Merge branch 'ieee1394-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

* 'ieee1394-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: remove the old IEEE 1394 driver stack
  ieee1394: move init_ohci1394_dma to drivers/firewire/

Fix trivial change/delete conflict: drivers/ieee1394/eth1394.c is
getting removed, but was modified by the networking merge.

46 files changed, 51 insertions, 29290 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index 167af319cfdf..14cf9077bb2b 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -51,7 +51,6 @@ obj-y				+= net/
 obj-$(CONFIG_ATM)		+= atm/
 obj-$(CONFIG_FUSION)		+= message/
 obj-y				+= firewire/
-obj-y				+= ieee1394/
 obj-$(CONFIG_UIO)		+= uio/
 obj-y				+= cdrom/
 obj-y				+= auxdisplay/
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index fcf3ea28340b..40a222e19b2d 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -3,9 +3,6 @@ menu "IEEE 1394 (FireWire) support"
 	# firewire-core does not depend on PCI but is
 	# not useful without PCI controller driver
 
-comment "You can enable one or both FireWire driver stacks."
-comment "The newer stack is recommended."
-
 config FIREWIRE
 	tristate "FireWire driver stack"
 	select CRC_ITU_T
@@ -64,8 +61,6 @@ config FIREWIRE_NET
 	  To compile this driver as a module, say M here:  The module will be
 	  called firewire-net.
 
-source "drivers/ieee1394/Kconfig"
-
 config FIREWIRE_NOSY
 	tristate "Nosy - a FireWire traffic sniffer for PCILynx cards"
 	depends on PCI
diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile
index 3c6a7fb20aa7..e3870d5c43dd 100644
--- a/drivers/firewire/Makefile
+++ b/drivers/firewire/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_FIREWIRE_OHCI) += firewire-ohci.o
 obj-$(CONFIG_FIREWIRE_SBP2) += firewire-sbp2.o
 obj-$(CONFIG_FIREWIRE_NET)  += firewire-net.o
 obj-$(CONFIG_FIREWIRE_NOSY) += nosy.o
+obj-$(CONFIG_PROVIDE_OHCI1394_DMA_INIT) += init_ohci1394_dma.o
diff --git a/drivers/ieee1394/init_ohci1394_dma.c b/drivers/firewire/init_ohci1394_dma.c
index ddaab6eb8ace..a9a347adb353 100644
--- a/drivers/ieee1394/init_ohci1394_dma.c
+++ b/drivers/firewire/init_ohci1394_dma.c
@@ -32,23 +32,41 @@
  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
-#include <linux/interrupt.h>	/* for ohci1394.h */
 #include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
 #include <linux/pci.h>		/* for PCI defines */
-#include <linux/init_ohci1394_dma.h>
+#include <linux/string.h>
+
 #include <asm/pci-direct.h>	/* for direct PCI config space access */
 #include <asm/fixmap.h>
 
-#include "ieee1394_types.h"
-#include "ohci1394.h"
+#include <linux/init_ohci1394_dma.h>
+#include "ohci.h"
 
 int __initdata init_ohci1394_dma_early;
 
+struct ohci {
+	void __iomem *registers;
+};
+
+static inline void reg_write(const struct ohci *ohci, int offset, u32 data)
+{
+	writel(data, ohci->registers + offset);
+}
+
+static inline u32 reg_read(const struct ohci *ohci, int offset)
+{
+	return readl(ohci->registers + offset);
+}
+
+#define OHCI_LOOP_COUNT		100	/* Number of loops for reg read waits */
+
 /* Reads a PHY register of an OHCI-1394 controller */
-static inline u8 __init get_phy_reg(struct ti_ohci *ohci, u8 addr)
+static inline u8 __init get_phy_reg(struct ohci *ohci, u8 addr)
 {
 	int i;
-	quadlet_t r;
+	u32 r;
 
 	reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | 0x00008000);
 
@@ -63,22 +81,22 @@ static inline u8 __init get_phy_reg(struct ti_ohci *ohci, u8 addr)
 }
 
 /* Writes to a PHY register of an OHCI-1394 controller */
-static inline void __init set_phy_reg(struct ti_ohci *ohci, u8 addr, u8 data)
+static inline void __init set_phy_reg(struct ohci *ohci, u8 addr, u8 data)
 {
 	int i;
 
 	reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | data | 0x00004000);
 
 	for (i = 0; i < OHCI_LOOP_COUNT; i++) {
-		u32 r = reg_read(ohci, OHCI1394_PhyControl);
-		if (!(r & 0x00004000))
+		if (!(reg_read(ohci, OHCI1394_PhyControl) & 0x00004000))
 			break;
 		mdelay(1);
 	}
 }
 
 /* Resets an OHCI-1394 controller (for sane state before initialization) */
-static inline void __init init_ohci1394_soft_reset(struct ti_ohci *ohci) {
+static inline void __init init_ohci1394_soft_reset(struct ohci *ohci)
+{
 	int i;
 
 	reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
@@ -91,10 +109,14 @@ static inline void __init init_ohci1394_soft_reset(struct ti_ohci *ohci) {
 	}
 }
 
+#define OHCI1394_MAX_AT_REQ_RETRIES	0xf
+#define OHCI1394_MAX_AT_RESP_RETRIES	0x2
+#define OHCI1394_MAX_PHYS_RESP_RETRIES	0x8
+
 /* Basic OHCI-1394 register and port inititalization */
-static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci)
+static inline void __init init_ohci1394_initialize(struct ohci *ohci)
 {
-	quadlet_t bus_options;
+	u32 bus_options;
 	int num_ports, i;
 
 	/* Put some defaults to these undefined bus options */
@@ -116,7 +138,7 @@ static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci)
 
 	/* enable phys */
 	reg_write(ohci, OHCI1394_LinkControlSet,
-			OHCI1394_LinkControl_RcvPhyPkt);
+			OHCI1394_LinkControl_rcvPhyPkt);
 
 	/* Don't accept phy packets into AR request context */
 	reg_write(ohci, OHCI1394_LinkControlClear, 0x00000400);
@@ -128,7 +150,7 @@ static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci)
 	reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
 
 	/* Accept asyncronous transfer requests from all nodes for now */
-	reg_write(ohci,OHCI1394_AsReqFilterHiSet, 0x80000000);
+	reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
 
 	/* Specify asyncronous transfer retries */
 	reg_write(ohci, OHCI1394_ATRetries,
@@ -137,7 +159,8 @@ static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci)
 		  (OHCI1394_MAX_PHYS_RESP_RETRIES<<8));
 
 	/* We don't want hardware swapping */
-	reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwap);
+	reg_write(ohci, OHCI1394_HCControlClear,
+		  OHCI1394_HCControl_noByteSwapData);
 
 	/* Enable link */
 	reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable);
@@ -164,11 +187,11 @@ static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci)
  * has to be enabled after each bus reset when needed. We resort
  * to polling here because on early boot, we have no interrupts.
  */
-static inline void __init init_ohci1394_wait_for_busresets(struct ti_ohci *ohci)
+static inline void __init init_ohci1394_wait_for_busresets(struct ohci *ohci)
 {
 	int i, events;
 
-	for (i=0; i < 9; i++) {
+	for (i = 0; i < 9; i++) {
 		mdelay(200);
 		events = reg_read(ohci, OHCI1394_IntEventSet);
 		if (events & OHCI1394_busReset)
@@ -182,18 +205,18 @@ static inline void __init init_ohci1394_wait_for_busresets(struct ti_ohci *ohci)
  * This enables remote DMA access over IEEE1394 from every host for the low
  * 4GB of address space. DMA accesses above 4GB are not available currently.
  */
-static inline void __init init_ohci1394_enable_physical_dma(struct ti_ohci *hci)
+static inline void __init init_ohci1394_enable_physical_dma(struct ohci *ohci)
 {
-	reg_write(hci, OHCI1394_PhyReqFilterHiSet, 0xffffffff);
-	reg_write(hci, OHCI1394_PhyReqFilterLoSet, 0xffffffff);
-	reg_write(hci, OHCI1394_PhyUpperBound, 0xffff0000);
+	reg_write(ohci, OHCI1394_PhyReqFilterHiSet, 0xffffffff);
+	reg_write(ohci, OHCI1394_PhyReqFilterLoSet, 0xffffffff);
+	reg_write(ohci, OHCI1394_PhyUpperBound, 0xffff0000);
 }
 
 /**
  * init_ohci1394_reset_and_init_dma - init controller and enable DMA
  * This initializes the given controller and enables physical DMA engine in it.
  */
-static inline void __init init_ohci1394_reset_and_init_dma(struct ti_ohci *ohci)
+static inline void __init init_ohci1394_reset_and_init_dma(struct ohci *ohci)
 {
 	/* Start off with a soft reset, clears everything to a sane state. */
 	init_ohci1394_soft_reset(ohci);
@@ -225,7 +248,7 @@ static inline void __init init_ohci1394_reset_and_init_dma(struct ti_ohci *ohci)
 static inline void __init init_ohci1394_controller(int num, int slot, int func)
 {
 	unsigned long ohci_base;
-	struct ti_ohci ohci;
+	struct ohci ohci;
 
 	printk(KERN_INFO "init_ohci1394_dma: initializing OHCI-1394"
 			 " at %02x:%02x.%x\n", num, slot, func);
@@ -235,7 +258,7 @@ static inline void __init init_ohci1394_controller(int num, int slot, int func)
 
 	set_fixmap_nocache(FIX_OHCI1394_BASE, ohci_base);
 
-	ohci.registers = (void *)fix_to_virt(FIX_OHCI1394_BASE);
+	ohci.registers = (void __iomem *)fix_to_virt(FIX_OHCI1394_BASE);
 
 	init_ohci1394_reset_and_init_dma(&ohci);
 }
@@ -247,6 +270,7 @@ static inline void __init init_ohci1394_controller(int num, int slot, int func)
 void __init init_ohci1394_dma_on_all_controllers(void)
 {
 	int num, slot, func;
+	u32 class;
 
 	if (!early_pci_allowed())
 		return;
@@ -255,9 +279,9 @@ void __init init_ohci1394_dma_on_all_controllers(void)
 	for (num = 0; num < 32; num++) {
 		for (slot = 0; slot < 32; slot++) {
 			for (func = 0; func < 8; func++) {
-				u32 class = read_pci_config(num,slot,func,
+				class = read_pci_config(num, slot, func,
 							PCI_CLASS_REVISION);
-				if ((class == 0xffffffff))
+				if (class == 0xffffffff)
 					continue; /* No device at this func */
 
 				if (class>>8 != PCI_CLASS_SERIAL_FIREWIRE_OHCI)
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
deleted file mode 100644
index e02096cf7d95..000000000000
--- a/drivers/ieee1394/Kconfig
+++ /dev/null
@@ -1,182 +0,0 @@
-config IEEE1394
-	tristate "Legacy alternative FireWire driver stack"
-	depends on PCI || BROKEN
-	help
-	  IEEE 1394 describes a high performance serial bus, which is also
-	  known as FireWire(tm) or i.Link(tm) and is used for connecting all
-	  sorts of devices (most notably digital video cameras) to your
-	  computer.
-
-	  If you have FireWire hardware and want to use it, say Y here.  This
-	  is the core support only, you will also need to select a driver for
-	  your IEEE 1394 adapter.
-
-	  To compile this driver as a module, say M here: the module will be
-	  called ieee1394.
-
-	  NOTE:
-	  ieee1394 is superseded by the newer firewire-core driver.  See
-	  http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
-	  further information on how to switch to the new FireWire drivers.
-
-config IEEE1394_OHCI1394
-	tristate "OHCI-1394 controllers"
-	depends on PCI && IEEE1394
-	help
-	  Enable this driver if you have an IEEE 1394 controller based on the
-	  OHCI-1394 specification. The current driver is only tested with OHCI
-	  chipsets made by Texas Instruments and NEC. Most third-party vendors
-	  use one of these chipsets.  It should work with any OHCI-1394
-	  compliant card, however.
-
-	  To compile this driver as a module, say M here: the module will be
-	  called ohci1394.
-
-	  NOTE:
-	  ohci1394 is superseded by the newer firewire-ohci driver.  See
-	  http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
-	  further information on how to switch to the new FireWire drivers.
-
-	  If you want to install firewire-ohci and ohci1394 together, you
-	  should configure them only as modules and blacklist the driver(s)
-	  which you don't want to have auto-loaded.  Add either
-
-	      blacklist ohci1394
-	      blacklist video1394
-	      blacklist dv1394
-	  or
-	      blacklist firewire-ohci
-
-	  to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
-	  depending on your distribution.
-
-comment "PCILynx controller requires I2C"
-	depends on IEEE1394 && I2C=n
-
-config IEEE1394_PCILYNX
-	tristate "PCILynx controller"
-	depends on PCI && IEEE1394 && I2C
-	select I2C_ALGOBIT
-	help
-	  Say Y here if you have an IEEE-1394 controller with the Texas
-	  Instruments PCILynx chip.  Note: this driver is written for revision
-	  2 of this chip and may not work with revision 0.
-
-	  To compile this driver as a module, say M here: the module will be
-	  called pcilynx.
-
-	  Only some old and now very rare PCI and CardBus cards and
-	  PowerMacs G3 B&W contain the PCILynx controller.  Therefore
-	  almost everybody can say N here.
-
-comment "SBP-2 support (for storage devices) requires SCSI"
-	depends on IEEE1394 && SCSI=n
-
-config IEEE1394_SBP2
-	tristate "Storage devices (SBP-2 protocol)"
-	depends on IEEE1394 && SCSI
-	help
-	  This option enables you to use SBP-2 devices connected to an IEEE
-	  1394 bus.  SBP-2 devices include storage devices like harddisks and
-	  DVD drives, also some other FireWire devices like scanners.
-
-	  You should also enable support for disks, CD-ROMs, etc. in the SCSI
-	  configuration section.
-
-	  To compile this driver as a module, say M here: the module will be
-	  called sbp2.
-
-	  NOTE:
-	  sbp2 is superseded by the newer firewire-sbp2 driver. See
-	  http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
-	  further information on how to switch to the new FireWire drivers.
-
-config IEEE1394_SBP2_PHYS_DMA
-	bool "Enable replacement for physical DMA in SBP2"
-	depends on IEEE1394_SBP2 && VIRT_TO_BUS && EXPERIMENTAL
-	help
-	  This builds sbp2 for use with non-OHCI host adapters which do not
-	  support physical DMA or for when ohci1394 is run with phys_dma=0.
-	  Physical DMA is data movement without assistance of the drivers'
-	  interrupt handlers.  This option includes the interrupt handlers
-	  that are required in absence of this hardware feature.
-
-	  This option is buggy and currently broken on some architectures.
-	  If unsure, say N.
-
-config IEEE1394_ETH1394_ROM_ENTRY
-	depends on IEEE1394
-	bool
-	default n
-
-config IEEE1394_ETH1394
-	tristate "IP networking over 1394 (experimental)"
-	depends on IEEE1394 && EXPERIMENTAL && INET
-	select IEEE1394_ETH1394_ROM_ENTRY
-	help
-	  This driver implements a functional majority of RFC 2734: IPv4 over
-	  1394.  It will provide IP connectivity with implementations of RFC
-	  2734 found on other operating systems.  It will not communicate with
-	  older versions of this driver found in stock kernels prior to 2.6.3.
-	  This driver is still considered experimental.  It does not yet support
-	  MCAP, therefore multicast support is significantly limited.
-
-	  The module is called eth1394 although it does not emulate Ethernet.
-
-	  NOTE:
-	  eth1394 is superseded by the newer firewire-net driver. See
-	  http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
-	  further information on how to switch to the new FireWire drivers.
-
-config IEEE1394_RAWIO
-	tristate "raw1394 userspace interface"
-	depends on IEEE1394
-	help
-	  This option adds support for the raw1394 device file which enables
-	  direct communication of user programs with IEEE 1394 devices
-	  (isochronous and asynchronous).  Almost all application programs
-	  which access FireWire require this option.
-
-	  To compile this driver as a module, say M here: the module will be
-	  called raw1394.
-
-	  NOTE:
-	  raw1394 is superseded by the newer firewire-core driver. See
-	  http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
-	  further information on how to switch to the new FireWire drivers.
-
-config IEEE1394_VIDEO1394
-	tristate "video1394 userspace interface"
-	depends on IEEE1394 && IEEE1394_OHCI1394
-	help
-	  This option adds support for the video1394 device files which enable
-	  isochronous communication of user programs with IEEE 1394 devices,
-	  especially video capture or export.  This interface is used by all
-	  libdc1394 based programs and by several other programs, in addition to
-	  the raw1394 interface.  It is generally not required for DV capture.
-
-	  To compile this driver as a module, say M here: the module will be
-	  called video1394.
-
-	  NOTE:
-	  video1394 is superseded by the newer firewire-core driver. See
-	  http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
-	  further information on how to switch to the new FireWire drivers.
-
-config IEEE1394_DV1394
-	tristate "dv1394 userspace interface (deprecated)"
-	depends on IEEE1394 && IEEE1394_OHCI1394
-	help
-	  The dv1394 driver is unsupported and may be removed from Linux in a
-	  future release.  Its functionality is now provided by either
-	  raw1394 or firewire-core together with libraries such as libiec61883.
-
-config IEEE1394_VERBOSEDEBUG
-	bool "Excessive debugging output"
-	depends on IEEE1394
-	help
-	  If you say Y here, you will get very verbose debugging logs from the
-	  ieee1394 drivers, including sent and received packet headers.  This
-	  will quickly result in large amounts of data sent to the system log.
-
-	  Say Y if you really need the debugging output.  Everyone else says N.
diff --git a/drivers/ieee1394/Makefile b/drivers/ieee1394/Makefile
deleted file mode 100644
index 1f8153b57503..000000000000
--- a/drivers/ieee1394/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the Linux IEEE 1394 implementation
-#
-
-ieee1394-objs := ieee1394_core.o ieee1394_transactions.o hosts.o \
-		 highlevel.o csr.o nodemgr.o dma.o iso.o \
-		 csr1212.o config_roms.o
-
-obj-$(CONFIG_IEEE1394) += ieee1394.o
-obj-$(CONFIG_IEEE1394_PCILYNX) += pcilynx.o
-obj-$(CONFIG_IEEE1394_OHCI1394) += ohci1394.o
-obj-$(CONFIG_IEEE1394_VIDEO1394) += video1394.o
-obj-$(CONFIG_IEEE1394_RAWIO) += raw1394.o
-obj-$(CONFIG_IEEE1394_SBP2) += sbp2.o
-obj-$(CONFIG_IEEE1394_DV1394) += dv1394.o
-obj-$(CONFIG_IEEE1394_ETH1394) += eth1394.o
-
-obj-$(CONFIG_PROVIDE_OHCI1394_DMA_INIT) += init_ohci1394_dma.o
diff --git a/drivers/ieee1394/config_roms.c b/drivers/ieee1394/config_roms.c
deleted file mode 100644
index 1b981207fa76..000000000000
--- a/drivers/ieee1394/config_roms.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * IEEE 1394 for Linux
- *
- * ConfigROM  entries
- *
- * Copyright (C) 2004 Ben Collins
- *
- * This code is licensed under the GPL.  See the file COPYING in the root
- * directory of the kernel sources for details.
- */
-
-#include <linux/types.h>
-
-#include "csr1212.h"
-#include "ieee1394.h"
-#include "ieee1394_types.h"
-#include "hosts.h"
-#include "ieee1394_core.h"
-#include "highlevel.h"
-#include "csr.h"
-#include "config_roms.h"
-
-struct hpsb_config_rom_entry {
-	const char *name;
-
-	/* Base initialization, called at module load */
-	int (*init)(void);
-
-	/* Cleanup called at module exit */
-	void (*cleanup)(void);
-
-	/* The flag added to host->config_roms */
-	unsigned int flag;
-};
-
-/* The default host entry. This must succeed. */
-int hpsb_default_host_entry(struct hpsb_host *host)
-{
-	struct csr1212_keyval *root;
-	struct csr1212_keyval *vend_id = NULL;
-	struct csr1212_keyval *text = NULL;
-	char csr_name[128];
-	int ret;
-
-	sprintf(csr_name, "Linux - %s", host->driver->name);
-	root = host->csr.rom->root_kv;
-
-	vend_id = csr1212_new_immediate(CSR1212_KV_ID_VENDOR, host->csr.guid_hi >> 8);
-	text = csr1212_new_string_descriptor_leaf(csr_name);
-
-	if (!vend_id || !text) {
-		if (vend_id)
-			csr1212_release_keyval(vend_id);
-		if (text)
-			csr1212_release_keyval(text);
-		csr1212_destroy_csr(host->csr.rom);
-		return -ENOMEM;
-	}
-
-	csr1212_associate_keyval(vend_id, text);
-	csr1212_release_keyval(text);
-	ret = csr1212_attach_keyval_to_directory(root, vend_id);
-	csr1212_release_keyval(vend_id);
-	if (ret != CSR1212_SUCCESS) {
-		csr1212_destroy_csr(host->csr.rom);
-		return -ENOMEM;
-	}
-
-	host->update_config_rom = 1;
-
-	return 0;
-}
-
-
-#ifdef CONFIG_IEEE1394_ETH1394_ROM_ENTRY
-#include "eth1394.h"
-
-static struct csr1212_keyval *ip1394_ud;
-
-static int config_rom_ip1394_init(void)
-{
-	struct csr1212_keyval *spec_id = NULL;
-	struct csr1212_keyval *spec_desc = NULL;
-	struct csr1212_keyval *ver = NULL;
-	struct csr1212_keyval *ver_desc = NULL;
-	int ret = -ENOMEM;
-
-	ip1394_ud = csr1212_new_directory(CSR1212_KV_ID_UNIT);
-
-	spec_id = csr1212_new_immediate(CSR1212_KV_ID_SPECIFIER_ID,
-					ETHER1394_GASP_SPECIFIER_ID);
-	spec_desc = csr1212_new_string_descriptor_leaf("IANA");
-	ver = csr1212_new_immediate(CSR1212_KV_ID_VERSION,
-				    ETHER1394_GASP_VERSION);
-	ver_desc = csr1212_new_string_descriptor_leaf("IPv4");
-
-	if (!ip1394_ud || !spec_id || !spec_desc || !ver || !ver_desc)
-		goto ip1394_fail;
-
-	csr1212_associate_keyval(spec_id, spec_desc);
-	csr1212_associate_keyval(ver, ver_desc);
-	if (csr1212_attach_keyval_to_directory(ip1394_ud, spec_id)
-			== CSR1212_SUCCESS &&
-	    csr1212_attach_keyval_to_directory(ip1394_ud, ver)
-			== CSR1212_SUCCESS)
-		ret = 0;
-
-ip1394_fail:
-	if (ret && ip1394_ud) {
-		csr1212_release_keyval(ip1394_ud);
-		ip1394_ud = NULL;
-	}
-
-	if (spec_id)
-		csr1212_release_keyval(spec_id);
-	if (spec_desc)
-		csr1212_release_keyval(spec_desc);
-	if (ver)
-		csr1212_release_keyval(ver);
-	if (ver_desc)
-		csr1212_release_keyval(ver_desc);
-
-	return ret;
-}
-
-static void config_rom_ip1394_cleanup(void)
-{
-	if (ip1394_ud) {
-		csr1212_release_keyval(ip1394_ud);
-		ip1394_ud = NULL;
-	}
-}
-
-int hpsb_config_rom_ip1394_add(struct hpsb_host *host)
-{
-	if (!ip1394_ud)
-		return -ENODEV;
-
-	if (csr1212_attach_keyval_to_directory(host->csr.rom->root_kv,
-					       ip1394_ud) != CSR1212_SUCCESS)
-		return -ENOMEM;
-
-	host->config_roms |= HPSB_CONFIG_ROM_ENTRY_IP1394;
-	host->update_config_rom = 1;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(hpsb_config_rom_ip1394_add);
-
-void hpsb_config_rom_ip1394_remove(struct hpsb_host *host)
-{
-	csr1212_detach_keyval_from_directory(host->csr.rom->root_kv, ip1394_ud);
-	host->config_roms &= ~HPSB_CONFIG_ROM_ENTRY_IP1394;
-	host->update_config_rom = 1;
-}
-EXPORT_SYMBOL_GPL(hpsb_config_rom_ip1394_remove);
-
-static struct hpsb_config_rom_entry ip1394_entry = {
-	.name		= "ip1394",
-	.init		= config_rom_ip1394_init,
-	.cleanup	= config_rom_ip1394_cleanup,
-	.flag		= HPSB_CONFIG_ROM_ENTRY_IP1394,
-};
-
-#endif /* CONFIG_IEEE1394_ETH1394_ROM_ENTRY */
-
-static struct hpsb_config_rom_entry *const config_rom_entries[] = {
-#ifdef CONFIG_IEEE1394_ETH1394_ROM_ENTRY
-	&ip1394_entry,
-#endif
-};
-
-/* Initialize all config roms */
-int hpsb_init_config_roms(void)
-{
-	int i, error = 0;
-
-	for (i = 0; i < ARRAY_SIZE(config_rom_entries); i++)
-		if (config_rom_entries[i]->init()) {
-			HPSB_ERR("Failed to initialize config rom entry `%s'",
-				 config_rom_entries[i]->name);
-			error = -1;
-		}
-
-	return error;
-}
-
-/* Cleanup all config roms */
-void hpsb_cleanup_config_roms(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(config_rom_entries); i++)
-		config_rom_entries[i]->cleanup();
-}
diff --git a/drivers/ieee1394/config_roms.h b/drivers/ieee1394/config_roms.h
deleted file mode 100644
index 1f5cd1f16c44..000000000000
--- a/drivers/ieee1394/config_roms.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _IEEE1394_CONFIG_ROMS_H
-#define _IEEE1394_CONFIG_ROMS_H
-
-struct hpsb_host;
-
-int hpsb_default_host_entry(struct hpsb_host *host);
-int hpsb_init_config_roms(void);
-void hpsb_cleanup_config_roms(void);
-
-/* List of flags to check if a host contains a certain extra config rom
- * entry. Available in the host->config_roms member. */
-#define HPSB_CONFIG_ROM_ENTRY_IP1394		0x00000001
-
-#ifdef CONFIG_IEEE1394_ETH1394_ROM_ENTRY
-int hpsb_config_rom_ip1394_add(struct hpsb_host *host);
-void hpsb_config_rom_ip1394_remove(struct hpsb_host *host);
-#endif
-
-#endif /* _IEEE1394_CONFIG_ROMS_H */
diff --git a/drivers/ieee1394/csr.c b/drivers/ieee1394/csr.c
deleted file mode 100644
index d696f69ebce5..000000000000
--- a/drivers/ieee1394/csr.c
+++ /dev/null
@@ -1,843 +0,0 @@
-/*
- * IEEE 1394 for Linux
- *
- * CSR implementation, iso/bus manager implementation.
- *
- * Copyright (C) 1999 Andreas E. Bombe
- *               2002 Manfred Weihs <weihs@ict.tuwien.ac.at>
- *
- * This code is licensed under the GPL.  See the file COPYING in the root
- * directory of the kernel sources for details.
- *
- *
- * Contributions:
- *
- * Manfred Weihs <weihs@ict.tuwien.ac.at>
- *        configuration ROM manipulation
- *
- *