diff options
author | Michael Walle <michael@walle.cc> | 2020-04-20 20:21:12 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-04-22 12:14:18 -0700 |
commit | 6937602ed3f9ebd46ed6a6b5e609c0ae4ed99008 (patch) | |
tree | 3ded2cb58e5ed1338b50e68f3b7658b44fa7a3ba /drivers | |
parent | 0a32f1ff2a2e41404deaba5fb32f8a0d640c0974 (diff) |
net: phy: add Broadcom BCM54140 support
The Broadcom BCM54140 is a Quad SGMII/QSGMII Copper/Fiber Gigabit
Ethernet transceiver.
This also adds support for tunables to set and get downshift and
energy detect auto power-down.
The PHY has four ports and each port has its own PHY address.
There are per-port registers as well as global registers.
Unfortunately, the global registers can only be accessed by reading
and writing from/to the PHY address of the first port. Further,
there is no way to find out what port you actually are by just
reading the per-port registers. We therefore, have to scan the
bus on the PHY probe to determine the port and thus what address
we need to access the global registers.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/phy/Kconfig | 10 | ||||
-rw-r--r-- | drivers/net/phy/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/phy/bcm54140.c | 481 |
3 files changed, 492 insertions, 0 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 3fa33d27eeba..cb7936b577de 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -346,6 +346,16 @@ config BROADCOM_PHY Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, BCM5481, BCM54810 and BCM5482 PHYs. +config BCM54140_PHY + tristate "Broadcom BCM54140 PHY" + depends on PHYLIB + select BCM_NET_PHYLIB + help + Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY. + + This driver also supports the hardware monitoring of this PHY and + exposes voltage and temperature sensors. + config BCM84881_PHY tristate "Broadcom BCM84881 PHY" depends on PHYLIB diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 2f5c7093a65b..cd345b75d127 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o +obj-$(CONFIG_BCM54140_PHY) += bcm54140.o obj-$(CONFIG_BCM84881_PHY) += bcm84881.o obj-$(CONFIG_CICADA_PHY) += cicada.o obj-$(CONFIG_CORTINA_PHY) += cortina.o diff --git a/drivers/net/phy/bcm54140.c b/drivers/net/phy/bcm54140.c new file mode 100644 index 000000000000..0eeb60de67f8 --- /dev/null +++ b/drivers/net/phy/bcm54140.c @@ -0,0 +1,481 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Broadcom BCM54140 Quad SGMII/QSGMII Copper/Fiber Gigabit PHY + * + * Copyright (c) 2020 Michael Walle <michael@walle.cc> + */ + +#include <linux/bitfield.h> +#include <linux/brcmphy.h> +#include <linux/module.h> +#include <linux/phy.h> + +#include "bcm-phy-lib.h" + +/* RDB per-port registers + */ +#define BCM54140_RDB_ISR 0x00a /* interrupt status */ +#define BCM54140_RDB_IMR 0x00b /* interrupt mask */ +#define BCM54140_RDB_INT_LINK BIT(1) /* link status changed */ +#define BCM54140_RDB_INT_SPEED BIT(2) /* link speed change */ +#define BCM54140_RDB_INT_DUPLEX BIT(3) /* duplex mode changed */ +#define BCM54140_RDB_SPARE1 0x012 /* spare control 1 */ +#define BCM54140_RDB_SPARE1_LSLM BIT(2) /* link speed LED mode */ +#define BCM54140_RDB_SPARE2 0x014 /* spare control 2 */ +#define BCM54140_RDB_SPARE2_WS_RTRY_DIS BIT(8) /* wirespeed retry disable */ +#define BCM54140_RDB_SPARE2_WS_RTRY_LIMIT GENMASK(4, 2) /* retry limit */ +#define BCM54140_RDB_SPARE3 0x015 /* spare control 3 */ +#define BCM54140_RDB_SPARE3_BIT0 BIT(0) +#define BCM54140_RDB_LED_CTRL 0x019 /* LED control */ +#define BCM54140_RDB_LED_CTRL_ACTLINK0 BIT(4) +#define BCM54140_RDB_LED_CTRL_ACTLINK1 BIT(8) +#define BCM54140_RDB_C_APWR 0x01a /* auto power down control */ +#define BCM54140_RDB_C_APWR_SINGLE_PULSE BIT(8) /* single pulse */ +#define BCM54140_RDB_C_APWR_APD_MODE_DIS 0 /* ADP disable */ +#define BCM54140_RDB_C_APWR_APD_MODE_EN 1 /* ADP enable */ +#define BCM54140_RDB_C_APWR_APD_MODE_DIS2 2 /* ADP disable */ +#define BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG 3 /* ADP enable w/ aneg */ +#define BCM54140_RDB_C_APWR_APD_MODE_MASK GENMASK(6, 5) +#define BCM54140_RDB_C_APWR_SLP_TIM_MASK BIT(4)/* sleep timer */ +#define BCM54140_RDB_C_APWR_SLP_TIM_2_7 0 /* 2.7s */ +#define BCM54140_RDB_C_APWR_SLP_TIM_5_4 1 /* 5.4s */ +#define BCM54140_RDB_C_PWR 0x02a /* copper power control */ +#define BCM54140_RDB_C_PWR_ISOLATE BIT(5) /* super isolate mode */ +#define BCM54140_RDB_C_MISC_CTRL 0x02f /* misc copper control */ +#define BCM54140_RDB_C_MISC_CTRL_WS_EN BIT(4) /* wirespeed enable */ + +/* RDB global registers + */ +#define BCM54140_RDB_TOP_IMR 0x82d /* interrupt mask */ +#define BCM54140_RDB_TOP_IMR_PORT0 BIT(4) +#define BCM54140_RDB_TOP_IMR_PORT1 BIT(5) +#define BCM54140_RDB_TOP_IMR_PORT2 BIT(6) +#define BCM54140_RDB_TOP_IMR_PORT3 BIT(7) + +#define BCM54140_DEFAULT_DOWNSHIFT 5 +#define BCM54140_MAX_DOWNSHIFT 9 + +struct bcm54140_priv { + int port; + int base_addr; +}; + +static int bcm54140_base_read_rdb(struct phy_device *phydev, u16 rdb) +{ + struct bcm54140_priv *priv = phydev->priv; + struct mii_bus *bus = phydev->mdio.bus; + int ret; + + mutex_lock(&bus->mdio_lock); + ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_ADDR, rdb); + if (ret < 0) + goto out; + + ret = __mdiobus_read(bus, priv->base_addr, MII_BCM54XX_RDB_DATA); + +out: + mutex_unlock(&bus->mdio_lock); + return ret; +} + +static int bcm54140_base_write_rdb(struct phy_device *phydev, + u16 rdb, u16 val) +{ + struct bcm54140_priv *priv = phydev->priv; + struct mii_bus *bus = phydev->mdio.bus; + int ret; + + mutex_lock(&bus->mdio_lock); + ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_ADDR, rdb); + if (ret < 0) + goto out; + + ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_DATA, val); + +out: + mutex_unlock(&bus->mdio_lock); + return ret; +} + +/* Under some circumstances a core PLL may not lock, this will then prevent + * a successful link establishment. Restart the PLL after the voltages are + * stable to workaround this issue. + */ +static int bcm54140_b0_workaround(struct phy_device *phydev) +{ + int spare3; + int ret; + + spare3 = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE3); + if (spare3 < 0) + return spare3; + + spare3 &= ~BCM54140_RDB_SPARE3_BIT0; + + ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3); + if (ret) + return ret; + + ret = phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN); + if (ret) + return ret; + + ret = phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0); + if (ret) + return ret; + + spare3 |= BCM54140_RDB_SPARE3_BIT0; + + return bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3); +} + +/* The BCM54140 is a quad PHY where only the first port has access to the + * global register. Thus we need to find out its PHY address. + * + */ +static int bcm54140_get_base_addr_and_port(struct phy_device *phydev) +{ + struct bcm54140_priv *priv = phydev->priv; + struct mii_bus *bus = phydev->mdio.bus; + int addr, min_addr, max_addr; + int step = 1; + u32 phy_id; + int tmp; + + min_addr = phydev->mdio.addr; + max_addr = phydev->mdio.addr; + addr = phydev->mdio.addr; + + /* We scan forward and backwards and look for PHYs which have the + * same phy_id like we do. Step 1 will scan forward, step 2 + * backwards. Once we are finished, we have a min_addr and + * max_addr which resembles the range of PHY addresses of the same + * type of PHY. There is one caveat; there may be many PHYs of + * the same type, but we know that each PHY takes exactly 4 + * consecutive addresses. Therefore we can deduce our offset + * to the base address of this quad PHY. + */ + + while (1) { + if (step == 3) { + break; + } else if (step == 1) { + max_addr = addr; + addr++; + } else { + min_addr = addr; + addr--; + } + + if (addr < 0 || addr >= PHY_MAX_ADDR) { + addr = phydev->mdio.addr; + step++; + continue; + } + + /* read the PHY id */ + tmp = mdiobus_read(bus, addr, MII_PHYSID1); + if (tmp < 0) + return tmp; + phy_id = tmp << 16; + tmp = mdiobus_read(bus, addr, MII_PHYSID2); + if (tmp < 0) + return tmp; + phy_id |= tmp; + + /* see if it is still the same PHY */ + if ((phy_id & phydev->drv->phy_id_mask) != + (phydev->drv->phy_id & phydev->drv->phy_id_mask)) { + addr = phydev->mdio.addr; + step++; + } + } + + /* The range we get should be a multiple of four. Please note that both + * the min_addr and max_addr are inclusive. So we have to add one if we + * subtract them. + */ + if ((max_addr - min_addr + 1) % 4) { + dev_err(&phydev->mdio.dev, + "Detected Quad PHY IDs %d..%d doesn't make sense.\n", + min_addr, max_addr); + return -EINVAL; + } + + priv->port = (phydev->mdio.addr - min_addr) % 4; + priv->base_addr = phydev->mdio.addr - priv->port; + + return 0; +} + +static int bcm54140_probe(struct phy_device *phydev) +{ + struct bcm54140_priv *priv; + int ret; + + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + ret = bcm54140_get_base_addr_and_port(phydev); + if (ret) + return ret; + + phydev_dbg(phydev, "probed (port %d, base PHY address %d)\n", + priv->port, priv->base_addr); + + return 0; +} + +static int bcm54140_config_init(struct phy_device *phydev) +{ + u16 reg = 0xffff; + int ret; + + /* Apply hardware errata */ + ret = bcm54140_b0_workaround(phydev); + if (ret) + return ret; + + /* Unmask events we are interested in. */ + reg &= ~(BCM54140_RDB_INT_DUPLEX | + BCM54140_RDB_INT_SPEED | + BCM54140_RDB_INT_LINK); + ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_IMR, reg); + if (ret) + return ret; + + /* LED1=LINKSPD[1], LED2=LINKSPD[2], LED3=LINK/ACTIVITY */ + ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE1, + 0, BCM54140_RDB_SPARE1_LSLM); + if (ret) + return ret; + + ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_LED_CTRL, + 0, BCM54140_RDB_LED_CTRL_ACTLINK0); + if (ret) + return ret; + + /* disable super isolate mode */ + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_PWR, + BCM54140_RDB_C_PWR_ISOLATE, 0); +} + +int bcm54140_did_interrupt(struct phy_device *phydev) +{ + int ret; + + ret = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR); + + return (ret < 0) ? 0 : ret; +} + +int bcm54140_ack_intr(struct phy_device *phydev) +{ + int reg; + + /* clear pending interrupts */ + reg = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR); + if (reg < 0) + return reg; + + return 0; +} + +int bcm54140_config_intr(struct phy_device *phydev) +{ + struct bcm54140_priv *priv = phydev->priv; + static const u16 port_to_imr_bit[] = { + BCM54140_RDB_TOP_IMR_PORT0, BCM54140_RDB_TOP_IMR_PORT1, + BCM54140_RDB_TOP_IMR_PORT2, BCM54140_RDB_TOP_IMR_PORT3, + }; + int reg; + + if (priv->port >= ARRAY_SIZE(port_to_imr_bit)) + return -EINVAL; + + reg = bcm54140_base_read_rdb(phydev, BCM54140_RDB_TOP_IMR); + if (reg < 0) + return reg; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + reg &= ~port_to_imr_bit[priv->port]; + else + reg |= port_to_imr_bit[priv->port]; + + return bcm54140_base_write_rdb(phydev, BCM54140_RDB_TOP_IMR, reg); +} + +static int bcm54140_get_downshift(struct phy_device *phydev, u8 *data) +{ + int val; + + val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_MISC_CTRL); + if (val < 0) + return val; + + if (!(val & BCM54140_RDB_C_MISC_CTRL_WS_EN)) { + *data = DOWNSHIFT_DEV_DISABLE; + return 0; + } + + val = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE2); + if (val < 0) + return val; + + if (val & BCM54140_RDB_SPARE2_WS_RTRY_DIS) + *data = 1; + else + *data = FIELD_GET(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, val) + 2; + + return 0; +} + +static int bcm54140_set_downshift(struct phy_device *phydev, u8 cnt) +{ + u16 mask, set; + int ret; + + if (cnt > BCM54140_MAX_DOWNSHIFT && cnt != DOWNSHIFT_DEV_DEFAULT_COUNT) + return -EINVAL; + + if (!cnt) + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL, + BCM54140_RDB_C_MISC_CTRL_WS_EN, 0); + + if (cnt == DOWNSHIFT_DEV_DEFAULT_COUNT) + cnt = BCM54140_DEFAULT_DOWNSHIFT; + + if (cnt == 1) { + mask = 0; + set = BCM54140_RDB_SPARE2_WS_RTRY_DIS; + } else { + mask = BCM54140_RDB_SPARE2_WS_RTRY_DIS; + mask |= BCM54140_RDB_SPARE2_WS_RTRY_LIMIT; + set = FIELD_PREP(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, cnt - 2); + } + ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE2, + mask, set); + if (ret) + return ret; + + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL, + 0, BCM54140_RDB_C_MISC_CTRL_WS_EN); +} + +static int bcm54140_get_edpd(struct phy_device *phydev, u16 *tx_interval) +{ + int val; + + val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_APWR); + if (val < 0) + return val; + + switch (FIELD_GET(BCM54140_RDB_C_APWR_APD_MODE_MASK, val)) { + case BCM54140_RDB_C_APWR_APD_MODE_DIS: + case BCM54140_RDB_C_APWR_APD_MODE_DIS2: + *tx_interval = ETHTOOL_PHY_EDPD_DISABLE; + break; + case BCM54140_RDB_C_APWR_APD_MODE_EN: + case BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG: + switch (FIELD_GET(BCM54140_RDB_C_APWR_SLP_TIM_MASK, val)) { + case BCM54140_RDB_C_APWR_SLP_TIM_2_7: + *tx_interval = 2700; + break; + case BCM54140_RDB_C_APWR_SLP_TIM_5_4: + *tx_interval = 5400; + break; + } + } + + return 0; +} + +static int bcm54140_set_edpd(struct phy_device *phydev, u16 tx_interval) +{ + u16 mask, set; + + mask = BCM54140_RDB_C_APWR_APD_MODE_MASK; + if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE) + set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK, + BCM54140_RDB_C_APWR_APD_MODE_DIS); + else + set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK, + BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG); + + /* enable single pulse mode */ + set |= BCM54140_RDB_C_APWR_SINGLE_PULSE; + + /* set sleep timer */ + mask |= BCM54140_RDB_C_APWR_SLP_TIM_MASK; + switch (tx_interval) { + case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS: + case ETHTOOL_PHY_EDPD_DISABLE: + case 2700: + set |= BCM54140_RDB_C_APWR_SLP_TIM_2_7; + break; + case 5400: + set |= BCM54140_RDB_C_APWR_SLP_TIM_5_4; + break; + default: + return -EINVAL; + } + + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_APWR, mask, set); +} + +static int bcm54140_get_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return bcm54140_get_downshift(phydev, data); + case ETHTOOL_PHY_EDPD: + return bcm54140_get_edpd(phydev, data); + default: + return -EOPNOTSUPP; + } +} + +static int bcm54140_set_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, const void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return bcm54140_set_downshift(phydev, *(const u8 *)data); + case ETHTOOL_PHY_EDPD: + return bcm54140_set_edpd(phydev, *(const u16 *)data); + default: + return -EOPNOTSUPP; + } +} + +static struct phy_driver bcm54140_drivers[] = { + { + .phy_id = PHY_ID_BCM54140, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM54140", + .features = PHY_GBIT_FEATURES, + .config_init = bcm54140_config_init, + .did_interrupt = bcm54140_did_interrupt, + .ack_interrupt = bcm54140_ack_intr, + .config_intr = bcm54140_config_intr, + .probe = bcm54140_probe, + .suspend = genphy_suspend, + .resume = genphy_resume, + .get_tunable = bcm54140_get_tunable, + .set_tunable = bcm54140_set_tunable, + }, +}; +module_phy_driver(bcm54140_drivers); + +static struct mdio_device_id __maybe_unused bcm54140_tbl[] = { + { PHY_ID_BCM54140, 0xfffffff0 }, + { } +}; + +MODULE_AUTHOR("Michael Walle"); +MODULE_DESCRIPTION("Broadcom BCM54140 PHY driver"); +MODULE_DEVICE_TABLE(mdio, bcm54140_tbl); +MODULE_LICENSE("GPL"); |