Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd

Pull MTD updates from David Woodhouse:
 - Various cleanups especially in NAND tests
 - Add support for NAND flash on BCMA bus
 - DT support for sh_flctl and denali NAND drivers
 - Kill obsolete/superceded drivers (fortunet, nomadik_nand)
 - Fix JFFS2 locking bug in ENOMEM failure path
 - New SPI flash chips, as usual
 - Support writing in 'reliable mode' for DiskOnChip G4
 - Debugfs support in nandsim

* tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits)
  mtd: nand: typo in nand_id_has_period() comments
  mtd: nand/gpio: use io{read,write}*_rep accessors
  mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited.
  mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems
  mtd: nand/docg4: fix and improve read of factory bbt
  mtd: nand/docg4: reserve bb marker area in ecclayout
  mtd: nand/docg4: add support for writing in reliable mode
  mtd: mxc_nand: reorder part_probes to let cmdline override other sources
  mtd: mxc_nand: fix unbalanced clk_disable() in error path
  mtd: nandsim: Introduce debugfs infrastructure
  mtd: physmap_of: error checking to prevent a NULL pointer dereference
  mtg: docg3: potential divide by zero in doc_write_oob()
  mtd: bcm47xxnflash: writing support
  mtd: tests/read: initialize buffer for whole next page
  mtd: at91: atmel_nand: return bit flips for the PMECC read_page()
  mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c
  mtd: nand: onfi need to be probed in 8 bits mode
  mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width
  mtd: nand: print flash size during detection
  mted: nand_wait_ready timeout fix
  ...

95 files changed, 2301 insertions, 1639 deletions

diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
index e162999bf916..c62c788b3289 100644
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -13,12 +13,13 @@
 #include <linux/export.h>
 #include <linux/bcma/bcma.h>
 
-static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
+u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
 {
 	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
 	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
 	return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
 }
+EXPORT_SYMBOL_GPL(bcma_chipco_pll_read);
 
 void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
 {
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 517a8ff7121e..6b4c70f7d23d 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -20,6 +20,7 @@ void __init nomadik_clk_init(void)
 	clk_register_clkdev(clk, NULL, "gpio.2");
 	clk_register_clkdev(clk, NULL, "gpio.3");
 	clk_register_clkdev(clk, NULL, "rng");
+	clk_register_clkdev(clk, NULL, "fsmc-nand");
 
 	/*
 	 * The 2.4 MHz TIMCLK reference clock is active at boot time, this is
diff --git a/drivers/mtd/ar7part.c b/drivers/mtd/ar7part.c
index 945393129952..7c057a05adb6 100644
--- a/drivers/mtd/ar7part.c
+++ b/drivers/mtd/ar7part.c
@@ -26,19 +26,16 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/bootmem.h>
-#include <linux/magic.h>
 #include <linux/module.h>
 
+#include <uapi/linux/magic.h>
+
 #define AR7_PARTS	4
 #define ROOT_OFFSET	0xe0000
 
 #define LOADER_MAGIC1	le32_to_cpu(0xfeedfa42)
 #define LOADER_MAGIC2	le32_to_cpu(0xfeed1281)
 
-#ifndef SQUASHFS_MAGIC
-#define SQUASHFS_MAGIC	0x73717368
-#endif
-
 struct ar7_bin_rec {
 	unsigned int checksum;
 	unsigned int length;
diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/bcm63xxpart.c
index 63d2a64331f7..6eeb84c81bc2 100644
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
@@ -37,8 +37,7 @@
 
 #define BCM63XX_EXTENDED_SIZE	0xBFC00000	/* Extended flash address */
 
-#define BCM63XX_MIN_CFE_SIZE	0x10000		/* always at least 64KiB */
-#define BCM63XX_MIN_NVRAM_SIZE	0x10000		/* always at least 64KiB */
+#define BCM63XX_CFE_BLOCK_SIZE	0x10000		/* always at least 64KiB */
 
 #define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
 
@@ -79,7 +78,7 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
 	unsigned int rootfsaddr, kerneladdr, spareaddr;
 	unsigned int rootfslen, kernellen, sparelen, totallen;
 	unsigned int cfelen, nvramlen;
-	int namelen = 0;
+	unsigned int cfe_erasesize;
 	int i;
 	u32 computed_crc;
 	bool rootfs_first = false;
@@ -87,8 +86,11 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
 	if (bcm63xx_detect_cfe(master))
 		return -EINVAL;
 
-	cfelen = max_t(uint32_t, master->erasesize, BCM63XX_MIN_CFE_SIZE);
-	nvramlen = max_t(uint32_t, master->erasesize, BCM63XX_MIN_NVRAM_SIZE);
+	cfe_erasesize = max_t(uint32_t, master->erasesize,
+			      BCM63XX_CFE_BLOCK_SIZE);
+
+	cfelen = cfe_erasesize;
+	nvramlen = cfe_erasesize;
 
 	/* Allocate memory for buffer */
 	buf = vmalloc(sizeof(struct bcm_tag));
@@ -121,7 +123,6 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
 		kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
 		rootfsaddr = rootfsaddr - BCM63XX_EXTENDED_SIZE;
 		spareaddr = roundup(totallen, master->erasesize) + cfelen;
-		sparelen = master->size - spareaddr - nvramlen;
 
 		if (rootfsaddr < kerneladdr) {
 			/* default Broadcom layout */
@@ -139,19 +140,15 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
 		rootfslen = 0;
 		rootfsaddr = 0;
 		spareaddr = cfelen;
-		sparelen = master->size - cfelen - nvramlen;
 	}
+	sparelen = master->size - spareaddr - nvramlen;
 
 	/* Determine number of partitions */
-	namelen = 8;
-	if (rootfslen > 0) {
+	if (rootfslen > 0)
 		nrparts++;
-		namelen += 6;
-	}
-	if (kernellen > 0) {
+
+	if (kernellen > 0)
 		nrparts++;
-		namelen += 6;
-	}
 
 	/* Ask kernel for more memory */
 	parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
@@ -193,17 +190,16 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
 	parts[curpart].name = "nvram";
 	parts[curpart].offset = master->size - nvramlen;
 	parts[curpart].size = nvramlen;
+	curpart++;
 
 	/* Global partition "linux" to make easy firmware upgrade */
-	curpart++;
 	parts[curpart].name = "linux";
 	parts[curpart].offset = cfelen;
 	parts[curpart].size = master->size - cfelen - nvramlen;
 
 	for (i = 0; i < nrparts; i++)
-		pr_info("Partition %d is %s offset %lx and length %lx\n", i,
-			parts[i].name, (long unsigned int)(parts[i].offset),
-			(long unsigned int)(parts[i].size));
+		pr_info("Partition %d is %s offset %llx and length %llx\n", i,
+			parts[i].name, parts[i].offset,	parts[i].size);
 
 	pr_info("Spare partition is offset %x and length %x\n",	spareaddr,
 		sparelen);
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 5ff5c4a16943..b86197286f24 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1536,8 +1536,20 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 		UDELAY(map, chip, adr, 1);
 	}
 
-	/* reset on all failures. */
-	map_write( map, CMD(0xF0), chip->start );
+	/*
+	 * Recovery from write-buffer programming failures requires
+	 * the write-to-buffer-reset sequence.  Since the last part
+	 * of the sequence also works as a normal reset, we can run
+	 * the same commands regardless of why we are here.
+	 * See e.g.
+	 * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf
+	 */
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi,
+			 cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi,
+			 cfi->device_type, NULL);
 	xip_enable(map, chip, adr);
 	/* FIXME - should have reset delay before continuing */
 
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index aed1b8a63c9f..c533f27d863f 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -56,8 +56,8 @@
 
 
 /* special size referring to all the remaining space in a partition */
-#define SIZE_REMAINING UINT_MAX
-#define OFFSET_CONTINUOUS UINT_MAX
+#define SIZE_REMAINING ULLONG_MAX
+#define OFFSET_CONTINUOUS ULLONG_MAX
 
 struct cmdline_mtd_partition {
 	struct cmdline_mtd_partition *next;
@@ -89,7 +89,7 @@ static struct mtd_partition * newpart(char *s,
 				      int extra_mem_size)
 {
 	struct mtd_partition *parts;
-	unsigned long size, offset = OFFSET_CONTINUOUS;
+	unsigned long long size, offset = OFFSET_CONTINUOUS;
 	char *name;
 	int name_len;
 	unsigned char *extra_mem;
@@ -104,7 +104,8 @@ static struct mtd_partition * newpart(char *s,
 	} else {
 		size = memparse(s, &s);
 		if (size < PAGE_SIZE) {
-			printk(KERN_ERR ERRP "partition size too small (%lx)\n", size);
+			printk(KERN_ERR ERRP "partition size too small (%llx)\n",
+			       size);
 			return ERR_PTR(-EINVAL);
 		}
 	}
@@ -296,7 +297,7 @@ static int parse_cmdline_partitions(struct mtd_info *master,
 				    struct mtd_partition **pparts,
 				    struct mtd_part_parser_data *data)
 {
-	unsigned long offset;
+	unsigned long long offset;
 	int i, err;
 	struct cmdline_mtd_partition *part;
 	const char *mtd_id = master->name;
@@ -308,48 +309,52 @@ static int parse_cmdline_partitions(struct mtd_info *master,
 			return err;
 	}
 
+	/*
+	 * Search for the partition definition matching master->name.
+	 * If master->name is not set, stop at first partition definition.
+	 */
 	for (part = partitions; part; part = part->next) {
-		if ((!mtd_id) || (!strcmp(part->mtd_id, mtd_id))) {
-			for (i = 0, offset = 0; i < part->num_parts; i++) {
-				if (part->parts[i].offset == OFFSET_CONTINUOUS)
-					part->parts[i].offset = offset;
-				else
-					offset = part->parts[i].offset;
-
-				if (part->parts[i].size == SIZE_REMAINING)
-					part->parts[i].size = master->size - offset;
-
-				if (part->parts[i].size == 0) {
-					printk(KERN_WARNING ERRP
-					       "%s: skipping zero sized partition\n",
-					       part->mtd_id);
-					part->num_parts--;
-					memmove(&part->parts[i],
-						&part->parts[i + 1],
-						sizeof(*part->parts) * (part->num_parts - i));
-					continue;
-				}
-
-				if (offset + part->parts[i].size > master->size) {
-					printk(KERN_WARNING ERRP
-					       "%s: partitioning exceeds flash size, truncating\n",
-					       part->mtd_id);
-					part->parts[i].size = master->size - offset;
-				}
-				offset += part->parts[i].size;
-			}
-
-			*pparts = kmemdup(part->parts,
-					sizeof(*part->parts) * part->num_parts,
-					GFP_KERNEL);
-			if (!*pparts)
-				return -ENOMEM;
-
-			return part->num_parts;
+		if ((!mtd_id) || (!strcmp(part->mtd_id, mtd_id)))
+			break;
+	}
+
+	if (!part)
+		return 0;
+
+	for (i = 0, offset = 0; i < part->num_parts; i++) {
+		if (part->parts[i].offset == OFFSET_CONTINUOUS)
+			part->parts[i].offset = offset;
+		else
+			offset = part->parts[i].offset;
+
+		if (part->parts[i].size == SIZE_REMAINING)
+			part->parts[i].size = master->size - offset;
+
+		if (part->parts[i].size == 0) {
+			printk(KERN_WARNING ERRP
+			       "%s: skipping zero sized partition\n",
+			       part->mtd_id);
+			part->num_parts--;
+			memmove(&part->parts[i], &part->parts[i + 1],
+				sizeof(*part->parts) * (part->num_parts - i));
+			continue;
 		}
+
+		if (offset + part->parts[i].size > master->size) {
+			printk(KERN_WARNING ERRP
+			       "%s: partitioning exceeds flash size, truncating\n",
+			       part->mtd_id);
+			part->parts[i].size = master->size - offset;
+		}
+		offset += part->parts[i].size;
 	}
 
-	return 0;
+	*pparts = kmemdup(part->parts, sizeof(*part->parts) * part->num_parts,
+			  GFP_KERNEL);
+	if (!*pparts)
+		return -ENOMEM;
+
+	return part->num_parts;
 }