Merge tag 'wireless-drivers-next-for-davem-2015-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
ath10k:

* enable channel 144 on 5 GHz
* enable Adaptive Noise Immunity (ANI) by default
* add Wake on Wireless LAN (WOW) patterns support
* add basic Tunneled Direct Link Setup (TDLS) support
* add multi-channel support for QCA6174
* enable IBSS RSN support
* enable Bluetooth Coexistance whenever firmware supports it
* add more versatile way to set bitrates used by the firmware

ath9k:

* spectral scan: add support for multiple FFT frames per report

iwlwifi:

* major rework of the scan code (Luca)
* some work on the thermal code (Chaya Rachel)
* some work on the firwmare debugging infrastructure

brcmfmac:

* SDIO suspend and resume fixes
* wiphy band info and changes in regulatory settings
* add support for BCM4324 SDIO and BCM4358 PCIe
* enable support of PCIe devices on router platforms (Hante)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

75 files changed, 6681 insertions, 2342 deletions

diff --git a/drivers/bcma/driver_gpio.c b/drivers/bcma/driver_gpio.c
index 74ccb02e0f10..5f6018e7cd4c 100644
--- a/drivers/bcma/driver_gpio.c
+++ b/drivers/bcma/driver_gpio.c
@@ -226,6 +226,7 @@ int bcma_gpio_init(struct bcma_drv_cc *cc)
 		chip->of_node	= cc->core->dev.of_node;
 #endif
 	switch (bus->chipinfo.id) {
+	case BCMA_CHIP_ID_BCM4707:
 	case BCMA_CHIP_ID_BCM5357:
 	case BCMA_CHIP_ID_BCM53572:
 		chip->ngpio	= 32;
@@ -235,16 +236,17 @@ int bcma_gpio_init(struct bcma_drv_cc *cc)
 	}
 
 	/*
-	 * On MIPS we register GPIO devices (LEDs, buttons) using absolute GPIO
-	 * pin numbers. We don't have Device Tree there and we can't really use
-	 * relative (per chip) numbers.
-	 * So let's use predictable base for BCM47XX and "random" for all other.
+	 * Register SoC GPIO devices with absolute GPIO pin base.
+	 * On MIPS, we don't have Device Tree and we can't use relative (per chip)
+	 * GPIO numbers.
+	 * On some ARM devices, user space may want to access some system GPIO
+	 * pins directly, which is easier to do with a predictable GPIO base.
 	 */
-#if IS_BUILTIN(CONFIG_BCM47XX)
-	chip->base		= bus->num * BCMA_GPIO_MAX_PINS;
-#else
-	chip->base		= -1;
-#endif
+	if (IS_BUILTIN(CONFIG_BCM47XX) ||
+	    cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
+		chip->base		= bus->num * BCMA_GPIO_MAX_PINS;
+	else
+		chip->base		= -1;
 
 	err = bcma_gpio_irq_domain_init(cc);
 	if (err)
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index 7e9481099a8e..65ef483ebf50 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -251,6 +251,7 @@ void ath_printk(const char *level, const struct ath_common *common,
  * @ATH_DBG_DFS: radar datection
  * @ATH_DBG_WOW: Wake on Wireless
  * @ATH_DBG_DYNACK: dynack handling
+ * @ATH_DBG_SPECTRAL_SCAN: FFT spectral scan
  * @ATH_DBG_ANY: enable all debugging
  *
  * The debug level is used to control the amount and type of debugging output
@@ -280,6 +281,7 @@ enum ATH_DEBUG {
 	ATH_DBG_WOW		= 0x00020000,
 	ATH_DBG_CHAN_CTX	= 0x00040000,
 	ATH_DBG_DYNACK		= 0x00080000,
+	ATH_DBG_SPECTRAL_SCAN	= 0x00100000,
 	ATH_DBG_ANY		= 0xffffffff
 };
 
diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
index f4dbb3e93bf8..9729e6941635 100644
--- a/drivers/net/wireless/ath/ath10k/Makefile
+++ b/drivers/net/wireless/ath/ath10k/Makefile
@@ -10,13 +10,15 @@ ath10k_core-y += mac.o \
 		 wmi.o \
 		 wmi-tlv.o \
 		 bmi.o \
-		 hw.o
+		 hw.o \
+		 p2p.o
 
 ath10k_core-$(CONFIG_ATH10K_DEBUGFS) += spectral.o
 ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
 ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
 ath10k_core-$(CONFIG_THERMAL) += thermal.o
 ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o
+ath10k_core-$(CONFIG_PM) += wow.o
 
 obj-$(CONFIG_ATH10K_PCI) += ath10k_pci.o
 ath10k_pci-y += pci.o \
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index c0e454bb6a8d..987b266278a8 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -482,31 +482,79 @@ static int ath10k_fetch_cal_file(struct ath10k *ar)
 	return 0;
 }
 
-static int ath10k_core_fetch_firmware_api_1(struct ath10k *ar)
+static int ath10k_core_fetch_spec_board_file(struct ath10k *ar)
 {
-	int ret = 0;
+	char filename[100];
 
-	if (ar->hw_params.fw.fw == NULL) {
-		ath10k_err(ar, "firmware file not defined\n");
-		return -EINVAL;
-	}
+	scnprintf(filename, sizeof(filename), "board-%s-%s.bin",
+		  ath10k_bus_str(ar->hif.bus), ar->spec_board_id);
+
+	ar->board = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, filename);
+	if (IS_ERR(ar->board))
+		return PTR_ERR(ar->board);
+
+	ar->board_data = ar->board->data;
+	ar->board_len = ar->board->size;
+	ar->spec_board_loaded = true;
 
-	if (ar->hw_params.fw.board == NULL) {
-		ath10k_err(ar, "board data file not defined");
+	return 0;
+}
+
+static int ath10k_core_fetch_generic_board_file(struct ath10k *ar)
+{
+	if (!ar->hw_params.fw.board) {
+		ath10k_err(ar, "failed to find board file fw entry\n");
 		return -EINVAL;
 	}
 
 	ar->board = ath10k_fetch_fw_file(ar,
 					 ar->hw_params.fw.dir,
 					 ar->hw_params.fw.board);
-	if (IS_ERR(ar->board)) {
-		ret = PTR_ERR(ar->board);
-		ath10k_err(ar, "could not fetch board data (%d)\n", ret);
-		goto err;
-	}
+	if (IS_ERR(ar->board))
+		return PTR_ERR(ar->board);
 
 	ar->board_data = ar->board->data;
 	ar->board_len = ar->board->size;
+	ar->spec_board_loaded = false;
+
+	return 0;
+}
+
+static int ath10k_core_fetch_board_file(struct ath10k *ar)
+{
+	int ret;
+
+	if (strlen(ar->spec_board_id) > 0) {
+		ret = ath10k_core_fetch_spec_board_file(ar);
+		if (ret) {
+			ath10k_info(ar, "failed to load spec board file, falling back to generic: %d\n",
+				    ret);
+			goto generic;
+		}
+
+		ath10k_dbg(ar, ATH10K_DBG_BOOT, "found specific board file for %s\n",
+			   ar->spec_board_id);
+		return 0;
+	}
+
+generic:
+	ret = ath10k_core_fetch_generic_board_file(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to fetch generic board data: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_core_fetch_firmware_api_1(struct ath10k *ar)
+{
+	int ret = 0;
+
+	if (ar->hw_params.fw.fw == NULL) {
+		ath10k_err(ar, "firmware file not defined\n");
+		return -EINVAL;
+	}
 
 	ar->firmware = ath10k_fetch_fw_file(ar,
 					    ar->hw_params.fw.dir,
@@ -675,6 +723,17 @@ static int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name)
 			ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie wmi op version %d\n",
 				   ar->wmi.op_version);
 			break;
+		case ATH10K_FW_IE_HTT_OP_VERSION:
+			if (ie_len != sizeof(u32))
+				break;
+
+			version = (__le32 *)data;
+
+			ar->htt.op_version = le32_to_cpup(version);
+
+			ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie htt op version %d\n",
+				   ar->htt.op_version);
+			break;
 		default:
 			ath10k_warn(ar, "Unknown FW IE: %u\n",
 				    le32_to_cpu(hdr->id));
@@ -695,27 +754,6 @@ static int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name)
 		goto err;
 	}
 
-	/* now fetch the board file */
-	if (ar->hw_params.fw.board == NULL) {
-		ath10k_err(ar, "board data file not defined");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	ar->board = ath10k_fetch_fw_file(ar,
-					 ar->hw_params.fw.dir,
-					 ar->hw_params.fw.board);
-	if (IS_ERR(ar->board)) {
-		ret = PTR_ERR(ar->board);
-		ath10k_err(ar, "could not fetch board data '%s/%s' (%d)\n",
-			   ar->hw_params.fw.dir, ar->hw_params.fw.board,
-			   ret);
-		goto err;
-	}
-
-	ar->board_data = ar->board->data;
-	ar->board_len = ar->board->size;
-
 	return 0;
 
 err:
@@ -730,6 +768,19 @@ static int ath10k_core_fetch_firmware_files(struct ath10k *ar)
 	/* calibration file is optional, don't check for any errors */
 	ath10k_fetch_cal_file(ar);
 
+	ret = ath10k_core_fetch_board_file(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to fetch board file: %d\n", ret);
+		return ret;
+	}
+
+	ar->fw_api = 5;
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
+
+	ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API5_FILE);
+	if (ret == 0)
+		goto success;
+
 	ar->fw_api = 4;
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api);
 
@@ -958,6 +1009,8 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 		ar->max_num_stations = TARGET_NUM_STATIONS;
 		ar->max_num_vdevs = TARGET_NUM_VDEVS;
 		ar->htt.max_num_pending_tx = TARGET_NUM_MSDU_DESC;
+		ar->fw_stats_req_mask = WMI_STAT_PDEV | WMI_STAT_VDEV |
+			WMI_STAT_PEER;
 		break;
 	case ATH10K_FW_WMI_OP_VERSION_10_1:
 	case ATH10K_FW_WMI_OP_VERSION_10_2:
@@ -966,12 +1019,17 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 		ar->max_num_stations = TARGET_10X_NUM_STATIONS;
 		ar->max_num_vdevs = TARGET_10X_NUM_VDEVS;
 		ar->htt.max_num_pending_tx = TARGET_10X_NUM_MSDU_DESC;
+		ar->fw_stats_req_mask = WMI_STAT_PEER;
 		break;
 	case ATH10K_FW_WMI_OP_VERSION_TLV:
 		ar->max_num_peers = TARGET_TLV_NUM_PEERS;
 		ar->max_num_stations = TARGET_TLV_NUM_STATIONS;
 		ar->max_num_vdevs = TARGET_TLV_NUM_VDEVS;
+		ar->max_num_tdls_vdevs = TARGET_TLV_NUM_TDLS_VDEVS;
 		ar->htt.max_num_pending_tx = TARGET_TLV_NUM_MSDU_DESC;
+		ar->wow.max_num_patterns = TARGET_TLV_NUM_WOW_PATTERNS;
+		ar->fw_stats_req_mask = WMI_STAT_PDEV | WMI_STAT_VDEV |
+			WMI_STAT_PEER;
 		break;
 	case ATH10K_FW_WMI_OP_VERSION_UNSET:
 	case ATH10K_FW_WMI_OP_VERSION_MAX:
@@ -979,6 +1037,29 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 		return -EINVAL;
 	}
 
+	/* Backwards compatibility for firmwares without
+	 * ATH10K_FW_IE_HTT_OP_VERSION.
+	 */
+	if (ar->htt.op_version == ATH10K_FW_HTT_OP_VERSION_UNSET) {
+		switch (ar->wmi.op_version) {
+		case ATH10K_FW_WMI_OP_VERSION_MAIN:
+			ar->htt.op_version = ATH10K_FW_HTT_OP_VERSION_MAIN;
+			break;
+		case ATH10K_FW_WMI_OP_VERSION_10_1:
+		case ATH10K_FW_WMI_OP_VERSION_10_2:
+		case ATH10K_FW_WMI_OP_VERSION_10_2_4:
+			ar->htt.op_version = ATH10K_FW_HTT_OP_VERSION_10_1;
+			break;
+		case ATH10K_FW_WMI_OP_VERSION_TLV:
+			ar->htt.op_version = ATH10K_FW_HTT_OP_VERSION_TLV;
+			break;
+		case ATH10K_FW_WMI_OP_VERSION_UNSET:
+		case ATH10K_FW_WMI_OP_VERSION_MAX:
+			WARN_ON(1);
+			return -EINVAL;
+		}
+	}
+
 	return 0;
 }
 
@@ -1080,9 +1161,8 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
 
 	if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
 		status = ath10k_wmi_wait_for_service_ready(ar);
-		if (status <= 0) {
+		if (status) {
 			ath10k_warn(ar, "wmi service ready event not received");
-			status = -ETIMEDOUT;
 			goto err_hif_stop;
 		}
 	}
@@ -1098,9 +1178,8 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
 	}
 
 	status = ath10k_wmi_wait_for_unified_ready(ar);
-	if (status <= 0) {
+	if (status) {
 		ath10k_err(ar, "wmi unified ready event not received\n");
-		status = -ETIMEDOUT;
 		goto err_hif_stop;
 	}
 
@@ -1151,6 +1230,7 @@ EXPORT_SYMBOL(ath10k_core_start);
 int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt)
 {
 	int ret;
+	unsigned long time_left;
 
 	reinit_completion(&ar->target_suspend);
 
@@ -1160,9 +1240,9 @@ int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt)
 		return ret;
 	}
 
-	ret = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ);
+	time_left = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ);
 
-	if (ret == 0) {
+	if (!time_left) {
 		ath10k_warn(ar, "suspend timed out - target pause event never came\n");
 		return -ETIMEDOUT;
 	}
@@ -1386,6 +1466,7 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 	init_completion(&ar->scan.completed);
 	init_completion(&ar->scan.on_channel);
 	init_completion(&ar->target_suspend);
+	init_completion(&ar->wow.wakeup_completed);
 
 	init_completion(&ar->install_key_done);
 	init_completion(&ar->vdev_setup_done);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index f65310c3ba5f..8444adf42195 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -35,6 +35,7 @@
 #include "../dfs_pattern_detector.h"
 #include "spectral.h"
 #include "thermal.h"
+#include "wow.h"
 
 #define MS(_v, _f) (((_v) & _f##_MASK) >> _f##_LSB)
 #define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
@@ -43,15 +44,16 @@
 #define ATH10K_SCAN_ID 0
 #define WMI_READY_TIMEOUT (5 * HZ)
 #define ATH10K_FLUSH_TIMEOUT_HZ (5*HZ)
-#define ATH10K_NUM_CHANS 38
+#define ATH10K_CONNECTION_LOSS_HZ (3*HZ)
+#define ATH10K_NUM_CHANS 39
 
 /* Antenna noise floor */
 #define ATH10K_DEFAULT_NOISE_FLOOR -95
 
 #define ATH10K_MAX_NUM_MGMT_PENDING 128
 
-/* number of failed packets */
-#define ATH10K_KICKOUT_THRESHOLD 50
+/* number of failed packets (20 packets with 16 sw reties each) */
+#define ATH10K_KICKOUT_THRESHOLD (20 * 16)
 
 /*
  * Use insanely high numbers to make sure that the firmware implementation
@@ -82,6 +84,8 @@ struct ath10k_skb_cb {
 	dma_addr_t paddr;
 	u8 eid;
 	u8 vdev_id;
+	enum ath10k_hw_txrx_mode txmode;
+	bool is_protected;
 
 	struct {
 		u8 tid;
@@ -280,6 +284,15 @@ struct ath10k_sta {
 #endif
 };
 
+struct ath10k_chanctx {
+	/* Used to story copy of chanctx_conf to avoid inconsistencies. Ideally
+	 * mac80211 should allow some sort of explicit locking to guarantee
+	 * that the publicly available chanctx_conf can be accessed safely at
+	 * all times.
+	 */
+	struct ieee80211_chanctx_conf conf;
+};
+
 #define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5*HZ)
 
 enum ath10k_beacon_state {
@@ -301,6 +314,7 @@ struct ath10k_vif {
 	enum ath10k_beacon_state beacon_state;
 	void *beacon_buf;
 	dma_addr_t beacon_paddr;
+	unsigned long tx_paused; /* arbitrary values defined by target */
 
 	struct ath10k *ar;
 	struct ieee80211_vif *vif;
@@ -334,13 +348,13 @@ struct ath10k_vif {
 		} ap;
 	} u;
 
-	u8 fixed_rate;
-	u8 fixed_nss;
-	u8 force_sgi;
 	bool use_cts_prot;
 	int num_legacy_stations;
 	int txpower;
 	struct wmi_wmm_params_all_arg wmm_params;
+	struct work_struct ap_csa_work;
+	struct delayed_work connection_loss_work;
+	struct cfg80211_bitrate_mask bitrate_mask;
 };
 
 struct ath10k_vif_iter {
@@ -440,6 +454,12 @@ enum ath10k_fw_features {
 	 */
 	ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT = 5,
 
+	/* Some firmware revisions have an incomplete WoWLAN implementation
+	 * despite WMI service bit being advertised. This feature flag is used
+	 * to distinguish whether WoWLAN is really supported or not.
+	 */
+	ATH10K_FW_FEATURE_WOWLAN_SUPPORT = 6,
+
 	/* keep last */
 	ATH10K_FW_FEATURE_COUNT,
 };
@@ -498,6 +518,11 @@ static inline const char *ath10k_scan_state_str(enum ath10k_scan_state state)
 	return "unknown";
 }
 
+enum ath10k_tx_pause_reason {
+	ATH10K_TX_PAUSE_Q_FULL,
+	ATH10K_TX_PAUSE_MAX,
+};
+
 struct ath10k {
 	struct ath_common ath_common;
 	struct ieee80211_hw *hw;
@@ -511,12 +536,15 @@ struct ath10k {
 	u32 fw_version_minor;
 	u16 fw_version_release;
 	u16 fw_version_build;
+	u32 fw_stats_req_mask;
 	u32 phy_capability;
 	u32 hw_min_tx_power;
 	u32 hw_max_tx_power;
 	u32 ht_cap_info;
 	u32 vht_cap_info;<