diff options
author | Manu Gautam <mgautam@codeaurora.org> | 2018-01-18 16:54:30 +0530 |
---|---|---|
committer | Felipe Balbi <felipe.balbi@linux.intel.com> | 2018-02-12 10:50:16 +0200 |
commit | c4a5153e87fdf6805f63ff57556260e2554155a5 (patch) | |
tree | 5ca6f6f3995b3a864f76a11918e8f0f0a5596fde /drivers | |
parent | 00b42170c86f90ac9dea83a7dfcd3f0c38098fe2 (diff) |
usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode
Commit 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during
host bus-suspend/resume") updated suspend/resume routines to not
power_off and reinit PHYs/core for host mode.
It broke platforms that rely on DWC3 core to power_off PHYs to
enter low power state on system suspend.
Perform dwc3_core_exit/init only during host mode system_suspend/
resume to addresses power regression from above mentioned patch
and also allow USB session to stay connected across
runtime_suspend/resume in host mode. While at it also replace
existing checks for HOST only dr_mode with current_dr_role to
have similar core driver behavior for both Host-only and DRD+Host
configurations.
Fixes: 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during host bus-suspend/resume")
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/dwc3/core.c | 36 |
1 files changed, 22 insertions, 14 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index bc2467f0e6a7..59511f2cd3ac 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -100,6 +100,8 @@ static void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode) reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); reg |= DWC3_GCTL_PRTCAPDIR(mode); dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + dwc->current_dr_role = mode; } static void __dwc3_set_mode(struct work_struct *work) @@ -133,8 +135,6 @@ static void __dwc3_set_mode(struct work_struct *work) dwc3_set_prtcap(dwc, dwc->desired_dr_role); - dwc->current_dr_role = dwc->desired_dr_role; - spin_unlock_irqrestore(&dwc->lock, flags); switch (dwc->desired_dr_role) { @@ -219,7 +219,7 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) * XHCI driver will reset the host block. If dwc3 was configured for * host-only mode, then we can return early. */ - if (dwc->dr_mode == USB_DR_MODE_HOST) + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; reg = dwc3_readl(dwc->regs, DWC3_DCTL); @@ -919,7 +919,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: - dwc->current_dr_role = DWC3_GCTL_PRTCAP_DEVICE; dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); if (dwc->usb2_phy) @@ -935,7 +934,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) } break; case USB_DR_MODE_HOST: - dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST; dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); if (dwc->usb2_phy) @@ -1287,7 +1285,7 @@ static int dwc3_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int dwc3_suspend_common(struct dwc3 *dwc) +static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; @@ -1299,6 +1297,10 @@ static int dwc3_suspend_common(struct dwc3 *dwc) dwc3_core_exit(dwc); break; case DWC3_GCTL_PRTCAP_HOST: + /* do nothing during host runtime_suspend */ + if (!PMSG_IS_AUTO(msg)) + dwc3_core_exit(dwc); + break; default: /* do nothing */ break; @@ -1307,7 +1309,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc) return 0; } -static int dwc3_resume_common(struct dwc3 *dwc) +static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; int ret; @@ -1323,6 +1325,13 @@ static int dwc3_resume_common(struct dwc3 *dwc) spin_unlock_irqrestore(&dwc->lock, flags); break; case DWC3_GCTL_PRTCAP_HOST: + /* nothing to do on host runtime_resume */ + if (!PMSG_IS_AUTO(msg)) { + ret = dwc3_core_init(dwc); + if (ret) + return ret; + } + break; default: /* do nothing */ break; @@ -1334,12 +1343,11 @@ static int dwc3_resume_common(struct dwc3 *dwc) static int dwc3_runtime_checks(struct dwc3 *dwc) { switch (dwc->current_dr_role) { - case USB_DR_MODE_PERIPHERAL: - case USB_DR_MODE_OTG: + case DWC3_GCTL_PRTCAP_DEVICE: if (dwc->connected) return -EBUSY; break; - case USB_DR_MODE_HOST: + case DWC3_GCTL_PRTCAP_HOST: default: /* do nothing */ break; @@ -1356,7 +1364,7 @@ static int dwc3_runtime_suspend(struct device *dev) if (dwc3_runtime_checks(dwc)) return -EBUSY; - ret = dwc3_suspend_common(dwc); + ret = dwc3_suspend_common(dwc, PMSG_AUTO_SUSPEND); if (ret) return ret; @@ -1372,7 +1380,7 @@ static int dwc3_runtime_resume(struct device *dev) device_init_wakeup(dev, false); - ret = dwc3_resume_common(dwc); + ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME); if (ret) return ret; @@ -1419,7 +1427,7 @@ static int dwc3_suspend(struct device *dev) struct dwc3 *dwc = dev_get_drvdata(dev); int ret; - ret = dwc3_suspend_common(dwc); + ret = dwc3_suspend_common(dwc, PMSG_SUSPEND); if (ret) return ret; @@ -1435,7 +1443,7 @@ static int dwc3_resume(struct device *dev) pinctrl_pm_select_default_state(dev); - ret = dwc3_resume_common(dwc); + ret = dwc3_resume_common(dwc, PMSG_RESUME); if (ret) return ret; |