Merge tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver update from Greg KH:
 "Here's the big tty/serial driver update for 3.15-rc1.

  Nothing major, a number of serial driver updates and a few tty core
  fixes as well.

  All have been in linux-next for a while"

* tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits)
  tty/serial: omap: empty the RX FIFO at the end of half-duplex TX
  tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX
  serial: sh-sci: Neaten dev_<level> uses
  serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF
  serial: sh-sci: Add more register documentation
  serial: sh-sci: Remove useless casts
  serial: sh-sci: Replace printk() by pr_*()
  serial_core: Avoid NULL pointer dereference in uart_close()
  serial_core: Get a reference for port->tty in uart_remove_one_port()
  serial: clps711x: Give a chance to perform useful tasks during wait loop
  serial_core: Grammar s/ports/port's/
  serial_core: Spelling s/contro/control/
  serial: efm32: properly namespace location property
  serial: max310x: Add missing #include <linux/uaccess.h>
  synclink: fix info leak in ioctl
  serial: 8250: Clean up the locking for -rt
  serial: 8250_pci: change BayTrail default uartclk
  serial: 8250_pci: more BayTrail error-free bauds
  serial: sh-sci: Add missing call to uart_remove_one_port() in failure path
  serial_core: Unregister console in uart_remove_one_port()
  ...

30 files changed, 1092 insertions, 703 deletions

diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 50b46881b6ca..94f9e3a38412 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -31,6 +31,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/major.h>
+#include <linux/atomic.h>
 #include <linux/sysrq.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
@@ -70,6 +71,9 @@ static struct task_struct *hvc_task;
 /* Picks up late kicks after list walk but before schedule() */
 static int hvc_kicked;
 
+/* hvc_init is triggered from hvc_alloc, i.e. only when actually used */
+static atomic_t hvc_needs_init __read_mostly = ATOMIC_INIT(-1);
+
 static int hvc_init(void);
 
 #ifdef CONFIG_MAGIC_SYSRQ
@@ -851,7 +855,7 @@ struct hvc_struct *hvc_alloc(uint32_t vtermno, int data,
 	int i;
 
 	/* We wait until a driver actually comes along */
-	if (!hvc_driver) {
+	if (atomic_inc_not_zero(&hvc_needs_init)) {
 		int err = hvc_init();
 		if (err)
 			return ERR_PTR(err);
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index ebd5bff0f5c1..17ee3bf0926b 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -176,9 +176,6 @@ void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data,
 				": %d chars not inserted to flip buffer!\n",
 				length - work);
 
-	/*
-	 * This may sleep if ->low_latency is set
-	 */
 	if (work)
 		tty_flip_buffer_push(&tty->port);
 }
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d15624c1b751..41fe8a047d37 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1900,13 +1900,10 @@ static inline int input_available_p(struct tty_struct *tty, int poll)
 	struct n_tty_data *ldata = tty->disc_data;
 	int amt = poll && !TIME_CHAR(tty) && MIN_CHAR(tty) ? MIN_CHAR(tty) : 1;
 
-	if (ldata->icanon && !L_EXTPROC(tty)) {
-		if (ldata->canon_head != ldata->read_tail)
-			return 1;
-	} else if (read_cnt(ldata) >= amt)
-		return 1;
-
-	return 0;
+	if (ldata->icanon && !L_EXTPROC(tty))
+		return ldata->canon_head != ldata->read_tail;
+	else
+		return read_cnt(ldata) >= amt;
 }
 
 /**
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 69932b7556cf..81f909c2101f 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1694,6 +1694,10 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
 
 static void serial_unlink_irq_chain(struct uart_8250_port *up)
 {
+	/*
+	 * yes, some broken gcc emit "warning: 'i' may be used uninitialized"
+	 * but no, we are not going to take a patch that assigns NULL below.
+	 */
 	struct irq_info *i;
 	struct hlist_node *n;
 	struct hlist_head *h;
@@ -2882,14 +2886,10 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 
 	touch_nmi_watchdog();
 
-	local_irq_save(flags);
-	if (port->sysrq) {
-		/* serial8250_handle_irq() already took the lock */
-		locked = 0;
-	} else if (oops_in_progress) {
-		locked = spin_trylock(&port->lock);
-	} else
-		spin_lock(&port->lock);
+	if (port->sysrq || oops_in_progress)
+		locked = spin_trylock_irqsave(&port->lock, flags);
+	else
+		spin_lock_irqsave(&port->lock, flags);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -2921,8 +2921,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 		serial8250_modem_status(up);
 
 	if (locked)
-		spin_unlock(&port->lock);
-	local_irq_restore(flags);
+		spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static int __init serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 0ff3e3624d4c..b14bcba96c25 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1366,23 +1366,44 @@ byt_set_termios(struct uart_port *p, struct ktermios *termios,
 		struct ktermios *old)
 {
 	unsigned int baud = tty_termios_baud_rate(termios);
-	unsigned int m = 6912;
-	unsigned int n = 15625;
+	unsigned int m, n;
 	u32 reg;
 
-	/* For baud rates 1M, 2M, 3M and 4M the dividers must be adjusted. */
-	if (baud == 1000000 || baud == 2000000 || baud == 4000000) {
+	/*
+	 * For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the
+	 * dividers must be adjusted.
+	 *
+	 * uartclk = (m / n) * 100 MHz, where m <= n
+	 */
+	switch (baud) {
+	case 500000:
+	case 1000000:
+	case 2000000:
+	case 4000000:
 		m = 64;
 		n = 100;
-
 		p->uartclk = 64000000;
-	} else if (baud == 3000000) {
+		break;
+	case 3500000:
+		m = 56;
+		n = 100;
+		p->uartclk = 56000000;
+		break;
+	case 1500000:
+	case 3000000:
 		m = 48;
 		n = 100;
-
 		p->uartclk = 48000000;
-	} else {
-		p->uartclk = 44236800;
+		break;
+	case 2500000:
+		m = 40;
+		n = 100;
+		p->uartclk = 40000000;
+		break;
+	default:
+		m = 2304;
+		n = 3125;
+		p->uartclk = 73728000;
 	}
 
 	/* Reset the clock */
@@ -3449,6 +3470,10 @@ static struct pciserial_board pci_boards[] = {
 		.base_baud	= 921600,
 		.reg_shift      = 2,
 	},
+	/*
+	 * Intel BayTrail HSUART reference clock is 44.2368 MHz at power-on,
+	 * but is overridden by byt_set_termios.
+	 */
 	[pbn_byt] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 1,
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a3815eaed421..2577d67bacb2 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -289,7 +289,7 @@ config SERIAL_MAX3100
 	  MAX3100 chip support
 
 config SERIAL_MAX310X
-	bool "MAX310X support"
+	tristate "MAX310X support"
 	depends on SPI_MASTER
 	select SERIAL_CORE
 	select REGMAP_SPI if SPI_MASTER
@@ -708,7 +708,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
 
 config SERIAL_SH_SCI
 	tristate "SuperH SCI(F) serial port support"
-	depends on HAVE_CLK && (SUPERH || ARM || COMPILE_TEST)
+	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
 	select SERIAL_CORE
 
 config SERIAL_SH_SCI_NR_UARTS
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d58783d364e3..d4eda24aa68b 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2154,9 +2154,19 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	amba_ports[i] = uap;
 
 	amba_set_drvdata(dev, uap);
+
+	if (!amba_reg.state) {
+		ret = uart_register_driver(&amba_reg);
+		if (ret < 0) {
+			pr_err("Failed to register AMBA-PL011 driver\n");
+			return ret;
+		}
+	}
+
 	ret = uart_add_one_port(&amba_reg, &uap->port);
 	if (ret) {
 		amba_ports[i] = NULL;
+		uart_unregister_driver(&amba_reg);
 		pl011_dma_remove(uap);
 	}
  out:
@@ -2175,6 +2185,7 @@ static int pl011_remove(struct amba_device *dev)
 			amba_ports[i] = NULL;
 
 	pl011_dma_remove(uap);
+	uart_unregister_driver(&amba_reg);
 	return 0;
 }
 
@@ -2230,22 +2241,14 @@ static struct amba_driver pl011_driver = {
 
 static int __init pl011_init(void)
 {
-	int ret;
 	printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
 
-	ret = uart_register_driver(&amba_reg);
-	if (ret == 0) {
-		ret = amba_driver_register(&pl011_driver);
-		if (ret)
-			uart_unregister_driver(&amba_reg);
-	}
-	return ret;
+	return amba_driver_register(&pl011_driver);
 }
 
 static void __exit pl011_exit(void)
 {
 	amba_driver_unregister(&pl011_driver);
-	uart_unregister_driver(&amba_reg);
 }
 
 /*
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index a49f10d269b2..b0603e1f7d82 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -115,9 +115,6 @@ static void atmel_stop_rx(struct uart_port *port);
 #define UART_PUT_TCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
 #define UART_GET_TCR(port)	__raw_readl((port)->membase + ATMEL_PDC_TCR)
 
-static int (*atmel_open_hook)(struct uart_port *);
-static void (*atmel_close_hook)(struct uart_port *);
-
 struct atmel_dma_buffer {
 	unsigned char	*buf;
 	dma_addr_t	dma_addr;
@@ -1555,7 +1552,7 @@ static int atmel_startup(struct uart_port *port)
 	retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
 			tty ? tty->name : "atmel_serial", port);
 	if (retval) {
-		printk("atmel_serial: atmel_startup - Can't get irq\n");
+		dev_err(port->dev, "atmel_startup - Can't get irq\n");
 		return retval;
 	}
 
@@ -1575,17 +1572,6 @@ static int atmel_startup(struct uart_port *port)
 		if (retval < 0)
 			atmel_set_ops(port);
 	}
-	/*
-	 * If there is a specific "open" function (to register
-	 * control line interrupts)
-	 */
-	if (atmel_open_hook) {
-		retval = atmel_open_hook(port);
-		if (retval) {
-			free_irq(port->irq, port);
-			return retval;
-		}
-	}
 
 	/* Save current CSR for comparison in atmel_tasklet_func() */
 	atmel_port->irq_status_prev = UART_GET_CSR(port);
@@ -1684,13 +1670,6 @@ static void atmel_shutdown(struct uart_port *port)
 	 * Free the interrupt
 	 */
 	free_irq(port->irq, port);
-
-	/*
-	 * If there is a specific "close" function (to unregister
-	 * control line interrupts)
-	 */
-	if (atmel_close_hook)
-		atmel_close_hook(port);
 }
 
 /*
@@ -1738,7 +1717,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
 		clk_disable_unprepare(atmel_port->clk);
 		break;
 	default:
-		printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
+		dev_err(port->dev, "atmel_serial: unknown pm %d\n", state);
 	}
 }
 
@@ -1853,13 +1832,10 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	mode &= ~ATMEL_US_USMODE;
 
 	if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
-		dev_dbg(port->dev, "Setting UART to RS485\n");
 		if ((atmel_port->rs485.delay_rts_after_send) > 0)
 			UART_PUT_TTGR(port,
 					atmel_port->rs485.delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
-	} else {
-		dev_dbg(port->dev, "Setting UART to RS232\n");
 	}
 
 	/* set the parity, stop bits and data size */
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 78e82b017b92..a47421e4627c 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -30,6 +30,8 @@
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/serial_bcm63xx.h>
+#include <linux/io.h>
+#include <linux/of.h>
 
 #define BCM63XX_NR_UARTS	2
 
@@ -588,7 +590,7 @@ static int bcm_uart_request_port(struct uart_port *port)
 {
 	unsigned int size;
 
-	size = RSET_UART_SIZE;
+	size = UART_REG_SIZE;
 	if (!request_mem_region(port->mapbase, size, "bcm63xx")) {
 		dev_err(port->dev, "Memory region busy\n");
 		return -EBUSY;
@@ -608,7 +610,7 @@ static int bcm_uart_request_port(struct uart_port *port)
  */
 static void bcm_uart_release_port(struct uart_port *port)
 {
-	release_mem_region(port->mapbase, RSET_UART_SIZE);
+	release_mem_region(port->mapbase, UART_REG_SIZE);
 	iounmap(port->membase);
 }
 
@@ -805,6 +807,9 @@ static int bcm_uart_probe(struct platform_device *pdev)
 	struct clk *clk;
 	int ret;
 
+	if (pdev->dev.of_node)
+		pdev->id = of_alias_get_id(pdev->dev.of_node, "uart");
+
 	if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS)
 		return -EINVAL;
 
@@ -856,6 +861,12 @@ static int bcm_uart_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id bcm63xx_of_match[] = {
+	{ .compatible = "brcm,bcm6345-uart" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, bcm63xx_of_match);
+
 /*
  * platform driver stuff
  */
@@ -865,6 +876,7 @@ static struct platform_driver bcm_uart_platform_driver = {
 	.driver	= {
 		.owner = THIS_MODULE,
 		.name  = "bcm63xx_uart",
+		.of_match_table = bcm63xx_of_match,
 	},
 };
 
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index b0eacb83f831..5e6fdb1ea73b 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -368,11 +368,16 @@ static const struct uart_ops uart_clps711x_ops = {
 static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
 {
 	struct clps711x_port *s = dev_get_drvdata(port->dev);
-	u32 sysflg = 0;
 
-	do {
+	/* Wait for FIFO is not full */
+	while (1) {
+		u32 sysflg = 0;
+
 		regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
-	} while (sysflg & SYSFLG_UTXFF);
+		if (!(sysflg & SYSFLG_UTXFF))
+			break;
+		cond_resched();
+	}
 
 	writew(ch, port->membase + UARTDR_OFFSET);
 }
@@ -382,14 +387,18 @@ static void uart_clps711x_console_write(struct console *co, const char *c,
 {
 	struct uart_port *port = clps711x_uart.state[co->index].uart_port;
 	struct clps711x_port *s = dev_get_drvdata(port->dev);
-	u32 sysflg = 0;
 
 	uart_console_write(port, c, n, uart_clps711x_console_putchar);
 
 	/* Wait for transmitter to become empty */
-	do {
+	while (1) {
+		u32 sysflg = 0;
+
 		regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
-	} while (sysflg & SYSFLG_UBUSY);
+		if (!(sysflg & SYSFLG_UBUSY))
+			break;
+		cond_resched();
+	}
 }
 
 static int uart_clps711x_console_setup(struct console *co, char *options)
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 690bdea0a0c1..d567ac5d3af4 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -286,7 +286,6 @@ static struct e100_serial rs_table[] = {
 #endif
 
 },  /* ttyS0 */
-#ifndef CONFIG_SVINTO_SIM
 	{ .baud        = DEF_BAUD,
 	  .ioport        = (unsigned char *)R_SERIAL1_CTRL,
 	  .irq         = 1U << 16, /* uses DMA 8 and 9 */
@@ -447,7 +446,6 @@ static struct e100_serial rs_table[] = {
 	  .dma_in_enabled = 0
 #endif
  }   /* ttyS3 */
-#endif
 };
 
 
@@ -1035,7 +1033,6 @@ cflag_to_etrax_baud(unsigned int cflag)
 static inline void
 e100_dtr(struct e100_serial *info, int set)
 {
-#ifndef CONFIG_SVINTO_SIM
 	unsigned char mask = e100_modem_pins[info->line].dtr_mask;
 
 #ifdef SERIAL_DEBUG_IO
@@ -1060,7 +1057,6 @@ e100_dtr(struct e100_serial *info, int set)
 	       info->line, *e100_modem_pins[info->line].dtr_shadow,
 	       E100_DTR_GET(info));
 #endif
-#endif
 }
 
 /* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive
@@ -1069,7 +1065,6 @@ e100_dtr(struct e100_serial *info, int set)
 static inline void
 e100_rts(struct e100_serial *info, int set)
 {
-#ifndef CONFIG_SVINTO_SIM
 	unsigned long flags;
 	local_irq_save(flags);
 	info->rx_ctrl &= ~E100_RTS_MASK;
@@ -1079,7 +1074,6 @@ e100_rts(struct e100_serial *info, int set)
 #ifdef SERIAL_DEBUG_IO
 	printk("ser%i rts %i\n", info->line, set);
 #endif
-#endif
 }
 
 
@@ -1087,7 +1081,6 @@ e100_rts(struct e100_serial *info, int set)
 static inline void
 e100_ri_out(struct e100_serial *info, int set)
 {
-#ifndef CONFIG_SVINTO_SIM
 	/* RI is active low */
 	{
 		unsigned char mask = e100_modem_pins[info->line].ri_mask;
@@ -1099,12 +1092,10 @@ e100_ri_out(struct e100_serial *info, int set)
 		*e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow;
 		local_irq_restore(flags);
 	}
-#endif
 }
 static inline void
 e100_cd_out(struct e100_serial *info, int set)
 {
-#ifndef CONFIG_SVINTO_SIM
 	/* CD is active low */
 	{
 		unsigned char mask = e100_modem_pins[info->line].cd_mask;
@@ -1116,27 +1107,22 @@ e100_cd_out(struct e100_serial *info, int set)
 		*e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow;
 		local_irq_restore(flags);
 	}
-#endif
 }
 
 static inline void
 e100_disable_rx(struct e100_serial *info)
 {
-#ifndef CONFIG_SVINTO_SIM
 	/* disable the receiver */
 	info->ioport[REG_REC_CTRL] =
 		(info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
-#endif
 }
 
 static inline void
 e100_enable_rx(struct e100_serial *info)
 {
-#ifndef CONFIG_SVINTO_SIM
 	/* enable the receiver */
 	info->ioport[REG_REC_CTRL] =
 		(info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
-#endif
 }
 
 /* the rx DMA uses both the dma_descr and the dma_eop interrupts */
@@ -1554,24 +1540,6 @@ transmit_chars_dma(struct e100_serial *info)
 	unsigned int c, sentl;
 	struct etrax_dma_descr *descr;
 
-#ifdef CONFIG_SVINTO_SIM
-	/* This will output too little if tail is not 0 always since
-	 * we don't reloop to send the other part. Anyway this SHOULD be a
-	 * no-op - transmit_chars_dma would never really be called during sim
-	 * since rs_write does not write into the xmit buffer then.
-	 */
-	if (info->xmit.tail)
-		printk("Error in serial.c:transmit_chars-dma(), tail!=0\n");
-	if (info->xmit.head != info->xmit.tail) {
-		SIMCOUT(info->xmit.buf + info->xmit.tail,
-			CIRC_CNT(info->xmit.head,
-				 info->xmit.tail,
-				 SERIAL_XMIT_SIZE));
-		info->xmit.head = info->xmit.tail;  /* move back head */
-		info->tr_running = 0;
-	}
-	return;
-#endif
 	/* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
 	*info->oclrintradr =
 		IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
@@ -1842,13 +1810,6 @@ static void receive_chars_dma(struct e100_serial *info)
 	struct tty_struct *tty;
 	unsigned char rstat;
 
-#ifdef CONFIG_SVINTO_SIM
-	/* No receive in the simulator.  Will probably be when the rest of
-	 * the serial interface works, and this piece will just be removed.
-	 */
-	return;
-#endif
-
 	/* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
 	*info->iclrintradr =
 		IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
@@ -1934,12 +1895,6 @@ static int start_recv_dma(struct e100_serial *info)
 static void
 start_receive(struct e100_serial *info)
 {
-#ifdef CONFIG_SVINTO_SIM
-	/* No receive in the simulator.  Will probably be when the rest of
-	 * the serial interface works, and this piece will just be removed.
-	 */
-	return;
-#endif
 	if (info->uses_dma_in) {
 		/* reset the input dma channel to be sure it works */
 
@@ -1972,17 +1927,6 @@ tr_interrupt(int irq, void *dev_id)
 	int i;
 	int handled = 0;
 
-#ifdef CONFIG_SVINTO_SIM
-	/* No receive in the simulator.  Will probably be when the rest of
-	 * the serial interface works, and this piece will just be removed.
-	 */
-	{
-		const char *s = "What? tr_interrupt in simulator??\n";
-		SIMCOUT(s,strlen(s));
-	}
-	return IRQ_HANDLED;
-#endif
-
 	/* find out the line that caused this irq and get it from rs_table */
 
 	ireg = *R_IRQ_MASK2_RD;  /* get the active irq bits for the dma channels */
@@ -2021,17 +1965,6 @@ rec_interrupt(int irq, void *dev_id)
 	int i;
 	int handled = 0;
 
-#ifdef CONFIG_SVINTO_SIM
-	/* No receive in the simulator.  Will probably be when the rest of
-	 * the serial interface works, and this piece will just be removed.
-	 */
-	{
-		const char *s = "What? rec_interrupt in simulator??\n";
-		SIMCOUT(s,strlen(s));
-	}
-	return IRQ_HANDLED;
-#endif
-
 	/* find out the line that caused this irq and get it from rs_table */
 
 	ireg = *R_IRQ_MASK2_RD;  /* get the active irq bits for the dma channels */
@@ -2173,10 +2106,6 @@ timed_flush_handler(unsigned long ptr)
 	struct e100_serial *info;
 	int i;
 
-#ifdef CONFIG_SVINTO_SIM
-	return;
-#endif
-
 	for (i = 0; i < NR_PORTS; i++) {
 		info = rs_table + i;
 		if (info->uses_dma_in)
@@ -2729,25 +2658,6 @@ startup(struct e100_serial * info)
 	printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf);
 #endif
 
-#ifdef CONFIG_SVINTO_SIM
-	/* Bits and pieces collected from below.  Better to have them
-	   in one ifdef:ed clause than to mix in a lot of ifdefs,
-	   right? */
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
-	info->xmit.head = info->xmit.tail = 0;
-	info->first_recv_buffer = info->last_recv_buffer = NULL;
-	info->recv_cnt = info->max_recv_cnt = 0;
-
-	for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
-		info->rec_descr[i].buf = NULL;
-
-	/* No real action in the simulator, but may set info important
-	   to ioctl. */
-	change_speed(info);
-#else
-
 	/*
 	 * Clear the FIFO buffers and disable them
 	 * (they will be reenabled in change_speed())
@@ -2837,8 +2747,6 @@ startup(struct e100_serial * info)
 	e100_rts(info, 1);
 	e100_dtr(info, 1);
 
-#endif /* CONFIG_SVINTO_SIM */
-
 	info->port.flags |= ASYNC_INITIALIZED;
 
 	local_irq_restore(flags);
@@ -2857,7 +2765,6 @@ shutdown(struct e100_serial * info)
 	struct etrax_recv_buffer *buffer;
 	int i;
 
-#ifndef CONFIG_SVINTO_SIM
 	/* shut down the transmitter and receiver */
 	DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line));
 	e100_disable_rx(info);
@@ -2882,8 +2789,6 @@ shutdown(struct e100_serial * info)
 		info->tr_running = 0;
 	}
 
-#endif /* CONFIG_SVINTO_SIM */
-
 	if (!(info->port.flags & ASYNC_INITIALIZED))
 		return;
 
@@ -2995,17 +2900,12 @@ change_speed(struct e100_serial *info)
 			IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal);
 		r_alt_ser_baudrate_shadow &= ~mask;
 		r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8));
-#ifndef CONFIG_SVINTO_SIM
 		*R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow;
-#endif /* CONFIG_SVINTO_SIM */
 
 		info->baud = cflag_to_baud(cflag);
-#ifndef CONFIG_SVINTO_SIM
 		info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag);
-#endif /* CONFIG_SVINTO_SIM */
 	}
 
-#ifndef CONFIG_SVINTO_SIM
 	/* start with default settings and then fill in changes */
 	local_irq_save(flags);
 	/* 8 bit, no/even parity */
@@ -3073,7 +2973,6 @@ change_speed(struct e100_serial *info)
 
 	*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
 	local_irq_restore(flags);
-#endif /* !CONFIG_SVINTO_SIM */
 
 	update_char_time(info);
 
@@ -3122,11 +3021,6 @@ static int rs_raw_write(struct tty_struct *tty,
 		       count, info->ioport[REG_STATUS]);
 #endif
 
-#ifdef CONFIG_SVINTO_SIM
-	/* Really simple.  The output is here and now. */
-	SIMCOUT(buf, count);
-	return count;
-#endif
 	local_save_flags(flags);
 	DFLOW(DEBUG_LOG(info->line, "write count %i ", count));
 	DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty)));
@@ -3463,7 +3357,6 @@ static int
 get_lsr_info(struct e100_serial * info, unsigned int *value)
 {
 	unsigned int result = TIOCSER_TEMT;
-#ifndef CONFIG_SVINTO_SIM
 	unsigned long curr_time = jiffies;
 	unsigned long curr_time_usec = GET_JIFFIES_USEC();
 	unsigned long elapsed_usec =
@@ -3474,7 +3367,6 @@ get_lsr_info(struct e100_serial * info, unsigned int *value)
 	    elapsed_usec < 2*info->char_time_usec) {
 		result = 0;
 	}
-#endif
 
 	if (copy_to_user(value, &result, sizeof(int)))
 		return -EFAULT;
@@ -3804,7 +3696,6 @@ rs_close(struct tty_struct *tty, struct file * filp)
 	e100_disable_serial_data_irq(info);
 #endif
 
-#ifndef CONFIG_SVINTO_SIM
 	e100_disable_rx(info);
 	e100_disable_rx_irq(info);
 
@@ -3816,7 +3707,6 @@ rs_close(struct tty_struct *tty, struct file * filp)
 		 */
 		rs_wait_until_sent(tty, HZ);
 	}
-#endif
 
 	shutdown(info);
 	rs_flush_buffer(tty);
@@ -4479,7 +4369,6 @@ static int __init rs_init(void)
 	fast_timer_init();
 #endif
 
-#ifndef CONFIG_SVINTO_SIM
 #ifndef CONFIG_ETRAX_KGDB
 	/* Not needed in simulator.  May only complicate stuff. */
 	/* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
@@ -4489,7 +4378,6 @@ static int __init rs_init(void)
 		panic("%s: Failed to request irq8", __func__);
 
 #endif
-#endif /* CONFIG_SVINTO_SIM */
 
 	return 0;
 }
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index 0eb5b5673ede..028582e924a5 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -671,7 +671,10 @@ static int efm32_uart_probe_dt(struct platform_device *pdev,
 	if (!np)
 		return 1;
 
-	ret = of_property_read_u32(np, "location", &location);
+	ret = of_property_read_u32(np, "efm32,location", &location);
+	if (ret)
+		/* fall back to old and (wrongly) generic property "location" */
+		ret = of_property_read_u32(np, "location", &location);
 	if (!ret) {
 		if (location > 5) {
 			dev_err(&pdev->dev, "invalid location\n");
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 8978dc9a58b7..c5eb897de9de 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -13,14 +13,19 @@
 #define SUPPORT_SYSRQ
 #endif
 
-#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/clk.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/console.h>
+#include <linux/of_dma.h>
 #include <linux/serial_core.h>
+#include <linux/slab.h>
 #include <linux/tty_flip.h>
 
 /* All registers are 8-bit width */
@@ -112,6 +117,10 @@
 #define UARTSFIFO_TXOF		0x02
 #define UARTSFIFO_RXUF		0x01
 
+#define DMA_MAXBURST		16
+#define DMA_MAXBURST_MASK	(DMA_MAXBURST - 1)
+#define FSL_UART_RX_DMA_BUFFER_SIZE	64
+
 #defi