Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine updates from Vinod Koul:

 - new drivers for:
        - Ingenic JZ4780 controller
        - APM X-Gene controller
        - Freescale RaidEngine device
        - Renesas USB Controller

  - remove device_alloc_chan_resources dummy handlers

  - sh driver cleanups for peri peri and related emmc and asoc patches
    as well

  - fixes and enhancements spread over the drivers

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits)
  dmaengine: dw: don't prompt for DW_DMAC_CORE
  dmaengine: shdmac: avoid unused variable warnings
  dmaengine: fix platform_no_drv_owner.cocci warnings
  dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe()
  dmaengine: at_xdmac: unlock spin lock before return
  dmaengine: xgene: devm_ioremap() returns NULL on error
  dmaengine: xgene: buffer overflow in xgene_dma_init_channels()
  dmaengine: usb-dmac: Fix dereferencing freed memory 'desc'
  dmaengine: sa11x0: report slave capabilities to upper layers
  dmaengine: vdma: Fix compilation warnings
  dmaengine: fsl_raid: statify fsl_re_chan_probe
  dmaengine: Driver support for FSL RaidEngine device.
  dmaengine: xgene_dma_init_ring_mngr() can be static
  Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding
  arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes
  dmaengine: Add support for APM X-Gene SoC DMA engine driver
  dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver
  dmaengine: renesas,usb-dmac: Add device tree bindings documentation
  dmaengine: edma: fixed wrongly initialized data parameter to the edma callback
  dmaengine: ste_dma40: fix implicit conversion
  ...

56 files changed, 5459 insertions, 628 deletions

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 91eced044321..fd7ac13f2574 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -112,6 +112,17 @@ config FSL_DMA
 	  EloPlus is on mpc85xx and mpc86xx and Pxxx parts, and the Elo3 is on
 	  some Txxx and Bxxx parts.
 
+config FSL_RAID
+        tristate "Freescale RAID engine Support"
+        depends on FSL_SOC && !ASYNC_TX_ENABLE_CHANNEL_SWITCH
+        select DMA_ENGINE
+        select DMA_ENGINE_RAID
+        ---help---
+          Enable support for Freescale RAID Engine. RAID Engine is
+          available on some QorIQ SoCs (like P5020/P5040). It has
+          the capability to offload memcpy, xor and pq computation
+	  for raid5/6.
+
 source "drivers/dma/hsu/Kconfig"
 
 config MPC512X_DMA
@@ -347,6 +358,16 @@ config DMA_JZ4740
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 
+config DMA_JZ4780
+	tristate "JZ4780 DMA support"
+	depends on MACH_JZ4780
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  This selects support for the DMA controller in Ingenic JZ4780 SoCs.
+	  If you have a board based on such a SoC and wish to use DMA for
+	  devices which can use the DMA controller, say Y or M here.
+
 config K3_DMA
 	tristate "Hisilicon K3 DMA support"
 	depends on ARCH_HI3xxx
@@ -414,6 +435,14 @@ config IMG_MDC_DMA
 	help
 	  Enable support for the IMG multi-threaded DMA controller (MDC).
 
+config XGENE_DMA
+	tristate "APM X-Gene DMA support"
+	select DMA_ENGINE
+	select DMA_ENGINE_RAID
+	select ASYNC_TX_ENABLE_CHANNEL_SWITCH
+	help
+	  Enable support for the APM X-Gene SoC DMA engine.
+
 config DMA_ENGINE
 	bool
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 7e8301cb489d..69f77d5ba53b 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -41,9 +41,11 @@ obj-$(CONFIG_DMA_OMAP) += omap-dma.o
 obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
 obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
 obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
+obj-$(CONFIG_DMA_JZ4780) += dma-jz4780.o
 obj-$(CONFIG_TI_CPPI41) += cppi41.o
 obj-$(CONFIG_K3_DMA) += k3dma.o
 obj-$(CONFIG_MOXART_DMA) += moxart-dma.o
+obj-$(CONFIG_FSL_RAID) += fsl_raid.o
 obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
 obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o
 obj-y += xilinx/
@@ -51,3 +53,4 @@ obj-$(CONFIG_INTEL_MIC_X100_DMA) += mic_x100_dma.o
 obj-$(CONFIG_NBPFAXI_DMA) += nbpfaxi.o
 obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o
 obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
+obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 83aa55d6fa5d..49d396ec06e5 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -15,10 +15,6 @@
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
  * The full GNU General Public License is in this distribution in the file
  * called COPYING.
  *
@@ -1195,11 +1191,6 @@ static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x,
 /*
  * The DMA ENGINE API
  */
-static int pl08x_alloc_chan_resources(struct dma_chan *chan)
-{
-	return 0;
-}
-
 static void pl08x_free_chan_resources(struct dma_chan *chan)
 {
 	/* Ensure all queued descriptors are freed */
@@ -2066,7 +2057,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 	/* Initialize memcpy engine */
 	dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask);
 	pl08x->memcpy.dev = &adev->dev;
-	pl08x->memcpy.device_alloc_chan_resources = pl08x_alloc_chan_resources;
 	pl08x->memcpy.device_free_chan_resources = pl08x_free_chan_resources;
 	pl08x->memcpy.device_prep_dma_memcpy = pl08x_prep_dma_memcpy;
 	pl08x->memcpy.device_prep_dma_interrupt = pl08x_prep_dma_interrupt;
@@ -2085,7 +2075,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 	dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask);
 	dma_cap_set(DMA_CYCLIC, pl08x->slave.cap_mask);
 	pl08x->slave.dev = &adev->dev;
-	pl08x->slave.device_alloc_chan_resources = pl08x_alloc_chan_resources;
 	pl08x->slave.device_free_chan_resources = pl08x_free_chan_resources;
 	pl08x->slave.device_prep_dma_interrupt = pl08x_prep_dma_interrupt;
 	pl08x->slave.device_tx_status = pl08x_dma_tx_status;
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 0b4fc6fb48ce..57b2141ddddc 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -65,6 +65,21 @@ static void atc_issue_pending(struct dma_chan *chan);
 
 /*----------------------------------------------------------------------*/
 
+static inline unsigned int atc_get_xfer_width(dma_addr_t src, dma_addr_t dst,
+						size_t len)
+{
+	unsigned int width;
+
+	if (!((src | dst  | len) & 3))
+		width = 2;
+	else if (!((src | dst | len) & 1))
+		width = 1;
+	else
+		width = 0;
+
+	return width;
+}
+
 static struct at_desc *atc_first_active(struct at_dma_chan *atchan)
 {
 	return list_first_entry(&atchan->active_list,
@@ -659,16 +674,10 @@ atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
 	 * We can be a lot more clever here, but this should take care
 	 * of the most common optimization.
 	 */
-	if (!((src | dest  | len) & 3)) {
-		ctrla = ATC_SRC_WIDTH_WORD | ATC_DST_WIDTH_WORD;
-		src_width = dst_width = 2;
-	} else if (!((src | dest | len) & 1)) {
-		ctrla = ATC_SRC_WIDTH_HALFWORD | ATC_DST_WIDTH_HALFWORD;
-		src_width = dst_width = 1;
-	} else {
-		ctrla = ATC_SRC_WIDTH_BYTE | ATC_DST_WIDTH_BYTE;
-		src_width = dst_width = 0;
-	}
+	src_width = dst_width = atc_get_xfer_width(src, dest, len);
+
+	ctrla = ATC_SRC_WIDTH(src_width) |
+		ATC_DST_WIDTH(dst_width);
 
 	for (offset = 0; offset < len; offset += xfer_count << src_width) {
 		xfer_count = min_t(size_t, (len - offset) >> src_width,
@@ -862,6 +871,144 @@ err:
 }
 
 /**
+ * atc_prep_dma_sg - prepare memory to memory scather-gather operation
+ * @chan: the channel to prepare operation on
+ * @dst_sg: destination scatterlist
+ * @dst_nents: number of destination scatterlist entries
+ * @src_sg: source scatterlist
+ * @src_nents: number of source scatterlist entries
+ * @flags: tx descriptor status flags
+ */
+static struct dma_async_tx_descriptor *
+atc_prep_dma_sg(struct dma_chan *chan,
+		struct scatterlist *dst_sg, unsigned int dst_nents,
+		struct scatterlist *src_sg, unsigned int src_nents,
+		unsigned long flags)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	struct at_desc		*desc = NULL;
+	struct at_desc		*first = NULL;
+	struct at_desc		*prev = NULL;
+	unsigned int		src_width;
+	unsigned int		dst_width;
+	size_t			xfer_count;
+	u32			ctrla;
+	u32			ctrlb;
+	size_t			dst_len = 0, src_len = 0;
+	dma_addr_t		dst = 0, src = 0;
+	size_t			len = 0, total_len = 0;
+
+	if (unlikely(dst_nents == 0 || src_nents == 0))
+		return NULL;
+
+	if (unlikely(dst_sg == NULL || src_sg == NULL))
+		return NULL;
+
+	ctrlb =   ATC_DEFAULT_CTRLB | ATC_IEN
+		| ATC_SRC_ADDR_MODE_INCR
+		| ATC_DST_ADDR_MODE_INCR
+		| ATC_FC_MEM2MEM;
+
+	/*
+	 * loop until there is either no more source or no more destination
+	 * scatterlist entry
+	 */
+	while (true) {
+
+		/* prepare the next transfer */
+		if (dst_len == 0) {
+
+			/* no more destination scatterlist entries */
+			if (!dst_sg || !dst_nents)
+				break;
+
+			dst = sg_dma_address(dst_sg);
+			dst_len = sg_dma_len(dst_sg);
+
+			dst_sg = sg_next(dst_sg);
+			dst_nents--;
+		}
+
+		if (src_len == 0) {
+
+			/* no more source scatterlist entries */
+			if (!src_sg || !src_nents)
+				break;
+
+			src = sg_dma_address(src_sg);
+			src_len = sg_dma_len(src_sg);
+
+			src_sg = sg_next(src_sg);
+			src_nents--;
+		}
+
+		len = min_t(size_t, src_len, dst_len);
+		if (len == 0)
+			continue;
+
+		/* take care for the alignment */
+		src_width = dst_width = atc_get_xfer_width(src, dst, len);
+
+		ctrla = ATC_SRC_WIDTH(src_width) |
+			ATC_DST_WIDTH(dst_width);
+
+		/*
+		 * The number of transfers to set up refer to the source width
+		 * that depends on the alignment.
+		 */
+		xfer_count = len >> src_width;
+		if (xfer_count > ATC_BTSIZE_MAX) {
+			xfer_count = ATC_BTSIZE_MAX;
+			len = ATC_BTSIZE_MAX << src_width;
+		}
+
+		/* create the transfer */
+		desc = atc_desc_get(atchan);
+		if (!desc)
+			goto err_desc_get;
+
+		desc->lli.saddr = src;
+		desc->lli.daddr = dst;
+		desc->lli.ctrla = ctrla | xfer_count;
+		desc->lli.ctrlb = ctrlb;
+
+		desc->txd.cookie = 0;
+		desc->len = len;
+
+		/*
+		 * Although we only need the transfer width for the first and
+		 * the last descriptor, its easier to set it to all descriptors.
+		 */
+		desc->tx_width = src_width;
+
+		atc_desc_chain(&first, &prev, desc);
+
+		/* update the lengths and addresses for the next loop cycle */
+		dst_len -= len;
+		src_len -= len;
+		dst += len;
+		src += len;
+
+		total_len += len;
+	}
+
+	/* First descriptor of the chain embedds additional information */
+	first->txd.cookie = -EBUSY;
+	first->total_len = total_len;
+
+	/* set end-of-link to the last link descriptor of list*/
+	set_desc_eol(desc);
+
+	first->txd.flags = flags; /* client is in control of this ack */
+
+	return &first->txd;
+
+err_desc_get:
+	atc_desc_put(atchan, first);
+	return NULL;
+}
+
+/**
  * atc_dma_cyclic_check_values
  * Check for too big/unaligned periods and unaligned DMA buffer
  */
@@ -1461,8 +1608,10 @@ static int __init at_dma_probe(struct platform_device *pdev)
 
 	/* setup platform data for each SoC */
 	dma_cap_set(DMA_MEMCPY, at91sam9rl_config.cap_mask);
+	dma_cap_set(DMA_SG, at91sam9rl_config.cap_mask);
 	dma_cap_set(DMA_MEMCPY, at91sam9g45_config.cap_mask);
 	dma_cap_set(DMA_SLAVE, at91sam9g45_config.cap_mask);
+	dma_cap_set(DMA_SG, at91sam9g45_config.cap_mask);
 
 	/* get DMA parameters from controller type */
 	plat_dat = at_dma_get_driver_data(pdev);
@@ -1582,11 +1731,15 @@ static int __init at_dma_probe(struct platform_device *pdev)
 		atdma->dma_common.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
 	}
 
+	if (dma_has_cap(DMA_SG, atdma->dma_common.cap_mask))
+		atdma->dma_common.device_prep_dma_sg = atc_prep_dma_sg;
+
 	dma_writel(atdma, EN, AT_DMA_ENABLE);
 
-	dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s), %d channels\n",
+	dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s%s), %d channels\n",
 	  dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask) ? "cpy " : "",
 	  dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)  ? "slave " : "",
+	  dma_has_cap(DMA_SG, atdma->dma_common.cap_mask)  ? "sg-cpy " : "",
 	  plat_dat->nr_channels);
 
 	dma_async_device_register(&atdma->dma_common);
diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index d9891d3461f6..933e4b338459 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -1154,8 +1154,10 @@ static int at_xdmac_device_resume(struct dma_chan *chan)
 	dev_dbg(chan2dev(chan), "%s\n", __func__);
 
 	spin_lock_bh(&atchan->lock);
-	if (!at_xdmac_chan_is_paused(atchan))
+	if (!at_xdmac_chan_is_paused(atchan)) {
+		spin_unlock_bh(&atchan->lock);
 		return 0;
+	}
 
 	at_xdmac_write(atxdmac, AT_XDMAC_GRWR, atchan->mask);
 	clear_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status);
diff --git a/drivers/dma/bestcomm/bestcomm.c b/drivers/dma/bestcomm/bestcomm.c
index fa378d88f6c8..180fedb418cc 100644
--- a/drivers/dma/bestcomm/bestcomm.c
+++ b/drivers/dma/bestcomm/bestcomm.c
@@ -30,7 +30,7 @@
 #define DRIVER_NAME "bestcomm-core"
 
 /* MPC5200 device tree match tables */
-static struct of_device_id mpc52xx_sram_ids[] = {
+static const struct of_device_id mpc52xx_sram_ids[] = {
 	{ .compatible = "fsl,mpc5200-sram", },
 	{ .compatible = "mpc5200-sram", },
 	{}
@@ -481,7 +481,7 @@ static int mpc52xx_bcom_remove(struct platform_device *op)
 	return 0;
 }
 
-static struct of_device_id mpc52xx_bcom_of_match[] = {
+static const struct of_device_id mpc52xx_bcom_of_match[] = {
 	{ .compatible = "fsl,mpc5200-bestcomm", },
 	{ .compatible = "mpc5200-bestcomm", },
 	{},
diff --git a/drivers/dma/dma-jz4740.c b/drivers/dma/dma-jz4740.c
index 84884418fd30..7638b24ce8d0 100644
--- a/drivers/dma/dma-jz4740.c
+++ b/drivers/dma/dma-jz4740.c
@@ -7,10 +7,6 @@
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
  */
 
 #include <linux/dmaengine.h>
@@ -343,7 +339,7 @@ static void jz4740_dma_chan_irq(struct jz4740_dmaengine_chan *chan)
 {
 	spin_lock(&chan->vchan.lock);
 	if (chan->desc) {
-		if (chan->desc && chan->desc->cyclic) {
+		if (chan->desc->cyclic) {
 			vchan_cyclic_callback(&chan->desc->vdesc);
 		} else {
 			if (chan->next_sg == chan->desc->num_sgs) {
@@ -496,11 +492,6 @@ static enum dma_status jz4740_dma_tx_status(struct dma_chan *c,
 	return status;
 }
 
-static int jz4740_dma_alloc_chan_resources(struct dma_chan *c)
-{
-	return 0;
-}
-
 static void jz4740_dma_free_chan_resources(struct dma_chan *c)
 {
 	vchan_free_chan_resources(to_virt_chan(c));
@@ -543,7 +534,6 @@ static int jz4740_dma_probe(struct platform_device *pdev)
 
 	dma_cap_set(DMA_SLAVE, dd->cap_mask);
 	dma_cap_set(DMA_CYCLIC, dd->cap_mask);
-	dd->device_alloc_chan_resources = jz4740_dma_alloc_chan_resources;
 	dd->device_free_chan_resources = jz4740_dma_free_chan_resources;
 	dd->device_tx_status = jz4740_dma_tx_status;
 	dd->device_issue_pending = jz4740_dma_issue_pending;
diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
new file mode 100644
index 000000000000..26d2f0e09ea3
--- /dev/null
+++ b/drivers/dma/dma-jz4780.c
@@ -0,0 +1,877 @@
+/*
+ * Ingenic JZ4780 DMA controller
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex@alex-smith.me.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/dmapool.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_dma.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "dmaengine.h"
+#include "virt-dma.h"
+
+#define JZ_DMA_NR_CHANNELS	32
+
+/* Global registers. */
+#define JZ_DMA_REG_DMAC		0x1000
+#define JZ_DMA_REG_DIRQP	0x1004
+#define JZ_DMA_REG_DDR		0x1008
+#define JZ_DMA_REG_DDRS		0x100c
+#define JZ_DMA_REG_DMACP	0x101c
+#define JZ_DMA_REG_DSIRQP	0x1020
+#define JZ_DMA_REG_DSIRQM	0x1024
+#define JZ_DMA_REG_DCIRQP	0x1028
+#define JZ_DMA_REG_DCIRQM	0x102c
+
+/* Per-channel registers. */
+#define JZ_DMA_REG_CHAN(n)	(n * 0x20)
+#define JZ_DMA_REG_DSA(n)	(0x00 + JZ_DMA_REG_CHAN(n))
+#define JZ_DMA_REG_DTA(n)	(0x04 + JZ_DMA_REG_CHAN(n))
+#define JZ_DMA_REG_DTC(n)	(0x08 + JZ_DMA_REG_CHAN(n))
+#define JZ_DMA_REG_DRT(n)	(0x0c + JZ_DMA_REG_CHAN(n))
+#define JZ_DMA_REG_DCS(n)	(0x10 + JZ_DMA_REG_CHAN(n))
+#define JZ_DMA_REG_DCM(n)	(0x14 + JZ_DMA_REG_CHAN(n))
+#define JZ_DMA_REG_DDA(n)	(0x18 + JZ_DMA_REG_CHAN(n))
+#define JZ_DMA_REG_DSD(n)	(0x1c + JZ_DMA_REG_CHAN(n))
+
+#define JZ_DMA_DMAC_DMAE	BIT(0)
+#define JZ_DMA_DMAC_AR		BIT(2)
+#define JZ_DMA_DMAC_HLT		BIT(3)
+#define JZ_DMA_DMAC_FMSC	BIT(31)
+
+#define JZ_DMA_DRT_AUTO		0x8
+
+#define JZ_DMA_DCS_CTE		BIT(0)
+#define JZ_DMA_DCS_HLT		BIT(2)
+#define JZ_DMA_DCS_TT		BIT(3)
+#define JZ_DMA_DCS_AR		BIT(4)
+#define JZ_DMA_DCS_DES8		BIT(30)
+
+#define JZ_DMA_DCM_LINK		BIT(0)
+#define JZ_DMA_DCM_TIE		BIT(1)
+#define JZ_DMA_DCM_STDE		BIT(2)
+#define JZ_DMA_DCM_TSZ_SHIFT	8
+#define JZ_DMA_DCM_TSZ_MASK	(0x7 << JZ_DMA_DCM_TSZ_SHIFT)
+#define JZ_DMA_DCM_DP_SHIFT	12
+#define JZ_DMA_DCM_SP_SHIFT	14
+#define JZ_DMA_DCM_DAI		BIT(22)
+#define JZ_DMA_DCM_SAI		BIT(23)
+
+#define JZ_DMA_SIZE_4_BYTE	0x0
+#define JZ_DMA_SIZE_1_BYTE	0x1
+#define JZ_DMA_SIZE_2_BYTE	0x2
+#define JZ_DMA_SIZE_16_BYTE	0x3
+#define JZ_DMA_SIZE_32_BYTE	0x4
+#define JZ_DMA_SIZE_64_BYTE	0x5
+#define JZ_DMA_SIZE_128_BYTE	0x6
+
+#define JZ_DMA_WIDTH_32_BIT	0x0
+#define JZ_DMA_WIDTH_8_BIT	0x1
+#define JZ_DMA_WIDTH_16_BIT	0x2
+
+#define JZ_DMA_BUSWIDTHS	(BIT(DMA_SLAVE_BUSWIDTH_1_BYTE)	 | \
+				 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
+
+/**
+ * struct jz4780_dma_hwdesc - descriptor structure read by the DMA controller.
+ * @dcm: value for the DCM (channel command) register
+ * @dsa: source address
+ * @dta: target address
+ * @dtc: transfer count (number of blocks of the transfer size specified in DCM
+ * to transfer) in the low 24 bits, offset of the next descriptor from the
+ * descriptor base address in the upper 8 bits.
+ * @sd: target/source stride difference (in stride transfer mode).
+ * @drt: request type
+ */
+struct jz4780_dma_hwdesc {
+	uint32_t dcm;
+	uint32_t dsa;
+	uint32_t dta;
+	uint32_t dtc;
+	uint32_t sd;
+	uint32_t drt;
+	uint32_t reserved[2];
+};
+
+/* Size of allocations for hardware descriptor blocks. */
+#define JZ_DMA_DESC_BLOCK_SIZE	PAGE_SIZE
+#define JZ_DMA_MAX_DESC		\
+	(JZ_DMA_DESC_BLOCK_SIZE / sizeof(struct jz4780_dma_hwdesc))
+
+struct jz4780_dma_desc {
+	struct virt_dma_desc vdesc;
+
+	struct jz4780_dma_hwdesc *desc;
+	dma_addr_t desc_phys;
+	unsigned int count;
+	enum dma_transaction_type type;
+	uint32_t status;
+};
+
+struct jz4780_dma_chan {
+	struct virt_dma_chan vchan;
+	unsigned int id;
+	struct dma_pool *desc_pool;
+
+	uint32_t transfer_type;
+	uint32_t transfer_shift;
+	struct dma_slave_config	config;
+
+	struct jz4780_dma_desc *desc;
+	unsigned int curr_hwdesc;
+};
+
+struct jz4780_dma_dev {
+	struct dma_device dma_device;
+	void __iomem *base;
+	struct clk *clk;
+	unsigned int irq;
+
+	uint32_t chan_reserved;
+	struct jz4780_dma_chan chan[JZ_DMA_NR_CHANNELS];
+};
+
+struct jz4780_dma_data {
+	uint32_t transfer_type;
+	int channel;
+};
+
+static inline struct jz4780_dma_chan *to_jz4780_dma_chan(struct dma_chan *chan)
+{
+	return container_of(chan, struct jz4780_dma_chan, vchan.chan);
+}
+
+static inline struct jz4780_dma_desc *to_jz4780_dma_desc(
+	struct virt_dma_desc *vdesc)
+{
+	return container_of(vdesc, struct jz4780_dma_desc, vdesc);
+}
+
+static inline struct jz4780_dma_dev *jz4780_dma_chan_parent(
+	struct jz4780_dma_chan *jzchan)
+{
+	return container_of(jzchan->vchan.chan.device, struct jz4780_dma_dev,
+			    dma_device);
+}
+
+static inline uint32_t jz4780_dma_readl(struct jz4780_dma_dev *jzdma,
+	unsigned int reg)
+{
+	return readl(jzdma->base + reg);
+}
+
+static inline void jz4780_dma_writel(struct jz4780_dma_dev *jzdma,
+	unsigned int reg, uint32_t val)
+{
+	writel(val, jzdma->base + reg);
+}
+
+static struct jz4780_dma_desc *jz4780_dma_desc_alloc(
+	struct jz4780_dma_chan *jzchan, unsigned int count,
+	enum dma_transaction_type type)
+{
+	struct jz4780_dma_desc *desc;
+
+	if (count > JZ_DMA_MAX_DESC)
+		return NULL;
+
+	desc = kzalloc(sizeof(*desc), GFP_NOWAIT);
+	if (!desc)
+		return NULL;
+
+	desc->desc = dma_pool_alloc(jzchan->desc_pool, GFP_NOWAIT,
+				    &desc->desc_phys);
+	if (!desc->desc) {
+		kfree(desc);
+		return NULL;
+	}
+
+	desc->count = count;
+	desc->type = type;
+	return desc;
+}
+
+static void jz4780_dma_desc_free(struct virt_dma_desc *vdesc)
+{
+	struct jz4780_dma_desc *desc = to_jz4780_dma_desc(vdesc);
+	struct jz4780_dma_chan *jzchan = to_jz4780_dma_chan(vdesc->tx.chan);
+
+	dma_pool_free(jz