Merge tag 'mfd-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to the core:
   - Honour PLATFORM_DEVID_NONE and PLATFORM_DEVID_AUTO dev IDs

  Changes to existing drivers:
   - IRQ additions/fixes; axp20x, da9063-core
   - Code simplification; i2c-dln2
   - Regmap additions/fixes; max77693
   - Error checking/handling improvements; dln2, db8500-prcmu
   - Bug fixes; dln2, wm8350-core
   - DT support/documentation; max77693, max77686, tps65217, twl4030-power,
                               gpio-tc3589x
   - Decouple syscon interface from platform devices
   - Use MFD hotplug registration; rtsx_usb, viperboard, hid-sensor-hub
   - Regulator fixups; sec-core
   - Power Management additions/fixes; rts5227, tc6393xb
   - Remove relic/redundant code; ab8500-sysctrl, lpc_sch, max77693-private
   - Clean-up/coding style changes; tps65090
   - Clk additions/fixes; tc6393xb, tc6387xb, t7l66xb
   - Add USB-SPI support; dln2
   - Trivial changes; max14577, arizona-spi, lpc_sch, wm8997-tables, wm5102-tables
                      wm5110-tables, axp20x, atmel-hlcdc, rtsx_pci

  New drivers/supported devices:
   - axp288 PMIC support added to axp20x
   - s2mps13 support added to sec-core
   - New support for Diolan DLN-2
   - New support for atmel-hlcdc"

* tag 'mfd-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (55 commits)
  mfd: rtsx: Add func to split u32 into register
  mfd: atmel-hlcdc: Add Kconfig option description and name
  mfd: da9063: Get irq base dynamically before registering device
  mfd: max14577: Fix obvious typo in company name in copyright
  mfd: axp20x: Constify axp20x_acpi_match and rid unused warning
  mfd: t7l66xb: prepare/unprepare clocks
  mfd: tc6387xb: prepare/unprepare clocks
  mfd: dln2: add support for USB-SPI module
  mfd: wm5110: Add missing registers for AIF2 channels 3-6
  mfd: tc3589x: get rid of static base
  mfd: arizona: Document HP_CTRL_1L and HP_CTRL_1R registers
  mfd: wm8997: Mark INTERRUPT_STATUS_2_MASK as readable
  mfd: tc6393xb: Prepare/unprepare clocks
  mfd: tps65090: Fix bonkers indenting strategy
  mfd: tc6393xb: Fail ohci suspend if full state restore is required
  mfd: lpc_sch: Don't call mfd_remove_devices()
  mfd: wm8350-core: Fix probable mask then right shift defect
  mfd: ab8500-sysctrl: Drop ab8500_restart
  mfd: db8500-prcmu: Provide sane error path values
  mfd: db8500-prcmu: Check return of devm_ioremap for error
  ...

47 files changed, 2801 insertions, 253 deletions

diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
index b7797fb12e12..7bb13af8e214 100644
--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -23,6 +23,7 @@
 #include <linux/clk-provider.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps13.h>
 #include <linux/mfd/samsung/s2mps14.h>
 #include <linux/mfd/samsung/s5m8767.h>
 #include <linux/mfd/samsung/core.h>
@@ -120,6 +121,24 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
 	},
 };
 
+static struct clk_init_data s2mps13_clks_init[S2MPS11_CLKS_NUM] = {
+	[S2MPS11_CLK_AP] = {
+		.name = "s2mps13_ap",
+		.ops = &s2mps11_clk_ops,
+		.flags = CLK_IS_ROOT,
+	},
+	[S2MPS11_CLK_CP] = {
+		.name = "s2mps13_cp",
+		.ops = &s2mps11_clk_ops,
+		.flags = CLK_IS_ROOT,
+	},
+	[S2MPS11_CLK_BT] = {
+		.name = "s2mps13_bt",
+		.ops = &s2mps11_clk_ops,
+		.flags = CLK_IS_ROOT,
+	},
+};
+
 static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
 	[S2MPS11_CLK_AP] = {
 		.name = "s2mps14_ap",
@@ -184,6 +203,10 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 		s2mps11_reg = S2MPS11_REG_RTC_CTRL;
 		clks_init = s2mps11_clks_init;
 		break;
+	case S2MPS13X:
+		s2mps11_reg = S2MPS13_REG_RTCCTRL;
+		clks_init = s2mps13_clks_init;
+		break;
 	case S2MPS14X:
 		s2mps11_reg = S2MPS14_REG_RTCCTRL;
 		clks_init = s2mps14_clks_init;
@@ -279,6 +302,7 @@ static int s2mps11_clk_remove(struct platform_device *pdev)
 
 static const struct platform_device_id s2mps11_clk_id[] = {
 	{ "s2mps11-clk", S2MPS11X},
+	{ "s2mps13-clk", S2MPS13X},
 	{ "s2mps14-clk", S2MPS14X},
 	{ "s5m8767-clk", S5M8767X},
 	{ },
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 0959ca9b6b27..23dfd5f59b39 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -905,4 +905,16 @@ config GPIO_VIPERBOARD
           River Tech's viperboard.h for detailed meaning
           of the module parameters.
 
+config GPIO_DLN2
+	tristate "Diolan DLN2 GPIO support"
+	depends on MFD_DLN2
+	select GPIOLIB_IRQCHIP
+
+	help
+	  Select this option to enable GPIO driver for the Diolan DLN2
+	  board.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called gpio-dln2.
+
 endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index e5d346cf3b6e..e60677b8ccb4 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_GPIO_CRYSTAL_COVE)	+= gpio-crystalcove.o
 obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
 obj-$(CONFIG_GPIO_DA9055)	+= gpio-da9055.o
 obj-$(CONFIG_GPIO_DAVINCI)	+= gpio-davinci.o
+obj-$(CONFIG_GPIO_DLN2)		+= gpio-dln2.o
 obj-$(CONFIG_GPIO_DWAPB)	+= gpio-dwapb.o
 obj-$(CONFIG_GPIO_EM)		+= gpio-em.o
 obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
diff --git a/drivers/gpio/gpio-dln2.c b/drivers/gpio/gpio-dln2.c
new file mode 100644
index 000000000000..978b51eae2ec
--- /dev/null
+++ b/drivers/gpio/gpio-dln2.c
@@ -0,0 +1,553 @@
+/*
+ * Driver for the Diolan DLN-2 USB-GPIO adapter
+ *
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/dln2.h>
+
+#define DLN2_GPIO_ID			0x01
+
+#define DLN2_GPIO_GET_PIN_COUNT		DLN2_CMD(0x01, DLN2_GPIO_ID)
+#define DLN2_GPIO_SET_DEBOUNCE		DLN2_CMD(0x04, DLN2_GPIO_ID)
+#define DLN2_GPIO_GET_DEBOUNCE		DLN2_CMD(0x05, DLN2_GPIO_ID)
+#define DLN2_GPIO_PORT_GET_VAL		DLN2_CMD(0x06, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_VAL		DLN2_CMD(0x0B, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_OUT_VAL	DLN2_CMD(0x0C, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_OUT_VAL	DLN2_CMD(0x0D, DLN2_GPIO_ID)
+#define DLN2_GPIO_CONDITION_MET_EV	DLN2_CMD(0x0F, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_ENABLE		DLN2_CMD(0x10, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_DISABLE		DLN2_CMD(0x11, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_DIRECTION	DLN2_CMD(0x13, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_DIRECTION	DLN2_CMD(0x14, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_EVENT_CFG	DLN2_CMD(0x1E, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_EVENT_CFG	DLN2_CMD(0x1F, DLN2_GPIO_ID)
+
+#define DLN2_GPIO_EVENT_NONE		0
+#define DLN2_GPIO_EVENT_CHANGE		1
+#define DLN2_GPIO_EVENT_LVL_HIGH	2
+#define DLN2_GPIO_EVENT_LVL_LOW		3
+#define DLN2_GPIO_EVENT_CHANGE_RISING	0x11
+#define DLN2_GPIO_EVENT_CHANGE_FALLING  0x21
+#define DLN2_GPIO_EVENT_MASK		0x0F
+
+#define DLN2_GPIO_MAX_PINS 32
+
+struct dln2_irq_work {
+	struct work_struct work;
+	struct dln2_gpio *dln2;
+	int pin;
+	int type;
+};
+
+struct dln2_gpio {
+	struct platform_device *pdev;
+	struct gpio_chip gpio;
+
+	/*
+	 * Cache pin direction to save us one transfer, since the hardware has
+	 * separate commands to read the in and out values.
+	 */
+	DECLARE_BITMAP(output_enabled, DLN2_GPIO_MAX_PINS);
+
+	DECLARE_BITMAP(irqs_masked, DLN2_GPIO_MAX_PINS);
+	DECLARE_BITMAP(irqs_enabled, DLN2_GPIO_MAX_PINS);
+	DECLARE_BITMAP(irqs_pending, DLN2_GPIO_MAX_PINS);
+	struct dln2_irq_work *irq_work;
+};
+
+struct dln2_gpio_pin {
+	__le16 pin;
+};
+
+struct dln2_gpio_pin_val {
+	__le16 pin __packed;
+	u8 value;
+};
+
+static int dln2_gpio_get_pin_count(struct platform_device *pdev)
+{
+	int ret;
+	__le16 count;
+	int len = sizeof(count);
+
+	ret = dln2_transfer_rx(pdev, DLN2_GPIO_GET_PIN_COUNT, &count, &len);
+	if (ret < 0)
+		return ret;
+	if (len < sizeof(count))
+		return -EPROTO;
+
+	return le16_to_cpu(count);
+}
+
+static int dln2_gpio_pin_cmd(struct dln2_gpio *dln2, int cmd, unsigned pin)
+{
+	struct dln2_gpio_pin req = {
+		.pin = cpu_to_le16(pin),
+	};
+
+	return dln2_transfer_tx(dln2->pdev, cmd, &req, sizeof(req));
+}
+
+static int dln2_gpio_pin_val(struct dln2_gpio *dln2, int cmd, unsigned int pin)
+{
+	int ret;
+	struct dln2_gpio_pin req = {
+		.pin = cpu_to_le16(pin),
+	};
+	struct dln2_gpio_pin_val rsp;
+	int len = sizeof(rsp);
+
+	ret = dln2_transfer(dln2->pdev, cmd, &req, sizeof(req), &rsp, &len);
+	if (ret < 0)
+		return ret;
+	if (len < sizeof(rsp) || req.pin != rsp.pin)
+		return -EPROTO;
+
+	return rsp.value;
+}
+
+static int dln2_gpio_pin_get_in_val(struct dln2_gpio *dln2, unsigned int pin)
+{
+	int ret;
+
+	ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_VAL, pin);
+	if (ret < 0)
+		return ret;
+	return !!ret;
+}
+
+static int dln2_gpio_pin_get_out_val(struct dln2_gpio *dln2, unsigned int pin)
+{
+	int ret;
+
+	ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_OUT_VAL, pin);
+	if (ret < 0)
+		return ret;
+	return !!ret;
+}
+
+static void dln2_gpio_pin_set_out_val(struct dln2_gpio *dln2,
+				      unsigned int pin, int value)
+{
+	struct dln2_gpio_pin_val req = {
+		.pin = cpu_to_le16(pin),
+		.value = value,
+	};
+
+	dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_OUT_VAL, &req,
+			 sizeof(req));
+}
+
+#define DLN2_GPIO_DIRECTION_IN		0
+#define DLN2_GPIO_DIRECTION_OUT		1
+
+static int dln2_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+	struct dln2_gpio_pin req = {
+		.pin = cpu_to_le16(offset),
+	};
+	struct dln2_gpio_pin_val rsp;
+	int len = sizeof(rsp);
+	int ret;
+
+	ret = dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_ENABLE, offset);
+	if (ret < 0)
+		return ret;
+
+	/* cache the pin direction */
+	ret = dln2_transfer(dln2->pdev, DLN2_GPIO_PIN_GET_DIRECTION,
+			    &req, sizeof(req), &rsp, &len);
+	if (ret < 0)
+		return ret;
+	if (len < sizeof(rsp) || req.pin != rsp.pin) {
+		ret = -EPROTO;
+		goto out_disable;
+	}
+
+	switch (rsp.value) {
+	case DLN2_GPIO_DIRECTION_IN:
+		clear_bit(offset, dln2->output_enabled);
+		return 0;
+	case DLN2_GPIO_DIRECTION_OUT:
+		set_bit(offset, dln2->output_enabled);
+		return 0;
+	default:
+		ret = -EPROTO;
+		goto out_disable;
+	}
+
+out_disable:
+	dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset);
+	return ret;
+}
+
+static void dln2_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+
+	dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset);
+}
+
+static int dln2_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+
+	if (test_bit(offset, dln2->output_enabled))
+		return GPIOF_DIR_OUT;
+
+	return GPIOF_DIR_IN;
+}
+
+static int dln2_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+	int dir;
+
+	dir = dln2_gpio_get_direction(chip, offset);
+	if (dir < 0)
+		return dir;
+
+	if (dir == GPIOF_DIR_IN)
+		return dln2_gpio_pin_get_in_val(dln2, offset);
+
+	return dln2_gpio_pin_get_out_val(dln2, offset);
+}
+
+static void dln2_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+
+	dln2_gpio_pin_set_out_val(dln2, offset, value);
+}
+
+static int dln2_gpio_set_direction(struct gpio_chip *chip, unsigned offset,
+				   unsigned dir)
+{
+	struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+	struct dln2_gpio_pin_val req = {
+		.pin = cpu_to_le16(offset),
+		.value = dir,
+	};
+	int ret;
+
+	ret = dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_DIRECTION,
+			       &req, sizeof(req));
+	if (ret < 0)
+		return ret;
+
+	if (dir == DLN2_GPIO_DIRECTION_OUT)
+		set_bit(offset, dln2->output_enabled);
+	else
+		clear_bit(offset, dln2->output_enabled);
+
+	return ret;
+}
+
+static int dln2_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_IN);
+}
+
+static int dln2_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				      int value)
+{
+	return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_OUT);
+}
+
+static int dln2_gpio_set_debounce(struct gpio_chip *chip, unsigned offset,
+				  unsigned debounce)
+{
+	struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+	__le32 duration = cpu_to_le32(debounce);
+
+	return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_SET_DEBOUNCE,
+				&duration, sizeof(duration));
+}
+
+static int dln2_gpio_set_event_cfg(struct dln2_gpio *dln2, unsigned pin,
+				   unsigned type, unsigned period)
+{
+	struct {
+		__le16 pin;
+		u8 type;
+		__le16 period;
+	} __packed req = {
+		.pin = cpu_to_le16(pin),
+		.type = type,
+		.period = cpu_to_le16(period),
+	};
+
+	return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_EVENT_CFG,
+				&req, sizeof(req));
+}
+
+static void dln2_irq_work(struct work_struct *w)
+{
+	struct dln2_irq_work *iw = container_of(w, struct dln2_irq_work, work);
+	struct dln2_gpio *dln2 = iw->dln2;
+	u8 type = iw->type & DLN2_GPIO_EVENT_MASK;
+
+	if (test_bit(iw->pin, dln2->irqs_enabled))
+		dln2_gpio_set_event_cfg(dln2, iw->pin, type, 0);
+	else
+		dln2_gpio_set_event_cfg(dln2, iw->pin, DLN2_GPIO_EVENT_NONE, 0);
+}
+
+static void dln2_irq_enable(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+	int pin = irqd_to_hwirq(irqd);
+
+	set_bit(pin, dln2->irqs_enabled);
+	schedule_work(&dln2->irq_work[pin].work);
+}
+
+static void dln2_irq_disable(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+	int pin = irqd_to_hwirq(irqd);
+
+	clear_bit(pin, dln2->irqs_enabled);
+	schedule_work(&dln2->irq_work[pin].work);
+}
+
+static void dln2_irq_mask(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+	int pin = irqd_to_hwirq(irqd);
+
+	set_bit(pin, dln2->irqs_masked);
+}
+
+static void dln2_irq_unmask(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+	struct device *dev = dln2->gpio.dev;
+	int pin = irqd_to_hwirq(irqd);
+
+	if (test_and_clear_bit(pin, dln2->irqs_pending)) {
+		int irq;
+
+		irq = irq_find_mapping(dln2->gpio.irqdomain, pin);
+		if (!irq) {
+			dev_err(dev, "pin %d not mapped to IRQ\n", pin);
+			return;
+		}
+
+		generic_handle_irq(irq);
+	}
+}
+
+static int dln2_irq_set_type(struct irq_data *irqd, unsigned type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+	int pin = irqd_to_hwirq(irqd);
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_LOW;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_FALLING;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct irq_chip dln2_gpio_irqchip = {
+	.name = "dln2-irq",
+	.irq_enable = dln2_irq_enable,
+	.irq_disable = dln2_irq_disable,
+	.irq_mask = dln2_irq_mask,
+	.irq_unmask = dln2_irq_unmask,
+	.irq_set_type = dln2_irq_set_type,
+};
+
+static void dln2_gpio_event(struct platform_device *pdev, u16 echo,
+			    const void *data, int len)
+{
+	int pin, irq;
+	const struct {
+		__le16 count;
+		__u8 type;
+		__le16 pin;
+		__u8 value;
+	} __packed *event = data;
+	struct dln2_gpio *dln2 = platform_get_drvdata(pdev);
+
+	if (len < sizeof(*event)) {
+		dev_err(dln2->gpio.dev, "short event message\n");
+		return;
+	}
+
+	pin = le16_to_cpu(event->pin);
+	if (pin >= dln2->gpio.ngpio) {
+		dev_err(dln2->gpio.dev, "out of bounds pin %d\n", pin);
+		return;
+	}
+
+	irq = irq_find_mapping(dln2->gpio.irqdomain, pin);
+	if (!irq) {
+		dev_err(dln2->gpio.dev, "pin %d not mapped to IRQ\n", pin);
+		return;
+	}
+
+	if (!test_bit(pin, dln2->irqs_enabled))
+		return;
+	if (test_bit(pin, dln2->irqs_masked)) {
+		set_bit(pin, dln2->irqs_pending);
+		return;
+	}
+
+	switch (dln2->irq_work[pin].type) {
+	case DLN2_GPIO_EVENT_CHANGE_RISING:
+		if (event->value)
+			generic_handle_irq(irq);
+		break;
+	case DLN2_GPIO_EVENT_CHANGE_FALLING:
+		if (!event->value)
+			generic_handle_irq(irq);
+		break;
+	default:
+		generic_handle_irq(irq);
+	}
+}
+
+static int dln2_gpio_probe(struct platform_device *pdev)
+{
+	struct dln2_gpio *dln2;
+	struct device *dev = &pdev->dev;
+	int pins;
+	int i, ret;
+
+	pins = dln2_gpio_get_pin_count(pdev);
+	if (pins < 0) {
+		dev_err(dev, "failed to get pin count: %d\n", pins);
+		return pins;
+	}
+	if (pins > DLN2_GPIO_MAX_PINS) {
+		pins = DLN2_GPIO_MAX_PINS;
+		dev_warn(dev, "clamping pins to %d\n", DLN2_GPIO_MAX_PINS);
+	}
+
+	dln2 = devm_kzalloc(&pdev->dev, sizeof(*dln2), GFP_KERNEL);
+	if (!dln2)
+		return -ENOMEM;
+
+	dln2->irq_work = devm_kcalloc(&pdev->dev, pins,
+				      sizeof(struct dln2_irq_work), GFP_KERNEL);
+	if (!dln2->irq_work)
+		return -ENOMEM;
+	for (i = 0; i < pins; i++) {
+		INIT_WORK(&dln2->irq_work[i].work, dln2_irq_work);
+		dln2->irq_work[i].pin = i;
+		dln2->irq_work[i].dln2 = dln2;
+	}
+
+	dln2->pdev = pdev;
+
+	dln2->gpio.label = "dln2";
+	dln2->gpio.dev = dev;
+	dln2->gpio.owner = THIS_MODULE;
+	dln2->gpio.base = -1;
+	dln2->gpio.ngpio = pins;
+	dln2->gpio.exported = true;
+	dln2->gpio.can_sleep = true;
+	dln2->gpio.irq_not_threaded = true;
+	dln2->gpio.set = dln2_gpio_set;
+	dln2->gpio.get = dln2_gpio_get;
+	dln2->gpio.request = dln2_gpio_request;
+	dln2->gpio.free = dln2_gpio_free;
+	dln2->gpio.get_direction = dln2_gpio_get_direction;
+	dln2->gpio.direction_input = dln2_gpio_direction_input;
+	dln2->gpio.direction_output = dln2_gpio_direction_output;
+	dln2->gpio.set_debounce = dln2_gpio_set_debounce;
+
+	platform_set_drvdata(pdev, dln2);
+
+	ret = gpiochip_add(&dln2->gpio);
+	if (ret < 0) {
+		dev_err(dev, "failed to add gpio chip: %d\n", ret);
+		goto out;
+	}
+
+	ret = gpiochip_irqchip_add(&dln2->gpio, &dln2_gpio_irqchip, 0,
+				   handle_simple_irq, IRQ_TYPE_NONE);
+	if (ret < 0) {
+		dev_err(dev, "failed to add irq chip: %d\n", ret);
+		goto out_gpiochip_remove;
+	}
+
+	ret = dln2_register_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV,
+				     dln2_gpio_event);
+	if (ret) {
+		dev_err(dev, "failed to register event cb: %d\n", ret);
+		goto out_gpiochip_remove;
+	}
+
+	return 0;
+
+out_gpiochip_remove:
+	gpiochip_remove(&dln2->gpio);
+out:
+	return ret;
+}
+
+static int dln2_gpio_remove(struct platform_device *pdev)
+{
+	struct dln2_gpio *dln2 = platform_get_drvdata(pdev);
+	int i;
+
+	dln2_unregister_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV);
+	for (i = 0; i < dln2->gpio.ngpio; i++)
+		flush_work(&dln2->irq_work[i].work);
+	gpiochip_remove(&dln2->gpio);
+
+	return 0;
+}
+
+static struct platform_driver dln2_gpio_driver = {
+	.driver.name	= "dln2-gpio",
+	.probe		= dln2_gpio_probe,
+	.remove		= dln2_gpio_remove,
+};
+
+module_platform_driver(dln2_gpio_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com");
+MODULE_DESCRIPTION("Driver for the Diolan DLN2 GPIO interface");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:dln2-gpio");
diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
index ae0f6466eb09..abdcf58935f5 100644
--- a/drivers/gpio/gpio-tc3589x.c
+++ b/drivers/gpio/gpio-tc3589x.c
@@ -262,7 +262,7 @@ static int tc3589x_gpio_probe(struct platform_device *pdev)
 	tc3589x_gpio->chip = template_chip;
 	tc3589x_gpio->chip.ngpio = tc3589x->num_gpio;
 	tc3589x_gpio->chip.dev = &pdev->dev;
-	tc3589x_gpio->chip.base = (pdata) ? pdata->gpio_base : -1;
+	tc3589x_gpio->chip.base = -1;
 
 #ifdef CONFIG_OF_GPIO
 	tc3589x_gpio->chip.of_node = np;
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index e6d8e18dae97..6a58b6c723aa 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -641,9 +641,6 @@ static int sensor_hub_probe(struct hid_device *hdev,
 					goto err_stop_hw;
 			}
 			sd->hid_sensor_hub_client_devs[
-				sd->hid_sensor_client_cnt].id =
-							PLATFORM_DEVID_AUTO;
-			sd->hid_sensor_hub_client_devs[
 				sd->hid_sensor_client_cnt].name = name;
 			sd->hid_sensor_hub_client_devs[
 				sd->hid_sensor_client_cnt].platform_data =
@@ -659,8 +656,9 @@ static int sensor_hub_probe(struct hid_device *hdev,
 	if (last_hsdev)
 		last_hsdev->end_collection_index = i;
 
-	ret = mfd_add_devices(&hdev->dev, 0, sd->hid_sensor_hub_client_devs,
-		sd->hid_sensor_client_cnt, NULL, 0, NULL);
+	ret = mfd_add_hotplug_devices(&hdev->dev,
+			sd->hid_sensor_hub_client_devs,
+			sd->hid_sensor_client_cnt);
 	if (ret < 0)
 		goto err_stop_hw;
 
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 917c3585f45b..b4d135cc2f39 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -881,6 +881,16 @@ config I2C_DIOLAN_U2C
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-diolan-u2c.
 
+config I2C_DLN2
+       tristate "Diolan DLN-2 USB I2C adapter"
+       depends on MFD_DLN2
+       help
+	 If you say yes to this option, support will be included for Diolan
+	 DLN2, a USB to I2C interface.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called i2c-dln2.
+
 config I2C_PARPORT
 	tristate "Parallel port adapter"
 	depends on PARPORT
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 78d56c54ba2b..cdac7f15eab5 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_I2C_RCAR)		+= i2c-rcar.o
 
 # External I2C/SMBus adapter drivers
 obj-$(CONFIG_I2C_DIOLAN_U2C)	+= i2c-diolan-u2c.o
+obj-$(CONFIG_I2C_DLN2)		+= i2c-dln2.o
 obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
 obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
 obj-$(CONFIG_I2C_ROBOTFUZZ_OSIF)	+= i2c-robotfuzz-osif.o
diff --git a/drivers/i2c/busses/i2c-dln2.c b/drivers/i2c/busses/i2c-dln2.c
new file mode 100644
index 000000000000..b3fb86af4cbb
--- /dev/null
+++ b/