Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] orion5x_wdt.c: add spinlocking
  [WATCHDOG] Orion: add hardware watchdog support
  [WATCHDOG] omap_wdt.c: cleanup a bit omap_wdt.c
  [WATCHDOG] omap_wdt.c: another ioremap() fix
  [WATCHDOG] omap_wdt.c: sync linux-omap changes
  [WATCHDOG] Add AT91SAM9X watchdog
  [WATCHDOG] Add driver for winbond w83697ug/uf watchdog feature
  [WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/K

8 files changed, 1970 insertions, 132 deletions

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index c51036716700..1a22fe782a27 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -66,6 +66,13 @@ config AT91RM9200_WATCHDOG
 	  Watchdog timer embedded into AT91RM9200 chips. This will reboot your
 	  system when the timeout is reached.
 
+config AT91SAM9X_WATCHDOG
+	tristate "AT91SAM9X watchdog"
+	depends on WATCHDOG && (ARCH_AT91SAM9260 || ARCH_AT91SAM9261)
+	help
+	  Watchdog timer embedded into AT91SAM9X chips. This will reboot your
+	  system when the timeout is reached.
+
 config 21285_WATCHDOG
 	tristate "DC21285 watchdog"
 	depends on FOOTBRIDGE
@@ -217,6 +224,15 @@ config DAVINCI_WATCHDOG
 	  NOTE: once enabled, this timer cannot be disabled.
 	  Say N if you are unsure.
 
+config ORION5X_WATCHDOG
+	tristate "Orion5x watchdog"
+	depends on ARCH_ORION5X
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in the Orion5x ARM SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called orion5x_wdt.
+
 # ARM26 Architecture
 
 # AVR32 Architecture
@@ -416,6 +432,18 @@ config IT8712F_WDT
 	  To compile this driver as a module, choose M here: the
 	  module will be called it8712f_wdt.
 
+config IT87_WDT
+	tristate "IT87 Watchdog Timer"
+	depends on X86 && EXPERIMENTAL
+	---help---
+	  This is the driver for the hardware watchdog on the ITE IT8716,
+	  IT8718, IT8726, IT8712(Version J,K) Super I/O chips. This watchdog
+	  simply watches your kernel to make sure it doesn't freeze, and if
+	  it does, it reboots your computer after a certain amount of time.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called it87_wdt.
+
 config HP_WATCHDOG
 	tristate "HP Proliant iLO 2 Hardware Watchdog Timer"
 	depends on X86
@@ -573,6 +601,21 @@ config W83697HF_WDT
 
 	  Most people will say N.
 
+config W83697UG_WDT
+	tristate "W83697UG/W83697UF Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on the W83697UG/UF
+	  chipset as used in MSI Fuzzy CX700 VIA motherboards (and likely others).
+	  This watchdog simply watches your kernel to make sure it doesn't
+	  freeze, and if it does, it reboots your computer after a certain
+	  amount of time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w83697ug_wdt.
+
+	  Most people will say N.
+
 config W83877F_WDT
 	tristate "W83877F (EMACS) Watchdog Timer"
 	depends on X86
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 6702d2ef0434..e352bbb7630b 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
 
 # ARM Architecture
 obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
+obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
 obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
 obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
 obj-$(CONFIG_977_WATCHDOG) += wdt977.o
@@ -39,6 +40,7 @@ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
 obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
 obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
 obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
+obj-$(CONFIG_ORION5X_WATCHDOG) += orion5x_wdt.o
 
 # ARM26 Architecture
 
@@ -71,6 +73,7 @@ ifeq ($(CONFIG_ITCO_VENDOR_SUPPORT),y)
 obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o
 endif
 obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o
+obj-$(CONFIG_IT87_WDT) += it87_wdt.o
 obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o
 obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
 obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
@@ -83,6 +86,7 @@ obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
 obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
 obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
 obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o
+obj-$(CONFIG_W83697UG_WDT) += w83697ug_wdt.o
 obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
 obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
 obj-$(CONFIG_MACHZ_WDT) += machzwd.o
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
new file mode 100644
index 000000000000..b4babfc31586
--- /dev/null
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -0,0 +1,328 @@
+/*
+ * Watchdog driver for Atmel AT91SAM9x processors.
+ *
+ * Copyright (C) 2008 Renaud CERRATO r.cerrato@til-technologies.fr
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * The Watchdog Timer Mode Register can be only written to once. If the
+ * timeout need to be set from Linux, be sure that the bootstrap or the
+ * bootloader doesn't write to this register.
+ */
+
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+#include <linux/bitops.h>
+#include <linux/uaccess.h>
+
+#include <asm/arch/at91_wdt.h>
+
+#define DRV_NAME "AT91SAM9 Watchdog"
+
+/* AT91SAM9 watchdog runs a 12bit counter @ 256Hz,
+ * use this to convert a watchdog
+ * value from/to milliseconds.
+ */
+#define ms_to_ticks(t)	(((t << 8) / 1000) - 1)
+#define ticks_to_ms(t)	(((t + 1) * 1000) >> 8)
+
+/* Hardware timeout in seconds */
+#define WDT_HW_TIMEOUT 2
+
+/* Timer heartbeat (500ms) */
+#define WDT_TIMEOUT	(HZ/2)
+
+/* User land timeout */
+#define WDT_HEARTBEAT 15
+static int heartbeat = WDT_HEARTBEAT;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
+	"(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static void at91_ping(unsigned long data);
+
+static struct {
+	unsigned long next_heartbeat;	/* the next_heartbeat for the timer */
+	unsigned long open;
+	char expect_close;
+	struct timer_list timer;	/* The timer that pings the watchdog */
+} at91wdt_private;
+
+/* ......................................................................... */
+
+
+/*
+ * Reload the watchdog timer.  (ie, pat the watchdog)
+ */
+static inline void at91_wdt_reset(void)
+{
+	at91_sys_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
+}
+
+/*
+ * Timer tick
+ */
+static void at91_ping(unsigned long data)
+{
+	if (time_before(jiffies, at91wdt_private.next_heartbeat) ||
+			(!nowayout && !at91wdt_private.open)) {
+		at91_wdt_reset();
+		mod_timer(&at91wdt_private.timer, jiffies + WDT_TIMEOUT);
+	} else
+		printk(KERN_CRIT DRV_NAME": I will reset your machine !\n");
+}
+
+/*
+ * Watchdog device is opened, and watchdog starts running.
+ */
+static int at91_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &at91wdt_private.open))
+		return -EBUSY;
+
+	at91wdt_private.next_heartbeat = jiffies + heartbeat * HZ;
+	mod_timer(&at91wdt_private.timer, jiffies + WDT_TIMEOUT);
+
+	return nonseekable_open(inode, file);
+}
+
+/*
+ * Close the watchdog device.
+ */
+static int at91_wdt_close(struct inode *inode, struct file *file)
+{
+	clear_bit(0, &at91wdt_private.open);
+
+	/* stop internal ping */
+	if (!at91wdt_private.expect_close)
+		del_timer(&at91wdt_private.timer);
+
+	at91wdt_private.expect_close = 0;
+	return 0;
+}
+
+/*
+ * Set the watchdog time interval in 1/256Hz (write-once)
+ * Counter is 12 bit.
+ */
+static int at91_wdt_settimeout(unsigned int timeout)
+{
+	unsigned int reg;
+	unsigned int mr;
+
+	/* Check if disabled */
+	mr = at91_sys_read(AT91_WDT_MR);
+	if (mr & AT91_WDT_WDDIS) {
+		printk(KERN_ERR DRV_NAME": sorry, watchdog is disabled\n");
+		return -EIO;
+	}
+
+	/*
+	 * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
+	 *
+	 * Since WDV is a 12-bit counter, the maximum period is
+	 * 4096 / 256 = 16 seconds.
+	 */
+	reg = AT91_WDT_WDRSTEN	/* causes watchdog reset */
+		/* | AT91_WDT_WDRPROC	causes processor reset only */
+		| AT91_WDT_WDDBGHLT	/* disabled in debug mode */
+		| AT91_WDT_WDD		/* restart at any time */
+		| (timeout & AT91_WDT_WDV);  /* timer value */
+	at91_sys_write(AT91_WDT_MR, reg);
+
+	return 0;
+}
+
+static const struct watchdog_info at91_wdt_info = {
+	.identity	= DRV_NAME,
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+};
+
+/*
+ * Handle commands from user-space.
+ */
+static long at91_wdt_ioctl(struct file *file,
+		unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_value;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &at91_wdt_info,
+				    sizeof(at91_wdt_info)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_KEEPALIVE:
+		at91wdt_private.next_heartbeat = jiffies + heartbeat * HZ;
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+
+		heartbeat = new_value;
+		at91wdt_private.next_heartbeat = jiffies + heartbeat * HZ;
+
+		return put_user(new_value, p);  /* return current value */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	}
+	return -ENOTTY;
+}
+
+/*
+ * Pat the watchdog whenever device is written to.
+ */
+static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len,
+      loff_t *ppos)
+{
+	if (!len)
+		return 0;
+
+	/* Scan for magic character */
+	if (!nowayout) {
+		size_t i;
+
+		at91wdt_private.expect_close = 0;
+
+		for (i = 0; i < len; i++) {
+			char c;
+			if (get_user(c, data + i))
+				return -EFAULT;
+			if (c == 'V') {
+				at91wdt_private.expect_close = 42;
+				break;
+			}
+		}
+	}
+
+	at91wdt_private.next_heartbeat = jiffies + heartbeat * HZ;
+
+	return len;
+}
+
+/* ......................................................................... */
+
+static const struct file_operations at91wdt_fops = {
+	.owner			= THIS_MODULE,
+	.llseek			= no_llseek,
+	.unlocked_ioctl	= at91_wdt_ioctl,
+	.open			= at91_wdt_open,
+	.release		= at91_wdt_close,
+	.write			= at91_wdt_write,
+};
+
+static struct miscdevice at91wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &at91wdt_fops,
+};
+
+static int __init at91wdt_probe(struct platform_device *pdev)
+{
+	int res;
+
+	if (at91wdt_miscdev.parent)
+		return -EBUSY;
+	at91wdt_miscdev.parent = &pdev->dev;
+
+	/* Set watchdog */
+	res = at91_wdt_settimeout(ms_to_ticks(WDT_HW_TIMEOUT * 1000));
+	if (res)
+		return res;
+
+	res = misc_register(&at91wdt_miscdev);
+	if (res)
+		return res;
+
+	at91wdt_private.next_heartbeat = jiffies + heartbeat * HZ;
+	setup_timer(&at91wdt_private.timer, at91_ping, 0);
+	mod_timer(&at91wdt_private.timer, jiffies + WDT_TIMEOUT);
+
+	printk(KERN_INFO DRV_NAME " enabled (heartbeat=%d sec, nowayout=%d)\n",
+		heartbeat, nowayout);
+
+	return 0;
+}
+
+static int __exit at91wdt_remove(struct platform_device *pdev)
+{
+	int res;
+
+	res = misc_deregister(&at91wdt_miscdev);
+	if (!res)
+		at91wdt_miscdev.parent = NULL;
+
+	return res;
+}
+
+#ifdef CONFIG_PM
+
+static int at91wdt_suspend(struct platform_device *pdev, pm_message_t message)
+{
+	return 0;
+}
+
+static int at91wdt_resume(struct platform_device *pdev)
+{
+	return 0;
+}
+
+#else
+#define at91wdt_suspend	NULL
+#define at91wdt_resume	NULL
+#endif
+
+static struct platform_driver at91wdt_driver = {
+	.remove		= __exit_p(at91wdt_remove),
+	.suspend	= at91wdt_suspend,
+	.resume		= at91wdt_resume,
+	.driver		= {
+		.name	= "at91_wdt",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init at91sam_wdt_init(void)
+{
+	return platform_driver_probe(&at91wdt_driver, at91wdt_probe);
+}
+
+static void __exit at91sam_wdt_exit(void)
+{
+	platform_driver_unregister(&at91wdt_driver);
+}
+
+module_init(at91sam_wdt_init);
+module_exit(at91sam_wdt_exit);
+
+MODULE_AUTHOR("Renaud CERRATO <r.cerrato@til-technologies.fr>");
+MODULE_DESCRIPTION("Watchdog driver for Atmel AT91SAM9x processors");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c
new file mode 100644
index 000000000000..afb8af397a9f
--- /dev/null
+++ b/drivers/watchdog/it87_wdt.c
@@ -0,0 +1,725 @@
+/*
+ *	Watchdog Timer Driver
+ *	   for ITE IT87xx Environment Control - Low Pin Count Input / Output
+ *
+ *	(c) Copyright 2007  Oliver Schuster <olivers137@aol.com>
+ *
+ *	Based on softdog.c	by Alan Cox,
+ *		 83977f_wdt.c	by Jose Goncalves,
+ *		 it87.c		by Chris Gauthron, Jean Delvare
+ *
+ *	Data-sheets: Publicly available at the ITE website
+ *		    http://www.ite.com.tw/
+ *
+ *	Support of the watchdog timers, which are available on
+ *	IT8716, IT8718, IT8726 and IT8712 (J,K version).
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/watchdog.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+
+#define WATCHDOG_VERSION	"1.12"
+#define WATCHDOG_NAME		"IT87 WDT"
+#define PFX			WATCHDOG_NAME ": "
+#define DRIVER_VERSION		WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n"
+#define WD_MAGIC		'V'
+
+/* Defaults for Module Parameter */
+#define DEFAULT_NOGAMEPORT	0
+#define DEFAULT_EXCLUSIVE	1
+#define DEFAULT_TIMEOUT 	60
+#define DEFAULT_TESTMODE	0
+#define DEFAULT_NOWAYOUT	WATCHDOG_NOWAYOUT
+
+/* IO Ports */
+#define REG		0x2e
+#define VAL		0x2f
+
+/* Logical device Numbers LDN */
+#define GPIO		0x07
+#define GAMEPORT	0x09
+#define CIR		0x0a
+
+/* Configuration Registers and Functions */
+#define LDNREG		0x07
+#define CHIPID		0x20
+#define CHIPREV 	0x22
+#define ACTREG		0x30
+#define BASEREG 	0x60
+
+/* Chip Id numbers */
+#define NO_DEV_ID	0xffff
+#define IT8705_ID	0x8705
+#define IT8712_ID	0x8712
+#define IT8716_ID	0x8716
+#define IT8718_ID	0x8718
+#define IT8726_ID	0x8726	/* the data sheet suggest wrongly 0x8716 */
+
+/* GPIO Configuration Registers LDN=0x07 */
+#define WDTCTRL 	0x71
+#define WDTCFG		0x72
+#define WDTVALLSB	0x73
+#define WDTVALMSB	0x74
+
+/* GPIO Bits WDTCTRL */
+#define WDT_CIRINT	0x80
+#define WDT_MOUSEINT	0x40
+#define WDT_KYBINT	0x20
+#define WDT_GAMEPORT	0x10 /* not it8718 */
+#define WDT_FORCE	0x02
+#define WDT_ZERO	0x01
+
+/* GPIO Bits WDTCFG */
+#define WDT_TOV1	0x80
+#define WDT_KRST	0x40
+#define WDT_TOVE	0x20
+#define WDT_PWROK	0x10
+#define WDT_INT_MASK	0x0f
+
+/* CIR Configuration Register LDN=0x0a */
+#define CIR_ILS 	0x70
+
+/* The default Base address is not always available, we use this */
+#define CIR_BASE	0x0208
+
+/* CIR Controller */
+#define CIR_DR(b)	(b)
+#define CIR_IER(b)	(b + 1)
+#define CIR_RCR(b)	(b + 2)
+#define CIR_TCR1(b)	(b + 3)
+#define CIR_TCR2(b)	(b + 4)
+#define CIR_TSR(b)	(b + 5)
+#define CIR_RSR(b)	(b + 6)
+#define CIR_BDLR(b)	(b + 5)
+#define CIR_BDHR(b)	(b + 6)
+#define CIR_IIR(b)	(b + 7)
+
+/* Default Base address of Game port */
+#define GP_BASE_DEFAULT	0x0201
+
+/* wdt_status */
+#define WDTS_TIMER_RUN	0
+#define WDTS_DEV_OPEN	1
+#define WDTS_KEEPALIVE	2
+#define WDTS_LOCKED	3
+#define WDTS_USE_GP	4
+#define WDTS_EXPECTED	5
+
+static	unsigned int base, gpact, ciract;
+static	unsigned long wdt_status;
+static	DEFINE_SPINLOCK(spinlock);
+
+static	int nogameport = DEFAULT_NOGAMEPORT;
+static	int exclusive  = DEFAULT_EXCLUSIVE;
+static	int timeout    = DEFAULT_TIMEOUT;
+static	int testmode   = DEFAULT_TESTMODE;
+static	int nowayout   = DEFAULT_NOWAYOUT;
+
+module_param(nogameport, int, 0);
+MODULE_PARM_DESC(nogameport, "Forbid the activation of game port, default="
+		__MODULE_STRING(DEFAULT_NOGAMEPORT));
+module_param(exclusive, int, 0);
+MODULE_PARM_DESC(exclusive, "Watchdog exclusive device open, default="
+		__MODULE_STRING(DEFAULT_EXCLUSIVE));
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default="
+		__MODULE_STRING(DEFAULT_TIMEOUT));
+module_param(testmode, int, 0);
+MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default="
+		__MODULE_STRING(DEFAULT_TESTMODE));
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default="
+		__MODULE_STRING(WATCHDOG_NOWAYOUT));
+
+/* Superio Chip */
+
+static inline void superio_enter(void)
+{
+	outb(0x87, REG);
+	outb(0x01, REG);
+	outb(0x55, REG);
+	outb(0x55, REG);
+}
+
+static inline void superio_exit(void)
+{
+	outb(0x02, REG);
+	outb(0x02, VAL);
+}
+
+static inline void superio_select(int ldn)
+{
+	outb(LDNREG, REG);
+	outb(ldn, VAL);
+}
+
+static inline int superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+static inline void superio_outb(int val, int reg)
+{
+       outb(reg, REG);
+       outb(val, VAL);
+}
+
+static inline int superio_inw(int reg)
+{
+	int val;
+	outb(reg++, REG);
+	val = inb(VAL) << 8;
+	outb(reg, REG);
+	val |= inb(VAL);
+	return val;
+}
+
+static inline void superio_outw(int val, int reg)
+{
+       outb(reg++, REG);
+       outb(val >> 8, VAL);
+       outb(reg, REG);
+       outb(val, VAL);
+}
+
+/* watchdog timer handling */
+
+static void wdt_keepalive(void)
+{
+	if (test_bit(WDTS_USE_GP, &wdt_status))
+		inb(base);
+	else
+		/* The timer reloads with around 5 msec delay */
+		outb(0x55, CIR_DR(base));
+	set_bit(WDTS_KEEPALIVE, &wdt_status);
+}
+
+static void wdt_start(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spinlock, flags);
+	superio_enter();
+
+	superio_select(GPIO);
+	if (test_bit(WDTS_USE_GP, &wdt_status))
+		superio_outb(WDT_GAMEPORT, WDTCTRL);
+	else
+		superio_outb(WDT_CIRINT, WDTCTRL);
+	if (!testmode)
+		superio_outb(WDT_TOV1 | WDT_KRST | WDT_PWROK, WDTCFG);
+	else
+		superio_outb(WDT_TOV1, WDTCFG);
+	superio_outb(timeout>>8, WDTVALMSB);
+	superio_outb(timeout, WDTVALLSB);
+
+	superio_exit();
+	spin_unlock_irqrestore(&spinlock, flags);
+}
+
+static void wdt_stop(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spinlock, flags);
+	superio_enter();
+
+	superio_select(GPIO);
+	superio_outb(0x00, WDTCTRL);
+	superio_outb(WDT_TOV1, WDTCFG);
+	superio_outb(0x00, WDTVALMSB);
+	superio_outb(0x00, WDTVALLSB);
+
+	superio_exit();
+	spin_unlock_irqrestore(&spinlock, flags);
+}
+
+/**
+ *	wdt_set_timeout - set a new timeout value with watchdog ioctl
+ *	@t: timeout value in seconds
+ *
+ *	The hardware device has a 16 bit watchdog timer, thus the
+ *	timeout time ranges between 1 and 65535 seconds.
+ *
+ *	Used within WDIOC_SETTIMEOUT watchdog device ioctl.
+ */
+
+static int wdt_set_timeout(int t)
+{
+	unsigned long flags;
+
+	if (t < 1 || t > 65535)
+		return -EINVAL;
+
+	timeout = t;
+
+	spin_lock_irqsave(&spinlock, flags);
+	if (test_bit(WDTS_TIMER_RUN, &wdt_status)) {
+		superio_enter();
+
+		superio_select(GPIO);
+		superio_outb(t>>8, WDTVALMSB);
+		superio_outb(t, WDTVALLSB);
+
+		superio_exit();
+	}
+	spin_unlock_irqrestore(&spinlock, flags);
+	return 0;
+}
+
+/**
+ *	wdt_get_status - determines the status supported by watchdog ioctl
+ *	@status: status returned to user space
+ *
+ *	The status bit of the device does not allow to distinguish
+ *	between a regular system reset and a watchdog forced reset.
+ *	But, in test mode it is useful, so it is supported through
+ *	WDIOC_GETSTATUS watchdog ioctl. Additionally the driver
+ *	reports the keepalive signal and the acception of the magic.
+ *
+ *	Used within WDIOC_GETSTATUS watchdog device ioctl.
+ */
+
+static int wdt_get_status(int *status)
+{
+	unsigned long flags;
+
+	*status = 0;
+	if (testmode) {
+		spin_lock_irqsave(&spinlock, flags);
+		superio_enter();
+		superio_select(GPIO);
+		if (superio_inb(WDTCTRL) & WDT_ZERO) {
+			superio_outb(0x00, WDTCTRL);
+			clear_bit(WDTS_TIMER_RUN, &wdt_status);
+			*status |= WDIOF_CARDRESET;
+		}
+
+		superio_exit();
+		spin_unlock_irqrestore(&spinlock, flags);
+	}
+	if (test_and_clear_bit(WDTS_KEEPALIVE, &wdt_status))
+		*status |= WDIOF_KEEPALIVEPING;
+	if (test_bit(WDTS_EXPECTED, &wdt_status))
+		*status |= WDIOF_MAGICCLOSE;
+	return 0;
+}
+
+/* /dev/watchdog handling */
+
+/**
+ *	wdt_open - watchdog file_operations .open
+ *	@inode: inode of the device
+ *	@file: file handle to the device
+ *
+ *	The watchdog timer starts by opening the device.
+ *
+ *	Used within the file operation of the watchdog device.
+ */
+
+static int wdt_open(struct inode *inode, struct file *file)
+{
+	if (exclusive && test_and_set_bit(WDTS_DEV_OPEN, &wdt_status))
+		return -EBUSY;
+	if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) {
+		if (nowayout && !test_and_set_bit(WDTS_LOCKED, &wdt_status))
+			__module_get(THIS_MODULE);
+		wdt_start();
+	}
+	return nonseekable_open(inode, file);
+}
+
+/**
+ *	wdt_release - watchdog file_operations .release
+ *	@inode: inode of the device
+ *	@file: file handle to the device
+ *
+ *	Closing the watchdog device either stops the watchdog timer
+ *	or in the case, that nowayout is set or the magic character
+ *	wasn't written, a critical warning about an running watchdog
+ *	timer is given.
+ *
+ *	Used within the file operation of the watchdog device.
+ */
+
+static int wdt_release(struct inode *inode, struct file *file)
+{
+	if (test_bit(WDTS_TIMER_RUN, &wdt_status)) {
+		if (test_and_clear_bit(WDTS_EXPECTED, &wdt_status)) {
+			wdt_stop();
+			clear_bit(WDTS_TIMER_RUN, &wdt_status);
+		} else {
+			wdt_keepalive();
+			printk(KERN_CRIT PFX
+			       "unexpected close, not stopping watchdog!\n");
+		}
+	}
+	clear_bit(WDTS_DEV_OPEN, &wdt_status);
+	return 0;
+}
+
+/**
+ *	wdt_write - watchdog file_operations .write
+ *	@file: file handle to the watchdog
+ *	@buf: buffer to write
+ *	@count: count of bytes
+ *	@ppos: pointer to the position to write. No seeks allowed
+ *
+ *	A write to a watchdog device is defined as a keepalive signal. Any
+ *	write of data will do, as we don't define content meaning.
+ *
+ *	Used within the file operation of the watchdog device.
+ */
+
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+			    size_t count, loff_t *ppos)
+{
+	if (count) {
+		clear_bit(WDTS_EXPECTED, &wdt_status);
+		wdt_keepalive();
+	}
+	if (!nowayout) {
+		size_t ofs;
+
+	/* note: just in case someone wrote the magic character long ago */
+		for (ofs = 0; ofs != count; ofs++) {
+			char c;
+			if (get_user(c, buf + ofs))
+				return -EFAULT;
+			if (c == WD_MAGIC)
+				set_bit(WDTS_EXPECTED, &wdt_status);
+		}
+	}
+	return count;
+}
+
+static struct watchdog_info ident = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.firmware_version =	1,
+	.identity = WATCHDOG_NAME,
+};
+
+/**
+ *	wdt_ioctl - watchdog file_operations .unlocked_ioctl
+ *	@file: file handle to the device
+ *	@cmd: watchdog command
+ *	@arg: argument pointer
+ *
+ *	The watchdog API defines a common set of functions for all watchdogs
+ *	according to their available features.
+ *
+ *	Used within the file operation of the watchdog device.
+ */
+
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int rc = 0, status, new_options, new_timeout;
+	union {
+		struct watchdog_info __user *ident;
+		int __user *i;
+	} uarg;
+
+	uarg.i = (int __user *)arg;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(uarg.ident,
+				    &ident, sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+		wdt_get_status(&status);
+		return put_user(status, uarg.i);
+
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, uarg.i);
+
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(new_options, uarg.i))
+			return -EFAULT;
+
+		switch (new_options) {
+		case WDIOS_DISABLECARD:
+			if (test_bit(WDTS_TIMER_RUN, &wdt_status))
+				wdt_stop();
+			clear_bit(WDTS_TIMER_RUN, &wdt_status);
+			return 0;
+
+		case WDIOS_ENABLECARD:
+			if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status))
+				wdt_start();
+			return 0;
+
+		default:
+			return -EFAULT;
+		}
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, uarg.i))
+			return -EFAULT;
+		rc = wdt_set_timeout(new_timeout);
+	case WDIOC_GETTIMEOUT:
+		if (put_user(timeout, uarg.i))
+			return -EFAULT;
+		return rc;
+
+	default:
+		return -ENOTTY;
+	}
+}
+
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
+	void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_stop();
+	return NOTIFY_DONE;
+}
+
+static const struct file_operations wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= wdt_write,
+	.unlocked_ioctl	= wdt_ioctl,
+	.open		= wdt_open,
+	.release	= wdt_release,
+};
+
+static struct miscdevice wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &wdt_fops,
+};
+
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+
+static int __init it87_wdt_init(void)
+{
+	int rc = 0;
+	u16 chip_type;
+	u8  chip_rev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&spinlock, flags);
+	superio_enter();
+	chip_type = superio_inw(CHIPID);
+	chip_rev  = superio_inb(CHIPREV) & 0x0f;
+	superio_exit();
+	spin_unlock_irqrestore(&spinlock, flags);
+
+	switch (chip_type) {
+	case IT8716_ID:
+	case IT8718_ID:
+	case IT8726_ID:
+		break;
+	case IT8712_ID:
+		if (chip_rev > 7)
+			break;
+	case IT8705_ID:
+		printk(KERN_ERR PFX
+		       "Unsupported Chip found, Chip %04x Revision %02x\n",
+		       chip_type, chip_rev);
+		return -ENODEV;
+	case NO_DEV_ID:
+		printk(KERN_ERR PFX "no device\n");
+		return -ENODEV;
+	default:
+		printk(KERN_ERR PFX
+		       "Unknown Chip found, Chip %04x Revision %04x\n",
+		       chip_type, chip_rev);
+		return -ENODEV;
+	}
+
+	spin_lock_irqsave(&spinlock, flags);
+	superio_enter();
+
+	superio_select(GPIO);
+	superio_outb(WDT_TOV1, WDTCFG);
+	superio_outb(0x00, WDTCTRL);
+
+	/* First try to get Gameport support */
+	if (chip_type != IT8718_ID && !nogameport) {
+		superio_select(GAMEPORT);
+		base = superio_inw(BASEREG);
+		if (!base) {
+			base = GP_BASE_DEFAULT;
+			superio_outw(base, BASEREG);
+		}
+		gpact = superio_inb(ACTREG);
+		superio_outb(0x01, ACTREG);
+		superio_exit();
+		spin_unlock_irqrestore(&spinlock, flags);
+		if (request_region(base, 1, WATCHDOG_NAME))
+			set_bit(WDTS_USE_GP, &wdt_status);
+		else
+			rc = -EIO;
+	} else {
+		superio_exit();
+		spin_unlock_irqrestore(&spinlock, flags);
+	}
+
+	/* If we haven't Gameport support, try to get CIR support */
+	if (!test_bit(WDTS_USE_GP, &wdt_status)) {
+		if (!request_region(CIR_BASE, 8, WATCHDOG_NAME)) {
+			if (rc == -EIO)
+				printk(KERN_ERR PFX
+					"I/O Address 0x%04x and 0x%04x"
+					" already in use\n", base, CIR_BASE);
+			else
+				printk(KERN_ERR PFX
+					"I/O Address 0x%04x already in use\n",
+					CIR_BASE);
+			rc = -EIO;
+			goto err_out;
+		}
+		base = CIR_BASE;
+		spin_lock_irqsave(&spinlock, flags);
+		superio_enter();
+
+		superio_select(CIR);
+		superio_outw(base, BASEREG);
+		superio_outb(0x00, CIR_ILS);
+		ciract = superio_inb(ACTREG);
+		superio_outb(0x01, ACTREG);
+		if (rc == -EIO) {
+			superio_select(GAMEPORT);
+			superio_outb(gpact, ACTREG);
+		}
+
+		superio_exit();
+		spin_unlock_irqrestore(&spinlock, flags);
+	}
+
+	if (timeout < 1 || timeout > 65535) {
+		timeout = DEFAULT_TIMEOUT;
+		printk(KERN_WARNING PFX
+		       "Timeout value out of range, use default %d sec\n",
+		       DEFAULT_TIMEOUT);
+	}
+
+	rc = register_reboot_notifier(&wdt_notifier);
+	if (rc) {
+		printk(KERN_ERR PFX
+		       "Cannot register reboot notifier (err=%d)\n", rc);
+		goto err_out_region;
+	}
+
+	rc = misc_register(&wdt_miscdev);
+	if (rc) {
+		printk(KERN_ERR PFX
+		       "Cannot register miscdev on minor=%d (err=%d)\n",
+			wdt_miscdev.minor, rc);
+		goto err_out_reboot;
+	}
+
+	/* Initialize CIR to use it as keepalive source */
+	if (!test_bit(WDTS_USE_GP, &wdt_status)) {
+		outb(0x00, CIR_RCR(base));
+		outb(0xc0, CIR_TCR1(base));
+		outb(0x5c, CIR_TCR2(base));
+		outb(0x10, CIR_IER(base));
+		outb(0x00, CIR_BDHR(base));
+		outb(0x01, CIR_BDLR(base));
+		outb(0x09, CIR_IER(base));
+	}
+
+	printk(KERN_INFO PFX "Chip it%04x revision %d initialized. "
+		"timeout=%d sec (nowayout=%d testmode=%d exclusive=%d "
+		"nogameport=%d)\n", chip_type, chip_rev, timeout,
+		nowayout, testmode, exclusive, nogameport);
+
+	return 0;
+
+err_out_reboot:
+	unregister_reboot_notifier(&wdt_notifier);
+err_out_region:
+	release_region(base, test_bit(WDTS_USE_GP, &wdt_status) ? 1 : 8);
+	if (!test_bit(WDTS_USE_GP, &wdt_status)) {
+		spin_lock_irqsave(&spinlock, flags);
+		superio_enter();
+		superio_select(CIR);
+		superio_outb(ciract, ACTREG);
+		superio_exit();
+		spin_unlock_irqrestore(&spinlock, flags);
+	}
+err_out:
+	if (chip_type != IT8718_ID && !nogameport) {
+		spin_lock_irqsave(&spinlock, flags);