Merge tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for v4.11.

  Nothing too major, the tinydrm and mmu-less support should make
  writing smaller drivers easier for some of the simpler platforms, and
  there are a bunch of documentation updates.

  Intel grew displayport MST audio support which is hopefully useful to
  people, and FBC is on by default for GEN9+ (so people know where to
  look for regressions). AMDGPU has a lot of fixes that would like new
  firmware files installed for some GPUs.

  Other than that it's pretty scattered all over.

  I may have a follow up pull request as I know BenH has a bunch of AST
  rework and fixes and I'd like to get those in once they've been tested
  by AST, and I've got at least one pull request I'm just trying to get
  the author to fix up.

  Core:
   - drm_mm reworked
   - Connector list locking and iterators
   - Documentation updates
   - Format handling rework
   - MMU-less support for fbdev helpers
   - drm_crtc_from_index helper
   - Core CRC API
   - Remove drm_framebuffer_unregister_private
   - Debugfs cleanup
   - EDID/Infoframe fixes
   - Release callback
   - Tinydrm support (smaller drivers for simple hw)

  panel:
   - Add support for some new simple panels

  i915:
   - FBC by default for gen9+
   - Shared dpll cleanups and docs
   - GEN8 powerdomain cleanup
   - DMC support on GLK
   - DP MST audio support
   - HuC loading support
   - GVT init ordering fixes
   - GVT IOMMU workaround fix

  amdgpu/radeon:
   - Power/clockgating improvements
   - Preliminary SR-IOV support
   - TTM buffer priority and eviction fixes
   - SI DPM quirks removed due to firmware fixes
   - Powerplay improvements
   - VCE/UVD powergating fixes
   - Cleanup SI GFX code to match CI/VI
   - Support for > 2 displays on 3/5 crtc asics
   - SI headless fixes

  nouveau:
   - Rework securre boot code in prep for GP10x secure boot
   - Channel recovery improvements
   - Initial power budget code
   - MMU rework preperation

  vmwgfx:
   - Bunch of fixes and cleanups

  exynos:
   - Runtime PM support for MIC driver
   - Cleanups to use atomic helpers
   - UHD Support for TM2/TM2E boards
   - Trigger mode fix for Rinato board

  etnaviv:
   - Shader performance fix
   - Command stream validator fixes
   - Command buffer suballocator

  rockchip:
   - CDN DisplayPort support
   - IOMMU support for arm64 platform

  imx-drm:
   - Fix i.MX5 TV encoder probing
   - Remove lower fb size limits

  msm:
   - Support for HW cursor on MDP5 devices
   - DSI encoder cleanup
   - GPU DT bindings cleanup

  sti:
   - stih410 cleanups
   - Create fbdev at binding
   - HQVDP fixes
   - Remove stih416 chip functionality
   - DVI/HDMI mode selection fixes
   - FPS statistic reporting

  omapdrm:
   - IRQ code cleanup

  dwi-hdmi bridge:
   - Cleanups and fixes

  adv-bridge:
   - Updates for nexus

  sii8520 bridge:
   - Add interlace mode support
   - Rework HDMI and lots of fixes

  qxl:
   - probing/teardown cleanups

  ZTE drm:
   - HDMI audio via SPDIF interface
   - Video Layer overlay plane support
   - Add TV encoder output device

  atmel-hlcdc:
   - Rework fbdev creation logic

  tegra:
   - OF node fix

  fsl-dcu:
   - Minor fixes

  mali-dp:
   - Assorted fixes

  sunxi:
   - Minor fix"

[ This was the "fixed" pull, that still had build warnings due to people
  not even having build tested the result. I'm not a happy camper

  I've fixed the things I noticed up in this merge.      - Linus ]

* tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits)
  lib/Kconfig: make PRIME_NUMBERS not user selectable
  drm/tinydrm: helpers: Properly fix backlight dependency
  drm/tinydrm: mipi-dbi: Fix field width specifier warning
  drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized
  drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files
  drm/amd/powerplay: fix PSI feature on Polars12
  drm/amdgpu: refuse to reserve io mem for split VRAM buffers
  drm/ttm: fix use-after-free races in vm fault handling
  drm/tinydrm: Add support for Multi-Inno MI0283QT display
  dt-bindings: Add Multi-Inno MI0283QT binding
  dt-bindings: display/panel: Add common rotation property
  of: Add vendor prefix for Multi-Inno
  drm/tinydrm: Add MIPI DBI support
  drm/tinydrm: Add helper functions
  drm: Add DRM support for tiny LCD displays
  drm/amd/amdgpu: post card if there is real hw resetting performed
  drm/nouveau/tmr: provide backtrace when a timeout is hit
  drm/nouveau/pci/g92: Fix rearm
  drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios
  drm/nouveau/hwmon: expose power_max and power_crit
  ..

45 files changed, 1321 insertions, 552 deletions

diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index bae79f3c4d28..b080a171a23f 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -27,6 +27,16 @@ enum dw_hdmi_devtype {
 	RK3288_HDMI,
 };
 
+enum dw_hdmi_phy_type {
+	DW_HDMI_PHY_DWC_HDMI_TX_PHY = 0x00,
+	DW_HDMI_PHY_DWC_MHL_PHY_HEAC = 0xb2,
+	DW_HDMI_PHY_DWC_MHL_PHY = 0xc2,
+	DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY_HEAC = 0xe2,
+	DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY = 0xf2,
+	DW_HDMI_PHY_DWC_HDMI20_TX_PHY = 0xf3,
+	DW_HDMI_PHY_VENDOR_PHY = 0xfe,
+};
+
 struct dw_hdmi_mpll_config {
 	unsigned long mpixelclock;
 	struct {
@@ -56,10 +66,11 @@ struct dw_hdmi_plat_data {
 					   struct drm_display_mode *mode);
 };
 
-void dw_hdmi_unbind(struct device *dev, struct device *master, void *data);
-int dw_hdmi_bind(struct device *dev, struct device *master,
-		 void *data, struct drm_encoder *encoder,
-		 struct resource *iores, int irq,
+int dw_hdmi_probe(struct platform_device *pdev,
+		  const struct dw_hdmi_plat_data *plat_data);
+void dw_hdmi_remove(struct platform_device *pdev);
+void dw_hdmi_unbind(struct device *dev);
+int dw_hdmi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
 		 const struct dw_hdmi_plat_data *plat_data);
 
 void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate);
diff --git a/include/drm/bridge/mhl.h b/include/drm/bridge/mhl.h
index 3629b2734db6..fbdfc8d7f3c7 100644
--- a/include/drm/bridge/mhl.h
+++ b/include/drm/bridge/mhl.h
@@ -15,6 +15,8 @@
 #ifndef __MHL_H__
 #define __MHL_H__
 
+#include <linux/types.h>
+
 /* Device Capabilities Registers */
 enum {
 	MHL_DCAP_DEV_STATE,
@@ -288,4 +290,87 @@ enum {
 /* Unsupported/unrecognized key code */
 #define MHL_UCPE_STATUS_INEFFECTIVE_KEY_CODE	0x01
 
+enum mhl_burst_id {
+	MHL_BURST_ID_3D_VIC = 0x10,
+	MHL_BURST_ID_3D_DTD = 0x11,
+	MHL_BURST_ID_HEV_VIC = 0x20,
+	MHL_BURST_ID_HEV_DTDA = 0x21,
+	MHL_BURST_ID_HEV_DTDB = 0x22,
+	MHL_BURST_ID_VC_ASSIGN = 0x38,
+	MHL_BURST_ID_VC_CONFIRM = 0x39,
+	MHL_BURST_ID_AUD_DELAY = 0x40,
+	MHL_BURST_ID_ADT_BURSTID = 0x41,
+	MHL_BURST_ID_BIST_SETUP = 0x51,
+	MHL_BURST_ID_BIST_RETURN_STAT = 0x52,
+	MHL_BURST_ID_EMSC_SUPPORT = 0x61,
+	MHL_BURST_ID_HID_PAYLOAD = 0x62,
+	MHL_BURST_ID_BLK_RCV_BUFFER_INFO = 0x63,
+	MHL_BURST_ID_BITS_PER_PIXEL_FMT = 0x64,
+};
+
+struct mhl_burst_blk_rcv_buffer_info {
+	__be16 id;
+	__le16 size;
+} __packed;
+
+struct mhl3_burst_header {
+	__be16 id;
+	u8 checksum;
+	u8 total_entries;
+	u8 sequence_index;
+} __packed;
+
+struct mhl_burst_bits_per_pixel_fmt {
+	struct mhl3_burst_header hdr;
+	u8 num_entries;
+	struct {
+		u8 stream_id;
+		u8 pixel_format;
+	} __packed desc[0];
+} __packed;
+
+struct mhl_burst_emsc_support {
+	struct mhl3_burst_header hdr;
+	u8 num_entries;
+	__be16 burst_id[0];
+} __packed;
+
+struct mhl_burst_audio_descr {
+	struct mhl3_burst_header hdr;
+	u8 flags;
+	u8 short_desc[9];
+} __packed;
+
+/*
+ * MHL3 infoframe related definitions
+ */
+
+#define MHL3_IEEE_OUI		0x7ca61d
+#define MHL3_INFOFRAME_SIZE	15
+
+enum mhl3_video_format {
+	MHL3_VIDEO_FORMAT_NONE,
+	MHL3_VIDEO_FORMAT_3D,
+	MHL3_VIDEO_FORMAT_MULTI_VIEW,
+	MHL3_VIDEO_FORMAT_DUAL_3D
+};
+
+enum mhl3_3d_format_type {
+	MHL3_3D_FORMAT_TYPE_FS, /* frame sequential */
+	MHL3_3D_FORMAT_TYPE_TB, /* top-bottom */
+	MHL3_3D_FORMAT_TYPE_LR, /* left-right */
+	MHL3_3D_FORMAT_TYPE_FS_TB, /* frame sequential, top-bottom */
+	MHL3_3D_FORMAT_TYPE_FS_LR, /* frame sequential, left-right */
+	MHL3_3D_FORMAT_TYPE_TB_LR /* top-bottom, left-right */
+};
+
+struct mhl3_infoframe {
+	unsigned char version;
+	enum mhl3_video_format video_format;
+	enum mhl3_3d_format_type format_type;
+	bool sep_audio;
+	int hev_format;
+	int av_delay;
+};
+
 #endif /* __MHL_H__ */
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 9c4ee144b5f6..6105c050d7bc 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -360,6 +360,7 @@ struct drm_ioctl_desc {
 /* Event queued up for userspace to read */
 struct drm_pending_event {
 	struct completion *completion;
+	void (*completion_release)(struct completion *completion);
 	struct drm_event *event;
 	struct dma_fence *fence;
 	struct list_head link;
@@ -635,6 +636,19 @@ struct drm_device {
 	int switch_power_state;
 };
 
+/**
+ * drm_drv_uses_atomic_modeset - check if the driver implements
+ * atomic_commit()
+ * @dev: DRM device
+ *
+ * This check is useful if drivers do not have DRIVER_ATOMIC set but
+ * have atomic modesetting internally implemented.
+ */
+static inline bool drm_drv_uses_atomic_modeset(struct drm_device *dev)
+{
+	return dev->mode_config.funcs->atomic_commit != NULL;
+}
+
 #include <drm/drm_irq.h>
 
 #define DRM_SWITCH_POWER_ON 0
@@ -718,11 +732,6 @@ int drm_noop(struct drm_device *dev, void *data,
 int drm_invalid_op(struct drm_device *dev, void *data,
 		   struct drm_file *file_priv);
 
-/* Cache management (drm_cache.c) */
-void drm_clflush_pages(struct page *pages[], unsigned long num_pages);
-void drm_clflush_sg(struct sg_table *st);
-void drm_clflush_virt_range(void *addr, unsigned long length);
-
 /*
  * These are exported to drivers so that they can implement fencing using
  * DMA quiscent + idle. DMA quiescent usually requires the hardware lock.
@@ -782,21 +791,6 @@ extern void drm_sysfs_hotplug_event(struct drm_device *dev);
 
 /*@}*/
 
-/* PCI section */
-static __inline__ int drm_pci_device_is_agp(struct drm_device *dev)
-{
-	if (dev->driver->device_is_agp != NULL) {
-		int err = (*dev->driver->device_is_agp) (dev);
-
-		if (err != 2) {
-			return err;
-		}
-	}
-
-	return pci_find_capability(dev->pdev, PCI_CAP_ID_AGP);
-}
-void drm_pci_agp_destroy(struct drm_device *dev);
-
 extern int drm_pci_init(struct drm_driver *driver, struct pci_driver *pdriver);
 extern void drm_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver);
 #ifdef CONFIG_PCI
diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
index 56814e8ae7ea..052ab161b239 100644
--- a/include/drm/drm_atomic.h
+++ b/include/drm/drm_atomic.h
@@ -123,7 +123,8 @@ struct drm_crtc_commit {
 	/**
 	 * @commit_entry:
 	 *
-	 * Entry on the per-CRTC commit_list. Protected by crtc->commit_lock.
+	 * Entry on the per-CRTC &drm_crtc.commit_list. Protected by
+	 * $drm_crtc.commit_lock.
 	 */
 	struct list_head commit_entry;
 
@@ -145,6 +146,7 @@ struct __drm_crtcs_state {
 	struct drm_crtc_state *state;
 	struct drm_crtc_commit *commit;
 	s32 __user *out_fence_ptr;
+	unsigned last_vblank_count;
 };
 
 struct __drm_connnectors_state {
@@ -188,12 +190,31 @@ struct drm_atomic_state {
 	struct work_struct commit_work;
 };
 
-void drm_crtc_commit_put(struct drm_crtc_commit *commit);
+void __drm_crtc_commit_free(struct kref *kref);
+
+/**
+ * drm_crtc_commit_get - acquire a reference to the CRTC commit
+ * @commit: CRTC commit
+ *
+ * Increases the reference of @commit.
+ */
 static inline void drm_crtc_commit_get(struct drm_crtc_commit *commit)
 {
 	kref_get(&commit->ref);
 }
 
+/**
+ * drm_crtc_commit_put - release a reference to the CRTC commmit
+ * @commit: CRTC commit
+ *
+ * This releases a reference to @commit which is freed after removing the
+ * final reference. No locking required and callable from any context.
+ */
+static inline void drm_crtc_commit_put(struct drm_crtc_commit *commit)
+{
+	kref_put(&commit->ref, __drm_crtc_commit_free);
+}
+
 struct drm_atomic_state * __must_check
 drm_atomic_state_alloc(struct drm_device *dev);
 void drm_atomic_state_clear(struct drm_atomic_state *state);
@@ -369,12 +390,6 @@ int __must_check drm_atomic_nonblocking_commit(struct drm_atomic_state *state);
 
 void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
 
-#ifdef CONFIG_DEBUG_FS
-struct drm_minor;
-int drm_atomic_debugfs_init(struct drm_minor *minor);
-int drm_atomic_debugfs_cleanup(struct drm_minor *minor);
-#endif
-
 #define for_each_connector_in_state(__state, connector, connector_state, __i) \
 	for ((__i) = 0;							\
 	     (__i) < (__state)->num_connector &&				\
@@ -403,7 +418,7 @@ int drm_atomic_debugfs_cleanup(struct drm_minor *minor);
  * drm_atomic_crtc_needs_modeset - compute combined modeset need
  * @state: &drm_crtc_state for the CRTC
  *
- * To give drivers flexibility struct &drm_crtc_state has 3 booleans to track
+ * To give drivers flexibility &struct drm_crtc_state has 3 booleans to track
  * whether the state CRTC changed enough to need a full modeset cycle:
  * connectors_changed, mode_changed and active_changed. This helper simply
  * combines these three to compute the overall need for a modeset for @state.
@@ -415,7 +430,8 @@ int drm_atomic_debugfs_cleanup(struct drm_minor *minor);
  *
  * For example if the CRTC mode has changed, and the hardware is able to enact
  * the requested mode change without going through a full modeset, the driver
- * should clear mode_changed during its ->atomic_check.
+ * should clear mode_changed in its &drm_mode_config_funcs.atomic_check
+ * implementation.
  */
 static inline bool
 drm_atomic_crtc_needs_modeset(const struct drm_crtc_state *state)
@@ -424,5 +440,4 @@ drm_atomic_crtc_needs_modeset(const struct drm_crtc_state *state)
 	       state->connectors_changed;
 }
 
-
 #endif /* DRM_ATOMIC_H_ */
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
index 7ff92b09fd9c..d066e9491ae3 100644
--- a/include/drm/drm_atomic_helper.h
+++ b/include/drm/drm_atomic_helper.h
@@ -48,9 +48,6 @@ int drm_atomic_helper_commit(struct drm_device *dev,
 int drm_atomic_helper_wait_for_fences(struct drm_device *dev,
 					struct drm_atomic_state *state,
 					bool pre_swap);
-bool drm_atomic_helper_framebuffer_changed(struct drm_device *dev,
-					   struct drm_atomic_state *old_state,
-					   struct drm_crtc *crtc);
 
 void drm_atomic_helper_wait_for_vblanks(struct drm_device *dev,
 					struct drm_atomic_state *old_state);
@@ -124,6 +121,12 @@ int drm_atomic_helper_page_flip(struct drm_crtc *crtc,
 				struct drm_framebuffer *fb,
 				struct drm_pending_vblank_event *event,
 				uint32_t flags);
+int drm_atomic_helper_page_flip_target(
+				struct drm_crtc *crtc,
+				struct drm_framebuffer *fb,
+				struct drm_pending_vblank_event *event,
+				uint32_t flags,
+				uint32_t target);
 int drm_atomic_helper_connector_dpms(struct drm_connector *connector,
 				     int mode);
 struct drm_encoder *
@@ -174,7 +177,8 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  *
  * This iterates over the current state, useful (for example) when applying
  * atomic state after it has been checked and swapped.  To iterate over the
- * planes which *will* be attached (for ->atomic_check()) see
+ * planes which *will* be attached (more useful in code called from
+ * &drm_mode_config_funcs.atomic_check) see
  * drm_atomic_crtc_state_for_each_plane().
  */
 #define drm_atomic_crtc_for_each_plane(plane, crtc) \
@@ -186,8 +190,9 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  * @crtc_state: the incoming crtc-state
  *
  * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be
- * attached if the specified state is applied.  Useful during (for example)
- * ->atomic_check() operations, to validate the incoming state.
+ * attached if the specified state is applied.  Useful during for example
+ * in code called from &drm_mode_config_funcs.atomic_check operations, to
+ * validate the incoming state.
  */
 #define drm_atomic_crtc_state_for_each_plane(plane, crtc_state) \
 	drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask)
@@ -199,8 +204,9 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  * @crtc_state: the incoming crtc-state
  *
  * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be
- * attached if the specified state is applied.  Useful during (for example)
- * ->atomic_check() operations, to validate the incoming state.
+ * attached if the specified state is applied.  Useful during for example
+ * in code called from &drm_mode_config_funcs.atomic_check operations, to
+ * validate the incoming state.
  *
  * Compared to just drm_atomic_crtc_state_for_each_plane() this also fills in a
  * const plane_state. This is useful when a driver just wants to peek at other
diff --git a/include/drm/drm_auth.h b/include/drm/drm_auth.h
index 610223b0481b..1eb4a52cad8d 100644
--- a/include/drm/drm_auth.h
+++ b/include/drm/drm_auth.h
@@ -33,10 +33,7 @@
  *
  * @refcount: Refcount for this master object.
  * @dev: Link back to the DRM device
- * @unique: Unique identifier: e.g. busid. Protected by drm_global_mutex.
- * @unique_len: Length of unique field. Protected by drm_global_mutex.
- * @magic_map: Map of used authentication tokens. Protected by struct_mutex.
- * @lock: DRI lock information.
+ * @lock: DRI1 lock information.
  * @driver_priv: Pointer to driver-private information.
  *
  * Note that master structures are only relevant for the legacy/primary device
@@ -45,8 +42,20 @@
 struct drm_master {
 	struct kref refcount;
 	struct drm_device *dev;
+	/**
+	 * @unique: Unique identifier: e.g. busid. Protected by
+	 * &drm_device.master_mutex.
+	 */
 	char *unique;
+	/**
+	 * @unique_len: Length of unique field. Protected by
+	 * &drm_device.master_mutex.
+	 */
 	int unique_len;
+	/**
+	 * @magic_map: Map of used authentication tokens. Protected by
+	 * &drm_device.master_mutex.
+	 */
 	struct idr magic_map;
 	struct drm_lock_data lock;
 	void *driver_priv;
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index 530a1d6e8cde..fdd82fcbf168 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -96,9 +96,10 @@ struct drm_bridge_funcs {
 	 * This callback should disable the bridge. It is called right before
 	 * the preceding element in the display pipe is disabled. If the
 	 * preceding element is a bridge this means it's called before that
-	 * bridge's ->disable() function. If the preceding element is a
-	 * &drm_encoder it's called right before the encoder's ->disable(),
-	 * ->prepare() or ->dpms() hook from struct &drm_encoder_helper_funcs.
+	 * bridge's @disable vfunc. If the preceding element is a &drm_encoder
+	 * it's called right before the &drm_encoder_helper_funcs.disable,
+	 * &drm_encoder_helper_funcs.prepare or &drm_encoder_helper_funcs.dpms
+	 * hook.
 	 *
 	 * The bridge can assume that the display pipe (i.e. clocks and timing
 	 * signals) feeding it is still running when this callback is called.
@@ -110,12 +111,13 @@ struct drm_bridge_funcs {
 	/**
 	 * @post_disable:
 	 *
-	 * This callback should disable the bridge. It is called right after
-	 * the preceding element in the display pipe is disabled. If the
-	 * preceding element is a bridge this means it's called after that
-	 * bridge's ->post_disable() function. If the preceding element is a
-	 * &drm_encoder it's called right after the encoder's ->disable(),
-	 * ->prepare() or ->dpms() hook from struct &drm_encoder_helper_funcs.
+	 * This callback should disable the bridge. It is called right after the
+	 * preceding element in the display pipe is disabled. If the preceding
+	 * element is a bridge this means it's called after that bridge's
+	 * @post_disable function. If the preceding element is a &drm_encoder
+	 * it's called right after the encoder's
+	 * &drm_encoder_helper_funcs.disable, &drm_encoder_helper_funcs.prepare
+	 * or &drm_encoder_helper_funcs.dpms hook.
 	 *
 	 * The bridge must assume that the display pipe (i.e. clocks and timing
 	 * singals) feeding it is no longer running when this callback is
@@ -129,9 +131,11 @@ struct drm_bridge_funcs {
 	 * @mode_set:
 	 *
 	 * This callback should set the given mode on the bridge. It is called
-	 * after the ->mode_set() callback for the preceding element in the
-	 * display pipeline has been called already. The display pipe (i.e.
-	 * clocks and timing signals) is off when this function is called.
+	 * after the @mode_set callback for the preceding element in the display
+	 * pipeline has been called already. If the bridge is the first element
+	 * then this would be &drm_encoder_helper_funcs.mode_set. The display
+	 * pipe (i.e.  clocks and timing signals) is off when this function is
+	 * called.
 	 */
 	void (*mode_set)(struct drm_bridge *bridge,
 			 struct drm_display_mode *mode,
@@ -142,9 +146,10 @@ struct drm_bridge_funcs {
 	 * This callback should enable the bridge. It is called right before
 	 * the preceding element in the display pipe is enabled. If the
 	 * preceding element is a bridge this means it's called before that
-	 * bridge's ->pre_enable() function. If the preceding element is a
-	 * &drm_encoder it's called right before the encoder's ->enable(),
-	 * ->commit() or ->dpms() hook from struct &drm_encoder_helper_funcs.
+	 * bridge's @pre_enable function. If the preceding element is a
+	 * &drm_encoder it's called right before the encoder's
+	 * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
+	 * &drm_encoder_helper_funcs.dpms hook.
 	 *
 	 * The display pipe (i.e. clocks and timing signals) feeding this bridge
 	 * will not yet be running when this callback is called. The bridge must
@@ -161,9 +166,10 @@ struct drm_bridge_funcs {
 	 * This callback should enable the bridge. It is called right after
 	 * the preceding element in the display pipe is enabled. If the
 	 * preceding element is a bridge this means it's called after that
-	 * bridge's ->enable() function. If the preceding element is a
-	 * &drm_encoder it's called right after the encoder's ->enable(),
-	 * ->commit() or ->dpms() hook from struct &drm_encoder_helper_funcs.
+	 * bridge's @enable function. If the preceding element is a
+	 * &drm_encoder it's called right after the encoder's
+	 * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
+	 * &drm_encoder_helper_funcs.dpms hook.
 	 *
 	 * The bridge can assume that the display pipe (i.e. clocks and timing
 	 * signals) feeding it is running when this callback is called. This
@@ -201,8 +207,8 @@ struct drm_bridge {
 int drm_bridge_add(struct drm_bridge *bridge);
 void drm_bridge_remove(struct drm_bridge *bridge);
 struct drm_bridge *of_drm_find_bridge(struct device_node *np);
-int drm_bridge_attach(struct drm_device *dev, struct drm_bridge *bridge);
-void drm_bridge_detach(struct drm_bridge *bridge);
+int drm_bridge_attach(struct drm_encoder *encoder, struct drm_bridge *bridge,
+		      struct drm_bridge *previous);
 
 bool drm_bridge_mode_fixup(struct drm_bridge *bridge,
 			const struct drm_display_mode *mode,
diff --git a/include/drm/drm_cache.h b/include/drm/drm_cache.h
index cebecff536a3..beab0f0d0cfb 100644
--- a/include/drm/drm_cache.h
+++ b/include/drm/drm_cache.h
@@ -33,7 +33,11 @@
 #ifndef _DRM_CACHE_H_
 #define _DRM_CACHE_H_
 
+#include <linux/scatterlist.h>
+
 void drm_clflush_pages(struct page *pages[], unsigned long num_pages);
+void drm_clflush_sg(struct sg_table *st);
+void drm_clflush_virt_range(void *addr, unsigned long length);
 
 static inline bool drm_arch_can_wc_memory(void)
 {
diff --git a/include/drm/drm_color_mgmt.h b/include/drm/drm_color_mgmt.h
index c767238ac9d5..bce4a532836d 100644
--- a/include/drm/drm_color_mgmt.h
+++ b/include/drm/drm_color_mgmt.h
@@ -25,6 +25,8 @@
 
 #include <linux/ctype.h>
 
+uint32_t drm_color_lut_extract(uint32_t user_input, uint32_t bit_precision);
+
 void drm_crtc_enable_color_mgmt(struct drm_crtc *crtc,
 				uint degamma_lut_size,
 				bool has_ctm,
@@ -33,29 +35,4 @@ void drm_crtc_enable_color_mgmt(struct drm_crtc *crtc,
 int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
 				 int gamma_size);
 
-/**
- * drm_color_lut_extract - clamp&round LUT entries
- * @user_input: input value
- * @bit_precision: number of bits the hw LUT supports
- *
- * Extract a degamma/gamma LUT value provided by user (in the form of
- * &drm_color_lut entries) and round it to the precision supported by the
- * hardware.
- */
-static inline uint32_t drm_color_lut_extract(uint32_t user_input,
-					     uint32_t bit_precision)
-{
-	uint32_t val = user_input;
-	uint32_t max = 0xffff >> (16 - bit_precision);
-
-	/* Round only if we're not using full precision. */
-	if (bit_precision < 16) {
-		val += 1UL << (16 - bit_precision - 1);
-		val >>= 16 - bit_precision;
-	}
-
-	return clamp_val(val, 0, max);
-}
-
-
 #endif
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 045a97cbeba2..e5e1eddd19fb 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -94,7 +94,7 @@ enum subpixel_order {
  *
  * Describes a given display (e.g. CRT or flat panel) and its limitations. For
  * fixed display sinks like built-in panels there's not much difference between
- * this and struct &drm_connector. But for sinks with a real cable this
+ * this and &struct drm_connector. But for sinks with a real cable this
  * structure is meant to describe all the things at the other end of the cable.
  *
  * For sinks which provide an EDID this can be filled out by calling
@@ -117,7 +117,7 @@ struct drm_display_info {
 
 	/**
 	 * @pixel_clock: Maximum pixel clock supported by the sink, in units of
-	 * 100Hz. This mismatches the clok in &drm_display_mode (which is in
+	 * 100Hz. This mismatches the clock in &drm_display_mode (which is in
 	 * kHZ), because that's what the EDID uses as base unit.
 	 */
 	unsigned int pixel_clock;
@@ -331,15 +331,15 @@ struct drm_connector_funcs {
 	 *
 	 * Entry point for output detection and basic mode validation. The
 	 * driver should reprobe the output if needed (e.g. when hotplug
-	 * handling is unreliable), add all detected modes to connector->modes
+	 * handling is