diff options
| author | Ivan T. Ivanov <ivan.ivanov@linaro.org> | 2015-04-09 11:34:33 +0300 |
|---|---|---|
| committer | Felipe Balbi <balbi@ti.com> | 2015-04-28 11:49:15 -0500 |
| commit | 44e42ae3a398b559c768b9b3c324d72b0b0b4479 (patch) | |
| tree | 807a641fd57e3624e0b01fdb86b8968e8193df33 /include | |
| parent | 591fc116f3302da915bb57d4474a61a5e8884cec (diff) | |
usb: phy: msm: Manual PHY and LINK controller VBUS change notification
VBUS is not routed to USB PHY on recent Qualcomm platforms. USB controller
must see VBUS in order to pull-up DP when setting RS bit. Henc configure
USB PHY and LINK registers sense VBUS and enable manual pullup on D+ line.
Cc: Vamsi Krishna <vskrishn@codeaurora.org>
Cc: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/usb/msm_hsusb.h | 5 | ||||
| -rw-r--r-- | include/linux/usb/msm_hsusb_hw.h | 9 |
2 files changed, 14 insertions, 0 deletions
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index c4d956e50d09..e55a1504266e 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -150,6 +150,9 @@ struct msm_usb_cable { * @chg_type: The type of charger attached. * @dcd_retires: The retry count used to track Data contact * detection process. + * @manual_pullup: true if VBUS is not routed to USB controller/phy + * and controller driver therefore enables pull-up explicitly before + * starting controller using usbcmd run/stop bit. * @vbus: VBUS signal state trakining, using extcon framework * @id: ID signal state trakining, using extcon framework */ @@ -181,6 +184,8 @@ struct msm_otg { struct reset_control *link_rst; int vdd_levels[3]; + bool manual_pullup; + struct msm_usb_cable vbus; struct msm_usb_cable id; }; diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index a29f6030afb1..e159b39f67a2 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -21,6 +21,8 @@ #define USB_AHBBURST (MSM_USB_BASE + 0x0090) #define USB_AHBMODE (MSM_USB_BASE + 0x0098) +#define USB_GENCONFIG_2 (MSM_USB_BASE + 0x00a0) + #define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */ #define USB_USBCMD (MSM_USB_BASE + 0x0140) @@ -30,6 +32,9 @@ #define USB_PHY_CTRL (MSM_USB_BASE + 0x0240) #define USB_PHY_CTRL2 (MSM_USB_BASE + 0x0278) +#define GENCONFIG_2_SESS_VLD_CTRL_EN BIT(7) +#define USBCMD_SESS_VLD_CTRL BIT(25) + #define USBCMD_RESET 2 #define USB_USBINTR (MSM_USB_BASE + 0x0148) @@ -50,6 +55,10 @@ #define ULPI_PWR_CLK_MNG_REG 0x88 #define OTG_COMP_DISABLE BIT(0) +#define ULPI_MISC_A 0x96 +#define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1) +#define ULPI_MISC_A_VBUSVLDEXT BIT(0) + #define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */ #define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */ #define PHY_RETEN (1 << 1) /* PHY retention enable/disable */ |