diff options
author | Florian Fainelli <f.fainelli@gmail.com> | 2016-06-09 18:23:53 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2016-06-09 22:21:29 -0700 |
commit | 967dd82ffc52e9d8ea0defde094f9a39a3f4eeed (patch) | |
tree | 962fc28c7c18720f32cd6ac46cc8eb724c61455f /drivers | |
parent | 409a5f27ed1288b582fb164090c6eff17c74f5d4 (diff) |
net: dsa: b53: Add support for Broadcom RoboSwitch
This patch adds support for Broadcom's BCM53xx switch family, also known
as RoboSwitch. Some of these switches are ubiquituous, found in home
routers, Wi-Fi routers, DSL and cable modem gateways and other
networking related products.
This drivers adds the library driver (b53_common.c) as well as a few bus
glue drivers for MDIO, SPI, Switch Register Access Block (SRAB) and
memory-mapped I/O into a SoC's address space (Broadcom BCM63xx/33xx).
Basic operations are supported to bring the Layer 1/2 up and running,
but not much more at this point, subsequent patches add the remaining
features.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/dsa/Kconfig | 2 | ||||
-rw-r--r-- | drivers/net/dsa/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/dsa/b53/Kconfig | 33 | ||||
-rw-r--r-- | drivers/net/dsa/b53/Makefile | 6 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_common.c | 1158 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_mdio.c | 381 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_mmap.c | 260 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_priv.h | 322 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_regs.h | 358 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_spi.c | 331 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_srab.c | 415 |
11 files changed, 3268 insertions, 0 deletions
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index 200663c43ce9..be481e15ec9b 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -28,4 +28,6 @@ config NET_DSA_BCM_SF2 This enables support for the Broadcom Starfighter 2 Ethernet switch chips. +source "drivers/net/dsa/b53/Kconfig" + endmenu diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index 76b751dd9efd..97bc70a7f3c7 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -1,3 +1,5 @@ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o + +obj-y += b53/ diff --git a/drivers/net/dsa/b53/Kconfig b/drivers/net/dsa/b53/Kconfig new file mode 100644 index 000000000000..27f32a50df57 --- /dev/null +++ b/drivers/net/dsa/b53/Kconfig @@ -0,0 +1,33 @@ +menuconfig B53 + tristate "Broadcom BCM53xx managed switch support" + depends on NET_DSA + help + This driver adds support for Broadcom managed switch chips. It supports + BCM5325E, BCM5365, BCM539x, BCM53115 and BCM53125 as well as BCM63XX + integrated switches. + +config B53_SPI_DRIVER + tristate "B53 SPI connected switch driver" + depends on B53 && SPI + help + Select to enable support for registering switches configured through SPI. + +config B53_MDIO_DRIVER + tristate "B53 MDIO connected switch driver" + depends on B53 + help + Select to enable support for registering switches configured through MDIO. + +config B53_MMAP_DRIVER + tristate "B53 MMAP connected switch driver" + depends on B53 && HAS_IOMEM + help + Select to enable support for memory-mapped switches like the BCM63XX + integrated switches. + +config B53_SRAB_DRIVER + tristate "B53 SRAB connected switch driver" + depends on B53 && HAS_IOMEM + help + Select to enable support for memory-mapped Switch Register Access + Bridge Registers (SRAB) like it is found on the BCM53010 diff --git a/drivers/net/dsa/b53/Makefile b/drivers/net/dsa/b53/Makefile new file mode 100644 index 000000000000..7e6f9a8bfd75 --- /dev/null +++ b/drivers/net/dsa/b53/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_B53) += b53_common.o + +obj-$(CONFIG_B53_SPI_DRIVER) += b53_spi.o +obj-$(CONFIG_B53_MDIO_DRIVER) += b53_mdio.o +obj-$(CONFIG_B53_MMAP_DRIVER) += b53_mmap.o +obj-$(CONFIG_B53_SRAB_DRIVER) += b53_srab.o diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c new file mode 100644 index 000000000000..6f0337d6dfa4 --- /dev/null +++ b/drivers/net/dsa/b53/b53_common.c @@ -0,0 +1,1158 @@ +/* + * B53 switch driver main logic + * + * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org> + * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_data/b53.h> +#include <linux/phy.h> +#include <net/dsa.h> + +#include "b53_regs.h" +#include "b53_priv.h" + +struct b53_mib_desc { + u8 size; + u8 offset; + const char *name; +}; + +/* BCM5365 MIB counters */ +static const struct b53_mib_desc b53_mibs_65[] = { + { 8, 0x00, "TxOctets" }, + { 4, 0x08, "TxDropPkts" }, + { 4, 0x10, "TxBroadcastPkts" }, + { 4, 0x14, "TxMulticastPkts" }, + { 4, 0x18, "TxUnicastPkts" }, + { 4, 0x1c, "TxCollisions" }, + { 4, 0x20, "TxSingleCollision" }, + { 4, 0x24, "TxMultipleCollision" }, + { 4, 0x28, "TxDeferredTransmit" }, + { 4, 0x2c, "TxLateCollision" }, + { 4, 0x30, "TxExcessiveCollision" }, + { 4, 0x38, "TxPausePkts" }, + { 8, 0x44, "RxOctets" }, + { 4, 0x4c, "RxUndersizePkts" }, + { 4, 0x50, "RxPausePkts" }, + { 4, 0x54, "Pkts64Octets" }, + { 4, 0x58, "Pkts65to127Octets" }, + { 4, 0x5c, "Pkts128to255Octets" }, + { 4, 0x60, "Pkts256to511Octets" }, + { 4, 0x64, "Pkts512to1023Octets" }, + { 4, 0x68, "Pkts1024to1522Octets" }, + { 4, 0x6c, "RxOversizePkts" }, + { 4, 0x70, "RxJabbers" }, + { 4, 0x74, "RxAlignmentErrors" }, + { 4, 0x78, "RxFCSErrors" }, + { 8, 0x7c, "RxGoodOctets" }, + { 4, 0x84, "RxDropPkts" }, + { 4, 0x88, "RxUnicastPkts" }, + { 4, 0x8c, "RxMulticastPkts" }, + { 4, 0x90, "RxBroadcastPkts" }, + { 4, 0x94, "RxSAChanges" }, + { 4, 0x98, "RxFragments" }, +}; + +#define B53_MIBS_65_SIZE ARRAY_SIZE(b53_mibs_65) + +/* BCM63xx MIB counters */ +static const struct b53_mib_desc b53_mibs_63xx[] = { + { 8, 0x00, "TxOctets" }, + { 4, 0x08, "TxDropPkts" }, + { 4, 0x0c, "TxQoSPkts" }, + { 4, 0x10, "TxBroadcastPkts" }, + { 4, 0x14, "TxMulticastPkts" }, + { 4, 0x18, "TxUnicastPkts" }, + { 4, 0x1c, "TxCollisions" }, + { 4, 0x20, "TxSingleCollision" }, + { 4, 0x24, "TxMultipleCollision" }, + { 4, 0x28, "TxDeferredTransmit" }, + { 4, 0x2c, "TxLateCollision" }, + { 4, 0x30, "TxExcessiveCollision" }, + { 4, 0x38, "TxPausePkts" }, + { 8, 0x3c, "TxQoSOctets" }, + { 8, 0x44, "RxOctets" }, + { 4, 0x4c, "RxUndersizePkts" }, + { 4, 0x50, "RxPausePkts" }, + { 4, 0x54, "Pkts64Octets" }, + { 4, 0x58, "Pkts65to127Octets" }, + { 4, 0x5c, "Pkts128to255Octets" }, + { 4, 0x60, "Pkts256to511Octets" }, + { 4, 0x64, "Pkts512to1023Octets" }, + { 4, 0x68, "Pkts1024to1522Octets" }, + { 4, 0x6c, "RxOversizePkts" }, + { 4, 0x70, "RxJabbers" }, + { 4, 0x74, "RxAlignmentErrors" }, + { 4, 0x78, "RxFCSErrors" }, + { 8, 0x7c, "RxGoodOctets" }, + { 4, 0x84, "RxDropPkts" }, + { 4, 0x88, "RxUnicastPkts" }, + { 4, 0x8c, "RxMulticastPkts" }, + { 4, 0x90, "RxBroadcastPkts" }, + { 4, 0x94, "RxSAChanges" }, + { 4, 0x98, "RxFragments" }, + { 4, 0xa0, "RxSymbolErrors" }, + { 4, 0xa4, "RxQoSPkts" }, + { 8, 0xa8, "RxQoSOctets" }, + { 4, 0xb0, "Pkts1523to2047Octets" }, + { 4, 0xb4, "Pkts2048to4095Octets" }, + { 4, 0xb8, "Pkts4096to8191Octets" }, + { 4, 0xbc, "Pkts8192to9728Octets" }, + { 4, 0xc0, "RxDiscarded" }, +}; + +#define B53_MIBS_63XX_SIZE ARRAY_SIZE(b53_mibs_63xx) + +/* MIB counters */ +static const struct b53_mib_desc b53_mibs[] = { + { 8, 0x00, "TxOctets" }, + { 4, 0x08, "TxDropPkts" }, + { 4, 0x10, "TxBroadcastPkts" }, + { 4, 0x14, "TxMulticastPkts" }, + { 4, 0x18, "TxUnicastPkts" }, + { 4, 0x1c, "TxCollisions" }, + { 4, 0x20, "TxSingleCollision" }, + { 4, 0x24, "TxMultipleCollision" }, + { 4, 0x28, "TxDeferredTransmit" }, + { 4, 0x2c, "TxLateCollision" }, + { 4, 0x30, "TxExcessiveCollision" }, + { 4, 0x38, "TxPausePkts" }, + { 8, 0x50, "RxOctets" }, + { 4, 0x58, "RxUndersizePkts" }, + { 4, 0x5c, "RxPausePkts" }, + { 4, 0x60, "Pkts64Octets" }, + { 4, 0x64, "Pkts65to127Octets" }, + { 4, 0x68, "Pkts128to255Octets" }, + { 4, 0x6c, "Pkts256to511Octets" }, + { 4, 0x70, "Pkts512to1023Octets" }, + { 4, 0x74, "Pkts1024to1522Octets" }, + { 4, 0x78, "RxOversizePkts" }, + { 4, 0x7c, "RxJabbers" }, + { 4, 0x80, "RxAlignmentErrors" }, + { 4, 0x84, "RxFCSErrors" }, + { 8, 0x88, "RxGoodOctets" }, + { 4, 0x90, "RxDropPkts" }, + { 4, 0x94, "RxUnicastPkts" }, + { 4, 0x98, "RxMulticastPkts" }, + { 4, 0x9c, "RxBroadcastPkts" }, + { 4, 0xa0, "RxSAChanges" }, + { 4, 0xa4, "RxFragments" }, + { 4, 0xa8, "RxJumboPkts" }, + { 4, 0xac, "RxSymbolErrors" }, + { 4, 0xc0, "RxDiscarded" }, +}; + +#define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs) + +static int b53_do_vlan_op(struct b53_device *dev, u8 op) +{ + unsigned int i; + + b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op); + + for (i = 0; i < 10; i++) { + u8 vta; + + b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta); + if (!(vta & VTA_START_CMD)) + return 0; + + usleep_range(100, 200); + } + + return -EIO; +} + +static void b53_set_vlan_entry(struct b53_device *dev, u16 vid, u16 members, + u16 untag) +{ + if (is5325(dev)) { + u32 entry = 0; + + if (members) { + entry = ((untag & VA_UNTAG_MASK_25) << VA_UNTAG_S_25) | + members; + if (dev->core_rev >= 3) + entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S; + else + entry |= VA_VALID_25; + } + + b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry); + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid | + VTA_RW_STATE_WR | VTA_RW_OP_EN); + } else if (is5365(dev)) { + u16 entry = 0; + + if (members) + entry = ((untag & VA_UNTAG_MASK_65) << VA_UNTAG_S_65) | + members | VA_VALID_65; + + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry); + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid | + VTA_RW_STATE_WR | VTA_RW_OP_EN); + } else { + b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid); + b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], + (untag << VTE_UNTAG_S) | members); + + b53_do_vlan_op(dev, VTA_CMD_WRITE); + } +} + +void b53_set_forwarding(struct b53_device *dev, int enable) +{ + u8 mgmt; + + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); + + if (enable) + mgmt |= SM_SW_FWD_EN; + else + mgmt &= ~SM_SW_FWD_EN; + + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); +} + +static void b53_enable_vlan(struct b53_device *dev, int enable) +{ + u8 mgmt, vc0, vc1, vc4 = 0, vc5; + + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1); + + if (is5325(dev) || is5365(dev)) { + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5); + } else if (is63xx(dev)) { + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5); + } else { + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5); + } + + mgmt &= ~SM_SW_FWD_MODE; + + if (enable) { + vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID; + vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN; + vc4 &= ~VC4_ING_VID_CHECK_MASK; + vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S; + vc5 |= VC5_DROP_VTABLE_MISS; + + if (is5325(dev)) + vc0 &= ~VC0_RESERVED_1; + + if (is5325(dev) || is5365(dev)) + vc1 |= VC1_RX_MCST_TAG_EN; + + if (!is5325(dev) && !is5365(dev)) { + if (dev->allow_vid_4095) + vc5 |= VC5_VID_FFF_EN; + else + vc5 &= ~VC5_VID_FFF_EN; + } + } else { + vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID); + vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN); + vc4 &= ~VC4_ING_VID_CHECK_MASK; + vc5 &= ~VC5_DROP_VTABLE_MISS; + + if (is5325(dev) || is5365(dev)) + vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S; + else + vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S; + + if (is5325(dev) || is5365(dev)) + vc1 &= ~VC1_RX_MCST_TAG_EN; + + if (!is5325(dev) && !is5365(dev)) + vc5 &= ~VC5_VID_FFF_EN; + } + + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1); + + if (is5325(dev) || is5365(dev)) { + /* enable the high 8 bit vid check on 5325 */ + if (is5325(dev) && enable) + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, + VC3_HIGH_8BIT_EN); + else + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0); + + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5); + } else if (is63xx(dev)) { + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5); + } else { + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5); + } + + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); +} + +static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100) +{ + u32 port_mask = 0; + u16 max_size = JMS_MIN_SIZE; + + if (is5325(dev) || is5365(dev)) + return -EINVAL; + + if (enable) { + port_mask = dev->enabled_ports; + max_size = JMS_MAX_SIZE; + if (allow_10_100) + port_mask |= JPM_10_100_JUMBO_EN; + } + + b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask); + return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size); +} + +static int b53_flush_arl(struct b53_device *dev) +{ + unsigned int i; + + b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, + FAST_AGE_DONE | FAST_AGE_DYNAMIC | FAST_AGE_STATIC); + + for (i = 0; i < 10; i++) { + u8 fast_age_ctrl; + + b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, + &fast_age_ctrl); + + if (!(fast_age_ctrl & FAST_AGE_DONE)) + goto out; + + msleep(1); + } + + return -ETIMEDOUT; +out: + /* Only age dynamic entries (default behavior) */ + b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC); + return 0; +} + +static int b53_enable_port(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct b53_device *dev = ds_to_priv(ds); + + /* Clear the Rx and Tx disable bits and set to no spanning tree */ + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0); + + return 0; +} + +static void b53_disable_port(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct b53_device *dev = ds_to_priv(ds); + u8 reg; + + /* Disable Tx/Rx for the port */ + b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®); + reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE; + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg); +} + +static void b53_enable_cpu_port(struct b53_device *dev) +{ + unsigned int cpu_port = dev->cpu_port; + u8 port_ctrl; + + /* BCM5325 CPU port is at 8 */ + if ((is5325(dev) || is5365(dev)) && cpu_port == B53_CPU_PORT_25) + cpu_port = B53_CPU_PORT; + + port_ctrl = PORT_CTRL_RX_BCST_EN | + PORT_CTRL_RX_MCST_EN | + PORT_CTRL_RX_UCST_EN; + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(cpu_port), port_ctrl); +} + +static void b53_enable_mib(struct b53_device *dev) +{ + u8 gc; + + b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); + gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN); + b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc); +} + +static int b53_configure_vlan(struct b53_device *dev) +{ + int i; + + /* clear all vlan entries */ + if (is5325(dev) || is5365(dev)) { + for (i = 1; i < dev->num_vlans; i++) + b53_set_vlan_entry(dev, i, 0, 0); + } else { + b53_do_vlan_op(dev, VTA_CMD_CLEAR); + } + + b53_enable_vlan(dev, false); + + b53_for_each_port(dev, i) + b53_write16(dev, B53_VLAN_PAGE, + B53_VLAN_PORT_DEF_TAG(i), 1); + + if (!is5325(dev) && !is5365(dev)) + b53_set_jumbo(dev, dev->enable_jumbo, false); + + return 0; +} + +static void b53_switch_reset_gpio(struct b53_device *dev) +{ + int gpio = dev->reset_gpio; + + if (gpio < 0) + return; + + /* Reset sequence: RESET low(50ms)->high(20ms) + */ + gpio_set_value(gpio, 0); + mdelay(50); + + gpio_set_value(gpio, 1); + mdelay(20); + + dev->current_page = 0xff; +} + +static int b53_switch_reset(struct b53_device *dev) +{ + u8 mgmt; + + b53_switch_reset_gpio(dev); + + if (is539x(dev)) { + b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83); + b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00); + } + + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); + + if (!(mgmt & SM_SW_FWD_EN)) { + mgmt &= ~SM_SW_FWD_MODE; + mgmt |= SM_SW_FWD_EN; + + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); + + if (!(mgmt & SM_SW_FWD_EN)) { + dev_err(dev->dev, "Failed to enable switch!\n"); + return -EINVAL; + } + } + + b53_enable_mib(dev); + + return b53_flush_arl(dev); +} + +static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg) +{ + struct b53_device *priv = ds_to_priv(ds); + u16 value = 0; + int ret; + + if (priv->ops->phy_read16) + ret = priv->ops->phy_read16(priv, addr, reg, &value); + else + ret = b53_read16(priv, B53_PORT_MII_PAGE(addr), + reg * 2, &value); + + return ret ? ret : value; +} + +static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val) +{ + struct b53_device *priv = ds_to_priv(ds); + + if (priv->ops->phy_write16) + return priv->ops->phy_write16(priv, addr, reg, val); + + return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val); +} + +static int b53_reset_switch(struct b53_device *priv) +{ + /* reset vlans */ + priv->enable_jumbo = false; + + memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports); + + return b53_switch_reset(priv); +} + +static int b53_apply_config(struct b53_device *priv) +{ + /* disable switching */ + b53_set_forwarding(priv, 0); + + b53_configure_vlan(priv); + + /* enable switching */ + b53_set_forwarding(priv, 1); + + return 0; +} + +static void b53_reset_mib(struct b53_device *priv) +{ + u8 gc; + + b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); + + b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB); + msleep(1); + b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB); + msleep(1); +} + +static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev) +{ + if (is5365(dev)) + return b53_mibs_65; + else if (is63xx(dev)) + return b53_mibs_63xx; + else + return b53_mibs; +} + +static unsigned int b53_get_mib_size(struct b53_device *dev) +{ + if (is5365(dev)) + return B53_MIBS_65_SIZE; + else if (is63xx(dev)) + return B53_MIBS_63XX_SIZE; + else + return B53_MIBS_SIZE; +} + +static void b53_get_strings(struct dsa_switch *ds, int port, uint8_t *data) +{ + struct b53_device *dev = ds_to_priv(ds); + const struct b53_mib_desc *mibs = b53_get_mib(dev); + unsigned int mib_size = b53_get_mib_size(dev); + unsigned int i; + + for (i = 0; i < mib_size; i++) + memcpy(data + i * ETH_GSTRING_LEN, + mibs[i].name, ETH_GSTRING_LEN); +} + +static void b53_get_ethtool_stats(struct dsa_switch *ds, int port, + uint64_t *data) +{ + struct b53_device *dev = ds_to_priv(ds); + const struct b53_mib_desc *mibs = b53_get_mib(dev); + unsigned int mib_size = b53_get_mib_size(dev); + const struct b53_mib_desc *s; + unsigned int i; + u64 val = 0; + + if (is5365(dev) && port == 5) + port = 8; + + mutex_lock(&dev->stats_mutex); + + for (i = 0; i < mib_size; i++) { + s = &mibs[i]; + + if (mibs->size == 8) { + b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val); + } else { + u32 val32; + + b53_read32(dev, B53_MIB_PAGE(port), s->offset, + &val32); + val = val32; + } + data[i] = (u64)val; + } + + mutex_unlock(&dev->stats_mutex); +} + +static int b53_get_sset_count(struct dsa_switch *ds) +{ + struct b53_device *dev = ds_to_priv(ds); + + return b53_get_mib_size(dev); +} + +static int b53_set_addr(struct dsa_switch *ds, u8 *addr) +{ + return 0; +} + +static int b53_setup(struct dsa_switch *ds) +{ + struct b53_device *dev = ds_to_priv(ds); + unsigned int port; + int ret; + + ret = b53_reset_switch(dev); + if (ret) { + dev_err(ds->dev, "failed to reset switch\n"); + return ret; + } + + b53_reset_mib(dev); + + ret = b53_apply_config(dev); + if (ret) + dev_err(ds->dev, "failed to apply configuration\n"); + + for (port = 0; port < dev->num_ports; port++) { + if (BIT(port) & ds->enabled_port_mask) + b53_enable_port(ds, port, NULL); + else if (dsa_is_cpu_port(ds, port)) + b53_enable_cpu_port(dev); + else + b53_disable_port(ds, port, NULL); + } + + return ret; +} + +static void b53_adjust_link(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct b53_device *dev = ds_to_priv(ds); + u8 rgmii_ctrl = 0, reg = 0, off; + + if (!phy_is_pseudo_fixed_link(phydev)) + return; + + /* Override the port settings */ + if (port == dev->cpu_port) { + off = B53_PORT_OVERRIDE_CTRL; + reg = PORT_OVERRIDE_EN; + } else { + off = B53_GMII_PORT_OVERRIDE_CTRL(port); + reg = GMII_PO_EN; + } + + /* Set the link UP */ + if (phydev->link) + reg |= PORT_OVERRIDE_LINK; + + if (phydev->duplex == DUPLEX_FULL) + reg |= PORT_OVERRIDE_FULL_DUPLEX; + + switch (phydev->speed) { + case 2000: + reg |= PORT_OVERRIDE_SPEED_2000M; + /* fallthrough */ + case SPEED_1000: + reg |= PORT_OVERRIDE_SPEED_1000M; + break; + case SPEED_100: + reg |= PORT_OVERRIDE_SPEED_100M; + break; + case SPEED_10: + reg |= PORT_OVERRIDE_SPEED_10M; + break; + default: + dev_err(ds->dev, "unknown speed: %d\n", phydev->speed); + return; + } + + /* Enable flow control on BCM5301x's CPU port */ + if (is5301x(dev) && port == dev->cpu_port) + reg |= PORT_OVERRIDE_RX_FLOW | PORT_OVERRIDE_TX_FLOW; + + if (phydev->pause) { + if (phydev->asym_pause) + reg |= PORT_OVERRIDE_TX_FLOW; + reg |= PORT_OVERRIDE_RX_FLOW; + } + + b53_write8(dev, B53_CTRL_PAGE, off, reg); + + if (is531x5(dev) && phy_interface_is_rgmii(phydev)) { + if (port == 8) + off = B53_RGMII_CTRL_IMP; + else + off = B53_RGMII_CTRL_P(port); + + /* Configure the port RGMII clock delay by DLL disabled and + * tx_clk aligned timing (restoring to reset defaults) + */ + b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); + rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC | + RGMII_CTRL_TIMING_SEL); + + /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make + * sure that we enable the port TX clock internal delay to + * account for this internal delay that is inserted, otherwise + * the switch won't be able to receive correctly. + * + * PHY_INTERFACE_MODE_RGMII means that we are not introducing + * any delay neither on transmission nor reception, so the + * BCM53125 must also be configured accordingly to account for + * the lack of delay and introduce + * + * The BCM53125 switch has its RX clock and TX clock control + * swapped, hence the reason why we modify the TX clock path in + * the "RGMII" case + */ + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) + rgmii_ctrl |= RGMII_CTRL_DLL_TXC; + if (phydev->interface == PHY_INTERFACE_MODE_RGMII) + rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC; + rgmii_ctrl |= RGMII_CTRL_TIMING_SEL; + b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); + + dev_info(ds->dev, "Configured port %d for %s\n", port, + phy_modes(phydev->interface)); + } + + /* configure MII port if necessary */ + if (is5325(dev)) { + b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, + ®); + + /* reverse mii needs to be enabled */ + if (!(reg & PORT_OVERRIDE_RV_MII_25)) { + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, + reg | PORT_OVERRIDE_RV_MII_25); + b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, + ®); + + if (!(reg & PORT_OVERRIDE_RV_MII_25)) { + dev_err(ds->dev, + "Failed to enable reverse MII mode\n"); + return; + } + } + } else if (is5301x(dev)) { + if (port != dev->cpu_port) { + u8 po_reg = B53_GMII_PORT_OVERRIDE_CTRL(dev->cpu_port); + u8 gmii_po; + + b53_read8(dev, B53_CTRL_PAGE, po_reg, &gmii_po); + gmii_po |= GMII_PO_LINK | + GMII_PO_RX_FLOW | + GMII_PO_TX_FLOW | + GMII_PO_EN | + GMII_PO_SPEED_2000M; + b53_write8(dev, B53_CTRL_PAGE, po_reg, gmii_po); + } + } +} + +static struct dsa_switch_driver b53_switch_ops = { + .tag_protocol = DSA_TAG_PROTO_NONE, + .setup = b53_setup, + .set_addr = b53_set_addr, + .get_strings = b53_get_strings, + .get_ethtool_stats = b53_get_ethtool_stats, + .get_sset_count = b53_get_sset_count, + .phy_read = b53_phy_read16, + .phy_write = b53_phy_write16, + .adjust_link = b53_adjust_link, + .port_enable = b53_enable_port, + .port_disable = b53_disable_port, +}; + +struct b53_chip_data { + u32 chip_id; + const char *dev_name; + u16 vlans; + u16 enabled_ports; + u8 cpu_port; + u8 vta_regs[3]; + u8 duplex_reg; + u8 jumbo_pm_reg; + u8 jumbo_size_reg; +}; + +#define B53_VTA_REGS \ + { B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY } +#define B53_VTA_REGS_9798 \ + { B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 } +#define B53_VTA_REGS_63XX \ + { B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX } + +static const struct b53_chip_data b53_switch_chips[] = { + { + .chip_id = BCM5325_DEVICE_ID, + .dev_name = "BCM5325", + .vlans = 16, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT_25, + .duplex_reg = B53_DUPLEX_STAT_FE, + }, + { + .chip_id = BCM5365_DEVICE_ID, + .dev_name = "BCM5365", + .vlans = 256, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT_25, + .duplex_reg = B53_DUPLEX_STAT_FE, + }, + { + .chip_id = BCM5395_DEVICE_ID, + .dev_name = "BCM5395", + .vlans = 4096, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM5397_DEVICE_ID, + .dev_name = "BCM5397", + .vlans = 4096, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS_9798, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM5398_DEVICE_ID, + .dev_name = "BCM5398", + .vlans = 4096, + .enabled_ports = 0x7f, + .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS_9798, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53115_DEVICE_ID, + .dev_name = "BCM53115", + .vlans = 4096, + .enabled_ports = 0x1f, + .vta_regs = B53_VTA_REGS, + .cpu_port = B53_CPU_PORT, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53125_DEVICE_ID, + .dev_name = "BCM53125", + .vlans = 4096, + .enabled_ports = 0xff, + .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53128_DEVICE_ID, + .dev_name = "BCM53128", + .vlans = 4096, + .enabled_ports = 0x1ff, + .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM63XX_DEVICE_ID, + .dev_name = "BCM63xx", + .vlans = 4096, + .enabled_ports = 0, /* pdata must provide them */ + .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS_63XX, + .duplex_reg = B53_DUPLEX_STAT_63XX, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX, + }, + { + .chip_id = BCM53010_DEVICE_ID, + .dev_name = "BCM53010", + .vlans = 4096, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53011_DEVICE_ID, + .dev_name = "BCM53011", + .vlans = 4096, + .enabled_ports = 0x1bf, + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53012_DEVICE_ID, + .dev_name = "BCM53012", + .vlans = 4096, + .enabled_ports = 0x1bf, + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53018_DEVICE_ID, + .dev_name = "BCM53018", + .vlans = 4096, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53019_DEVICE_ID, + .dev_name = "BCM53019", + .vlans = 4096, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, +}; + +static int b53_switch_init(struct b53_device *dev) +{ + struct dsa_switch *ds = dev->ds; + unsigned int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) { + const struct b53_chip_data *chip = &b53_switch_chips[i]; + + if (chip->chip_id == dev->chip_id) { + if (!dev->enabled_ports) + dev->enabled_ports = chip->enabled_ports; + dev->name = chip->dev_name; + dev->duplex_reg = chip->duplex_reg; + dev->vta_regs[0] = chip->vta_regs[0]; + dev->vta_regs[1] = chip->vta_regs[1]; + dev->vta_regs[2] = chip->vta_regs[2]; + dev->jumbo_pm_reg = chip->jumbo_pm_reg; + ds->drv = &b53_switch_ops; + dev->cpu_port = chip->cpu_port; + dev->num_vlans = chip->vlans; + break; + } + } + + /* check which BCM5325x version we have */ + if (is5325(dev)) { + u8 vc4; + + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4); + + /* check reserved bits */ + switch (vc4 & 3) { + case 1: + /* BCM5325E */ + break; + case 3: + /* BCM5325F - do not use port 4 */ + dev->enabled_ports &= ~BIT(4); + break; + default: +/* On the BCM47XX SoCs this is the supported internal switch.*/ +#ifndef CONFIG_BCM47XX |