diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-06-02 16:14:07 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-06-02 16:14:07 -0700 |
commit | 0a58471541cc823ef8056d23945c39fec154481c (patch) | |
tree | 04a8499be0659ac16f82f3b0d0d8d2c2ccafe4dd /drivers | |
parent | ff933a0817f95efbeb97bec5ca609a13f8aed686 (diff) | |
parent | 08d38bebb4dcd6414944f8277ea5ea30010664fe (diff) |
Merge tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next
Pull ARM SoC cleanups from Olof Johansson:
"Cleanups for 3.16. Among these are:
- a bunch of misc cleanups for Broadcom platforms, mostly
housekeeping
- enabling Common Clock Framework on the older s3c24xx Samsung
chipsets
- cleanup of the Versatile Express system controller code, moving it
to syscon
- power management cleanups for OMAP platforms
plus a handful of other cleanups across the place"
* tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORM
clk: samsung: fix build error
ARM: vexpress: refine dependencies for new code
clk: samsung: clk-s3c2410-dlck: do not use PNAME macro as it declares __initdata
cpufreq: exynos: Fix the compile error
ARM: S3C24XX: move debug-macro.S into the common space
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
ARM: S3C24XX: trim down debug uart handling
ARM: compressed/head.S: remove s3c24xx special case
ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
ARM: EXYNOS: Remove exynos_subsys registration
ARM: EXYNOS: Remove duplicate lines in Makefile
ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_ops
ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under it
ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setup
ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exit
ARM: OMAP2+: PRCM: cleanup some header includes
...
Diffstat (limited to 'drivers')
39 files changed, 3036 insertions, 859 deletions
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 552373c4e362..286342778884 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -41,4 +41,14 @@ config ARM_CCI help Driver supporting the CCI cache coherent interconnect for ARM platforms. + +config VEXPRESS_CONFIG + bool "Versatile Express configuration bus" + default y if ARCH_VEXPRESS + depends on ARM || ARM64 + depends on OF + select REGMAP + help + Platform configuration infrastructure for the ARM Ltd. + Versatile Express. endmenu diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 8947bdd0de8b..f095aa771de9 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -10,3 +10,5 @@ obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o # CCI cache coherent interconnect for ARM platforms obj-$(CONFIG_ARM_CCI) += arm-cci.o + +obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c new file mode 100644 index 000000000000..a64763b6b5fd --- /dev/null +++ b/drivers/bus/vexpress-config.c @@ -0,0 +1,202 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2014 ARM Limited + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/vexpress.h> + + +struct vexpress_config_bridge { + struct vexpress_config_bridge_ops *ops; + void *context; +}; + + +static DEFINE_MUTEX(vexpress_config_mutex); +static struct class *vexpress_config_class; +static u32 vexpress_config_site_master = VEXPRESS_SITE_MASTER; + + +void vexpress_config_set_master(u32 site) +{ + vexpress_config_site_master = site; +} + +u32 vexpress_config_get_master(void) +{ + return vexpress_config_site_master; +} + +void vexpress_config_lock(void *arg) +{ + mutex_lock(&vexpress_config_mutex); +} + +void vexpress_config_unlock(void *arg) +{ + mutex_unlock(&vexpress_config_mutex); +} + + +static void vexpress_config_find_prop(struct device_node *node, + const char *name, u32 *val) +{ + /* Default value */ + *val = 0; + + of_node_get(node); + while (node) { + if (of_property_read_u32(node, name, val) == 0) { + of_node_put(node); + return; + } + node = of_get_next_parent(node); + } +} + +int vexpress_config_get_topo(struct device_node *node, u32 *site, + u32 *position, u32 *dcc) +{ + vexpress_config_find_prop(node, "arm,vexpress,site", site); + if (*site == VEXPRESS_SITE_MASTER) + *site = vexpress_config_site_master; + if (WARN_ON(vexpress_config_site_master == VEXPRESS_SITE_MASTER)) + return -EINVAL; + vexpress_config_find_prop(node, "arm,vexpress,position", position); + vexpress_config_find_prop(node, "arm,vexpress,dcc", dcc); + + return 0; +} + + +static void vexpress_config_devres_release(struct device *dev, void *res) +{ + struct vexpress_config_bridge *bridge = dev_get_drvdata(dev->parent); + struct regmap *regmap = res; + + bridge->ops->regmap_exit(regmap, bridge->context); +} + +struct regmap *devm_regmap_init_vexpress_config(struct device *dev) +{ + struct vexpress_config_bridge *bridge; + struct regmap *regmap; + struct regmap **res; + + if (WARN_ON(dev->parent->class != vexpress_config_class)) + return ERR_PTR(-ENODEV); + + bridge = dev_get_drvdata(dev->parent); + if (WARN_ON(!bridge)) + return ERR_PTR(-EINVAL); + + res = devres_alloc(vexpress_config_devres_release, sizeof(*res), + GFP_KERNEL); + if (!res) + return ERR_PTR(-ENOMEM); + + regmap = bridge->ops->regmap_init(dev, bridge->context); + if (IS_ERR(regmap)) { + devres_free(res); + return regmap; + } + + *res = regmap; + devres_add(dev, res); + + return regmap; +} +EXPORT_SYMBOL_GPL(devm_regmap_init_vexpress_config); + +struct device *vexpress_config_bridge_register(struct device *parent, + struct vexpress_config_bridge_ops *ops, void *context) +{ + struct device *dev; + struct vexpress_config_bridge *bridge; + + if (!vexpress_config_class) { + vexpress_config_class = class_create(THIS_MODULE, + "vexpress-config"); + if (IS_ERR(vexpress_config_class)) + return (void *)vexpress_config_class; + } + + dev = device_create(vexpress_config_class, parent, 0, + NULL, "%s.bridge", dev_name(parent)); + + if (IS_ERR(dev)) + return dev; + + bridge = devm_kmalloc(dev, sizeof(*bridge), GFP_KERNEL); + if (!bridge) { + put_device(dev); + device_unregister(dev); + return ERR_PTR(-ENOMEM); + } + bridge->ops = ops; + bridge->context = context; + + dev_set_drvdata(dev, bridge); + + dev_dbg(parent, "Registered bridge '%s', parent node %p\n", + dev_name(dev), parent->of_node); + + return dev; +} + + +static int vexpress_config_node_match(struct device *dev, const void *data) +{ + const struct device_node *node = data; + + dev_dbg(dev, "Parent node %p, looking for %p\n", + dev->parent->of_node, node); + + return dev->parent->of_node == node; +} + +static int vexpress_config_populate(struct device_node *node) +{ + struct device_node *bridge; + struct device *parent; + + bridge = of_parse_phandle(node, "arm,vexpress,config-bridge", 0); + if (!bridge) + return -EINVAL; + + parent = class_find_device(vexpress_config_class, NULL, bridge, + vexpress_config_node_match); + if (WARN_ON(!parent)) + return -ENODEV; + + return of_platform_populate(node, NULL, NULL, parent); +} + +static int __init vexpress_config_init(void) +{ + int err = 0; + struct device_node *node; + + /* Need the config devices early, before the "normal" devices... */ + for_each_compatible_node(node, NULL, "arm,vexpress,config-bus") { + err = vexpress_config_populate(node); + if (err) + break; + } + + return err; +} +postcore_initcall(vexpress_config_init); + diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 6f56d3a4f010..4fdfd6c70bd3 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -30,14 +30,7 @@ config COMMON_CLK_WM831X Supports the clocking subsystem of the WM831x/2x series of PMICs from Wolfson Microlectronics. -config COMMON_CLK_VERSATILE - bool "Clock driver for ARM Reference designs" - depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS || ARM64 - ---help--- - Supports clocking on ARM Reference designs: - - Integrator/AP and Integrator/CP - - RealView PB1176, EB, PB11MP and PBX - - Versatile Express +source "drivers/clk/versatile/Kconfig" config COMMON_CLK_MAX77686 tristate "Clock driver for Maxim 77686 MFD" diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 8eb4799237f0..2cb62f87e068 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -8,4 +8,8 @@ obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o +obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o +obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o +obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o +obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o obj-$(CONFIG_ARCH_S3C64XX) += clk-s3c64xx.o diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c index 81e6d2f49aa0..7fb0a28e65d5 100644 --- a/drivers/clk/samsung/clk-pll.c +++ b/drivers/clk/samsung/clk-pll.c @@ -11,6 +11,7 @@ #include <linux/errno.h> #include <linux/hrtimer.h> +#include <linux/delay.h> #include "clk.h" #include "clk-pll.h" @@ -59,6 +60,72 @@ static long samsung_pll_round_rate(struct clk_hw *hw, } /* + * PLL2126 Clock Type + */ + +#define PLL2126_MDIV_MASK (0xff) +#define PLL2126_PDIV_MASK (0x3f) +#define PLL2126_SDIV_MASK (0x3) +#define PLL2126_MDIV_SHIFT (16) +#define PLL2126_PDIV_SHIFT (8) +#define PLL2126_SDIV_SHIFT (0) + +static unsigned long samsung_pll2126_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLL2126_MDIV_SHIFT) & PLL2126_MDIV_MASK; + pdiv = (pll_con >> PLL2126_PDIV_SHIFT) & PLL2126_PDIV_MASK; + sdiv = (pll_con >> PLL2126_SDIV_SHIFT) & PLL2126_SDIV_MASK; + + fvco *= (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned long)fvco; +} + +static const struct clk_ops samsung_pll2126_clk_ops = { + .recalc_rate = samsung_pll2126_recalc_rate, +}; + +/* + * PLL3000 Clock Type + */ + +#define PLL3000_MDIV_MASK (0xff) +#define PLL3000_PDIV_MASK (0x3) +#define PLL3000_SDIV_MASK (0x3) +#define PLL3000_MDIV_SHIFT (16) +#define PLL3000_PDIV_SHIFT (8) +#define PLL3000_SDIV_SHIFT (0) + +static unsigned long samsung_pll3000_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLL3000_MDIV_SHIFT) & PLL3000_MDIV_MASK; + pdiv = (pll_con >> PLL3000_PDIV_SHIFT) & PLL3000_PDIV_MASK; + sdiv = (pll_con >> PLL3000_SDIV_SHIFT) & PLL3000_SDIV_MASK; + + fvco *= (2 * (mdiv + 8)); + do_div(fvco, pdiv << sdiv); + + return (unsigned long)fvco; +} + +static const struct clk_ops samsung_pll3000_clk_ops = { + .recalc_rate = samsung_pll3000_recalc_rate, +}; + +/* * PLL35xx Clock Type */ /* Maximum lock time can be 270 * PDIV cycles */ @@ -564,7 +631,9 @@ static const struct clk_ops samsung_pll46xx_clk_min_ops = { #define PLL6552_PDIV_MASK 0x3f #define PLL6552_SDIV_MASK 0x7 #define PLL6552_MDIV_SHIFT 16 +#define PLL6552_MDIV_SHIFT_2416 14 #define PLL6552_PDIV_SHIFT 8 +#define PLL6552_PDIV_SHIFT_2416 5 #define PLL6552_SDIV_SHIFT 0 static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw, @@ -575,8 +644,13 @@ static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw, u64 fvco = parent_rate; pll_con = __raw_readl(pll->con_reg); - mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK; - pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK; + if (pll->type == pll_6552_s3c2416) { + mdiv = (pll_con >> PLL6552_MDIV_SHIFT_2416) & PLL6552_MDIV_MASK; + pdiv = (pll_con >> PLL6552_PDIV_SHIFT_2416) & PLL6552_PDIV_MASK; + } else { + mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK; + pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK; + } sdiv = (pll_con >> PLL6552_SDIV_SHIFT) & PLL6552_SDIV_MASK; fvco *= mdiv; @@ -628,6 +702,169 @@ static const struct clk_ops samsung_pll6553_clk_ops = { }; /* + * PLL Clock Type of S3C24XX before S3C2443 + */ + +#define PLLS3C2410_MDIV_MASK (0xff) +#define PLLS3C2410_PDIV_MASK (0x1f) +#define PLLS3C2410_SDIV_MASK (0x3) +#define PLLS3C2410_MDIV_SHIFT (12) +#define PLLS3C2410_PDIV_SHIFT (4) +#define PLLS3C2410_SDIV_SHIFT (0) + +#define PLLS3C2410_ENABLE_REG_OFFSET 0x10 + +static unsigned long samsung_s3c2410_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK; + pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK; + sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK; + + fvco *= (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +static unsigned long samsung_s3c2440_mpll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK; + pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK; + sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK; + + fvco *= (2 * (mdiv + 8)); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +static int samsung_s3c2410_pll_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + const struct samsung_pll_rate_table *rate; + u32 tmp; + + /* Get required rate settings from table */ + rate = samsung_get_pll_settings(pll, drate); + if (!rate) { + pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, + drate, __clk_get_name(hw->clk)); + return -EINVAL; + } + + tmp = __raw_readl(pll->con_reg); + + /* Change PLL PMS values */ + tmp &= ~((PLLS3C2410_MDIV_MASK << PLLS3C2410_MDIV_SHIFT) | + (PLLS3C2410_PDIV_MASK << PLLS3C2410_PDIV_SHIFT) | + (PLLS3C2410_SDIV_MASK << PLLS3C2410_SDIV_SHIFT)); + tmp |= (rate->mdiv << PLLS3C2410_MDIV_SHIFT) | + (rate->pdiv << PLLS3C2410_PDIV_SHIFT) | + (rate->sdiv << PLLS3C2410_SDIV_SHIFT); + __raw_writel(tmp, pll->con_reg); + + /* Time to settle according to the manual */ + udelay(300); + + return 0; +} + +static int samsung_s3c2410_pll_enable(struct clk_hw *hw, int bit, bool enable) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_en = __raw_readl(pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET); + u32 pll_en_orig = pll_en; + + if (enable) + pll_en &= ~BIT(bit); + else + pll_en |= BIT(bit); + + __raw_writel(pll_en, pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET); + + /* if we started the UPLL, then allow to settle */ + if (enable && (pll_en_orig & BIT(bit))) + udelay(300); + + return 0; +} + +static int samsung_s3c2410_mpll_enable(struct clk_hw *hw) +{ + return samsung_s3c2410_pll_enable(hw, 5, true); +} + +static void samsung_s3c2410_mpll_disable(struct clk_hw *hw) +{ + samsung_s3c2410_pll_enable(hw, 5, false); +} + +static int samsung_s3c2410_upll_enable(struct clk_hw *hw) +{ + return samsung_s3c2410_pll_enable(hw, 7, true); +} + +static void samsung_s3c2410_upll_disable(struct clk_hw *hw) +{ + samsung_s3c2410_pll_enable(hw, 7, false); +} + +static const struct clk_ops samsung_s3c2410_mpll_clk_min_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, +}; + +static const struct clk_ops samsung_s3c2410_upll_clk_min_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_upll_enable, + .disable = samsung_s3c2410_upll_disable, +}; + +static const struct clk_ops samsung_s3c2440_mpll_clk_min_ops = { + .recalc_rate = samsung_s3c2440_mpll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, +}; + +static const struct clk_ops samsung_s3c2410_mpll_clk_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, + .round_rate = samsung_pll_round_rate, + .set_rate = samsung_s3c2410_pll_set_rate, +}; + +static const struct clk_ops samsung_s3c2410_upll_clk_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_upll_enable, + .disable = samsung_s3c2410_upll_disable, + .round_rate = samsung_pll_round_rate, + .set_rate = samsung_s3c2410_pll_set_rate, +}; + +static const struct clk_ops samsung_s3c2440_mpll_clk_ops = { + .recalc_rate = samsung_s3c2440_mpll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, + .round_rate = samsung_pll_round_rate, + .set_rate = samsung_s3c2410_pll_set_rate, +}; + +/* * PLL2550x Clock Type */ @@ -746,6 +983,12 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, } switch (pll_clk->type) { + case pll_2126: + init.ops = &samsung_pll2126_clk_ops; + break; + case pll_3000: + init.ops = &samsung_pll3000_clk_ops; + break; /* clk_ops for 35xx and 2550 are similar */ case pll_35xx: case pll_2550: @@ -773,6 +1016,7 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, init.ops = &samsung_pll36xx_clk_ops; break; case pll_6552: + case pll_6552_s3c2416: init.ops = &samsung_pll6552_clk_ops; break; case pll_6553: @@ -786,6 +1030,24 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, else init.ops = &samsung_pll46xx_clk_ops; break; + case pll_s3c2410_mpll: + if (!pll->rate_table) + init.ops = &samsung_s3c2410_mpll_clk_min_ops; + else + init.ops = &samsung_s3c2410_mpll_clk_ops; + break; + case pll_s3c2410_upll: + if (!pll->rate_table) + init.ops = &samsung_s3c2410_upll_clk_min_ops; + else + init.ops = &samsung_s3c2410_upll_clk_ops; + break; + case pll_s3c2440_mpll: + if (!pll->rate_table) + init.ops = &samsung_s3c2440_mpll_clk_min_ops; + else + init.ops = &samsung_s3c2440_mpll_clk_ops; + break; default: pr_warn("%s: Unknown pll type for pll clk %s\n", __func__, pll_clk->name); diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h index 6c39030080fb..6428bcc6df6f 100644 --- a/drivers/clk/samsung/clk-pll.h +++ b/drivers/clk/samsung/clk-pll.h @@ -13,6 +13,8 @@ #define __SAMSUNG_CLK_PLL_H enum samsung_pll_type { + pll_2126, + pll_3000, pll_35xx, pll_36xx, pll_2550, @@ -24,7 +26,11 @@ enum samsung_pll_type { pll_4650, pll_4650c, pll_6552, + pll_6552_s3c2416, pll_6553, + pll_s3c2410_mpll, + pll_s3c2410_upll, + pll_s3c2440_mpll, }; #define PLL_35XX_RATE(_rate, _m, _p, _s) \ diff --git a/drivers/clk/samsung/clk-s3c2410-dclk.c b/drivers/clk/samsung/clk-s3c2410-dclk.c new file mode 100644 index 000000000000..0449cc0458ed --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2410-dclk.c @@ -0,0 +1,440 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for s3c24xx external clock output. + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include "clk.h" + +/* legacy access to misccr, until dt conversion is finished */ +#include <mach/hardware.h> +#include <mach/regs-gpio.h> + +#define MUX_DCLK0 0 +#define MUX_DCLK1 1 +#define DIV_DCLK0 2 +#define DIV_DCLK1 3 +#define GATE_DCLK0 4 +#define GATE_DCLK1 5 +#define MUX_CLKOUT0 6 +#define MUX_CLKOUT1 7 +#define DCLK_MAX_CLKS (MUX_CLKOUT1 + 1) + +enum supported_socs { + S3C2410, + S3C2412, + S3C2440, + S3C2443, +}; + +struct s3c24xx_dclk_drv_data { + const char **clkout0_parent_names; + int clkout0_num_parents; + const char **clkout1_parent_names; + int clkout1_num_parents; + const char **mux_parent_names; + int mux_num_parents; +}; + +/* + * Clock for output-parent selection in misccr + */ + +struct s3c24xx_clkout { + struct clk_hw hw; + u32 mask; + u8 shift; +}; + +#define to_s3c24xx_clkout(_hw) container_of(_hw, struct s3c24xx_clkout, hw) + +static u8 s3c24xx_clkout_get_parent(struct clk_hw *hw) +{ + struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw); + int num_parents = __clk_get_num_parents(hw->clk); + u32 val; + + val = readl_relaxed(S3C24XX_MISCCR) >> clkout->shift; + val >>= clkout->shift; + val &= clkout->mask; + + if (val >= num_parents) + return -EINVAL; + + return val; +} + +static int s3c24xx_clkout_set_parent(struct clk_hw *hw, u8 index) +{ + struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw); + int ret = 0; + + s3c2410_modify_misccr((clkout->mask << clkout->shift), + (index << clkout->shift)); + + return ret; +} + +const struct clk_ops s3c24xx_clkout_ops = { + .get_parent = s3c24xx_clkout_get_parent, + .set_parent = s3c24xx_clkout_set_parent, + .determine_rate = __clk_mux_determine_rate, +}; + +struct clk *s3c24xx_register_clkout(struct device *dev, const char *name, + const char **parent_names, u8 num_parents, + u8 shift, u32 mask) +{ + struct s3c24xx_clkout *clkout; + struct clk *clk; + struct clk_init_data init; + + /* allocate the clkout */ + clkout = kzalloc(sizeof(*clkout), GFP_KERNEL); + if (!clkout) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &s3c24xx_clkout_ops; + init.flags = CLK_IS_BASIC; + init.parent_names = parent_names; + init.num_parents = num_parents; + + clkout->shift = shift; + clkout->mask = mask; + clkout->hw.init = &init; + + clk = clk_register(dev, &clkout->hw); + + return clk; +} + +/* + * dclk and clkout init + */ + +struct s3c24xx_dclk { + struct device *dev; + void __iomem *base; + struct clk_onecell_data clk_data; + struct notifier_block dclk0_div_change_nb; + struct notifier_block dclk1_div_change_nb; + spinlock_t dclk_lock; + unsigned long reg_save; +}; + +#define to_s3c24xx_dclk0(x) \ + container_of(x, struct s3c24xx_dclk, dclk0_div_change_nb) + +#define to_s3c24xx_dclk1(x) \ + container_of(x, struct s3c24xx_dclk, dclk1_div_change_nb) + +static const char *dclk_s3c2410_p[] = { "pclk", "uclk" }; +static const char *clkout0_s3c2410_p[] = { "mpll", "upll", "fclk", "hclk", "pclk", + "gate_dclk0" }; +static const char *clkout1_s3c2410_p[] = { "mpll", "upll", "fclk", "hclk", "pclk", + "gate_dclk1" }; + +static const char *clkout0_s3c2412_p[] = { "mpll", "upll", "rtc_clkout", + "hclk", "pclk", "gate_dclk0" }; +static const char *clkout1_s3c2412_p[] = { "xti", "upll", "fclk", "hclk", "pclk", + "gate_dclk1" }; + +static const char *clkout0_s3c2440_p[] = { "xti", "upll", "fclk", "hclk", "pclk", + "gate_dclk0" }; +static const char *clkout1_s3c2440_p[] = { "mpll", "upll", "rtc_clkout", + "hclk", "pclk", "gate_dclk1" }; + +static const char *dclk_s3c2443_p[] = { "pclk", "epll" }; +static const char *clkout0_s3c2443_p[] = { "xti", "epll", "armclk", "hclk", "pclk", + "gate_dclk0" }; +static const char *clkout1_s3c2443_p[] = { "dummy", "epll", "rtc_clkout", + "hclk", "pclk", "gate_dclk1" }; + +#define DCLKCON_DCLK_DIV_MASK 0xf +#define DCLKCON_DCLK0_DIV_SHIFT 4 +#define DCLKCON_DCLK0_CMP_SHIFT 8 +#define DCLKCON_DCLK1_DIV_SHIFT 20 +#define DCLKCON_DCLK1_CMP_SHIFT 24 + +static void s3c24xx_dclk_update_cmp(struct s3c24xx_dclk *s3c24xx_dclk, + int div_shift, int cmp_shift) +{ + unsigned long flags = 0; + u32 dclk_con, div, cmp; + + spin_lock_irqsave(& |