Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c changes from Wolfram Sang:

 - an arbitration driver.  While the driver is quite simple, it caused
   discussion if we need additional arbitration on top of the one
   specified in the I2C standard.  Conclusion is that I accept a few
   generic mechanisms, but not very specific ones.

 - the core lost the detach_adapter() call.  It has no users anymore and
   was in the way for other cleanups.  attach_adapter() is sadly still
   there since there are users waiting to be converted.

 - the core gained a bus recovery infrastructure.  I2C defines a way to
   recover if the data line is stalled.  This mechanism is now in the
   core and drivers can now pass some data to make use of it.

 - bigger driver cleanups for designware, s3c2410

 - removing superfluous refcounting from drivers

 - removing Ben Dooks as second maintainer due to inactivity.  Thanks
   for all your work so far, Ben!

 - bugfixes, feature additions, devicetree fixups, simplifications...

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  i2c: xiic: must always write 16-bit words to TX_FIFO
  i2c: octeon: use HZ in timeout value
  i2c: octeon: Fix i2c fail problem when a process is terminated by a signal
  i2c: designware-pci: drop superfluous {get|put}_device
  i2c: designware-plat: drop superfluous {get|put}_device
  i2c: davinci: drop superfluous {get|put}_device
  MAINTAINERS: Ben Dooks is inactive regarding I2C
  i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  i2c: at91: convert to dma_request_slave_channel_compat()
  i2c: mxs: do error checking and handling in PIO mode
  i2c: mxs: remove races in PIO code
  i2c-designware: switch to use runtime PM autosuspend
  i2c-designware: use usleep_range() in the busy-loop
  i2c-designware: enable/disable the controller properly
  i2c-designware: use dynamic adapter numbering on Lynxpoint
  i2c-designware-pci: use managed functions pcim_* and devm_*
  i2c-designware-pci: use dev_err() instead of printk()
  i2c-designware: move to managed functions (devm_*)
  i2c: remove CONFIG_HOTPLUG ifdefs
  i2c: s3c2410: Add SMBus emulation for block read
  ...

33 files changed, 835 insertions, 404 deletions

diff --git a/drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c b/drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c
index 88627e3ba1e3..1eb86c79523e 100644
--- a/drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c
+++ b/drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c
@@ -319,8 +319,7 @@ void oaktrail_hdmi_i2c_exit(struct pci_dev *dev)
 	struct hdmi_i2c_dev *i2c_dev;
 
 	hdmi_dev = pci_get_drvdata(dev);
-	if (i2c_del_adapter(&oaktrail_hdmi_i2c_adapter))
-		DRM_DEBUG_DRIVER("Failed to delete hdmi-i2c adapter\n");
+	i2c_del_adapter(&oaktrail_hdmi_i2c_adapter);
 
 	i2c_dev = hdmi_dev->i2c_dev;
 	kfree(i2c_dev);
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 378fcb5d5783..07f01ac853ff 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -169,11 +169,7 @@ static int __init amd756_s4882_init(void)
 	}
 
 	/* Unregister physical bus */
-	error = i2c_del_adapter(&amd756_smbus);
-	if (error) {
-		dev_err(&amd756_smbus.dev, "Physical bus removal failed\n");
-		goto ERROR0;
-	}
+	i2c_del_adapter(&amd756_smbus);
 
 	printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4882\n");
 	/* Define the 5 virtual adapters and algorithms structures */
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 75195e3f5ddb..6bb839b688be 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -603,15 +603,18 @@ static const struct of_device_id atmel_twi_dt_ids[] = {
 	}
 };
 MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids);
-#else
-#define atmel_twi_dt_ids NULL
 #endif
 
-static bool filter(struct dma_chan *chan, void *slave)
+static bool filter(struct dma_chan *chan, void *pdata)
 {
-	struct at_dma_slave *sl = slave;
+	struct at91_twi_pdata *sl_pdata = pdata;
+	struct at_dma_slave *sl;
+
+	if (!sl_pdata)
+		return false;
 
-	if (sl->dma_dev == chan->device->dev) {
+	sl = &sl_pdata->dma_slave;
+	if (sl && (sl->dma_dev == chan->device->dev)) {
 		chan->private = sl;
 		return true;
 	} else {
@@ -622,11 +625,10 @@ static bool filter(struct dma_chan *chan, void *slave)
 static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
 {
 	int ret = 0;
-	struct at_dma_slave *sdata;
+	struct at91_twi_pdata *pdata = dev->pdata;
 	struct dma_slave_config slave_config;
 	struct at91_twi_dma *dma = &dev->dma;
-
-	sdata = &dev->pdata->dma_slave;
+	dma_cap_mask_t mask;
 
 	memset(&slave_config, 0, sizeof(slave_config));
 	slave_config.src_addr = (dma_addr_t)phy_addr + AT91_TWI_RHR;
@@ -637,25 +639,22 @@ static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
 	slave_config.dst_maxburst = 1;
 	slave_config.device_fc = false;
 
-	if (sdata && sdata->dma_dev) {
-		dma_cap_mask_t mask;
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
 
-		dma_cap_zero(mask);
-		dma_cap_set(DMA_SLAVE, mask);
-		dma->chan_tx = dma_request_channel(mask, filter, sdata);
-		if (!dma->chan_tx) {
-			dev_err(dev->dev, "no DMA channel available for tx\n");
-			ret = -EBUSY;
-			goto error;
-		}
-		dma->chan_rx = dma_request_channel(mask, filter, sdata);
-		if (!dma->chan_rx) {
-			dev_err(dev->dev, "no DMA channel available for rx\n");
-			ret = -EBUSY;
-			goto error;
-		}
-	} else {
-		ret = -EINVAL;
+	dma->chan_tx = dma_request_slave_channel_compat(mask, filter, pdata,
+							dev->dev, "tx");
+	if (!dma->chan_tx) {
+		dev_err(dev->dev, "can't get a DMA channel for tx\n");
+		ret = -EBUSY;
+		goto error;
+	}
+
+	dma->chan_rx = dma_request_slave_channel_compat(mask, filter, pdata,
+							dev->dev, "rx");
+	if (!dma->chan_rx) {
+		dev_err(dev->dev, "can't get a DMA channel for rx\n");
+		ret = -EBUSY;
 		goto error;
 	}
 
@@ -785,12 +784,11 @@ static int at91_twi_probe(struct platform_device *pdev)
 static int at91_twi_remove(struct platform_device *pdev)
 {
 	struct at91_twi_dev *dev = platform_get_drvdata(pdev);
-	int rc;
 
-	rc = i2c_del_adapter(&dev->adapter);
+	i2c_del_adapter(&dev->adapter);
 	clk_disable_unprepare(dev->clk);
 
-	return rc;
+	return 0;
 }
 
 #ifdef CONFIG_PM
@@ -828,7 +826,7 @@ static struct platform_driver at91_twi_driver = {
 	.driver		= {
 		.name	= "at91_i2c",
 		.owner	= THIS_MODULE,
-		.of_match_table = atmel_twi_dt_ids,
+		.of_match_table = of_match_ptr(atmel_twi_dt_ids),
 		.pm	= at91_twi_pm_ops,
 	},
 };
diff --git a/drivers/i2c/busses/i2c-cbus-gpio.c b/drivers/i2c/busses/i2c-cbus-gpio.c
index 98386d659318..1be13ac11dc5 100644
--- a/drivers/i2c/busses/i2c-cbus-gpio.c
+++ b/drivers/i2c/busses/i2c-cbus-gpio.c
@@ -206,7 +206,9 @@ static int cbus_i2c_remove(struct platform_device *pdev)
 {
 	struct i2c_adapter *adapter = platform_get_drvdata(pdev);
 
-	return i2c_del_adapter(adapter);
+	i2c_del_adapter(adapter);
+
+	return 0;
 }
 
 static int cbus_i2c_probe(struct platform_device *pdev)
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 7d1e590a7bb6..cf20e06a88e1 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -137,7 +137,7 @@ static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
 }
 
 /* Generate a pulse on the i2c clock pin. */
-static void generic_i2c_clock_pulse(unsigned int scl_pin)
+static void davinci_i2c_clock_pulse(unsigned int scl_pin)
 {
 	u16 i;
 
@@ -155,7 +155,7 @@ static void generic_i2c_clock_pulse(unsigned int scl_pin)
 /* This routine does i2c bus recovery as specified in the
  * i2c protocol Rev. 03 section 3.16 titled "Bus clear"
  */
-static void i2c_recover_bus(struct davinci_i2c_dev *dev)
+static void davinci_i2c_recover_bus(struct davinci_i2c_dev *dev)
 {
 	u32 flag = 0;
 	struct davinci_i2c_platform_data *pdata = dev->pdata;
@@ -166,7 +166,7 @@ static void i2c_recover_bus(struct davinci_i2c_dev *dev)
 	flag |=  DAVINCI_I2C_MDR_NACK;
 	/* write the data into mode register */
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
-	generic_i2c_clock_pulse(pdata->scl_pin);
+	davinci_i2c_clock_pulse(pdata->scl_pin);
 	/* Send STOP */
 	flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
 	flag |= DAVINCI_I2C_MDR_STP;
@@ -289,7 +289,7 @@ static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev,
 				return -ETIMEDOUT;
 			} else {
 				to_cnt = 0;
-				i2c_recover_bus(dev);
+				davinci_i2c_recover_bus(dev);
 				i2c_davinci_init(dev);
 			}
 		}
@@ -379,7 +379,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 						      dev->adapter.timeout);
 	if (r == 0) {
 		dev_err(dev->dev, "controller timed out\n");
-		i2c_recover_bus(dev);
+		davinci_i2c_recover_bus(dev);
 		i2c_davinci_init(dev);
 		dev->buf_len = 0;
 		return -ETIMEDOUT;
@@ -643,7 +643,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 {
 	struct davinci_i2c_dev *dev;
 	struct i2c_adapter *adap;
-	struct resource *mem, *irq, *ioarea;
+	struct resource *mem, *irq;
 	int r;
 
 	/* NOTE: driver uses the static register mapping */
@@ -659,24 +659,18 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	ioarea = request_mem_region(mem->start, resource_size(mem),
-				    pdev->name);
-	if (!ioarea) {
-		dev_err(&pdev->dev, "I2C region already claimed\n");
-		return -EBUSY;
-	}
-
-	dev = kzalloc(sizeof(struct davinci_i2c_dev), GFP_KERNEL);
+	dev = devm_kzalloc(&pdev->dev, sizeof(struct davinci_i2c_dev),
+			GFP_KERNEL);
 	if (!dev) {
-		r = -ENOMEM;
-		goto err_release_region;
+		dev_err(&pdev->dev, "Memory allocation failed\n");
+		return -ENOMEM;
 	}
 
 	init_completion(&dev->cmd_complete);
 #ifdef CONFIG_CPU_FREQ
 	init_completion(&dev->xfr_complete);
 #endif
-	dev->dev = get_device(&pdev->dev);
+	dev->dev = &pdev->dev;
 	dev->irq = irq->start;
 	dev->pdata = dev->dev->platform_data;
 	platform_set_drvdata(pdev, dev);
@@ -686,10 +680,9 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 
 		dev->pdata = devm_kzalloc(&pdev->dev,
 			sizeof(struct davinci_i2c_platform_data), GFP_KERNEL);
-		if (!dev->pdata) {
-			r = -ENOMEM;
-			goto err_free_mem;
-		}
+		if (!dev->pdata)
+			return -ENOMEM;
+
 		memcpy(dev->pdata, &davinci_i2c_platform_data_default,
 			sizeof(struct davinci_i2c_platform_data));
 		if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
@@ -699,22 +692,21 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 		dev->pdata = &davinci_i2c_platform_data_default;
 	}
 
-	dev->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(dev->clk)) {
-		r = -ENODEV;
-		goto err_free_mem;
-	}
+	dev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk))
+		return -ENODEV;
 	clk_prepare_enable(dev->clk);
 
-	dev->base = ioremap(mem->start, resource_size(mem));
-	if (!dev->base) {
-		r = -EBUSY;
-		goto err_mem_ioremap;
+	dev->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(dev->base)) {
+		r = PTR_ERR(dev->base);
+		goto err_unuse_clocks;
 	}
 
 	i2c_davinci_init(dev);
 
-	r = request_irq(dev->irq, i2c_davinci_isr, 0, pdev->name, dev);
+	r = devm_request_irq(&pdev->dev, dev->irq, i2c_davinci_isr, 0,
+			pdev->name, dev);
 	if (r) {
 		dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
 		goto err_unuse_clocks;
@@ -723,7 +715,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	r = i2c_davinci_cpufreq_register(dev);
 	if (r) {
 		dev_err(&pdev->dev, "failed to register cpufreq\n");
-		goto err_free_irq;
+		goto err_unuse_clocks;
 	}
 
 	adap = &dev->adapter;
@@ -740,50 +732,31 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	r = i2c_add_numbered_adapter(adap);
 	if (r) {
 		dev_err(&pdev->dev, "failure adding adapter\n");
-		goto err_free_irq;
+		goto err_unuse_clocks;
 	}
 	of_i2c_register_devices(adap);
 
 	return 0;
 
-err_free_irq:
-	free_irq(dev->irq, dev);
 err_unuse_clocks:
-	iounmap(dev->base);
-err_mem_ioremap:
 	clk_disable_unprepare(dev->clk);
-	clk_put(dev->clk);
 	dev->clk = NULL;
-err_free_mem:
-	put_device(&pdev->dev);
-	kfree(dev);
-err_release_region:
-	release_mem_region(mem->start, resource_size(mem));
-
 	return r;
 }
 
 static int davinci_i2c_remove(struct platform_device *pdev)
 {
 	struct davinci_i2c_dev *dev = platform_get_drvdata(pdev);
-	struct resource *mem;
 
 	i2c_davinci_cpufreq_deregister(dev);
 
 	i2c_del_adapter(&dev->adapter);
-	put_device(&pdev->dev);
 
 	clk_disable_unprepare(dev->clk);
-	clk_put(dev->clk);
 	dev->clk = NULL;
 
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
-	free_irq(dev->irq, dev);
-	iounmap(dev->base);
-	kfree(dev);
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem->start, resource_size(mem));
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 94fd81875409..21fbb340ad66 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -68,6 +68,7 @@
 #define DW_IC_TXFLR		0x74
 #define DW_IC_RXFLR		0x78
 #define DW_IC_TX_ABRT_SOURCE	0x80
+#define DW_IC_ENABLE_STATUS	0x9c
 #define DW_IC_COMP_PARAM_1	0xf4
 #define DW_IC_COMP_TYPE		0xfc
 #define DW_IC_COMP_TYPE_VALUE	0x44570140
@@ -248,6 +249,27 @@ static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
 	return ((ic_clk * (tLOW + tf) + 5000) / 10000) - 1 + offset;
 }
 
+static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
+{
+	int timeout = 100;
+
+	do {
+		dw_writel(dev, enable, DW_IC_ENABLE);
+		if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
+			return;
+
+		/*
+		 * Wait 10 times the signaling period of the highest I2C
+		 * transfer supported by the driver (for 400KHz this is
+		 * 25us) as described in the DesignWare I2C databook.
+		 */
+		usleep_range(25, 250);
+	} while (timeout--);
+
+	dev_warn(dev->dev, "timeout in %sabling adapter\n",
+		 enable ? "en" : "dis");
+}
+
 /**
  * i2c_dw_init() - initialize the designware i2c master hardware
  * @dev: device private data
@@ -278,7 +300,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	}
 
 	/* Disable the adapter */
-	dw_writel(dev, 0, DW_IC_ENABLE);
+	__i2c_dw_enable(dev, false);
 
 	/* set standard and fast speed deviders for high/low periods */
 
@@ -333,7 +355,7 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
 			return -ETIMEDOUT;
 		}
 		timeout--;
-		mdelay(1);
+		usleep_range(1000, 1100);
 	}
 
 	return 0;
@@ -345,7 +367,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	u32 ic_con;
 
 	/* Disable the adapter */
-	dw_writel(dev, 0, DW_IC_ENABLE);
+	__i2c_dw_enable(dev, false);
 
 	/* set the slave (target) address */
 	dw_writel(dev, msgs[dev->msg_write_idx].addr, DW_IC_TAR);
@@ -359,7 +381,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	dw_writel(dev, ic_con, DW_IC_CON);
 
 	/* Enable the adapter */
-	dw_writel(dev, 1, DW_IC_ENABLE);
+	__i2c_dw_enable(dev, true);
 
 	/* Enable interrupts */
 	dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
@@ -565,7 +587,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	/* no error */
 	if (likely(!dev->cmd_err)) {
 		/* Disable the adapter */
-		dw_writel(dev, 0, DW_IC_ENABLE);
+		__i2c_dw_enable(dev, false);
 		ret = num;
 		goto done;
 	}
@@ -578,7 +600,8 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	ret = -EIO;
 
 done:
-	pm_runtime_put(dev->dev);
+	pm_runtime_mark_last_busy(dev->dev);
+	pm_runtime_put_autosuspend(dev->dev);
 	mutex_unlock(&dev->lock);
 
 	return ret;
@@ -700,7 +723,7 @@ EXPORT_SYMBOL_GPL(i2c_dw_isr);
 void i2c_dw_enable(struct dw_i2c_dev *dev)
 {
        /* Enable the adapter */
-	dw_writel(dev, 1, DW_IC_ENABLE);
+	__i2c_dw_enable(dev, true);
 }
 EXPORT_SYMBOL_GPL(i2c_dw_enable);
 
@@ -713,7 +736,7 @@ EXPORT_SYMBOL_GPL(i2c_dw_is_enabled);
 void i2c_dw_disable(struct dw_i2c_dev *dev)
 {
 	/* Disable controller */
-	dw_writel(dev, 0, DW_IC_ENABLE);
+	__i2c_dw_enable(dev, false);
 
 	/* Disable all interupts */
 	dw_writel(dev, 0, DW_IC_INTR_MASK);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 7c5e383c350d..f6ed06c966ee 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -208,68 +208,45 @@ static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
 }
 
 static int i2c_dw_pci_probe(struct pci_dev *pdev,
-const struct pci_device_id *id)
+			    const struct pci_device_id *id)
 {
 	struct dw_i2c_dev *dev;
 	struct i2c_adapter *adap;
-	unsigned long start, len;
-	void __iomem *base;
 	int r;
 	struct  dw_pci_controller *controller;
 
 	if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
-		printk(KERN_ERR "dw_i2c_pci_probe: invalid driver data %ld\n",
+		dev_err(&pdev->dev, "%s: invalid driver data %ld\n", __func__,
 			id->driver_data);
 		return -EINVAL;
 	}
 
 	controller = &dw_pci_controllers[id->driver_data];
 
-	r = pci_enable_device(pdev);
+	r = pcim_enable_device(pdev);
 	if (r) {
 		dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n",
 			r);
-		goto exit;
+		return r;
 	}
 
-	/* Determine the address of the I2C area */
-	start = pci_resource_start(pdev, 0);
-	len = pci_resource_len(pdev, 0);
-	if (!start || len == 0) {
-		dev_err(&pdev->dev, "base address not set\n");
-		r = -ENODEV;
-		goto exit;
-	}
-
-	r = pci_request_region(pdev, 0, DRIVER_NAME);
+	r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
 	if (r) {
-		dev_err(&pdev->dev, "failed to request I2C region "
-			"0x%lx-0x%lx\n", start,
-			(unsigned long)pci_resource_end(pdev, 0));
-		goto exit;
-	}
-
-	base = ioremap_nocache(start, len);
-	if (!base) {
 		dev_err(&pdev->dev, "I/O memory remapping failed\n");
-		r = -ENOMEM;
-		goto err_release_region;
+		return r;
 	}
 
-
-	dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
-	if (!dev) {
-		r = -ENOMEM;
-		goto err_release_region;
-	}
+	dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
 
 	init_completion(&dev->cmd_complete);
 	mutex_init(&dev->lock);
 	dev->clk = NULL;
 	dev->controller = controller;
 	dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
-	dev->base = base;
-	dev->dev = get_device(&pdev->dev);
+	dev->base = pcim_iomap_table(pdev)[0];
+	dev->dev = &pdev->dev;
 	dev->functionality =
 		I2C_FUNC_I2C |
 		I2C_FUNC_SMBUS_BYTE |
@@ -284,7 +261,7 @@ const struct pci_device_id *id)
 	dev->rx_fifo_depth = controller->rx_fifo_depth;
 	r = i2c_dw_init(dev);
 	if (r)
-		goto err_iounmap;
+		return r;
 
 	adap = &dev->adapter;
 	i2c_set_adapdata(adap, dev);
@@ -296,10 +273,11 @@ const struct pci_device_id *id)
 	snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci-%d",
 		adap->nr);
 
-	r = request_irq(pdev->irq, i2c_dw_isr, IRQF_SHARED, adap->name, dev);
+	r = devm_request_irq(&pdev->dev, pdev->irq, i2c_dw_isr, IRQF_SHARED,
+			adap->name, dev);
 	if (r) {
 		dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
-		goto err_iounmap;
+		return r;
 	}
 
 	i2c_dw_disable_int(dev);
@@ -307,24 +285,14 @@ const struct pci_device_id *id)
 	r = i2c_add_numbered_adapter(adap);
 	if (r) {
 		dev_err(&pdev->dev, "failure adding adapter\n");
-		goto err_free_irq;
+		return r;
 	}
 
-	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
+	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_allow(&pdev->dev);
 
 	return 0;
-
-err_free_irq:
-	free_irq(pdev->irq, dev);
-err_iounmap:
-	iounmap(dev->base);
-	put_device(&pdev->dev);
-	kfree(dev);
-err_release_region:
-	pci_release_region(pdev, 0);
-exit:
-	return r;
 }
 
 static void i2c_dw_pci_remove(struct pci_dev *pdev)
@@ -336,11 +304,6 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
 	pm_runtime_get_noresume(&pdev->dev);
 
 	i2c_del_adapter(&dev->adapter);
-	put_device(&pdev->dev);
-
-	free_irq(dev->irq, dev);
-	kfree(dev);
-	pci_release_region(pdev, 0);
 }
 
 /* work with hotplug and coldplug */
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index e3085c487ace..8ec91335d95a 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -56,20 +56,11 @@ static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
 static int dw_i2c_acpi_configure(struct platform_device *pdev)
 {
 	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
-	struct acpi_device *adev;
-	int busno, ret;
 
 	if (!ACPI_HANDLE(&pdev->dev))
 		return -ENODEV;
 
-	ret = acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev);
-	if (ret)
-		return -ENODEV;
-
 	dev->adapter.nr = -1;
-	if (adev->pnp.unique_id && !kstrtoint(adev->pnp.unique_id, 0, &busno))
-		dev->adapter.nr = busno;
-
 	dev->tx_fifo_depth = 32;
 	dev->rx_fifo_depth = 32;
 	return 0;
@@ -92,7 +83,7 @@ static int dw_i2c_probe(struct platform_device *pdev)
 {
 	struct dw_i2c_dev *dev;
 	struct i2c_adapter *adap;
-	struct resource *mem, *ioarea;
+	struct resource *mem;
 	int irq, r;
 
 	/* NOTE: driver uses the static register mapping */
@@ -108,32 +99,25 @@ static int dw_i2c_probe(struct platform_device *pdev)
 		return irq; /* -ENXIO */
 	}
 
-	ioarea = request_mem_region(mem->start, resource_size(mem),
-			pdev->name);
-	if (!ioarea) {
-		dev_err(&pdev->dev, "I2C region already claimed\n");
-		return -EBUSY;
-	}
+	dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
 
-	dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
-	if (!dev) {
-		r = -ENOMEM;
-		goto err_release_region;
-	}
+	dev->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(dev->base))
+		return PTR_ERR(dev->base);
 
 	init_completion(&dev->cmd_complete);
 	mutex_init(&dev->lock);
-	dev->dev = get_device(&pdev->dev);
+	dev->dev = &pdev->dev;
 	dev->irq = irq;
 	platform_set_drvdata(pdev, dev);
 
-	dev->clk = clk_get(&pdev->dev, NULL);
+	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
 
-	if (IS_ERR(dev->clk)) {
-		r = -ENODEV;
-		goto err_free_mem;
-	}
+	if (IS_ERR(dev->clk))
+		return PTR_ERR(dev->clk);
 	clk_prepare_enable(dev->clk);
 
 	dev->functionality =
@@ -146,13 +130,6 @@ static int dw_i2c_probe(struct platform_device *pdev)
 	dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
 		DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
 
-	dev->base = ioremap(mem->start, resource_size(mem));
-	if (dev->base == NULL) {
-		dev_err(&pdev->dev, "failure mapping io resources\n");
-		r = -EBUSY;
-		goto err_unuse_clocks;
-	}
-
 	/* Try first if we can configure the device from ACPI */
 	r = dw_i2c_acpi_configure(pdev);
 	if (r) {
@@ -164,13 +141,14 @@ static int dw_i2c_probe(struct platform_device *pdev)
 	}
 	r = i2c_dw_init(dev);
 	if (r)
-		goto err_iounmap;
+		return r;
 
 	i2c_dw_disable_int(dev);
-	r = request_irq(dev->irq, i2c_dw_isr, IRQF_SHARED, pdev->name, dev);
+	r = devm_request_irq(&pdev->dev, dev->irq, i2c_dw_isr, IRQF_SHARED,
+			pdev->name, dev);
 	if (r) {
 		dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
-		goto err_iounmap;
+		return r;
 	}
 
 	adap = &dev->adapter;
@@ -186,57 +164,32 @@ static int dw_i2c_probe(struct platform_device *pdev)
 	r = i2c_add_numbered_adapter(adap);
 	if (r) {
 		dev_err(&pdev->dev, "failure adding adapter\n");
-		goto err_free_irq;
+		return r;
 	}
 	of_i2c_register_devices(adap);
 	acpi_i2c_register_devices(adap);
 
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
+	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
-	pm_runtime_put(&pdev->dev);
 
 	return 0;
-
-err_free_irq:
-	free_irq(dev->irq, dev);
-err_iounmap:
-	iounmap(dev->base);
-err_unuse_clocks:
-	clk_disable_unprepare(dev->clk);
-	clk_put(dev->clk);
-	dev->clk = NULL;
-err_free_mem:
-	put_device(&pdev->dev);
-	kfree(dev);
-err_release_region:
-	release_mem_region(mem->start, resource_size(mem));
-
-	return r;
 }
 
 static int dw_i2c_remove(struct platform_device *pdev)
 {
 	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
-	struct resource *mem;
 
 	pm_runtime_get_sync(&pdev->dev);
 
 	i2c_del_adapter(&dev->adapter);
-	put_device(&pdev->dev);
-
-	clk_disable_unprepare(dev->clk);
-	clk_put(dev->clk);
-	dev->clk = NULL;
 
 	i2c_dw_disable(dev);
-	free_irq(dev->irq, dev);
-	kfree(dev);
 
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem->start, resource_size(mem));
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index f3fa4332bbdf..bc6e139c6e7f 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -85,23 +85,29 @@ static int i2c_gpio_getscl(void *data)
 	return gpio_get_value(pdata->scl_pin);
 }
 
-static int of_i2c_gpio_probe(struct device_node *np,
-			     struct i2c_gpio_platform_data *pdata)
+static int of_i2c_gpio_get_pins(struct device_node *np,
+				unsigned int *sda_pin, unsigned int *scl_pin)
 {
-	u32 reg;
-
 	if (of_gpio_count(np) < 2)
 		return -ENODEV;
 
-	pdata->sda_pin = of_get_gpio(np, 0);
-	pdata->scl_pin = of_get_gpio(np, 1);
+	*sda_pin = of_get_gpio(np, 0);
+	*scl_pin = of_get_gpio(np, 1);
 
-	if (!gpio_is_vali