diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-11-14 18:01:46 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-11-14 18:01:46 -0800 |
commit | 4e4510fec4af08ead21f6934c1410af1f19a8cad (patch) | |
tree | 2bafab4f7cc2cdf2983186b24140f6303d4dfc8c /include | |
parent | 4008e6a9bcee2f3b61bb11951de0fb0ed764cb91 (diff) | |
parent | 7087cb8fad5e19113d82f47f351fc6b338948d5f (diff) |
Merge tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are no big surprising changes in this cycle, yet not too boring,
either. The biggest change from diffstat POV is the removal of the
legacy OSS driver codes that have been already disabled for a long
time. This will bring a few trivial merge conflicts.
As new features in ASoC side, there are two things: a new AC97 bus
implementation and AMD Stony platform support. Both include the
relevant changes shared with other subsystems, e.g. AC97 MFD changes
and DRM AMD changes.
Some other highlighted topics are:
- A bunch of USB-audio drivers got the hardening against the
malicious device accesses with a new helper code for endpoint
sanity check
- Lots of cleanups for ASoC Intel platform code, including support
for their open source audio firmware
- Continued ASoC core componentization works
- Support for scaling MCLK with sample rate in ASoC simple-card
- Stabler PCM hot-unplug capability, especially for ASoC usages"
* tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits)
Documentation: sound: hd-audio: notes.rst
ASoC: bcm2835: Support left/right justified and DSP modes
ASoC: bcm2835: Enforce full symmetry
ASoC: bcm2835: Support additional samplerates up to 384kHz
ASoC: bcm2835: Add support for TDM modes
ASoC: add mclk-fs support to audio graph card
ASoC: add mclk-fs to audio graph card binding
ASoC: rt5514: work around link error
ASoC: rt5514: mark PM functions as __maybe_unused
ASoC: rt5663: Check the JD status in the button pushing
ASoC: amd: Modified DMA transfer Mechanism for Playback
ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2
ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+
ASoC: da7213: add support for DSP modes
ASoC: sun8i-codec: Add a comment on the LRCK inversion
ASoC: sun8i-codec: Set the BCLK divider
ASoC: rt5663: Delay and retry reading rt5663 ID register
ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds
ASoC: cs42l56: Fix reset GPIO name in example DT binding
ASoC: rt5514-spi: check irq status to schedule data copy in resume function
...
Diffstat (limited to 'include')
-rw-r--r-- | include/drm/amd_asic_type.h | 52 | ||||
-rw-r--r-- | include/linux/mfd/arizona/pdata.h | 3 | ||||
-rw-r--r-- | include/linux/mfd/wm97xx.h | 25 | ||||
-rw-r--r-- | include/linux/usb.h | 2 | ||||
-rw-r--r-- | include/sound/ac97/codec.h | 118 | ||||
-rw-r--r-- | include/sound/ac97/compat.h | 20 | ||||
-rw-r--r-- | include/sound/ac97/controller.h | 85 | ||||
-rw-r--r-- | include/sound/ac97/regs.h | 262 | ||||
-rw-r--r-- | include/sound/ac97_codec.h | 239 | ||||
-rw-r--r-- | include/sound/core.h | 2 | ||||
-rw-r--r-- | include/sound/hdaudio.h | 3 | ||||
-rw-r--r-- | include/sound/pxa2xx-lib.h | 15 | ||||
-rw-r--r-- | include/sound/rt5651.h | 8 | ||||
-rw-r--r-- | include/sound/rt5663.h | 3 | ||||
-rw-r--r-- | include/sound/snd_wavefront.h | 1 | ||||
-rw-r--r-- | include/sound/soc-acpi-intel-match.h | 32 | ||||
-rw-r--r-- | include/sound/soc-acpi.h | 111 | ||||
-rw-r--r-- | include/sound/soc.h | 115 |
18 files changed, 850 insertions, 246 deletions
diff --git a/include/drm/amd_asic_type.h b/include/drm/amd_asic_type.h new file mode 100644 index 000000000000..599028f66585 --- /dev/null +++ b/include/drm/amd_asic_type.h @@ -0,0 +1,52 @@ +/* + * Copyright 2017 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef __AMD_ASIC_TYPE_H__ +#define __AMD_ASIC_TYPE_H__ +/* + * Supported ASIC types + */ +enum amd_asic_type { + CHIP_TAHITI = 0, + CHIP_PITCAIRN, + CHIP_VERDE, + CHIP_OLAND, + CHIP_HAINAN, + CHIP_BONAIRE, + CHIP_KAVERI, + CHIP_KABINI, + CHIP_HAWAII, + CHIP_MULLINS, + CHIP_TOPAZ, + CHIP_TONGA, + CHIP_FIJI, + CHIP_CARRIZO, + CHIP_STONEY, + CHIP_POLARIS10, + CHIP_POLARIS11, + CHIP_POLARIS12, + CHIP_VEGA10, + CHIP_RAVEN, + CHIP_LAST, +}; + +#endif /*__AMD_ASIC_TYPE_H__ */ diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index bfeecf179895..f72dc53848d7 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -174,6 +174,9 @@ struct arizona_pdata { /** Mode for outputs */ int out_mono[ARIZONA_MAX_OUTPUT]; + /** Limit output volumes */ + unsigned int out_vol_limit[2 * ARIZONA_MAX_OUTPUT]; + /** PDM speaker mute setting */ unsigned int spk_mute[ARIZONA_MAX_PDM_SPK]; diff --git a/include/linux/mfd/wm97xx.h b/include/linux/mfd/wm97xx.h new file mode 100644 index 000000000000..45fb54f19d09 --- /dev/null +++ b/include/linux/mfd/wm97xx.h @@ -0,0 +1,25 @@ +/* + * wm97xx client interface + * + * Copyright (C) 2017 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_MFD_WM97XX_H +#define __LINUX_MFD_WM97XX_H + +struct regmap; +struct wm97xx_batt_pdata; +struct snd_ac97; + +struct wm97xx_platform_data { + struct snd_ac97 *ac97; + struct regmap *regmap; + struct wm97xx_batt_pdata *batt_pdata; +}; + +#endif diff --git a/include/linux/usb.h b/include/linux/usb.h index f019b0397599..fbbe974661f2 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1729,6 +1729,8 @@ static inline int usb_urb_dir_out(struct urb *urb) return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT; } +int usb_urb_ep_type_check(const struct urb *urb); + void *usb_alloc_coherent(struct usb_device *dev, size_t size, gfp_t mem_flags, dma_addr_t *dma); void usb_free_coherent(struct usb_device *dev, size_t size, diff --git a/include/sound/ac97/codec.h b/include/sound/ac97/codec.h new file mode 100644 index 000000000000..ec04be9ab119 --- /dev/null +++ b/include/sound/ac97/codec.h @@ -0,0 +1,118 @@ +/* + * Copyright (C) 2016 Robert Jarzmik <robert.jarzmik@free.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __SOUND_AC97_CODEC2_H +#define __SOUND_AC97_CODEC2_H + +#include <linux/device.h> + +#define AC97_ID(vendor_id1, vendor_id2) \ + ((((vendor_id1) & 0xffff) << 16) | ((vendor_id2) & 0xffff)) +#define AC97_DRIVER_ID(vendor_id1, vendor_id2, mask_id1, mask_id2, _data) \ + { .id = (((vendor_id1) & 0xffff) << 16) | ((vendor_id2) & 0xffff), \ + .mask = (((mask_id1) & 0xffff) << 16) | ((mask_id2) & 0xffff), \ + .data = (_data) } + +struct ac97_controller; +struct clk; + +/** + * struct ac97_id - matches a codec device and driver on an ac97 bus + * @id: The significant bits if the codec vendor ID1 and ID2 + * @mask: Bitmask specifying which bits of the id field are significant when + * matching. A driver binds to a device when : + * ((vendorID1 << 8 | vendorID2) & (mask_id1 << 8 | mask_id2)) == id. + * @data: Private data used by the driver. + */ +struct ac97_id { + unsigned int id; + unsigned int mask; + void *data; +}; + +/** + * ac97_codec_device - a ac97 codec + * @dev: the core device + * @vendor_id: the vendor_id of the codec, as sensed on the AC-link + * @num: the codec number, 0 is primary, 1 is first slave, etc ... + * @clk: the clock BIT_CLK provided by the codec + * @ac97_ctrl: ac97 digital controller on the same AC-link + * + * This is the device instantiated for each codec living on a AC-link. There are + * normally 0 to 4 codec devices per AC-link, and all of them are controlled by + * an AC97 digital controller. + */ +struct ac97_codec_device { + struct device dev; + unsigned int vendor_id; + unsigned int num; + struct clk *clk; + struct ac97_controller *ac97_ctrl; +}; + +/** + * ac97_codec_driver - a ac97 codec driver + * @driver: the device driver structure + * @probe: the function called when a ac97_codec_device is matched + * @remove: the function called when the device is unbound/removed + * @shutdown: shutdown function (might be NULL) + * @id_table: ac97 vendor_id match table, { } member terminated + */ +struct ac97_codec_driver { + struct device_driver driver; + int (*probe)(struct ac97_codec_device *); + int (*remove)(struct ac97_codec_device *); + void (*shutdown)(struct ac97_codec_device *); + const struct ac97_id *id_table; +}; + +static inline struct ac97_codec_device *to_ac97_device(struct device *d) +{ + return container_of(d, struct ac97_codec_device, dev); +} + +static inline struct ac97_codec_driver *to_ac97_driver(struct device_driver *d) +{ + return container_of(d, struct ac97_codec_driver, driver); +} + +#if IS_ENABLED(CONFIG_AC97_BUS_NEW) +int snd_ac97_codec_driver_register(struct ac97_codec_driver *drv); +void snd_ac97_codec_driver_unregister(struct ac97_codec_driver *drv); +#else +static inline int +snd_ac97_codec_driver_register(struct ac97_codec_driver *drv) +{ + return 0; +} +static inline void +snd_ac97_codec_driver_unregister(struct ac97_codec_driver *drv) +{ +} +#endif + + +static inline struct device * +ac97_codec_dev2dev(struct ac97_codec_device *adev) +{ + return &adev->dev; +} + +static inline void *ac97_get_drvdata(struct ac97_codec_device *adev) +{ + return dev_get_drvdata(ac97_codec_dev2dev(adev)); +} + +static inline void ac97_set_drvdata(struct ac97_codec_device *adev, + void *data) +{ + dev_set_drvdata(ac97_codec_dev2dev(adev), data); +} + +void *snd_ac97_codec_get_platdata(const struct ac97_codec_device *adev); + +#endif diff --git a/include/sound/ac97/compat.h b/include/sound/ac97/compat.h new file mode 100644 index 000000000000..1351cba40048 --- /dev/null +++ b/include/sound/ac97/compat.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2016 Robert Jarzmik <robert.jarzmik@free.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file is for backward compatibility with snd_ac97 structure and its + * multiple usages, such as the snd_ac97_bus and snd_ac97_build_ops. + * + */ +#ifndef AC97_COMPAT_H +#define AC97_COMPAT_H + +#include <sound/ac97_codec.h> + +struct snd_ac97 *snd_ac97_compat_alloc(struct ac97_codec_device *adev); +void snd_ac97_compat_release(struct snd_ac97 *ac97); + +#endif diff --git a/include/sound/ac97/controller.h b/include/sound/ac97/controller.h new file mode 100644 index 000000000000..b36ecdd64f14 --- /dev/null +++ b/include/sound/ac97/controller.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2016 Robert Jarzmik <robert.jarzmik@free.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef AC97_CONTROLLER_H +#define AC97_CONTROLLER_H + +#include <linux/device.h> +#include <linux/list.h> + +#define AC97_BUS_MAX_CODECS 4 +#define AC97_SLOTS_AVAILABLE_ALL 0xf + +struct ac97_controller_ops; + +/** + * struct ac97_controller - The AC97 controller of the AC-Link + * @ops: the AC97 operations. + * @controllers: linked list of all existing controllers. + * @adap: the shell device ac97-%d, ie. ac97 adapter + * @nr: the number of the shell device + * @slots_available: the mask of accessible/scanable codecs. + * @parent: the device providing the AC97 controller. + * @codecs: the 4 possible AC97 codecs (NULL if none found). + * @codecs_pdata: platform_data for each codec (NULL if no pdata). + * + * This structure is internal to AC97 bus, and should not be used by the + * controllers themselves, excepting for using @dev. + */ +struct ac97_controller { + const struct ac97_controller_ops *ops; + struct list_head controllers; + struct device adap; + int nr; + unsigned short slots_available; + struct device *parent; + struct ac97_codec_device *codecs[AC97_BUS_MAX_CODECS]; + void *codecs_pdata[AC97_BUS_MAX_CODECS]; +}; + +/** + * struct ac97_controller_ops - The AC97 operations + * @reset: Cold reset of the AC97 AC-Link. + * @warm_reset: Warm reset of the AC97 AC-Link. + * @read: Read of a single AC97 register. + * Returns the register value or a negative error code. + * @write: Write of a single AC97 register. + * + * These are the basic operation an AC97 controller must provide for an AC97 + * access functions. Amongst these, all but the last 2 are mandatory. + * The slot number is also known as the AC97 codec number, between 0 and 3. + */ +struct ac97_controller_ops { + void (*reset)(struct ac97_controller *adrv); + void (*warm_reset)(struct ac97_controller *adrv); + int (*write)(struct ac97_controller *adrv, int slot, + unsigned short reg, unsigned short val); + int (*read)(struct ac97_controller *adrv, int slot, unsigned short reg); +}; + +#if IS_ENABLED(CONFIG_AC97_BUS_NEW) +struct ac97_controller *snd_ac97_controller_register( + const struct ac97_controller_ops *ops, struct device *dev, + unsigned short slots_available, void **codecs_pdata); +void snd_ac97_controller_unregister(struct ac97_controller *ac97_ctrl); +#else +static inline struct ac97_controller * +snd_ac97_controller_register(const struct ac97_controller_ops *ops, + struct device *dev, + unsigned short slots_available, + void **codecs_pdata) +{ + return ERR_PTR(-ENODEV); +} + +static inline void +snd_ac97_controller_unregister(struct ac97_controller *ac97_ctrl) +{ +} +#endif + +#endif diff --git a/include/sound/ac97/regs.h b/include/sound/ac97/regs.h new file mode 100644 index 000000000000..4bb86d379bd5 --- /dev/null +++ b/include/sound/ac97/regs.h @@ -0,0 +1,262 @@ +/* + * Copyright (c) by Jaroslav Kysela <perex@perex.cz> + * Universal interface for Audio Codec '97 + * + * For more details look to AC '97 component specification revision 2.1 + * by Intel Corporation (http://developer.intel.com). + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/* + * AC'97 codec registers + */ + +#define AC97_RESET 0x00 /* Reset */ +#define AC97_MASTER 0x02 /* Master Volume */ +#define AC97_HEADPHONE 0x04 /* Headphone Volume (optional) */ +#define AC97_MASTER_MONO 0x06 /* Master Volume Mono (optional) */ +#define AC97_MASTER_TONE 0x08 /* Master Tone (Bass & Treble) (optional) */ +#define AC97_PC_BEEP 0x0a /* PC Beep Volume (optinal) */ +#define AC97_PHONE 0x0c /* Phone Volume (optional) */ +#define AC97_MIC 0x0e /* MIC Volume */ +#define AC97_LINE 0x10 /* Line In Volume */ +#define AC97_CD 0x12 /* CD Volume */ +#define AC97_VIDEO 0x14 /* Video Volume (optional) */ +#define AC97_AUX 0x16 /* AUX Volume (optional) */ +#define AC97_PCM 0x18 /* PCM Volume */ +#define AC97_REC_SEL 0x1a /* Record Select */ +#define AC97_REC_GAIN 0x1c /* Record Gain */ +#define AC97_REC_GAIN_MIC 0x1e /* Record Gain MIC (optional) */ +#define AC97_GENERAL_PURPOSE 0x20 /* General Purpose (optional) */ +#define AC97_3D_CONTROL 0x22 /* 3D Control (optional) */ +#define AC97_INT_PAGING 0x24 /* Audio Interrupt & Paging (AC'97 2.3) */ +#define AC97_POWERDOWN 0x26 /* Powerdown control / status */ +/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */ +#define AC97_EXTENDED_ID 0x28 /* Extended Audio ID */ +#define AC97_EXTENDED_STATUS 0x2a /* Extended Audio Status and Control */ +#define AC97_PCM_FRONT_DAC_RATE 0x2c /* PCM Front DAC Rate */ +#define AC97_PCM_SURR_DAC_RATE 0x2e /* PCM Surround DAC Rate */ +#define AC97_PCM_LFE_DAC_RATE 0x30 /* PCM LFE DAC Rate */ +#define AC97_PCM_LR_ADC_RATE 0x32 /* PCM LR ADC Rate */ +#define AC97_PCM_MIC_ADC_RATE 0x34 /* PCM MIC ADC Rate */ +#define AC97_CENTER_LFE_MASTER 0x36 /* Center + LFE Master Volume */ +#define AC97_SURROUND_MASTER 0x38 /* Surround (Rear) Master Volume */ +#define AC97_SPDIF 0x3a /* S/PDIF control */ +/* range 0x3c-0x58 - MODEM */ +#define AC97_EXTENDED_MID 0x3c /* Extended Modem ID */ +#define AC97_EXTENDED_MSTATUS 0x3e /* Extended Modem Status and Control */ +#define AC97_LINE1_RATE 0x40 /* Line1 DAC/ADC Rate */ +#define AC97_LINE2_RATE 0x42 /* Line2 DAC/ADC Rate */ +#define AC97_HANDSET_RATE 0x44 /* Handset DAC/ADC Rate */ +#define AC97_LINE1_LEVEL 0x46 /* Line1 DAC/ADC Level */ +#define AC97_LINE2_LEVEL 0x48 /* Line2 DAC/ADC Level */ +#define AC97_HANDSET_LEVEL 0x4a /* Handset DAC/ADC Level */ +#define AC97_GPIO_CFG 0x4c /* GPIO Configuration */ +#define AC97_GPIO_POLARITY 0x4e /* GPIO Pin Polarity/Type, 0=low, 1=high active */ +#define AC97_GPIO_STICKY 0x50 /* GPIO Pin Sticky, 0=not, 1=sticky */ +#define AC97_GPIO_WAKEUP 0x52 /* GPIO Pin Wakeup, 0=no int, 1=yes int */ +#define AC97_GPIO_STATUS 0x54 /* GPIO Pin Status, slot 12 */ +#define AC97_MISC_AFE 0x56 /* Miscellaneous Modem AFE Status and Control */ +/* range 0x5a-0x7b - Vendor Specific */ +#define AC97_VENDOR_ID1 0x7c /* Vendor ID1 */ +#define AC97_VENDOR_ID2 0x7e /* Vendor ID2 / revision */ +/* range 0x60-0x6f (page 1) - extended codec registers */ +#define AC97_CODEC_CLASS_REV 0x60 /* Codec Class/Revision */ +#define AC97_PCI_SVID 0x62 /* PCI Subsystem Vendor ID */ +#define AC97_PCI_SID 0x64 /* PCI Subsystem ID */ +#define AC97_FUNC_SELECT 0x66 /* Function Select */ +#define AC97_FUNC_INFO 0x68 /* Function Information */ +#define AC97_SENSE_INFO 0x6a /* Sense Details */ + +/* volume controls */ +#define AC97_MUTE_MASK_MONO 0x8000 +#define AC97_MUTE_MASK_STEREO 0x8080 + +/* slot allocation */ +#define AC97_SLOT_TAG 0 +#define AC97_SLOT_CMD_ADDR 1 +#define AC97_SLOT_CMD_DATA 2 +#define AC97_SLOT_PCM_LEFT 3 +#define AC97_SLOT_PCM_RIGHT 4 +#define AC97_SLOT_MODEM_LINE1 5 +#define AC97_SLOT_PCM_CENTER 6 +#define AC97_SLOT_MIC 6 /* input */ +#define AC97_SLOT_SPDIF_LEFT1 6 +#define AC97_SLOT_PCM_SLEFT 7 /* surround left */ +#define AC97_SLOT_PCM_LEFT_0 7 /* double rate operation */ +#define AC97_SLOT_SPDIF_LEFT 7 +#define AC97_SLOT_PCM_SRIGHT 8 /* surround right */ +#define AC97_SLOT_PCM_RIGHT_0 8 /* double rate operation */ +#define AC97_SLOT_SPDIF_RIGHT 8 +#define AC97_SLOT_LFE 9 +#define AC97_SLOT_SPDIF_RIGHT1 9 +#define AC97_SLOT_MODEM_LINE2 10 +#define AC97_SLOT_PCM_LEFT_1 10 /* double rate operation */ +#define AC97_SLOT_SPDIF_LEFT2 10 +#define AC97_SLOT_HANDSET 11 /* output */ +#define AC97_SLOT_PCM_RIGHT_1 11 /* double rate operation */ +#define AC97_SLOT_SPDIF_RIGHT2 11 +#define AC97_SLOT_MODEM_GPIO 12 /* modem GPIO */ +#define AC97_SLOT_PCM_CENTER_1 12 /* double rate operation */ + +/* basic capabilities (reset register) */ +#define AC97_BC_DEDICATED_MIC 0x0001 /* Dedicated Mic PCM In Channel */ +#define AC97_BC_RESERVED1 0x0002 /* Reserved (was Modem Line Codec support) */ +#define AC97_BC_BASS_TREBLE 0x0004 /* Bass & Treble Control */ +#define AC97_BC_SIM_STEREO 0x0008 /* Simulated stereo */ +#define AC97_BC_HEADPHONE 0x0010 /* Headphone Out Support */ +#define AC97_BC_LOUDNESS 0x0020 /* Loudness (bass boost) Support */ +#define AC97_BC_16BIT_DAC 0x0000 /* 16-bit DAC resolution */ +#define AC97_BC_18BIT_DAC 0x0040 /* 18-bit DAC resolution */ +#define AC97_BC_20BIT_DAC 0x0080 /* 20-bit DAC resolution */ +#define AC97_BC_DAC_MASK 0x00c0 +#define AC97_BC_16BIT_ADC 0x0000 /* 16-bit ADC resolution */ +#define AC97_BC_18BIT_ADC 0x0100 /* 18-bit ADC resolution */ +#define AC97_BC_20BIT_ADC 0x0200 /* 20-bit ADC resolution */ +#define AC97_BC_ADC_MASK 0x0300 +#define AC97_BC_3D_TECH_ID_MASK 0x7c00 /* Per-vendor ID of 3D enhancement */ + +/* general purpose */ +#define AC97_GP_DRSS_MASK 0x0c00 /* double rate slot select */ +#define AC97_GP_DRSS_1011 0x0000 /* LR(C) 10+11(+12) */ +#define AC97_GP_DRSS_78 0x0400 /* LR 7+8 */ + +/* powerdown bits */ +#define AC97_PD_ADC_STATUS 0x0001 /* ADC status (RO) */ +#define AC97_PD_DAC_STATUS 0x0002 /* DAC status (RO) */ +#define AC97_PD_MIXER_STATUS 0x0004 /* Analog mixer status (RO) */ +#define AC97_PD_VREF_STATUS 0x0008 /* Vref status (RO) */ +#define AC97_PD_PR0 0x0100 /* Power down PCM ADCs and input MUX */ +#define AC97_PD_PR1 0x0200 /* Power down PCM front DAC */ +#define AC97_PD_PR2 0x0400 /* Power down Mixer (Vref still on) */ +#define AC97_PD_PR3 0x0800 /* Power down Mixer (Vref off) */ +#define AC97_PD_PR4 0x1000 /* Power down AC-Link */ +#define AC97_PD_PR5 0x2000 /* Disable internal clock usage */ +#define AC97_PD_PR6 0x4000 /* Headphone amplifier */ +#define AC97_PD_EAPD 0x8000 /* External Amplifer Power Down (EAPD) */ + +/* extended audio ID bit defines */ +#define AC97_EI_VRA 0x0001 /* Variable bit rate supported */ +#define AC97_EI_DRA 0x0002 /* Double rate supported */ +#define AC97_EI_SPDIF 0x0004 /* S/PDIF out supported */ +#define AC97_EI_VRM 0x0008 /* Variable bit rate supported for MIC */ +#define AC97_EI_DACS_SLOT_MASK 0x0030 /* DACs slot assignment */ +#define AC97_EI_DACS_SLOT_SHIFT 4 +#define AC97_EI_CDAC 0x0040 /* PCM Center DAC available */ +#define AC97_EI_SDAC 0x0080 /* PCM Surround DACs available */ +#define AC97_EI_LDAC 0x0100 /* PCM LFE DAC available */ +#define AC97_EI_AMAP 0x0200 /* indicates optional slot/DAC mapping based on codec ID */ +#define AC97_EI_REV_MASK 0x0c00 /* AC'97 revision mask */ +#define AC97_EI_REV_22 0x0400 /* AC'97 revision 2.2 */ +#define AC97_EI_REV_23 0x0800 /* AC'97 revision 2.3 */ +#define AC97_EI_REV_SHIFT 10 +#define AC97_EI_ADDR_MASK 0xc000 /* physical codec ID (address) */ +#define AC97_EI_ADDR_SHIFT 14 + +/* extended audio status and control bit defines */ +#define AC97_EA_VRA 0x0001 /* Variable bit rate enable bit */ +#define AC97_EA_DRA 0x0002 /* Double-rate audio enable bit */ +#define AC97_EA_SPDIF 0x0004 /* S/PDIF out enable bit */ +#define AC97_EA_VRM 0x0008 /* Variable bit rate for MIC enable bit */ +#define AC97_EA_SPSA_SLOT_MASK 0x0030 /* Mask for slot assignment bits */ +#define AC97_EA_SPSA_SLOT_SHIFT 4 +#define AC97_EA_SPSA_3_4 0x0000 /* Slot assigned to 3 & 4 */ +#define AC97_EA_SPSA_7_8 0x0010 /* Slot assigned to 7 & 8 */ +#define AC97_EA_SPSA_6_9 0x0020 /* Slot assigned to 6 & 9 */ +#define AC97_EA_SPSA_10_11 0x0030 /* Slot assigned to 10 & 11 */ +#define AC97_EA_CDAC 0x0040 /* PCM Center DAC is ready (Read only) */ +#define AC97_EA_SDAC 0x0080 /* PCM Surround DACs are ready (Read only) */ +#define AC97_EA_LDAC 0x0100 /* PCM LFE DAC is ready (Read only) */ +#define AC97_EA_MDAC 0x0200 /* MIC ADC is ready (Read only) */ +#define AC97_EA_SPCV 0x0400 /* S/PDIF configuration valid (Read only) */ +#define AC97_EA_PRI 0x0800 /* Turns the PCM Center DAC off */ +#define AC97_EA_PRJ 0x1000 /* Turns the PCM Surround DACs off */ +#define AC97_EA_PRK 0x2000 /* Turns the PCM LFE DAC off */ +#define AC97_EA_PRL 0x4000 /* Turns the MIC ADC off */ + +/* S/PDIF control bit defines */ +#define AC97_SC_PRO 0x0001 /* Professional status */ +#define AC97_SC_NAUDIO 0x0002 /* Non audio stream */ +#define AC97_SC_COPY 0x0004 /* Copyright status */ +#define AC97_SC_PRE 0x0008 /* Preemphasis status */ +#define AC97_SC_CC_MASK 0x07f0 /* Category Code mask */ +#define AC97_SC_CC_SHIFT 4 +#define AC97_SC_L 0x0800 /* Generation Level status */ +#define AC97_SC_SPSR_MASK 0x3000 /* S/PDIF Sample Rate bits */ +#define AC97_SC_SPSR_SHIFT 12 +#define AC97_SC_SPSR_44K 0x0000 /* Use 44.1kHz Sample rate */ +#define AC97_SC_SPSR_48K 0x2000 /* Use 48kHz Sample rate */ +#define AC97_SC_SPSR_32K 0x3000 /* Use 32kHz Sample rate */ +#define AC97_SC_DRS 0x4000 /* Double Rate S/PDIF */ +#define AC97_SC_V 0x8000 /* Validity status */ + +/* Interrupt and Paging bit defines (AC'97 2.3) */ +#define AC97_PAGE_MASK 0x000f /* Page Selector */ +#define AC97_PAGE_VENDOR 0 /* Vendor-specific registers */ +#define AC97_PAGE_1 1 /* Extended Codec Registers page 1 */ +#define AC97_INT_ENABLE 0x0800 /* Interrupt Enable */ +#define AC97_INT_SENSE 0x1000 /* Sense Cycle */ +#define AC97_INT_CAUSE_SENSE 0x2000 /* Sense Cycle Completed (RO) */ +#define AC97_INT_CAUSE_GPIO 0x4000 /* GPIO bits changed (RO) */ +#define AC97_INT_STATUS 0x8000 /* Interrupt Status */ + +/* extended modem ID bit defines */ +#define AC97_MEI_LINE1 0x0001 /* Line1 present */ +#define AC97_MEI_LINE2 0x0002 /* Line2 present */ +#define AC97_MEI_HANDSET 0x0004 /* Handset present */ +#define AC97_MEI_CID1 0x0008 /* caller ID decode for Line1 is supported */ +#define AC97_MEI_CID2 0x0010 /* caller ID decode for Line2 is supported */ +#define AC97_MEI_ADDR_MASK 0xc000 /* physical codec ID (address) */ +#define AC97_MEI_ADDR_SHIFT 14 + +/* extended modem status and control bit defines */ +#define AC97_MEA_GPIO 0x0001 /* GPIO is ready (ro) */ +#define AC97_MEA_MREF 0x0002 /* Vref is up to nominal level (ro) */ +#define AC97_MEA_ADC1 0x0004 /* ADC1 operational (ro) */ +#define AC97_MEA_DAC1 0x0008 /* DAC1 operational (ro) */ +#define AC97_MEA_ADC2 0x0010 /* ADC2 operational (ro) */ +#define AC97_MEA_DAC2 0x0020 /* DAC2 operational (ro) */ +#define AC97_MEA_HADC 0x0040 /* HADC operational (ro) */ +#define AC97_MEA_HDAC 0x0080 /* HDAC operational (ro) */ +#define AC97_MEA_PRA 0x0100 /* GPIO power down (high) */ +#define AC97_MEA_PRB 0x0200 /* reserved */ +#define AC97_MEA_PRC 0x0400 /* ADC1 power down (high) */ +#define AC97_MEA_PRD 0x0800 /* DAC1 power down (high) */ +#define AC97_MEA_PRE 0x1000 /* ADC2 power down (high) */ +#define AC97_MEA_PRF 0x2000 /* DAC2 power down (high) */ +#define AC97_MEA_PRG 0x4000 /* HADC power down (high) */ +#define AC97_MEA_PRH 0x8000 /* HDAC power down (high) */ + +/* modem gpio status defines */ +#define AC97_GPIO_LINE1_OH 0x0001 /* Off Hook Line1 */ +#define AC97_GPIO_LINE1_RI 0x0002 /* Ring Detect Line1 */ +#define AC97_GPIO_LINE1_CID 0x0004 /* Caller ID path enable Line1 */ +#define AC97_GPIO_LINE1_LCS 0x0008 /* Loop Current Sense Line1 */ +#define AC97_GPIO_LINE1_PULSE 0x0010 /* Opt./ Pulse Dial Line1 (out) */ +#define AC97_GPIO_LINE1_HL1R 0x0020 /* Opt./ Handset to Line1 relay control (out) */ +#define AC97_GPIO_LINE1_HOHD 0x0040 /* Opt./ Handset off hook detect Line1 (in) */ +#define AC97_GPIO_LINE12_AC 0x0080 /* Opt./ Int.bit 1 / Line1/2 AC (out) */ +#define AC97_GPIO_LINE12_DC 0x0100 /* Opt./ Int.bit 2 / Line1/2 DC (out) */ +#define AC97_GPIO_LINE12_RS 0x0200 /* Opt./ Int.bit 3 / Line1/2 RS (out) */ +#define AC97_GPIO_LINE2_OH 0x0400 /* Off Hook Line2 */ +#define AC97_GPIO_LINE2_RI 0x0800 /* Ring Detect Line2 */ +#define AC97_GPIO_LINE2_CID 0x1000 /* Caller ID path enable Line2 */ +#define AC97_GPIO_LINE2_LCS 0x2000 /* Loop Current Sense Line2 */ +#define AC97_GPIO_LINE2_PULSE 0x4000 /* Opt./ Pulse Dial Line2 (out) */ +#define AC97_GPIO_LINE2_HL1R 0x8000 /* Opt./ Handset to Line2 relay control (out) */ + diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index 15aa5f07c955..89d311a503d3 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -28,6 +28,7 @@ #include <linux/bitops.h> #include <linux/device.h> #include <linux/workqueue.h> +#include <sound/ac97/regs.h> #include <sound/pcm.h> #include <sound/control.h> #include <sound/info.h> @@ -35,244 +36,6 @@ /* maximum number of devices on the AC97 bus */ #define AC97_BUS_MAX_DEVICES 4 -/* - * AC'97 codec registers - */ - -#define AC97_RESET 0x00 /* Reset */ -#define AC97_MASTER 0x02 /* Master Volume */ -#define AC97_HEADPHONE 0x04 /* Headphone Volume (optional) */ -#define AC97_MASTER_MONO 0x06 /* Master Volume Mono (optional) */ -#define AC97_MASTER_TONE 0x08 /* Master Tone (Bass & Treble) (optional) */ -#define AC97_PC_BEEP 0x0a /* PC Beep Volume (optinal) */ -#define AC97_PHONE 0x0c /* Phone Volume (optional) */ -#define AC97_MIC 0x0e /* MIC Volume */ -#define AC97_LINE 0x10 /* Line In Volume */ -#define AC97_CD 0x12 /* CD Volume */ -#define AC97_VIDEO 0x14 /* Video Volume (optional) */ -#define AC97_AUX 0x16 /* AUX Volume (optional) */ -#define AC97_PCM 0x18 /* PCM Volume */ -#define AC97_REC_SEL 0x1a /* Record Select */ -#define AC97_REC_GAIN 0x1c /* Record Gain */ -#define AC97_REC_GAIN_MIC 0x1e /* Record Gain MIC (optional) */ -#define AC97_GENERAL_PURPOSE 0x20 /* General Purpose (optional) */ -#define AC97_3D_CONTROL 0x22 /* 3D Control (optional) */ -#define AC97_INT_PAGING 0x24 /* Audio Interrupt & Paging (AC'97 2.3) */ -#define AC97_POWERDOWN 0x26 /* Powerdown control / status */ -/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */ -#define AC97_EXTENDED_ID 0x28 /* Extended Audio ID */ -#define AC97_EXTENDED_STATUS 0x2a /* Extended Audio Status and Control */ -#define AC97_PCM_FRONT_DAC_RATE 0x2c /* PCM Front DAC Rate */ -#define AC97_PCM_SURR_DAC_RATE 0x2e /* PCM Surround DAC Rate */ -#define AC97_PCM_LFE_DAC_RATE 0x30 /* PCM LFE DAC Rate */ -#define AC97_PCM_LR_ADC_RATE 0x32 /* PCM LR ADC Rate */ -#define AC97_PCM_MIC_ADC_RATE 0x34 /* PCM MIC ADC Rate */ -#define AC97_CENTER_LFE_MASTER 0x36 /* Center + LFE Master Volume */ -#define AC97_SURROUND_MASTER 0x38 /* Surround (Rear) Master Volume */ -#define AC97_SPDIF 0x3a /* S/PDIF control */ -/* range 0x3c-0x58 - MODEM */ -#define AC97_EXTENDED_MID 0x3c /* Extended Modem ID */ -#define AC97_EXTENDED_MSTATUS 0x3e /* Extended Modem Status and Control */ -#define AC97_LINE1_RATE 0x40 /* Line1 DAC/ADC Rate */ -#define AC97_LINE2_RATE 0x42 /* Line2 DAC/ADC Rate */ -#define AC97_HANDSET_RATE 0x44 /* Handset DAC/ADC Rate */ -#define AC97_LINE1_LEVEL 0x46 /* Line1 DAC/ADC Level */ -#define AC97_LINE2_LEVEL 0x48 /* Line2 DAC/ADC Level */ -#define AC97_HANDSET_LEVEL 0x4a /* Handset DAC/ADC Level */ -#define AC97_GPIO_CFG 0x4c /* GPIO Configuration */ -#define AC97_GPIO_POLARITY 0x4e /* GPIO Pin Polarity/Type, 0=low, 1=high active */ -#define AC97_GPIO_STICKY 0x50 /* GPIO Pin Sticky, 0=not, 1=sticky */ -#define AC97_GPIO_WAKEUP 0x52 /* GPIO Pin Wakeup, 0=no int, 1=yes int */ -#define AC97_GPIO_STATUS 0x54 /* GPIO Pin Status, slot 12 */ -#define AC97_MISC_AFE 0x56 /* Miscellaneous Modem AFE Status and Control */ -/* range 0x5a-0x7b - Vendor Specific */ -#define AC97_VENDOR_ID1 0x7c /* Vendor ID1 */ -#define AC97_VENDOR_ID2 0x7e /* Vendor ID2 / revision */ -/* range 0x60-0x6f (page 1) - extended codec registers */ -#define AC97_CODEC_CLASS_REV 0x60 /* Codec Class/Revision */ -#define AC97_PCI_SVID 0x62 /* PCI Subsystem Vendor ID */ -#define AC97_PCI_SID 0x64 /* PCI Subsystem ID */ -#define AC97_FUNC_SELECT 0x66 /* Function Select */ -#define AC97_FUNC_INFO 0x68 /* Function Information */ -#define AC97_SENSE_INFO 0x6a /* Sense Details */ - -/* volume controls */ -#define AC97_MUTE_MASK_MONO 0x8000 -#define AC97_MUTE_MASK_STEREO 0x8080 - -/* slot allocation */ -#define AC97_SLOT_TAG 0 -#define AC97_SLOT_CMD_ADDR 1 -#define AC97_SLOT_CMD_DATA 2 -#define AC97_SLOT_PCM_LEFT 3 -#define AC97_SLOT_PCM_RIGHT 4 -#define AC97_SLOT_MODEM_LINE1 5 -#define AC97_SLOT_PCM_CENTER 6 -#define AC97_SLOT_MIC 6 /* input */ -#define AC97_SLOT_SPDIF_LEFT1 6 -#define AC97_SLOT_PCM_SLEFT 7 /* surround left */ -#define AC97_SLOT_PCM_LEFT_0 7 /* double rate operation */ -#define AC97_SLOT_SPDIF_LEFT 7 -#define AC97_SLOT_PCM_SRIGHT 8 /* surround right */ -#define AC97_SLOT_PCM_RIGHT_0 8 /* double rate operation */ -#define AC97_SLOT_SPDIF_RIGHT 8 -#define AC97_SLOT_LFE 9 -#define AC97_SLOT_SPDIF_RIGHT1 9 -#define AC97_SLOT_MODEM_LINE2 10 -#define AC97_SLOT_PCM_LEFT_1 10 /* double rate operation */ -#define AC97_SLOT_SPDIF_LEFT2 10 -#define AC97_SLOT_HANDSET 11 /* output */ -#define AC97_SLOT_PCM_RIGHT_1 11 /* double rate operation */ -#define AC97_SLOT_SPDIF_RIGHT2 11 -#define AC97_SLOT_MODEM_GPIO 12 /* modem GPIO */ -#define AC97_SLOT_PCM_CENTER_1 12 /* double rate operation */ - -/* basic capabilities (reset register) */ -#define AC97_BC_DEDICATED_MIC 0x0001 /* Dedicated Mic PCM In Channel */ -#define AC97_BC_RESERVED1 0x0002 /* Reserved (was Modem Line Codec support) */ -#define AC97_BC_BASS_TREBLE 0x0004 /* Bass & Treble Control */ -#define AC97_BC_SIM_STEREO 0x0008 /* Simulated stereo */ -#define AC97_BC_HEADPHONE 0x0010 /* Headphone Out Support */ -#define AC97_BC_LOUDNESS 0x0020 /* Loudness (bass boost) Support */ -#define AC97_BC_16BIT_DAC 0x0000 /* 16-bit DAC resolution */ -#define AC97_BC_18BIT_DAC 0x0040 /* 18-bit DAC resolution */ -#define AC97_BC_20BIT_DAC 0x0080 /* 20-bit DAC resolution */ -#define AC97_BC_DAC_MASK 0x00c0 -#define AC97_BC_16BIT_ADC 0x0000 /* 16-bit ADC resolution */ -#define AC97_BC_18BIT_ADC 0x0100 /* 18-bit ADC resolution */ -#define AC97_BC_20BIT_ADC 0x0200 /* 20-bit ADC resolution */ -#define AC97_BC_ADC_MASK 0x0300 -#define AC97_BC_3D_TECH_ID_MASK 0x7c00 /* Per-vendor ID of 3D enhancement */ - -/* general purpose */ -#define AC97_GP_DRSS_MASK 0x0c00 /* double rate slot select */ -#define AC97_GP_DRSS_1011 0x0000 /* LR(C) 10+11(+12) */ -#define AC97_GP_DRSS_78 0x0400 /* LR 7+8 */ - -/* powerdown bits */ -#define AC97_PD_ADC_STATUS 0x0001 /* ADC status (RO) */ -#define AC97_PD_DAC_STATUS 0x0002 /* DAC status (RO) */ -#define AC97_PD_MIXER_STATUS 0x0004 /* Analog mixer status (RO) */ -#define AC97_PD_VREF_STATUS 0x0008 /* Vref status (RO) */ -#define AC97_PD_PR0 0x0100 /* Power down PCM ADCs and input MUX */ -#define AC97_PD_PR1 0x0200 /* Power down PCM front DAC */ -#define AC97_PD_PR2 0x0400 /* Power down Mixer (Vref still on) */ -#define AC97_PD_PR3 0x0800 /* Power down Mixer (Vref off) */ -#define AC97_PD_PR4 0x1000 /* Power down AC-Link */ -#define AC97_PD_PR5 0x2000 /* Disable internal clock usage */ -#define AC97_PD_PR6 0x4000 /* Headphone amplifier */ -#define AC97_PD_EAPD 0x8000 /* External Amplifer Power Down (EAPD) */ - -/* extended audio ID bit defines */ -#define AC97_EI_VRA |