Merge tag 'for-linus-20130909' of git://git.infradead.org/linux-mtd

Pull mtd updates from David Woodhouse:
 - factor out common code from MTD tests
 - nand-gpio cleanup and portability to non-ARM
 - m25p80 support for 4-byte addressing chips, other new chips
 - pxa3xx cleanup and support for new platforms
 - remove obsolete alauda, octagon-5066 drivers
 - erase/write support for bcm47xxsflash
 - improve detection of ECC requirements for NAND, controller setup
 - NFC acceleration support for atmel-nand, read/write via SRAM
 - etc

* tag 'for-linus-20130909' of git://git.infradead.org/linux-mtd: (184 commits)
  mtd: chips: Add support for PMC SPI Flash chips in m25p80.c
  mtd: ofpart: use for_each_child_of_node() macro
  mtd: mtdswap: replace strict_strtoul() with kstrtoul()
  mtd cs553x_nand: use kzalloc() instead of memset
  mtd: atmel_nand: fix error return code in atmel_nand_probe()
  mtd: bcm47xxsflash: writing support
  mtd: bcm47xxsflash: implement erasing support
  mtd: bcm47xxsflash: convert to module_platform_driver instead of init/exit
  mtd: bcm47xxsflash: convert kzalloc to avoid invalid access
  mtd: remove alauda driver
  mtd: nand: mxc_nand: mark 'const' properly
  mtd: maps: cfi_flagadm: add missing __iomem annotation
  mtd: spear_smi: add missing __iomem annotation
  mtd: r852: Staticize local symbols
  mtd: nandsim: Staticize local symbols
  mtd: impa7: add missing __iomem annotation
  mtd: sm_ftl: Staticize local symbols
  mtd: m25p80: add support for mr25h10
  mtd: m25p80: make CONFIG_M25PXX_USE_FAST_READ safe to enable
  mtd: m25p80: Pass flags through CAT25_INFO macro
  ...

85 files changed, 2563 insertions, 3175 deletions

diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/bcm63xxpart.c
index 6eeb84c81bc2..5c813907661c 100644
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
@@ -4,7 +4,7 @@
  * Copyright © 2006-2008  Florian Fainelli <florian@openwrt.org>
  *			  Mike Albon <malbon@openwrt.org>
  * Copyright © 2009-2010  Daniel Dickinson <openwrt@cshore.neomailbox.net>
- * Copyright © 2011-2012  Jonas Gorski <jonas.gorski@gmail.com>
+ * Copyright © 2011-2013  Jonas Gorski <jonas.gorski@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -27,17 +27,19 @@
 #include <linux/crc32.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/sizes.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+#include <asm/mach-bcm63xx/bcm63xx_nvram.h>
 #include <asm/mach-bcm63xx/bcm963xx_tag.h>
 #include <asm/mach-bcm63xx/board_bcm963xx.h>
 
 #define BCM63XX_EXTENDED_SIZE	0xBFC00000	/* Extended flash address */
 
-#define BCM63XX_CFE_BLOCK_SIZE	0x10000		/* always at least 64KiB */
+#define BCM63XX_CFE_BLOCK_SIZE	SZ_64K		/* always at least 64KiB */
 
 #define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
 
@@ -90,7 +92,8 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
 			      BCM63XX_CFE_BLOCK_SIZE);
 
 	cfelen = cfe_erasesize;
-	nvramlen = cfe_erasesize;
+	nvramlen = bcm63xx_nvram_get_psi_size() * SZ_1K;
+	nvramlen = roundup(nvramlen, cfe_erasesize);
 
 	/* Allocate memory for buffer */
 	buf = vmalloc(sizeof(struct bcm_tag));
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index fff665d59a0d..89b9d6891532 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1571,8 +1571,8 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 	xip_enable(map, chip, adr);
 	/* FIXME - should have reset delay before continuing */
 
-	printk(KERN_WARNING "MTD %s(): software timeout\n",
-	       __func__ );
+	printk(KERN_WARNING "MTD %s(): software timeout, address:0x%.8lx.\n",
+	       __func__, adr);
 
 	ret = -EIO;
  op_done:
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index 74dbb6bcf488..ffb36ba8a6e0 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -211,9 +211,7 @@ static inline struct mtd_info *cfi_cmdset_unknown(struct map_info *map,
 
 	probe_function = __symbol_get(probename);
 	if (!probe_function) {
-		char modname[sizeof("cfi_cmdset_%4.4X")];
-		sprintf(modname, "cfi_cmdset_%4.4X", type);
-		request_module(modname);
+		request_module("cfi_cmdset_%4.4X", type);
 		probe_function = __symbol_get(probename);
 	}
 
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index c443f527a53a..7c0b27d132b1 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -120,7 +120,7 @@
 #define PM49FL008	0x006A
 
 /* Sharp */
-#define LH28F640BF	0x00b0
+#define LH28F640BF	0x00B0
 
 /* ST - www.st.com */
 #define M29F800AB	0x0058
@@ -1299,13 +1299,14 @@ static const struct amd_flash_info jedec_table[] = {
 		.mfr_id		= CFI_MFR_SHARP,
 		.dev_id		= LH28F640BF,
 		.name		= "LH28F640BF",
-		.devtypes	= CFI_DEVICETYPE_X8,
+		.devtypes	= CFI_DEVICETYPE_X16,
 		.uaddr		= MTD_UADDR_UNNECESSARY,
-		.dev_size	= SIZE_4MiB,
-		.cmd_set	= P_ID_INTEL_STD,
-		.nr_regions	= 1,
+		.dev_size	= SIZE_8MiB,
+		.cmd_set	= P_ID_INTEL_EXT,
+		.nr_regions	= 2,
 		.regions	= {
-			ERASEINFO(0x40000,16),
+			ERASEINFO(0x10000, 127),
+			ERASEINFO(0x02000, 8),
 		}
 	}, {
 		.mfr_id		= CFI_MFR_SST,
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 2a4d55e4b362..74ab4b7e523e 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -224,59 +224,4 @@ config BCH_CONST_T
 	default 4
 endif
 
-config MTD_DOCPROBE
-	tristate
-	select MTD_DOCECC
-
-config MTD_DOCECC
-	tristate
-
-config MTD_DOCPROBE_ADVANCED
-	bool "Advanced detection options for DiskOnChip"
-	depends on MTD_DOCPROBE
-	help
-	  This option allows you to specify nonstandard address at which to
-	  probe for a DiskOnChip, or to change the detection options.  You
-	  are unlikely to need any of this unless you are using LinuxBIOS.
-	  Say 'N'.
-
-config MTD_DOCPROBE_ADDRESS
-	hex "Physical address of DiskOnChip" if MTD_DOCPROBE_ADVANCED
-	depends on MTD_DOCPROBE
-	default "0x0"
-	---help---
-	  By default, the probe for DiskOnChip devices will look for a
-	  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
-	  This option allows you to specify a single address at which to probe
-	  for the device, which is useful if you have other devices in that
-	  range which get upset when they are probed.
-
-	  (Note that on PowerPC, the normal probe will only check at
-	  0xE4000000.)
-
-	  Normally, you should leave this set to zero, to allow the probe at
-	  the normal addresses.
-
-config MTD_DOCPROBE_HIGH
-	bool "Probe high addresses"
-	depends on MTD_DOCPROBE_ADVANCED
-	help
-	  By default, the probe for DiskOnChip devices will look for a
-	  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
-	  This option changes to make it probe between 0xFFFC8000 and
-	  0xFFFEE000.  Unless you are using LinuxBIOS, this is unlikely to be
-	  useful to you.  Say 'N'.
-
-config MTD_DOCPROBE_55AA
-	bool "Probe for 0x55 0xAA BIOS Extension Signature"
-	depends on MTD_DOCPROBE_ADVANCED
-	help
-	  Check for the 0x55 0xAA signature of a DiskOnChip, and do not
-	  continue with probing if it is absent.  The signature will always be
-	  present for a DiskOnChip 2000 or a normal DiskOnChip Millennium.
-	  Only if you have overwritten the first block of a DiskOnChip
-	  Millennium will it be absent.  Enable this option if you are using
-	  LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
-	  you have managed to wipe the first block.
-
 endmenu
diff --git a/drivers/mtd/devices/bcm47xxsflash.c b/drivers/mtd/devices/bcm47xxsflash.c
index 18e7761137a3..77de29bc02ba 100644
--- a/drivers/mtd/devices/bcm47xxsflash.c
+++ b/drivers/mtd/devices/bcm47xxsflash.c
@@ -1,6 +1,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/platform_device.h>
 #include <linux/bcma/bcma.h>
@@ -12,6 +13,93 @@ MODULE_DESCRIPTION("Serial flash driver for BCMA bus");
 
 static const char * const probes[] = { "bcm47xxpart", NULL };
 
+/**************************************************
+ * Various helpers
+ **************************************************/
+
+static void bcm47xxsflash_cmd(struct bcm47xxsflash *b47s, u32 opcode)
+{
+	int i;
+
+	b47s->cc_write(b47s, BCMA_CC_FLASHCTL, BCMA_CC_FLASHCTL_START | opcode);
+	for (i = 0; i < 1000; i++) {
+		if (!(b47s->cc_read(b47s, BCMA_CC_FLASHCTL) &
+		      BCMA_CC_FLASHCTL_BUSY))
+			return;
+		cpu_relax();
+	}
+	pr_err("Control command failed (timeout)!\n");
+}
+
+static int bcm47xxsflash_poll(struct bcm47xxsflash *b47s, int timeout)
+{
+	unsigned long deadline = jiffies + timeout;
+
+	do {
+		switch (b47s->type) {
+		case BCM47XXSFLASH_TYPE_ST:
+			bcm47xxsflash_cmd(b47s, OPCODE_ST_RDSR);
+			if (!(b47s->cc_read(b47s, BCMA_CC_FLASHDATA) &
+			      SR_ST_WIP))
+				return 0;
+			break;
+		case BCM47XXSFLASH_TYPE_ATMEL:
+			bcm47xxsflash_cmd(b47s, OPCODE_AT_STATUS);
+			if (b47s->cc_read(b47s, BCMA_CC_FLASHDATA) &
+			    SR_AT_READY)
+				return 0;
+			break;
+		}
+
+		cpu_relax();
+		udelay(1);
+	} while (!time_after_eq(jiffies, deadline));
+
+	pr_err("Timeout waiting for flash to be ready!\n");
+
+	return -EBUSY;
+}
+
+/**************************************************
+ * MTD ops
+ **************************************************/
+
+static int bcm47xxsflash_erase(struct mtd_info *mtd, struct erase_info *erase)
+{
+	struct bcm47xxsflash *b47s = mtd->priv;
+	int err;
+
+	switch (b47s->type) {
+	case BCM47XXSFLASH_TYPE_ST:
+		bcm47xxsflash_cmd(b47s, OPCODE_ST_WREN);
+		b47s->cc_write(b47s, BCMA_CC_FLASHADDR, erase->addr);
+		/* Newer flashes have "sub-sectors" which can be erased
+		 * independently with a new command: ST_SSE. The ST_SE command
+		 * erases 64KB just as before.
+		 */
+		if (b47s->blocksize < (64 * 1024))
+			bcm47xxsflash_cmd(b47s, OPCODE_ST_SSE);
+		else
+			bcm47xxsflash_cmd(b47s, OPCODE_ST_SE);
+		break;
+	case BCM47XXSFLASH_TYPE_ATMEL:
+		b47s->cc_write(b47s, BCMA_CC_FLASHADDR, erase->addr << 1);
+		bcm47xxsflash_cmd(b47s, OPCODE_AT_PAGE_ERASE);
+		break;
+	}
+
+	err = bcm47xxsflash_poll(b47s, HZ);
+	if (err)
+		erase->state = MTD_ERASE_FAILED;
+	else
+		erase->state = MTD_ERASE_DONE;
+
+	if (erase->callback)
+		erase->callback(erase);
+
+	return err;
+}
+
 static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 			      size_t *retlen, u_char *buf)
 {
@@ -28,6 +116,127 @@ static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 	return len;
 }
 
+static int bcm47xxsflash_write_st(struct mtd_info *mtd, u32 offset, size_t len,
+				  const u_char *buf)
+{
+	struct bcm47xxsflash *b47s = mtd->priv;
+	int written = 0;
+
+	/* Enable writes */
+	bcm47xxsflash_cmd(b47s, OPCODE_ST_WREN);
+
+	/* Write first byte */
+	b47s->cc_write(b47s, BCMA_CC_FLASHADDR, offset);
+	b47s->cc_write(b47s, BCMA_CC_FLASHDATA, *buf++);
+
+	/* Program page */
+	if (b47s->bcma_cc->core->id.rev < 20) {
+		bcm47xxsflash_cmd(b47s, OPCODE_ST_PP);
+		return 1; /* 1B written */
+	}
+
+	/* Program page and set CSA (on newer chips we can continue writing) */
+	bcm47xxsflash_cmd(b47s, OPCODE_ST_CSA | OPCODE_ST_PP);
+	offset++;
+	len--;
+	written++;
+
+	while (len > 0) {
+		/* Page boundary, another function call is needed */
+		if ((offset & 0xFF) == 0)
+			break;
+
+		bcm47xxsflash_cmd(b47s, OPCODE_ST_CSA | *buf++);
+		offset++;
+		len--;
+		written++;
+	}
+
+	/* All done, drop CSA & poll */
+	b47s->cc_write(b47s, BCMA_CC_FLASHCTL, 0);
+	udelay(1);
+	if (bcm47xxsflash_poll(b47s, HZ / 10))
+		pr_err("Flash rejected dropping CSA\n");
+
+	return written;
+}
+
+static int bcm47xxsflash_write_at(struct mtd_info *mtd, u32 offset, size_t len,
+				  const u_char *buf)
+{
+	struct bcm47xxsflash *b47s = mtd->priv;
+	u32 mask = b47s->blocksize - 1;
+	u32 page = (offset & ~mask) << 1;
+	u32 byte = offset & mask;
+	int written = 0;
+
+	/* If we don't overwrite whole page, read it to the buffer first */
+	if (byte || (len < b47s->blocksize)) {
+		int err;
+
+		b47s->cc_write(b47s, BCMA_CC_FLASHADDR, page);
+		bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_LOAD);
+		/* 250 us for AT45DB321B */
+		err = bcm47xxsflash_poll(b47s, HZ / 1000);
+		if (err) {
+			pr_err("Timeout reading page 0x%X info buffer\n", page);
+			return err;
+		}
+	}
+
+	/* Change buffer content with our data */
+	while (len > 0) {
+		/* Page boundary, another function call is needed */
+		if (byte == b47s->blocksize)
+			break;
+
+		b47s->cc_write(b47s, BCMA_CC_FLASHADDR, byte++);
+		b47s->cc_write(b47s, BCMA_CC_FLASHDATA, *buf++);
+		bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_WRITE);
+		len--;
+		written++;
+	}
+
+	/* Program page with the buffer content */
+	b47s->cc_write(b47s, BCMA_CC_FLASHADDR, page);
+	bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_PROGRAM);
+
+	return written;
+}
+
+static int bcm47xxsflash_write(struct mtd_info *mtd, loff_t to, size_t len,
+			       size_t *retlen, const u_char *buf)
+{
+	struct bcm47xxsflash *b47s = mtd->priv;
+	int written;
+
+	/* Writing functions can return without writing all passed data, for
+	 * example when the hardware is too old or when we git page boundary.
+	 */
+	while (len > 0) {
+		switch (b47s->type) {
+		case BCM47XXSFLASH_TYPE_ST:
+			written = bcm47xxsflash_write_st(mtd, to, len, buf);
+			break;
+		case BCM47XXSFLASH_TYPE_ATMEL:
+			written = bcm47xxsflash_write_at(mtd, to, len, buf);
+			break;
+		default:
+			BUG_ON(1);
+		}
+		if (written < 0) {
+			pr_err("Error writing at offset 0x%llX\n", to);
+			return written;
+		}
+		to += (loff_t)written;
+		len -= written;
+		*retlen += written;
+		buf += written;
+	}