diff options
author | Voon Weifeng <weifeng.voon@intel.com> | 2020-03-31 01:05:10 +0800 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-03-30 20:10:34 -0700 |
commit | 58da0cfa6cf1200b81b65aef36dfa6130b577ef6 (patch) | |
tree | 120445f348658121b5c33b14a2b36d0b24453218 /drivers | |
parent | 60d79ab33c4cc3c7b563cadea9e5bcf43e6e3951 (diff) |
net: stmmac: create dwmac-intel.c to contain all Intel platform
As stmmac_pci.c file is getting bigger and more complex, it is reasonable
to separate all the Intel specific dwmac pci device to a different file.
This move includes Intel Quark, TGL and EHL. A new kernel config
CONFIG_DWMAC_INTEL is introduced and depends on X86. For this initial
patch, all the necessary function such as probe() and exit() are identical
besides the function name.
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Kconfig | 9 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 509 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 313 |
4 files changed, 519 insertions, 313 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 9ad927f646e8..b46f8d2ae6d7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -198,6 +198,15 @@ config DWMAC_SUN8I EMAC ethernet controller. endif +config DWMAC_INTEL + tristate "Intel GMAC support" + default X86 + depends on X86 && STMMAC_ETH && PCI + depends on COMMON_CLK + ---help--- + This selects the Intel platform specific bus support for the + stmmac driver. This driver is used for Intel Quark/EHL/TGL. + config STMMAC_PCI tristate "STMMAC PCI bus support" depends on STMMAC_ETH && PCI diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile index c59926d96bcc..5a6f265bc540 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Makefile +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile @@ -30,5 +30,6 @@ obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o stmmac-platform-objs:= stmmac_platform.o dwmac-altr-socfpga-objs := altr_tse_pcs.o dwmac-socfpga.o +obj-$(CONFIG_DWMAC_INTEL) += dwmac-intel.o obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o stmmac-pci-objs:= stmmac_pci.o diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c new file mode 100644 index 000000000000..6c19aa361444 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c @@ -0,0 +1,509 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2020, Intel Corporation + */ + +#include <linux/clk-provider.h> +#include <linux/pci.h> +#include <linux/dmi.h> +#include "stmmac.h" + +/* This struct is used to associate PCI Function of MAC controller on a board, + * discovered via DMI, with the address of PHY connected to the MAC. The + * negative value of the address means that MAC controller is not connected + * with PHY. + */ +struct stmmac_pci_func_data { + unsigned int func; + int phy_addr; +}; + +struct stmmac_pci_dmi_data { + const struct stmmac_pci_func_data *func; + size_t nfuncs; +}; + +struct stmmac_pci_info { + int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat); +}; + +static int stmmac_pci_find_phy_addr(struct pci_dev *pdev, + const struct dmi_system_id *dmi_list) +{ + const struct stmmac_pci_func_data *func_data; + const struct stmmac_pci_dmi_data *dmi_data; + const struct dmi_system_id *dmi_id; + int func = PCI_FUNC(pdev->devfn); + size_t n; + + dmi_id = dmi_first_match(dmi_list); + if (!dmi_id) + return -ENODEV; + + dmi_data = dmi_id->driver_data; + func_data = dmi_data->func; + + for (n = 0; n < dmi_data->nfuncs; n++, func_data++) + if (func_data->func == func) + return func_data->phy_addr; + + return -ENODEV; +} + +static void common_default_data(struct plat_stmmacenet_data *plat) +{ + plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */ + plat->has_gmac = 1; + plat->force_sf_dma_mode = 1; + + plat->mdio_bus_data->needs_reset = true; + + /* Set default value for multicast hash bins */ + plat->multicast_filter_bins = HASH_TABLE_SIZE; + + /* Set default value for unicast filter entries */ + plat->unicast_filter_entries = 1; + + /* Set the maxmtu to a default of JUMBO_LEN */ + plat->maxmtu = JUMBO_LEN; + + /* Set default number of RX and TX queues to use */ + plat->tx_queues_to_use = 1; + plat->rx_queues_to_use = 1; + + /* Disable Priority config by default */ + plat->tx_queues_cfg[0].use_prio = false; + plat->rx_queues_cfg[0].use_prio = false; + + /* Disable RX queues routing by default */ + plat->rx_queues_cfg[0].pkt_route = 0x0; +} + +static int intel_mgbe_common_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + int i; + + plat->clk_csr = 5; + plat->has_gmac = 0; + plat->has_gmac4 = 1; + plat->force_sf_dma_mode = 0; + plat->tso_en = 1; + + plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; + + for (i = 0; i < plat->rx_queues_to_use; i++) { + plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB; + plat->rx_queues_cfg[i].chan = i; + + /* Disable Priority config by default */ + plat->rx_queues_cfg[i].use_prio = false; + + /* Disable RX queues routing by default */ + plat->rx_queues_cfg[i].pkt_route = 0x0; + } + + for (i = 0; i < plat->tx_queues_to_use; i++) { + plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB; + + /* Disable Priority config by default */ + plat->tx_queues_cfg[i].use_prio = false; + } + + /* FIFO size is 4096 bytes for 1 tx/rx queue */ + plat->tx_fifo_size = plat->tx_queues_to_use * 4096; + plat->rx_fifo_size = plat->rx_queues_to_use * 4096; + + plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR; + plat->tx_queues_cfg[0].weight = 0x09; + plat->tx_queues_cfg[1].weight = 0x0A; + plat->tx_queues_cfg[2].weight = 0x0B; + plat->tx_queues_cfg[3].weight = 0x0C; + plat->tx_queues_cfg[4].weight = 0x0D; + plat->tx_queues_cfg[5].weight = 0x0E; + plat->tx_queues_cfg[6].weight = 0x0F; + plat->tx_queues_cfg[7].weight = 0x10; + + plat->dma_cfg->pbl = 32; + plat->dma_cfg->pblx8 = true; + plat->dma_cfg->fixed_burst = 0; + plat->dma_cfg->mixed_burst = 0; + plat->dma_cfg->aal = 0; + + plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi), + GFP_KERNEL); + if (!plat->axi) + return -ENOMEM; + + plat->axi->axi_lpi_en = 0; + plat->axi->axi_xit_frm = 0; + plat->axi->axi_wr_osr_lmt = 1; + plat->axi->axi_rd_osr_lmt = 1; + plat->axi->axi_blen[0] = 4; + plat->axi->axi_blen[1] = 8; + plat->axi->axi_blen[2] = 16; + + plat->ptp_max_adj = plat->clk_ptp_rate; + + /* Set system clock */ + plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev, + "stmmac-clk", NULL, 0, + plat->clk_ptp_rate); + + if (IS_ERR(plat->stmmac_clk)) { + dev_warn(&pdev->dev, "Fail to register stmmac-clk\n"); + plat->stmmac_clk = NULL; + } + clk_prepare_enable(plat->stmmac_clk); + + /* Set default value for multicast hash bins */ + plat->multicast_filter_bins = HASH_TABLE_SIZE; + + /* Set default value for unicast filter entries */ + plat->unicast_filter_entries = 1; + + /* Set the maxmtu to a default of JUMBO_LEN */ + plat->maxmtu = JUMBO_LEN; + + return 0; +} + +static int ehl_common_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + int ret; + + plat->rx_queues_to_use = 8; + plat->tx_queues_to_use = 8; + plat->clk_ptp_rate = 200000000; + ret = intel_mgbe_common_data(pdev, plat); + if (ret) + return ret; + + return 0; +} + +static int ehl_sgmii_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->bus_id = 1; + plat->phy_addr = 0; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; + + return ehl_common_data(pdev, plat); +} + +static struct stmmac_pci_info ehl_sgmii1g_pci_info = { + .setup = ehl_sgmii_data, +}; + +static int ehl_rgmii_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->bus_id = 1; + plat->phy_addr = 0; + plat->phy_interface = PHY_INTERFACE_MODE_RGMII; + + return ehl_common_data(pdev, plat); +} + +static struct stmmac_pci_info ehl_rgmii1g_pci_info = { + .setup = ehl_rgmii_data, +}; + +static int tgl_common_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + int ret; + + plat->rx_queues_to_use = 6; + plat->tx_queues_to_use = 4; + plat->clk_ptp_rate = 200000000; + ret = intel_mgbe_common_data(pdev, plat); + if (ret) + return ret; + + return 0; +} + +static int tgl_sgmii_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->bus_id = 1; + plat->phy_addr = 0; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; + return tgl_common_data(pdev, plat); +} + +static struct stmmac_pci_info tgl_sgmii1g_pci_info = { + .setup = tgl_sgmii_data, +}; + +static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = { + { + .func = 6, + .phy_addr = 1, + }, +}; + +static const struct stmmac_pci_dmi_data galileo_stmmac_dmi_data = { + .func = galileo_stmmac_func_data, + .nfuncs = ARRAY_SIZE(galileo_stmmac_func_data), +}; + +static const struct stmmac_pci_func_data iot2040_stmmac_func_data[] = { + { + .func = 6, + .phy_addr = 1, + }, + { + .func = 7, + .phy_addr = 1, + }, +}; + +static const struct stmmac_pci_dmi_data iot2040_stmmac_dmi_data = { + .func = iot2040_stmmac_func_data, + .nfuncs = ARRAY_SIZE(iot2040_stmmac_func_data), +}; + +static const struct dmi_system_id quark_pci_dmi[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"), + }, + .driver_data = (void *)&galileo_stmmac_dmi_data, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"), + }, + .driver_data = (void *)&galileo_stmmac_dmi_data, + }, + /* There are 2 types of SIMATIC IOT2000: IOT2020 and IOT2040. + * The asset tag "6ES7647-0AA00-0YA2" is only for IOT2020 which + * has only one pci network device while other asset tags are + * for IOT2040 which has two. + */ + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), + DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG, + "6ES7647-0AA00-0YA2"), + }, + .driver_data = (void *)&galileo_stmmac_dmi_data, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), + }, + .driver_data = (void *)&iot2040_stmmac_dmi_data, + }, + {} +}; + +static int quark_default_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + int ret; + + /* Set common default data first */ + common_default_data(plat); + + /* Refuse to load the driver and register net device if MAC controller + * does not connect to any PHY interface. + */ + ret = stmmac_pci_find_phy_addr(pdev, quark_pci_dmi); + if (ret < 0) { + /* Return error to the caller on DMI enabled boards. */ + if (dmi_get_system_info(DMI_BOARD_NAME)) + return ret; + + /* Galileo boards with old firmware don't support DMI. We always + * use 1 here as PHY address, so at least the first found MAC + * controller would be probed. + */ + ret = 1; + } + + plat->bus_id = pci_dev_id(pdev); + plat->phy_addr = ret; + plat->phy_interface = PHY_INTERFACE_MODE_RMII; + + plat->dma_cfg->pbl = 16; + plat->dma_cfg->pblx8 = true; + plat->dma_cfg->fixed_burst = 1; + /* AXI (TODO) */ + + return 0; +} + +static const struct stmmac_pci_info quark_pci_info = { + .setup = quark_default_data, +}; + +/** + * intel_eth_pci_probe + * + * @pdev: pci device pointer + * @id: pointer to table of device id/id's. + * + * Description: This probing function gets called for all PCI devices which + * match the ID table and are not "owned" by other driver yet. This function + * gets passed a "struct pci_dev *" for each device whose entry in the ID table + * matches the device. The probe functions returns zero when the driver choose + * to take "ownership" of the device or an error code(-ve no) otherwise. + */ +static int intel_eth_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data; + struct plat_stmmacenet_data *plat; + struct stmmac_resources res; + int i; + int ret; + + plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); + if (!plat) + return -ENOMEM; + + plat->mdio_bus_data = devm_kzalloc(&pdev->dev, + sizeof(*plat->mdio_bus_data), + GFP_KERNEL); + if (!plat->mdio_bus_data) + return -ENOMEM; + + plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), + GFP_KERNEL); + if (!plat->dma_cfg) + return -ENOMEM; + + /* Enable pci device */ + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", + __func__); + return ret; + } + + /* Get the base address of device */ + for (i = 0; i < PCI_STD_NUM_BARS; i++) { + if (pci_resource_len(pdev, i) == 0) + continue; + ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev)); + if (ret) + return ret; + break; + } + + pci_set_master(pdev); + + ret = info->setup(pdev, plat); + if (ret) + return ret; + + pci_enable_msi(pdev); + + memset(&res, 0, sizeof(res)); + res.addr = pcim_iomap_table(pdev)[i]; + res.wol_irq = pdev->irq; + res.irq = pdev->irq; + + return stmmac_dvr_probe(&pdev->dev, plat, &res); +} + +/** + * intel_eth_pci_remove + * + * @pdev: platform device pointer + * Description: this function calls the main to free the net resources + * and releases the PCI resources. + */ +static void intel_eth_pci_remove(struct pci_dev *pdev) +{ + struct net_device *ndev = dev_get_drvdata(&pdev->dev); + struct stmmac_priv *priv = netdev_priv(ndev); + int i; + + stmmac_dvr_remove(&pdev->dev); + + if (priv->plat->stmmac_clk) + clk_unregister_fixed_rate(priv->plat->stmmac_clk); + + for (i = 0; i < PCI_STD_NUM_BARS; i++) { + if (pci_resource_len(pdev, i) == 0) + continue; + pcim_iounmap_regions(pdev, BIT(i)); + break; + } + + pci_disable_device(pdev); +} + +static int __maybe_unused intel_eth_pci_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int ret; + + ret = stmmac_suspend(dev); + if (ret) + return ret; + + ret = pci_save_state(pdev); + if (ret) + return ret; + + pci_disable_device(pdev); + pci_wake_from_d3(pdev, true); + return 0; +} + +static int __maybe_unused intel_eth_pci_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int ret; + + pci_restore_state(pdev); + pci_set_power_state(pdev, PCI_D0); + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + pci_set_master(pdev); + + return stmmac_resume(dev); +} + +static SIMPLE_DEV_PM_OPS(intel_eth_pm_ops, intel_eth_pci_suspend, + intel_eth_pci_resume); + +#define PCI_DEVICE_ID_INTEL_QUARK_ID 0x0937 +#define PCI_DEVICE_ID_INTEL_EHL_RGMII1G_ID 0x4b30 +#define PCI_DEVICE_ID_INTEL_EHL_SGMII1G_ID 0x4b31 +#define PCI_DEVICE_ID_INTEL_TGL_SGMII1G_ID 0xa0ac + +static const struct pci_device_id intel_eth_pci_id_table[] = { + { PCI_DEVICE_DATA(INTEL, QUARK_ID, &quark_pci_info) }, + { PCI_DEVICE_DATA(INTEL, EHL_RGMII1G_ID, &ehl_rgmii1g_pci_info) }, + { PCI_DEVICE_DATA(INTEL, EHL_SGMII1G_ID, &ehl_sgmii1g_pci_info) }, + { PCI_DEVICE_DATA(INTEL, TGL_SGMII1G_ID, &tgl_sgmii1g_pci_info) }, + {} +}; + +MODULE_DEVICE_TABLE(pci, intel_eth_pci_id_table); + +static struct pci_driver intel_eth_pci_driver = { + .name = "intel-eth-pci", + .id_table = intel_eth_pci_id_table, + .probe = intel_eth_pci_probe, + .remove = intel_eth_pci_remove, + .driver = { + .pm = &intel_eth_pm_ops, + }, +}; + +module_pci_driver(intel_eth_pci_driver); + +MODULE_DESCRIPTION("INTEL 10/100/1000 Ethernet PCI driver"); +MODULE_AUTHOR("Voon Weifeng <weifeng.voon@intel.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index 7acbac73c29c..3fb21f7ac9fb 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -15,49 +15,10 @@ #include "stmmac.h" -/* - * This struct is used to associate PCI Function of MAC controller on a board, - * discovered via DMI, with the address of PHY connected to the MAC. The - * negative value of the address means that MAC controller is not connected - * with PHY. - */ -struct stmmac_pci_func_data { - unsigned int func; - int phy_addr; -}; - -struct stmmac_pci_dmi_data { - const struct stmmac_pci_func_data *func; - size_t nfuncs; -}; - struct stmmac_pci_info { int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat); }; -static int stmmac_pci_find_phy_addr(struct pci_dev *pdev, - const struct dmi_system_id *dmi_list) -{ - const struct stmmac_pci_func_data *func_data; - const struct stmmac_pci_dmi_data *dmi_data; - const struct dmi_system_id *dmi_id; - int func = PCI_FUNC(pdev->devfn); - size_t n; - - dmi_id = dmi_first_match(dmi_list); - if (!dmi_id) - return -ENODEV; - - dmi_data = dmi_id->driver_data; - func_data = dmi_data->func; - - for (n = 0; n < dmi_data->nfuncs; n++, func_data++) - if (func_data->func == func) - return func_data->phy_addr; - - return -ENODEV; -} - static void common_default_data(struct plat_stmmacenet_data *plat) { plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */ @@ -108,272 +69,6 @@ static const struct stmmac_pci_info stmmac_pci_info = { .setup = stmmac_default_data, }; -static int intel_mgbe_common_data(struct pci_dev *pdev, - struct plat_stmmacenet_data *plat) -{ - int i; - - plat->clk_csr = 5; - plat->has_gmac = 0; - plat->has_gmac4 = 1; - plat->force_sf_dma_mode = 0; - plat->tso_en = 1; - - plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; - - for (i = 0; i < plat->rx_queues_to_use; i++) { - plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB; - plat->rx_queues_cfg[i].chan = i; - - /* Disable Priority config by default */ - plat->rx_queues_cfg[i].use_prio = false; - - /* Disable RX queues routing by default */ - plat->rx_queues_cfg[i].pkt_route = 0x0; - } - - for (i = 0; i < plat->tx_queues_to_use; i++) { - plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB; - - /* Disable Priority config by default */ - plat->tx_queues_cfg[i].use_prio = false; - } - - /* FIFO size is 4096 bytes for 1 tx/rx queue */ - plat->tx_fifo_size = plat->tx_queues_to_use * 4096; - plat->rx_fifo_size = plat->rx_queues_to_use * 4096; - - plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR; - plat->tx_queues_cfg[0].weight = 0x09; - plat->tx_queues_cfg[1].weight = 0x0A; - plat->tx_queues_cfg[2].weight = 0x0B; - plat->tx_queues_cfg[3].weight = 0x0C; - plat->tx_queues_cfg[4].weight = 0x0D; - plat->tx_queues_cfg[5].weight = 0x0E; - plat->tx_queues_cfg[6].weight = 0x0F; - plat->tx_queues_cfg[7].weight = 0x10; - - plat->dma_cfg->pbl = 32; - plat->dma_cfg->pblx8 = true; - plat->dma_cfg->fixed_burst = 0; - plat->dma_cfg->mixed_burst = 0; - plat->dma_cfg->aal = 0; - - plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi), - GFP_KERNEL); - if (!plat->axi) - return -ENOMEM; - - plat->axi->axi_lpi_en = 0; - plat->axi->axi_xit_frm = 0; - plat->axi->axi_wr_osr_lmt = 1; - plat->axi->axi_rd_osr_lmt = 1; - plat->axi->axi_blen[0] = 4; - plat->axi->axi_blen[1] = 8; - plat->axi->axi_blen[2] = 16; - - plat->ptp_max_adj = plat->clk_ptp_rate; - - /* Set system clock */ - plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev, - "stmmac-clk", NULL, 0, - plat->clk_ptp_rate); - - if (IS_ERR(plat->stmmac_clk)) { - dev_warn(&pdev->dev, "Fail to register stmmac-clk\n"); - plat->stmmac_clk = NULL; - } - clk_prepare_enable(plat->stmmac_clk); - - /* Set default value for multicast hash bins */ - plat->multicast_filter_bins = HASH_TABLE_SIZE; - - /* Set default value for unicast filter entries */ - plat->unicast_filter_entries = 1; - - /* Set the maxmtu to a default of JUMBO_LEN */ - plat->maxmtu = JUMBO_LEN; - - return 0; -} - -static int ehl_common_data(struct pci_dev *pdev, - struct plat_stmmacenet_data *plat) -{ - int ret; - - plat->rx_queues_to_use = 8; - plat->tx_queues_to_use = 8; - plat->clk_ptp_rate = 200000000; - ret = intel_mgbe_common_data(pdev, plat); - if (ret) - return ret; - - return 0; -} - -static int ehl_sgmii_data(struct pci_dev *pdev, - struct plat_stmmacenet_data *plat) -{ - plat->bus_id = 1; - plat->phy_addr = 0; - plat->phy_interface = PHY_INTERFACE_MODE_SGMII; - - return ehl_common_data(pdev, plat); -} - -static struct stmmac_pci_info ehl_sgmii1g_pci_info = { - .setup = ehl_sgmii_data, -}; - -static int ehl_rgmii_data(struct pci_dev *pdev, - struct plat_stmmacenet_data *plat) -{ - plat->bus_id = 1; - plat->phy_addr = 0; - plat->phy_interface = PHY_INTERFACE_MODE_RGMII; - - return ehl_common_data(pdev, plat); -} - -static struct stmmac_pci_info ehl_rgmii1g_pci_info = { - .setup = ehl_rgmii_data, -}; - -static int tgl_common_data(struct pci_dev *pdev, - struct plat_stmmacenet_data *plat) -{ - int ret; - - plat->rx_queues_to_use = 6; - plat->tx_queues_to_use = 4; - plat->clk_ptp_rate = 200000000; - ret = intel_mgbe_common_data(pdev, plat); - if (ret) - return ret; - - return 0; -} - -static int tgl_sgmii_data(struct pci_dev *pdev, - struct plat_stmmacenet_data *plat) -{ - plat->bus_id = 1; - plat->phy_addr = 0; - plat->phy_interface = PHY_INTERFACE_MODE_SGMII; - return tgl_common_data(pdev, plat); -} - -static struct stmmac_pci_info tgl_sgmii1g_pci_info = { - .setup = tgl_sgmii_data, -}; - -static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = { - { - .func = 6, - .phy_addr = 1, - }, -}; - -static const struct stmmac_pci_dmi_data galileo_stmmac_dmi_data = { - .func = galileo_stmmac_func_data, - .nfuncs = ARRAY_SIZE(galileo_stmmac_func_data), -}; - -static const struct stmmac_pci_func_data iot2040_stmmac_func_data[] = { - { - .func = 6, - .phy_addr = 1, - }, - { - .func = 7, - .phy_addr = 1, - }, -}; - -static const struct stmmac_pci_dmi_data iot2040_stmmac_dmi_data = { - .func = iot2040_stmmac_func_data, - .nfuncs = ARRAY_SIZE(iot2040_stmmac_func_data), -}; - -static const struct dmi_system_id quark_pci_dmi[] = { - { - .matches = { - DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"), - }, - .driver_data = (void *)&galileo_stmmac_dmi_data, - }, - { - .matches = { - DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"), - }, - .driver_data = (void *)&galileo_stmmac_dmi_data, - }, - /* - * There are 2 types of SIMATIC IOT2000: IOT2020 and IOT2040. - * The asset tag "6ES7647-0AA00-0YA2" is only for IOT2020 which - * has only one pci network device while other asset tags are - * for IOT2040 which has two. - */ - { - .matches = { - DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), - DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG, - "6ES7647-0AA00-0YA2"), - }, - .driver_data = (void *)&galileo_stmmac_dmi_data, - }, - { - .matches = { - DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), - }, - .driver_data = (void *)&iot2040_stmmac_dmi_data, - }, - {} -}; - -static int quark_default_data(struct pci_dev *pdev, - struct plat_stmmacenet_data *plat) -{ - int ret; - - /* Set common default data first */ - common_default_data(plat); - - /* - * Refuse to load the driver and register net device if MAC controller - * does not connect to any PHY interface. - */ - ret = stmmac_pci_find_phy_addr(pdev, quark_pci_dmi); - if (ret < 0) { - /* Return error to the caller on DMI enabled boards. */ - if (dmi_get_system_info(DMI_BOARD_NAME)) - return ret; - - /* - * Galileo boards with old firmware don't support DMI. We always - * use 1 here as PHY address, so at least the first found MAC - * controller would be probed. - */ - ret = 1; - } - - plat->bus_id = pci_dev_id(pdev); - plat->phy_addr = ret; - plat->phy_interface = PHY_INTERFACE_MODE_RMII; - - plat->dma_cfg->pbl = 16; - plat->dma_cfg->pblx8 = true; - plat->dma_cfg->fixed_burst = 1; - /* AXI (TODO) */ - - return 0; -} - -static const struct stmmac_pci_info quark_pci_info = { - .setup = quark_default_data, -}; - static int snps_gmac5_default_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { @@ -582,19 +277,11 @@ static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_pci_suspend, stmmac_pci_resume); #define PCI_VENDOR_ID_STMMAC 0x0700 #define PCI_DEVICE_ID_STMMAC_STMMAC 0x1108 -#define PCI_DEVICE_ID_INTEL_QUARK_ID 0x0937 -#define PCI_DEVICE_ID_INTEL_EHL_RGMII1G_ID 0x4b30 -#define PCI_DEVICE_ID_INTEL_EHL_SGMII1G_ID 0x4b31 -#define PCI_DEVICE_ID_INTEL_TGL_SGMII1G_ID 0xa0ac #define PCI_DEVICE_ID_SYNOPSYS_GMAC5_ID 0x7102 static const struct pci_device_id stmmac_id_table[] = { { PCI_DEVICE_DATA(STMMAC, STMMAC, &stmmac_pci_info) }, { PCI_DEVICE_DATA(STMICRO, MAC, &stmmac_pci_info) }, - { PCI_DEVICE_DATA(INTEL, QUARK_ID, &quark_pci_info) }, - { PCI_DEVICE_DATA(INTEL, EHL_RGMII1G_ID, &ehl_rgmii1g_pci_info) }, - { PCI_DEVICE_DATA(INTEL, EHL_SGMII1G_ID, &ehl_sgmii1g_pci_info) }, - { PCI_DEVICE_DATA(INTEL, TGL_SGMII1G_ID, &tgl_sgmii1g_pci_info) }, { PCI_DEVICE_DATA(SYNOPSYS, GMAC5_ID, &snps_gmac5_pci_info) }, {} }; |