diff options
author | Arnd Bergmann <arnd@arndb.de> | 2012-04-30 23:49:49 +0200 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2012-04-30 23:53:58 +0200 |
commit | ca731a5da08926f669360342bcad50353fbe141a (patch) | |
tree | 670a546ca3accd4647d46a6b5c90a6b067fb7a0a /drivers | |
parent | 989b7135666c464d90e296752802b2f37d168588 (diff) | |
parent | c0af14d3212a54c6a11759cd6b78e755c68714a1 (diff) |
Merge branch 'ux500-gpio-pins-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/gpio
Linus Walleij <linus.walleij@linaro.org> writes:
This is a pull request for the GPIO and pin control stuff
accumulated in the ST-Ericsson tree. Here we have:
- Improvements and fixes and a custom pin config API from
Rabin Vincent
- Device Tree bindings from Lee Jones
- Some accumulated patches by yours truly.
- A MSP platform data init patch from Ola Lilja that is merged
here due to dependency on pin config work. It is to be
used with work being worked on in parallel in the ALSA
SoC subsystem.
If you wonder about the custom pin config implementation this
is to be used as a transition base as I am rewriting the
driver to use pinctrl. Expect a final pull request on top
of this one that will move the ux500 over to pinctrl.
* 'ux500-gpio-pins-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: Add support for MSP I2S-devices
drivers/gpio: gpio-nomadik: Add support for irqdomains
drivers/gpio: gpio-nomadik: Apply Device Tree bindings
ARM: ux500: update pin handling
ARM: ux500: implement pin API
ARM: ux500: remove a bunch of internal pull-ups
plat-nomadik: new sleep mode pincfg macros
gpio/nomadik: use ioremap() instead of static mappings
gpio/nomadik: support low EMI mode
gpio/nomadik: fix spurious interrupts with SKE
gpio/nomadik: cache [rf]w?imsc
gpio/nomadik: don't set SLPM to 1 for non-wakeup pins
Also includes an update to v3.4-rc4.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers')
102 files changed, 1002 insertions, 551 deletions
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index ab513a972c95..a716fede4f25 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -74,7 +74,8 @@ acpi_status acpi_reset(void) /* Check if the reset register is supported */ - if (!reset_reg->address) { + if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) || + !reset_reg->address) { return_ACPI_STATUS(AE_NOT_EXIST); } diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index ba14fb93c929..c3881b2eb8b2 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -607,8 +607,7 @@ acpi_os_install_interrupt_handler(u32 gsi, acpi_osd_handler handler, acpi_irq_handler = handler; acpi_irq_context = context; - if (request_threaded_irq(irq, NULL, acpi_irq, IRQF_SHARED, "acpi", - acpi_irq)) { + if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) { printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq); acpi_irq_handler = NULL; return AE_NOT_ACQUIRED; diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c index c1d612435939..a6c77e8b37bd 100644 --- a/drivers/acpi/reboot.c +++ b/drivers/acpi/reboot.c @@ -23,7 +23,8 @@ void acpi_reboot(void) /* Is the reset register supported? The spec says we should be * checking the bit width and bit offset, but Windows ignores * these fields */ - /* Ignore also acpi_gbl_FADT.flags.ACPI_FADT_RESET_REGISTER */ + if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER)) + return; reset_value = acpi_gbl_FADT.reset_value; diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 68013f96729f..7857e8fd0a3e 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -329,6 +329,8 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (Lynx Point) */ { 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (DH89xxCC) */ + { 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, { } /* terminate list */ }; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e0bda9ff89cd..28db50b57b91 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -95,7 +95,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev); static void ata_dev_xfermask(struct ata_device *dev); static unsigned long ata_dev_blacklisted(const struct ata_device *dev); -unsigned int ata_print_id = 1; +atomic_t ata_print_id = ATOMIC_INIT(1); struct ata_force_param { const char *name; @@ -6029,7 +6029,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) /* give ports names and add SCSI hosts */ for (i = 0; i < host->n_ports; i++) - host->ports[i]->print_id = ata_print_id++; + host->ports[i]->print_id = atomic_inc_return(&ata_print_id); /* Create associated sysfs transport objects */ diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 1ee00c8b5b04..93dabdcd2cbe 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3843,7 +3843,7 @@ int ata_sas_async_port_init(struct ata_port *ap) int rc = ap->ops->port_start(ap); if (!rc) { - ap->print_id = ata_print_id++; + ap->print_id = atomic_inc_return(&ata_print_id); __ata_port_probe(ap); } @@ -3867,7 +3867,7 @@ int ata_sas_port_init(struct ata_port *ap) int rc = ap->ops->port_start(ap); if (!rc) { - ap->print_id = ata_print_id++; + ap->print_id = atomic_inc_return(&ata_print_id); rc = ata_port_probe(ap); } diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c index 74aaee30e264..c34190485377 100644 --- a/drivers/ata/libata-transport.c +++ b/drivers/ata/libata-transport.c @@ -294,6 +294,7 @@ int ata_tport_add(struct device *parent, device_enable_async_suspend(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); + pm_runtime_forbid(dev); transport_add_device(dev); transport_configure_device(dev); diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 2e26fcaf635b..9d0fd0b71852 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -53,7 +53,7 @@ enum { ATA_DNXFER_QUIET = (1 << 31), }; -extern unsigned int ata_print_id; +extern atomic_t ata_print_id; extern int atapi_passthru16; extern int libata_fua; extern int libata_noacpi; diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 38950ea8398a..7336d4a7ab31 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4025,7 +4025,8 @@ static int mv_platform_probe(struct platform_device *pdev) struct ata_host *host; struct mv_host_priv *hpriv; struct resource *res; - int n_ports, rc; + int n_ports = 0; + int rc; ata_print_version_once(&pdev->dev, DRV_VERSION); diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 0e4ef3de9d5d..0d39f2f4294a 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -375,6 +375,34 @@ static int init_vq(struct virtio_blk *vblk) return err; } +/* + * Legacy naming scheme used for virtio devices. We are stuck with it for + * virtio blk but don't ever use it for any new driver. + */ +static int virtblk_name_format(char *prefix, int index, char *buf, int buflen) +{ + const int base = 'z' - 'a' + 1; + char *begin = buf + strlen(prefix); + char *end = buf + buflen; + char *p; + int unit; + + p = end - 1; + *p = '\0'; + unit = base; + do { + if (p == begin) + return -EINVAL; + *--p = 'a' + (index % unit); + index = (index / unit) - 1; + } while (index >= 0); + + memmove(begin, p, end - p); + memcpy(buf, prefix, strlen(prefix)); + + return 0; +} + static int __devinit virtblk_probe(struct virtio_device *vdev) { struct virtio_blk *vblk; @@ -443,18 +471,7 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) q->queuedata = vblk; - if (index < 26) { - sprintf(vblk->disk->disk_name, "vd%c", 'a' + index % 26); - } else if (index < (26 + 1) * 26) { - sprintf(vblk->disk->disk_name, "vd%c%c", - 'a' + index / 26 - 1, 'a' + index % 26); - } else { - const unsigned int m1 = (index / 26 - 1) / 26 - 1; - const unsigned int m2 = (index / 26 - 1) % 26; - const unsigned int m3 = index % 26; - sprintf(vblk->disk->disk_name, "vd%c%c%c", - 'a' + m1, 'a' + m2, 'a' + m3); - } + virtblk_name_format("vd", index, vblk->disk->disk_name, DISK_NAME_LEN); vblk->disk->major = major; vblk->disk->first_minor = index_to_minor(index); diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 89860f34a7ec..4f66171c6683 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -416,7 +416,7 @@ static void xen_blkbk_discard(struct xenbus_transaction xbt, struct backend_info "discard-secure", "%d", blkif->vbd.discard_secure); if (err) { - dev_warn(dev-dev, "writing discard-secure (%d)", err); + dev_warn(&dev->dev, "writing discard-secure (%d)", err); return; } } diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index 0053d7ebb5ca..8f3f74ce8c7f 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -18,6 +18,7 @@ #include <linux/interrupt.h> #include <linux/spinlock.h> #include <linux/gfp.h> +#include <linux/module.h> #include <crypto/ctr.h> #include <crypto/des.h> diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index dc641c796526..921039e56f87 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -124,6 +124,9 @@ struct talitos_private { void __iomem *reg; int irq[2]; + /* SEC global registers lock */ + spinlock_t reg_lock ____cacheline_aligned; + /* SEC version geometry (from device tree node) */ unsigned int num_channels; unsigned int chfifo_len; @@ -412,6 +415,7 @@ static void talitos_done_##name(unsigned long data) \ { \ struct device *dev = (struct device *)data; \ struct talitos_private *priv = dev_get_drvdata(dev); \ + unsigned long flags; \ \ if (ch_done_mask & 1) \ flush_channel(dev, 0, 0, 0); \ @@ -427,8 +431,10 @@ static void talitos_done_##name(unsigned long data) \ out: \ /* At this point, all completed channels have been processed */ \ |