channel *
+		(*get_channel)(struct wiphy *wiphy,
+			       struct wireless_dev *wdev,
+			       enum nl80211_channel_type *type);
 };
 
 /*
@@ -3391,6 +3402,21 @@ void cfg80211_cqm_pktloss_notify(struct net_device *dev,
 				 const u8 *peer, u32 num_packets, gfp_t gfp);
 
 /**
+ * cfg80211_cqm_txe_notify - TX error rate event
+ * @dev: network device
+ * @peer: peer's MAC address
+ * @num_packets: how many packets were lost
+ * @rate: % of packets which failed transmission
+ * @intvl: interval (in s) over which the TX failure threshold was breached.
+ * @gfp: context flags
+ *
+ * Notify userspace when configured % TX failures over number of packets in a
+ * given interval is exceeded.
+ */
+void cfg80211_cqm_txe_notify(struct net_device *dev, const u8 *peer,
+			     u32 num_packets, u32 rate, u32 intvl, gfp_t gfp);
+
+/**
  * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying
  * @dev: network device
  * @bssid: BSSID of AP (to avoid races)
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index a5f79933e211..7dcaa2794fde 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -52,6 +52,10 @@ enum environment_cap {
  *	DFS master operation on a known DFS region (NL80211_DFS_*),
  *	dfs_region represents that region. Drivers can use this and the
  *	@alpha2 to adjust their device's DFS parameters as required.
+ * @user_reg_hint_type: if the @initiator was of type
+ *	%NL80211_REGDOM_SET_BY_USER, this classifies the type
+ *	of hint passed. This could be any of the %NL80211_USER_REG_HINT_*
+ *	types.
  * @intersect: indicates whether the wireless core should intersect
  * 	the requested regulatory domain with the presently set regulatory
  * 	domain.
@@ -70,6 +74,7 @@ enum environment_cap {
 struct regulatory_request {
 	int wiphy_idx;
 	enum nl80211_reg_initiator initiator;
+	enum nl80211_user_reg_hint_type user_reg_hint_type;
 	char alpha2[2];
 	u8 dfs_region;
 	bool intersect;