Merge tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "The VL_READ and VL_CLR ioctls have been reworked to be more useful.
  This will not break userspace as there are very few users and they are
  using the integer value as a boolean.

  Apart from that, two drivers were reworked and a few fixes here and
  there for a net reduction of number of lines.

  Summary:

  Subsystem:
   - the VL_READ and VL_CLR ioctls are now documented and their behavior
     is unified across all the drivers.
   - RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
     REGMAP_I2C and REGMAP_SPI unecessarily.

  Drivers:
   - at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
     sama5d2 compatibles.
   - cmos: solve lost interrupts issue on MS Surface 3
   - hym8563: return proper errno when time is invalid
   - rv3029: many fixes, nvram support"

* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
  dt-bindings: rtc: at91rm9200: document clocks property
  rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
  rtc: Kconfig: select REGMAP_I2C when necessary
  rtc: Kconfig: properly indent sd3078 entry
  rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
  rtc: cmos: Use predefined value for RTC IRQ on legacy x86
  rtc: cmos: Stop using shared IRQ
  rtc: tps6586x: Use IRQ_NOAUTOEN flag
  rtc: at91rm9200: use FIELD_PREP/FIELD_GET
  rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
  rtc: at91rm9200: move register definitions to C file
  rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
  dt-bindings: rtc: at91rm9200: convert bindings to json-schema
  rtc: at91rm9200: remove procfs information
  dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
  rtc: pcf8563: Use BIT
  rtc: moxart: Convert to SPDX identifier
  rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
  rtc: rx8025: Remove struct i2c_client from struct rx8025_data
  rtc: hym8563: Read the valid flag directly instead of caching it
  ...

23 files changed, 350 insertions, 540 deletions

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index df7a3843069d..34c8b6c7e095 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -240,6 +240,7 @@ config RTC_DRV_AS3722
 
 config RTC_DRV_DS1307
 	tristate "Dallas/Maxim DS1307/37/38/39/40/41, ST M41T00, EPSON RX-8025, ISL12057"
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for various compatible RTC
 	  chips (often with battery backup) connected with I2C. This driver
@@ -622,6 +623,7 @@ config RTC_DRV_RX8010
 
 config RTC_DRV_RX8581
 	tristate "Epson RX-8571/RX-8581"
+	select REGMAP_I2C
 	help
 	  If you say yes here you will get support for the Epson RX-8571/
 	  RX-8581.
@@ -649,6 +651,7 @@ config RTC_DRV_EM3027
 
 config RTC_DRV_RV3028
 	tristate "Micro Crystal RV3028"
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for the Micro Crystal
 	  RV3028.
@@ -677,13 +680,14 @@ config RTC_DRV_S5M
 	  will be called rtc-s5m.
 
 config RTC_DRV_SD3078
-    tristate "ZXW Shenzhen whwave SD3078"
-    help
-      If you say yes here you get support for the ZXW Shenzhen whwave
-      SD3078 RTC chips.
+	tristate "ZXW Shenzhen whwave SD3078"
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the ZXW Shenzhen whwave
+	  SD3078 RTC chips.
 
-      This driver can also be built as a module. If so, the module
-      will be called rtc-sd3078
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-sd3078
 
 endif # I2C
 
@@ -849,14 +853,14 @@ config RTC_I2C_AND_SPI
 	default m if I2C=m
 	default y if I2C=y
 	default y if SPI_MASTER=y
-	select REGMAP_I2C if I2C
-	select REGMAP_SPI if SPI_MASTER
 
 comment "SPI and I2C RTC drivers"
 
 config RTC_DRV_DS3232
 	tristate "Dallas/Maxim DS3232/DS3234"
 	depends on RTC_I2C_AND_SPI
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
 	help
 	  If you say yes here you get support for Dallas Semiconductor
 	  DS3232 and DS3234 real-time clock chips. If an interrupt is associated
@@ -876,6 +880,8 @@ config RTC_DRV_DS3232_HWMON
 config RTC_DRV_PCF2127
 	tristate "NXP PCF2127"
 	depends on RTC_I2C_AND_SPI
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
 	select WATCHDOG_CORE if WATCHDOG
 	help
 	  If you say yes here you get support for the NXP PCF2127/29 RTC
@@ -892,6 +898,8 @@ config RTC_DRV_PCF2127
 config RTC_DRV_RV3029C2
 	tristate "Micro Crystal RV3029/3049"
 	depends on RTC_I2C_AND_SPI
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
 	help
 	  If you say yes here you get support for the Micro Crystal
 	  RV3029 and RV3049 RTC chips.
diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 73830670a41f..3521d8e8dc38 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -523,12 +523,9 @@ static int abx80x_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 		if (status < 0)
 			return status;
 
-		tmp = !!(status & ABX8XX_STATUS_BLF);
+		tmp = status & ABX8XX_STATUS_BLF ? RTC_VL_BACKUP_LOW : 0;
 
-		if (copy_to_user((void __user *)arg, &tmp, sizeof(int)))
-			return -EFAULT;
-
-		return 0;
+		return put_user(tmp, (unsigned int __user *)arg);
 
 	case RTC_VL_CLR:
 		status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
diff --git a/drivers/rtc/rtc-asm9260.c b/drivers/rtc/rtc-asm9260.c
index 10064bdabdff..3ab81cdec00b 100644
--- a/drivers/rtc/rtc-asm9260.c
+++ b/drivers/rtc/rtc-asm9260.c
@@ -264,6 +264,9 @@ static int asm9260_rtc_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->iobase);
 
 	priv->clk = devm_clk_get(dev, "ahb");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
 	ret = clk_prepare_enable(priv->clk);
 	if (ret) {
 		dev_err(dev, "Failed to enable clk!\n");
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 3b833e02a657..5e811e04cb21 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/bcd.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/interrupt.h>
@@ -30,7 +31,51 @@
 #include <linux/time.h>
 #include <linux/uaccess.h>
 
-#include "rtc-at91rm9200.h"
+#define	AT91_RTC_CR		0x00			/* Control Register */
+#define		AT91_RTC_UPDTIM		BIT(0)		/* Update Request Time Register */
+#define		AT91_RTC_UPDCAL		BIT(1)		/* Update Request Calendar Register */
+
+#define	AT91_RTC_MR		0x04			/* Mode Register */
+
+#define	AT91_RTC_TIMR		0x08			/* Time Register */
+#define		AT91_RTC_SEC		GENMASK(6, 0)	/* Current Second */
+#define		AT91_RTC_MIN		GENMASK(14, 8)	/* Current Minute */
+#define		AT91_RTC_HOUR		GENMASK(21, 16)	/* Current Hour */
+#define		AT91_RTC_AMPM		BIT(22)		/* Ante Meridiem Post Meridiem Indicator */
+
+#define	AT91_RTC_CALR		0x0c			/* Calendar Register */
+#define		AT91_RTC_CENT		GENMASK(6, 0)	/* Current Century */
+#define		AT91_RTC_YEAR		GENMASK(15, 8)	/* Current Year */
+#define		AT91_RTC_MONTH		GENMASK(20, 16)	/* Current Month */
+#define		AT91_RTC_DAY		GENMASK(23, 21)	/* Current Day */
+#define		AT91_RTC_DATE		GENMASK(29, 24)	/* Current Date */
+
+#define	AT91_RTC_TIMALR		0x10			/* Time Alarm Register */
+#define		AT91_RTC_SECEN		BIT(7)		/* Second Alarm Enable */
+#define		AT91_RTC_MINEN		BIT(15)		/* Minute Alarm Enable */
+#define		AT91_RTC_HOUREN		BIT(23)		/* Hour Alarm Enable */
+
+#define	AT91_RTC_CALALR		0x14			/* Calendar Alarm Register */
+#define		AT91_RTC_MTHEN		BIT(23)		/* Month Alarm Enable */
+#define		AT91_RTC_DATEEN		BIT(31)		/* Date Alarm Enable */
+
+#define	AT91_RTC_SR		0x18			/* Status Register */
+#define		AT91_RTC_ACKUPD		BIT(0)		/* Acknowledge for Update */
+#define		AT91_RTC_ALARM		BIT(1)		/* Alarm Flag */
+#define		AT91_RTC_SECEV		BIT(2)		/* Second Event */
+#define		AT91_RTC_TIMEV		BIT(3)		/* Time Event */
+#define		AT91_RTC_CALEV		BIT(4)		/* Calendar Event */
+
+#define	AT91_RTC_SCCR		0x1c			/* Status Clear Command Register */
+#define	AT91_RTC_IER		0x20			/* Interrupt Enable Register */
+#define	AT91_RTC_IDR		0x24			/* Interrupt Disable Register */
+#define	AT91_RTC_IMR		0x28			/* Interrupt Mask Register */
+
+#define	AT91_RTC_VER		0x2c			/* Valid Entry Register */
+#define		AT91_RTC_NVTIM		BIT(0)		/* Non valid Time */
+#define		AT91_RTC_NVCAL		BIT(1)		/* Non valid Calendar */
+#define		AT91_RTC_NVTIMALR	BIT(2)		/* Non valid Time Alarm */
+#define		AT91_RTC_NVCALALR	BIT(3)		/* Non valid Calendar Alarm */
 
 #define at91_rtc_read(field) \
 	readl_relaxed(at91_rtc_regs + field)
@@ -117,20 +162,20 @@ static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg,
 	} while ((time != at91_rtc_read(timereg)) ||
 			(date != at91_rtc_read(calreg)));
 
-	tm->tm_sec  = bcd2bin((time & AT91_RTC_SEC) >> 0);
-	tm->tm_min  = bcd2bin((time & AT91_RTC_MIN) >> 8);
-	tm->tm_hour = bcd2bin((time & AT91_RTC_HOUR) >> 16);
+	tm->tm_sec  = bcd2bin(FIELD_GET(AT91_RTC_SEC, time));
+	tm->tm_min  = bcd2bin(FIELD_GET(AT91_RTC_MIN, time));
+	tm->tm_hour = bcd2bin(FIELD_GET(AT91_RTC_HOUR, time));
 
 	/*
 	 * The Calendar Alarm register does not have a field for
 	 * the year - so these will return an invalid value.
 	 */
 	tm->tm_year  = bcd2bin(date & AT91_RTC_CENT) * 100;	/* century */
-	tm->tm_year += bcd2bin((date & AT91_RTC_YEAR) >> 8);	/* year */
+	tm->tm_year += bcd2bin(FIELD_GET(AT91_RTC_YEAR, date));	/* year */
 
-	tm->tm_wday = bcd2bin((date & AT91_RTC_DAY) >> 21) - 1;	/* day of the week [0-6], Sunday=0 */
-	tm->tm_mon  = bcd2bin((date & AT91_RTC_MONTH) >> 16) - 1;
-	tm->tm_mday = bcd2bin((date & AT91_RTC_DATE) >> 24);
+	tm->tm_wday = bcd2bin(FIELD_GET(AT91_RTC_DAY, date)) - 1;	/* day of the week [0-6], Sunday=0 */
+	tm->tm_mon  = bcd2bin(FIELD_GET(AT91_RTC_MONTH, date)) - 1;
+	tm->tm_mday = bcd2bin(FIELD_GET(AT91_RTC_DATE, date));
 }
 
 /*
@@ -167,16 +212,17 @@ static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
 	at91_rtc_write_idr(AT91_RTC_ACKUPD);
 
 	at91_rtc_write(AT91_RTC_TIMR,
-			  bin2bcd(tm->tm_sec) << 0
-			| bin2bcd(tm->tm_min) << 8
-			| bin2bcd(tm->tm_hour) << 16);
+			  FIELD_PREP(AT91_RTC_SEC, bin2bcd(tm->tm_sec))
+			| FIELD_PREP(AT91_RTC_MIN, bin2bcd(tm->tm_min))
+			| FIELD_PREP(AT91_RTC_HOUR, bin2bcd(tm->tm_hour)));
 
 	at91_rtc_write(AT91_RTC_CALR,
-			  bin2bcd((tm->tm_year + 1900) / 100)	/* century */
-			| bin2bcd(tm->tm_year % 100) << 8	/* year */
-			| bin2bcd(tm->tm_mon + 1) << 16		/* tm_mon starts at zero */
-			| bin2bcd(tm->tm_wday + 1) << 21	/* day of the week [0-6], Sunday=0 */
-			| bin2bcd(tm->tm_mday) << 24);
+			  FIELD_PREP(AT91_RTC_CENT,
+				     bin2bcd((tm->tm_year + 1900) / 100))
+			| FIELD_PREP(AT91_RTC_YEAR, bin2bcd(tm->tm_year % 100))
+			| FIELD_PREP(AT91_RTC_MONTH, bin2bcd(tm->tm_mon + 1))
+			| FIELD_PREP(AT91_RTC_DAY, bin2bcd(tm->tm_wday + 1))
+			| FIELD_PREP(AT91_RTC_DATE, bin2bcd(tm->tm_mday)));
 
 	/* Restart Time/Calendar */
 	cr = at91_rtc_read(AT91_RTC_CR);
@@ -211,25 +257,17 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
  */
 static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
-	struct rtc_time tm;
-
-	at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, &tm);
-
-	tm.tm_mon = alrm->time.tm_mon;
-	tm.tm_mday = alrm->time.tm_mday;
-	tm.tm_hour = alrm->time.tm_hour;
-	tm.tm_min = alrm->time.tm_min;
-	tm.tm_sec = alrm->time.tm_sec;
+	struct rtc_time tm = alrm->time;
 
 	at91_rtc_write_idr(AT91_RTC_ALARM);
 	at91_rtc_write(AT91_RTC_TIMALR,
-		  bin2bcd(tm.tm_sec) << 0
-		| bin2bcd(tm.tm_min) << 8
-		| bin2bcd(tm.tm_hour) << 16
+		  FIELD_PREP(AT91_RTC_SEC, bin2bcd(alrm->time.tm_sec))
+		| FIELD_PREP(AT91_RTC_MIN, bin2bcd(alrm->time.tm_min))
+		| FIELD_PREP(AT91_RTC_HOUR, bin2bcd(alrm->time.tm_hour))
 		| AT91_RTC_HOUREN | AT91_RTC_MINEN | AT91_RTC_SECEN);
 	at91_rtc_write(AT91_RTC_CALALR,
-		  bin2bcd(tm.tm_mon + 1) << 16		/* tm_mon starts at zero */
-		| bin2bcd(tm.tm_mday) << 24
+		  FIELD_PREP(AT91_RTC_MONTH, bin2bcd(alrm->time.tm_mon + 1))
+		| FIELD_PREP(AT91_RTC_DATE, bin2bcd(alrm->time.tm_mday))
 		| AT91_RTC_DATEEN | AT91_RTC_MTHEN);
 
 	if (alrm->enabled) {
@@ -254,20 +292,6 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
 
 	return 0;
 }
-/*
- * Provide additional RTC information in /proc/driver/rtc
- */
-static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
-{
-	unsigned long imr = at91_rtc_read_imr();
-
-	seq_printf(seq, "update_IRQ\t: %s\n",
-			(imr & AT91_RTC_ACKUPD) ? "yes" : "no");
-	seq_printf(seq, "periodic_IRQ\t: %s\n",
-			(imr & AT91_RTC_SECEV) ? "yes" : "no");
-
-	return 0;
-}
 
 /*
  * IRQ handler for the RTC
@@ -327,6 +351,12 @@ static const struct of_device_id at91_rtc_dt_ids[] = {
 		.compatible = "atmel,at91sam9x5-rtc",
 		.data = &at91sam9x5_config,
 	}, {
+		.compatible = "atmel,sama5d4-rtc",
+		.data = &at91rm9200_config,
+	}, {
+		.compatible = "atmel,sama5d2-rtc",
+		.data = &at91rm9200_config,
+	}, {
 		/* sentinel */
 	}
 };
@@ -337,7 +367,6 @@ static const struct rtc_class_ops at91_rtc_ops = {
 	.set_time	= at91_rtc_settime,
 	.read_alarm	= at91_rtc_readalarm,
 	.set_alarm	= at91_rtc_setalarm,
-	.proc		= at91_rtc_proc,
 	.alarm_irq_enable = at91_rtc_alarm_irq_enable,
 };
 
diff --git a/drivers/rtc/rtc-at91rm9200.h b/drivers/rtc/rtc-at91rm9200.h
deleted file mode 100644
index 8be5289da8e2..000000000000
--- a/drivers/rtc/rtc-at91rm9200.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-at91/include/mach/at91_rtc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Real Time Clock (RTC) - System peripheral registers.
- * Based on AT91RM9200 datasheet revision E.
- */
-
-#ifndef AT91_RTC_H
-#define AT91_RTC_H
-
-#define	AT91_RTC_CR		0x00			/* Control Register */
-#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
-#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
-#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
-#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
-#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
-#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
-#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
-#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
-#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
-
-#define	AT91_RTC_MR		0x04			/* Mode Register */
-#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
-
-#define	AT91_RTC_TIMR		0x08			/* Time Register */
-#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
-#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
-#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
-#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
-
-#define	AT91_RTC_CALR		0x0c			/* Calendar Register */
-#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
-#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
-#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
-#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
-#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
-
-#define	AT91_RTC_TIMALR		0x10			/* Time Alarm Register */
-#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
-#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
-#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
-
-#define	AT91_RTC_CALALR		0x14			/* Calendar Alarm Register */
-#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
-#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
-
-#define	AT91_RTC_SR		0x18			/* Status Register */
-#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
-#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
-#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
-#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
-#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
-
-#define	AT91_RTC_SCCR		0x1c			/* Status Clear Command Register */
-#define	AT91_RTC_IER		0x20			/* Interrupt Enable Register */
-#define	AT91_RTC_IDR		0x24			/* Interrupt Disable Register */
-#define	AT91_RTC_IMR		0x28			/* Interrupt Mask Register */
-
-#define	AT91_RTC_VER		0x2c			/* Valid Entry Register */
-#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
-#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
-#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
-#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
-
-#endif
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 033303708c8b..b795fe4cbd2e 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -850,7 +850,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
 			rtc_cmos_int_handler = cmos_interrupt;
 
 		retval = request_irq(rtc_irq, rtc_cmos_int_handler,
-				IRQF_SHARED, dev_name(&cmos_rtc.rtc->dev),
+				0, dev_name(&cmos_rtc.rtc->dev),
 				cmos_rtc.rtc);
 		if (retval < 0) {
 			dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq);
@@ -1197,8 +1197,6 @@ static void rtc_wake_off(struct device *dev)
 /* Enable use_acpi_alarm mode for Intel platforms no earlier than 2015 */
 static void use_acpi_alarm_quirks(void)
 {
-	int year;
-
 	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
 		return;
 
@@ -1208,8 +1206,10 @@ static void use_acpi_alarm_quirks(void)
 	if (!is_hpet_enabled())
 		return;
 
-	if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year >= 2015)
-		use_acpi_alarm = true;
+	if (dmi_get_bios_year() < 2015)
+		return;
+
+	use_acpi_alarm = true;
 }
 #else
 static inline void use_acpi_alarm_quirks(void) { }
@@ -1305,7 +1305,7 @@ static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
 		 * hardcode it on systems with a legacy PIC.
 		 */
 		if (nr_legacy_irqs())
-			irq = 8;
+			irq = RTC_IRQ;
 #endif
 		return cmos_do_probe(&pnp->dev,
 				pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
diff --git a/drivers/rtc/rtc-ds1343.c b/drivers/rtc/rtc-ds1343.c
index d21004a68ee0..ba143423875b 100644
--- a/drivers/rtc/rtc-ds1343.c
+++ b/drivers/rtc/rtc-ds1343.c
@@ -75,7 +75,6 @@ static const struct spi_device_id ds1343_id[] = {
 MODULE_DEVICE_TABLE(spi, ds1343_id);
 
 struct ds1343_priv {
-	struct spi_device *spi;
 	struct rtc_device *rtc;
 	struct regmap *map;
 	int irq;
@@ -362,12 +361,13 @@ static int ds1343_probe(struct spi_device *spi)
 	if (!priv)
 		return -ENOMEM;
 
-	priv->spi = spi;
-
 	/* RTC DS1347 works in spi mode 3 and
-	 * its chip select is active high
+	 * its chip select is active high. Active high should be defined as
+	 * "inverse polarity" as GPIO-based chip selects can be logically
+	 * active high but inverted by the GPIO library.
 	 */
-	spi->mode = SPI_MODE_3 | SPI_CS_HIGH;
+	spi->mode |= SPI_MODE_3;
+	spi->mode ^= SPI_CS_HIGH;
 	spi->bits_per_word = 8;
 	res = spi_setup(spi);
 	if (res)
diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c
index 443f6d05ce29..0fb79c4afb46 100644
--- a/drivers/rtc/rtc-hym8563.c
+++ b/drivers/rtc/rtc-hym8563.c
@@ -78,7 +78,6 @@
 struct hym8563 {
 	struct i2c_client	*client;
 	struct rtc_device	*rtc;
-	bool			valid;
 #ifdef CONFIG_COMMON_CLK
 	struct clk_hw		clkout_hw;
 #endif
@@ -91,19 +90,19 @@ struct hym8563 {
 static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct hym8563 *hym8563 = i2c_get_clientdata(client);
 	u8 buf[7];
 	int ret;
 
-	if (!hym8563->valid) {
-		dev_warn(&client->dev, "no valid clock/calendar values available\n");
-		return -EPERM;
-	}
-
 	ret = i2c_smbus_read_i2c_block_data(client, HYM8563_SEC, 7, buf);
 	if (ret < 0)
 		return ret;
 
+	if (buf[0] & HYM8563_SEC_VL) {
+		dev_warn(&client->dev,
+			 "no valid clock/calendar values available\n");
+		return -EINVAL;
+	}
+
 	tm->tm_sec = bcd2bin(buf[0] & HYM8563_SEC_MASK);
 	tm->tm_min = bcd2bin(buf[1] & HYM8563_MIN_MASK);
 	tm->tm_hour = bcd2bin(buf[2] & HYM8563_HOUR_MASK);
@@ -118,7 +117,6 @@ static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 static int hym8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct hym8563 *hym8563 = i2c_get_clientdata(client);
 	u8 buf[7];
 	int ret;
 
@@ -157,8 +155,6 @@ static int hym8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	if (ret < 0)
 		return ret;
 
-	hym8563->valid = true;
-
 	return 0;
 }
 
@@ -556,9 +552,8 @@ static int hym8563_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
-	hym8563->valid = !(ret & HYM8563_SEC_VL);
 	dev_dbg(&client->dev, "rtc information is %s\n",
-		hym8563->valid ? "valid" : "invalid");
+		(ret & HYM8563_SEC_VL) ? "invalid" : "valid");
 
 	hym8563->rtc = devm_rtc_device_register(&client->dev, client->name,
 						&hym8563_rtc_ops, THIS_MODULE);
diff --git a/drivers/rtc/rtc-moxart.c b/drivers/rtc/rtc-moxart.c
index 07b30a373a92..6b24ac9e1cfa 100644
--- a/drivers/rtc/rtc-moxart.c
+++ b/drivers/rtc/rtc-moxart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MOXA ART RTC driver.
  *
@@ -7,10 +8,6 @@
  *
  * Based on code from
  * Moxa Technology Co., Ltd. <www.moxa.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/init.h>
diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index 9135e2101752..cda238dfe69b 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -297,15 +297,7 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 
 	rtc->rtc_dev->ops = &mtk_rtc_ops;
 
-	ret = rtc_register_device(rtc->rtc_dev);
-	if (ret)
-		goto out_free_irq;
-
-	return 0;
-
-out_free_irq:
-	free_irq(rtc->irq, rtc);
-	return ret;
+	return rtc_register_device(rtc->rtc_dev);
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index 988a4dfcfaf8..d4ed20fb3194 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -616,7 +616,7 @@ static int rtc_pinconf_get(struct pinctrl_dev *pctldev,
 		break;
 	default:
 		return -ENOTSUPP;
-	};
+	}
 
 	*config = pinconf_to_config_packed(param, arg);
 
diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index ba5baaca47be..4e50d6768f13 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -199,11 +199,9 @@ static int pcf2127_rtc_ioctl(struct device *dev,
 		if (ret)
 			return ret;
 
-		touser = touser & PCF2127_BIT_CTRL3_BLF ? 1 : 0;
+		touser = touser & PCF2127_BIT_CTRL3_BLF ? RTC_VL_BACKUP_LOW : 0;
 
-		if (copy_to_user((void __user *)arg, &touser, sizeof(int)))
-			return -EFAULT;
-		return 0;
+		return put_user(touser, (unsigned int __user *)arg);
 	default:
 		return -ENOIOCTLCMD;
 	}
diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
index 1afa6d9fa9fb..1db17ba1fc64 100644
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -289,21 +289,9 @@ static int pcf85063_ioctl(struct device *dev, unsigned int cmd,
 		if (ret < 0)
 			return ret;
 
-		if (status & PCF85063_REG_SC_OS)
-			dev_warn(&pcf85063->rtc->dev, "Voltage low, data loss detected.\n");
+		status = status & PCF85063_REG_SC_OS ? RTC_VL_DATA_INVALID : 0;
 
-		status &= PCF85063_REG_SC_OS;
-
-		if (copy_to_user((void __user *)arg, &status, sizeof(int)))
-			return -EFAULT;
-
-		return 0;
-
-	case RTC_VL_CLR:
-		ret = regmap_update_bits(pcf85063->regmap, PCF85063_REG_SC,
-					 PCF85063_REG_SC_OS, 0);
-
-		return ret;
+		return put_user(status, (unsigned int __user *)arg);
 
 	default:
 		return -ENOIOCTLCMD;
diff --git a/drivers/rtc/rtc-pcf8523.c b/drivers/rtc/rtc-pcf8523.c
index b24c908f5f06..47e0f411dd5c 100644
--- a/drivers/rtc/rtc-pcf8523.c
+++ b/drivers/rtc/rtc-pcf8523.c
@@ -282,11 +282,11 @@ static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd,
 		ret = pcf8523_voltage_low(client);
 		if (ret < 0)
 			return ret;
+		if (ret)
+			ret = RTC_VL_BACKUP_LOW;
 
-		if (copy_to_user((void __user *)arg, &ret, sizeof(int)))
-			return -EFAULT;
+		return put_user(ret, (unsigned int __user *)arg);
 
-		return 0;
 	default:
 		return -ENOIOCTLCMD;
 	}
diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index 3c322f3079b0..2dc30eafa639 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -22,8 +22,8 @@
 
 #define PCF8563_REG_ST1		0x00 /* status */
 #define PCF8563_REG_ST2		0x01
-#define PCF8563_BIT_AIE		(1 << 1)
-#define PCF8563_BIT_AF		(1 << 3)
+#define PCF8563_BIT_AIE		BIT(1)
+#define PCF8563_BIT_AF		BIT(3)
 #define PCF8563_BITS_ST2_N	(7 << 5)
 
 #define PCF8563_REG_SC		0x02 /* datetime */
@@ -76,7 +76,6 @@ struct pcf8563 {
 	 * 1970...2069.
 	 */
 	int c_polarity;	/* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
-	int voltage_low; /* incicates if a low_voltage was detected */
 
 	struct i2c_client *client;
 #ifdef CONFIG_COMMON_CLK
@@ -208,7 +207,6 @@ static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		return err;
 
 	if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) {
-		pcf8563->voltage_low = 1;
 		dev_err(&client->dev,
 			"low voltage detected, date/time is not reliable.\n");
 		return -EINVAL;
@@ -276,43 +274,23 @@ static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 				9 - PCF8563_REG_SC, buf + PCF8563_REG_SC);
 }
 
-#ifdef CONFIG_RTC_INTF_DEV
 static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
-	struct pcf8563 *pcf8563 = i2c_get_clientdata(to_i2c_client(dev));
-	struct rtc_time tm;
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
 
 	switch (cmd) {
 	case RTC_VL_READ:
-		if (pcf8563->voltage_low)
-			dev_info(dev, "low voltage detected, date/time is not reliable.\n");
-
-		if (copy_to_user((void __user *)arg, &pcf8563->voltage_low,
-					sizeof(int)))
-			return -EFAULT;
-		return 0;
-	case RTC_VL_CLR:
-		/*
-		 * Clear the VL bit in the seconds register in case
-		 * the time has not been set already (which would
-		 * have cleared it). This does not really matter
-		 * because of the cached voltage_low value but do it
-		 * anyway for consistency.
-		 */
-		if (pcf8563_rtc_read_time(dev, &tm))
-			pcf8563_rtc_set_time(dev, &tm);
-
-		/* Clear the cached value. */
-		pcf8563->voltage_low = 0;
+		ret = i2c_smbus_read_byte_data(client, PCF8563_REG_SC);
+		if (ret < 0)
+			return ret;
 
-		return 0;
+		return put_user(ret & PCF8563_SC_LV ? RTC_VL_DATA_INVALID : 0,
+				(unsigned int __user *)arg);
 	default:
 		return -ENOIOCTLCMD;
 	}
 }
-#else
-#define pcf8563_rtc_ioctl NULL
-#endif
 
 static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
 {
diff --git a/drivers/rtc/rtc-rv3028.c b/drivers/rtc/rtc-rv3028.c
index 6b7b3a69601a..a0ddc86c975a 100644
--- a/drivers/rtc/rtc-rv3028.c
+++ b/drivers/rtc/rtc-rv3028.c
@@ -428,21 +428,8 @@ static int rv3028_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 		if (ret < 0)
 			return ret;
 
-		if (status & RV3028_STATUS_PORF)
-			dev_warn(&rv3028->rtc->dev, "Voltage low, data loss detected.\n");
-
-		status &= RV3028_STATUS_PORF;
-
-		if (copy_to_user((void __user *)arg, &status, sizeof(int)))
-			return -EFAULT;
-
-		return 0;
-
-	case RTC_VL_CLR:
-		ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
-					 RV3028_STATUS_PORF, 0);
-
-		return ret;
+		status = status & RV3028_STATUS_PORF ? RTC_VL_DATA_INVALID : 0;
+		return put_user(status, (unsigned int __user *)arg);
 
 	default:
 		return -ENOIOCTLCMD;
diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c
index 4cdf6588e1d9..62718231731b 100644
--- a/drivers/rtc/rtc-rv3029c2.c
+++ b/drivers/rtc/rtc-rv3029c2.c
@@ -109,10 +109,8 @@
 #define RV3029_CONTROL_E2P_TOV_MASK	0x3F /* XTAL turnover temp mask */
 
 /* user ram section */
-#define RV3029_USR1_RAM_PAGE		0x38
-#define RV3029_USR1_SECTION_LEN		0x04
-#define RV3029_USR2_RAM_PAGE		0x3C
-#define RV3029_USR2_SECTION_LEN		0x04
+#define RV3029_RAM_PAGE			0x38
+#define RV3029_RAM_SECTION_LEN		8
 
 struct rv3029_data {
 	struct device		*dev;
@@ -121,77 +119,13 @@ struct rv3029_data {
 	int irq;
 };
 
-static int rv3029_read_regs(struct device *dev, u8 reg, u8 *buf,
-			    unsigned int len)
-{
-	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
-
-	if ((reg > RV3029_USR1_RAM_PAGE + 7) ||
-	    (reg + len > RV3029_USR1_RAM_PAGE + 8))
-		return -EINVAL;
-
-	return regmap_bulk_read(rv3029->regmap, reg, buf, len);
-}
-
-static int rv3029_write_regs(struct device *dev, u8 reg, u8 const buf[],
-			     unsigned int len)
-{
-	struct rv3029_data *rv3029 = dev_get_drvdata(dev);
-
-	if ((reg > RV3029_USR1_RAM_PAGE + 7) ||
-	    (reg + len > RV3029_USR1_RAM_PAGE + 8))
-		return -EINVAL;
-
-	return regmap_bulk_write(rv3029->regmap, reg, buf, len);
-}
-
-static int rv3029_update_bits(struct device *dev, u8 reg, u8 mask, u8 set)
-{
-	u8 buf;
-	int ret;
-
-	ret = rv3029_read_regs(dev, reg, &buf, 1);
-	if (ret < 0)
-		return ret;
-	buf &= ~mask;
-