Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6

* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings

61 files changed, 108 insertions, 108 deletions

diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index b268e9fccb47..e71521ce3010 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1283,7 +1283,7 @@ static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate)
 
 	/* in bulk mode the modem have problem with high rate
 	 * changing internal timing could improve things, but the
-	 * value is misterious.
+	 * value is mysterious.
 	 * ADI930 don't support it (-EPIPE error).
 	 */
 
@@ -1743,7 +1743,7 @@ static int uea_send_cmvs_e1(struct uea_softc *sc)
 				goto out;
 		}
 	} else {
-		/* This realy should not happen */
+		/* This really should not happen */
 		uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
 		goto out;
 	}
@@ -1798,7 +1798,7 @@ static int uea_send_cmvs_e4(struct uea_softc *sc)
 				goto out;
 		}
 	} else {
-		/* This realy should not happen */
+		/* This really should not happen */
 		uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
 		goto out;
 	}
@@ -1829,7 +1829,7 @@ static int uea_start_reset(struct uea_softc *sc)
 
 	/* mask interrupt */
 	sc->booting = 1;
-	/* We need to set this here because, a ack timeout could have occured,
+	/* We need to set this here because, a ack timeout could have occurred,
 	 * but before we start the reboot, the ack occurs and set this to 1.
 	 * So we will failed to wait Ready CMV.
 	 */
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
index b6d49234e521..62050f7a4f97 100644
--- a/drivers/usb/c67x00/c67x00-drv.c
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -27,7 +27,7 @@
  * the link between the common hardware parts and the subdrivers (e.g.
  * interrupt handling).
  *
- * The c67x00 has 2 SIE's (serial interface engine) wich can be configured
+ * The c67x00 has 2 SIE's (serial interface engine) which can be configured
  * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG).
  *
  * Depending on the platform configuration, the SIE's are created and
diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h
index 74e44621e313..e3d493d4d61a 100644
--- a/drivers/usb/c67x00/c67x00-hcd.h
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@@ -34,7 +34,7 @@
 /*
  * The following parameters depend on the CPU speed, bus speed, ...
  * These can be tuned for specific use cases, e.g. if isochronous transfers
- * are very important, bandwith can be sacrificed to guarantee that the
+ * are very important, bandwidth can be sacrificed to guarantee that the
  * 1ms deadline will be met.
  * If bulk transfers are important, the MAX_FRAME_BW can be increased,
  * but some (or many) isochronous deadlines might not be met.
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
index f6b3c253f3fa..a03fbc15fa9c 100644
--- a/drivers/usb/c67x00/c67x00-sched.c
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -907,7 +907,7 @@ static inline int c67x00_end_of_data(struct c67x00_td *td)
 
 /* Remove all td's from the list which come
  * after last_td and are meant for the same pipe.
- * This is used when a short packet has occured */
+ * This is used when a short packet has occurred */
 static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00,
 				     struct c67x00_td *last_td)
 {
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 5eeb570b9a61..b4ea54dbf323 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -52,7 +52,7 @@
  */
 
 /*
- * The only reason to have several buffers is to accomodate assumptions
+ * The only reason to have several buffers is to accommodate assumptions
  * in line disciplines. They ask for empty space amount, receive our URB size,
  * and proceed to issue several 1-character writes, assuming they will fit.
  * The very first write takes a complete URB. Fortunately, this only happens
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 6a54634ab823..385acb895ab3 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -483,7 +483,7 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
 		}
 
 		done += n_characters;
-		/* Terminate if end-of-message bit recieved from device */
+		/* Terminate if end-of-message bit received from device */
 		if ((buffer[8] &  0x01) && (actual >= n_characters + 12))
 			remaining = 0;
 		else
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 02b4dbfa488a..8eed05d23838 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -700,7 +700,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
 	/* The USB 2.0 spec says 256 ms.  This is close enough and won't
 	 * exceed that limit if HZ is 100. The math is more clunky than
 	 * maybe expected, this is to make sure that all timers for USB devices
-	 * fire at the same time to give the CPU a break inbetween */
+	 * fire at the same time to give the CPU a break in between */
 	if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
 			(length == 0 && hcd->status_urb != NULL))
 		mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 564eaa5525d7..8fb754916c67 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1649,7 +1649,7 @@ void usb_disconnect(struct usb_device **pdev)
 
 	/* mark the device as inactive, so any further urb submissions for
 	 * this device (and any of its children) will fail immediately.
-	 * this quiesces everyting except pending urbs.
+	 * this quiesces everything except pending urbs.
 	 */
 	usb_set_device_state(udev, USB_STATE_NOTATTACHED);
 	dev_info(&udev->dev, "USB disconnect, device number %d\n",
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index 0bc06e2bcfcb..a6a350f5827b 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -648,7 +648,7 @@ static int ehci_reset_port(int port)
 		if (!(portsc & PORT_CONNECT))
 			return -ENOTCONN;
 
-		/* bomb out completely if something weird happend */
+		/* bomb out completely if something weird happened */
 		if ((portsc & PORT_CSC))
 			return -EINVAL;
 
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index f8dd7269d79c..6e42aab75806 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -278,7 +278,7 @@ static int udc_enable_dev_setup_interrupts(struct udc *dev)
 	return 0;
 }
 
-/* Calculates fifo start of endpoint based on preceeding endpoints */
+/* Calculates fifo start of endpoint based on preceding endpoints */
 static int udc_set_txfifo_addr(struct udc_ep *ep)
 {
 	struct udc	*dev;
@@ -2137,7 +2137,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
 	if (use_dma) {
 		/* BNA event ? */
 		if (tmp & AMD_BIT(UDC_EPSTS_BNA)) {
-			DBG(dev, "BNA ep%dout occured - DESPTR = %x \n",
+			DBG(dev, "BNA ep%dout occurred - DESPTR = %x \n",
 					ep->num, readl(&ep->regs->desptr));
 			/* clear BNA */
 			writel(tmp | AMD_BIT(UDC_EPSTS_BNA), &ep->regs->sts);
@@ -2151,7 +2151,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
 	}
 	/* HE event ? */
 	if (tmp & AMD_BIT(UDC_EPSTS_HE)) {
-		dev_err(&dev->pdev->dev, "HE ep%dout occured\n", ep->num);
+		dev_err(&dev->pdev->dev, "HE ep%dout occurred\n", ep->num);
 
 		/* clear HE */
 		writel(tmp | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts);
@@ -2354,7 +2354,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 		/* BNA ? */
 		if (epsts & AMD_BIT(UDC_EPSTS_BNA)) {
 			dev_err(&dev->pdev->dev,
-				"BNA ep%din occured - DESPTR = %08lx \n",
+				"BNA ep%din occurred - DESPTR = %08lx \n",
 				ep->num,
 				(unsigned long) readl(&ep->regs->desptr));
 
@@ -2367,7 +2367,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 	/* HE event ? */
 	if (epsts & AMD_BIT(UDC_EPSTS_HE)) {
 		dev_err(&dev->pdev->dev,
-			"HE ep%dn occured - DESPTR = %08lx \n",
+			"HE ep%dn occurred - DESPTR = %08lx \n",
 			ep->num, (unsigned long) readl(&ep->regs->desptr));
 
 		/* clear HE */
@@ -2384,7 +2384,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 			req = list_entry(ep->queue.next,
 					struct udc_request, queue);
 			/*
-			 * length bytes transfered
+			 * length bytes transferred
 			 * check dma done of last desc. in PPBDU mode
 			 */
 			if (use_dma_ppb_du) {
@@ -2784,7 +2784,7 @@ static irqreturn_t udc_control_in_isr(struct udc *dev)
 					/* write fifo */
 					udc_txfifo_write(ep, &req->req);
 
-					/* lengh bytes transfered */
+					/* lengh bytes transferred */
 					len = req->req.length - req->req.actual;
 					if (len > ep->ep.maxpacket)
 						len = ep->ep.maxpacket;
diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h
index 4bbabbbfc93f..1d1c7543468e 100644
--- a/drivers/usb/gadget/amd5536udc.h
+++ b/drivers/usb/gadget/amd5536udc.h
@@ -584,7 +584,7 @@ union udc_setup_data {
  * SET and GET bitfields in u32 values
  * via constants for mask/offset:
  * <bit_field_stub_name> is the text between
- * UDC_ and _MASK|_OFS of appropiate
+ * UDC_ and _MASK|_OFS of appropriate
  * constant
  *
  * set bitfield value in u32 u32Val
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index bb8ddf0469f9..9b7cdb16f26b 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -826,7 +826,7 @@ done:
 	return status;
 }
 
-/* reinit == restore inital software state */
+/* reinit == restore initial software state */
 static void udc_reinit(struct at91_udc *udc)
 {
 	u32 i;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index c2251c40a205..82314ed22506 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -42,7 +42,7 @@
 static struct usb_composite_driver *composite;
 static int (*composite_gadget_bind)(struct usb_composite_dev *cdev);
 
-/* Some systems will need runtime overrides for the  product identifers
+/* Some systems will need runtime overrides for the  product identifiers
  * published in the device descriptor, either numbers or strings or both.
  * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
@@ -205,14 +205,14 @@ int usb_function_activate(struct usb_function *function)
  * usb_interface_id() is called from usb_function.bind() callbacks to
  * allocate new interface IDs.  The function driver will then store that
  * ID in interface, association, CDC union, and other descriptors.  It
- * will also handle any control requests targetted at that interface,
+ * will also handle any control requests targeted at that interface,
  * particularly changing its altsetting via set_alt().  There may
  * also be class-specific or vendor-specific requests to handle.
  *
  * All interface identifier should be allocated using this routine, to
  * ensure that for example different functions don't wrongly assign
  * different meanings to the same identifier.  Note that since interface
- * identifers are configuration-specific, functions used in more than
+ * identifiers are configuration-specific, functions used in more than
  * one configuration (or more than once in a given configuration) need
  * multiple versions of the relevant descriptors.
  *
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 00975ed903d1..9abecfddb27d 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -742,7 +742,7 @@ int __init control_selector_init(struct f_audio *audio)
 }
 
 /**
- * audio_bind_config - add USB audio fucntion to a configuration
+ * audio_bind_config - add USB audio function to a configuration
  * @c: the configuration to supcard the USB audio function
  * Context: single threaded during gadget setup
  *
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index 130eee678c8b..86902a60bcdb 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -111,7 +111,7 @@ static inline unsigned ncm_bitrate(struct usb_gadget *g)
 #define NTB_OUT_SIZE		16384
 
 /*
- * skbs of size less than that will not be alligned
+ * skbs of size less than that will not be aligned
  * to NCM's dwNtbInMaxSize to save bus bandwidth
  */
 
diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h
index bea5b827bebe..e35e24fd64bb 100644
--- a/drivers/usb/gadget/fsl_qe_udc.h
+++ b/drivers/usb/gadget/fsl_qe_udc.h
@@ -208,14 +208,14 @@ struct qe_frame{
 /* Frame status field */
 /* Receive side */
 #define FRAME_OK               0x00000000 /* Frame tranmitted or received OK */
-#define FRAME_ERROR            0x80000000 /* Error occured on frame */
+#define FRAME_ERROR            0x80000000 /* Error occurred on frame */
 #define START_FRAME_LOST       0x40000000 /* START_FRAME_LOST */
 #define END_FRAME_LOST         0x20000000 /* END_FRAME_LOST */
 #define RX_ER_NONOCT           0x10000000 /* Rx Non Octet Aligned Packet */
 #define RX_ER_BITSTUFF         0x08000000 /* Frame Aborted --Received packet
 					     with bit stuff error */
 #define RX_ER_CRC              0x04000000 /* Received packet with CRC error */
-#define RX_ER_OVERUN           0x02000000 /* Over-run occured on reception */
+#define RX_ER_OVERUN           0x02000000 /* Over-run occurred on reception */
 #define RX_ER_PID              0x01000000 /* Wrong PID received */
 /* Tranmit side */
 #define TX_ER_NAK              0x00800000 /* Received NAK handshake */
@@ -379,7 +379,7 @@ struct qe_udc {
 #define T_LSP         0x01000000         /* Low-speed transaction */
 #define T_PID         0x00c00000         /* packet id */
 #define T_NAK         0x00100000         /* No ack. */
-#define T_STAL        0x00080000         /* Stall recieved */
+#define T_STAL        0x00080000         /* Stall received */
 #define T_TO          0x00040000         /* time out */
 #define T_UN          0x00020000         /* underrun */
 
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 912cb8e63fe3..07499c1cdcc4 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -464,7 +464,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 
 	max = le16_to_cpu(desc->wMaxPacketSize);
 
-	/* Disable automatic zlp generation.  Driver is reponsible to indicate
+	/* Disable automatic zlp generation.  Driver is responsible to indicate
 	 * explicitly through req->req.zero.  This is needed to enable multi-td
 	 * request. */
 	zlt = 1;
@@ -648,7 +648,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
 			| EP_QUEUE_HEAD_STATUS_HALT));
 	dQH->size_ioc_int_sts &= temp;
 
-	/* Ensure that updates to the QH will occure before priming. */
+	/* Ensure that updates to the QH will occur before priming. */
 	wmb();
 
 	/* Prime endpoint by writing 1 to ENDPTPRIME */
@@ -1459,7 +1459,7 @@ static int process_ep_req(struct fsl_udc *udc, int pipe,
 				status = -EILSEQ;
 				break;
 			} else
-				ERR("Unknown error has occured (0x%x)!\n",
+				ERR("Unknown error has occurred (0x%x)!\n",
 					errors);
 
 		} else if (le32_to_cpu(curr_td->size_ioc_sts)
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index 20aeceed48c7..e88cce5c2c0d 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -15,7 +15,7 @@ struct usb_dr_device {
 	u8 res1[256];
 	u16 caplength;		/* Capability Register Length */
 	u16 hciversion;		/* Host Controller Interface Version */
-	u32 hcsparams;		/* Host Controller Structual Parameters */
+	u32 hcsparams;		/* Host Controller Structural Parameters */
 	u32 hccparams;		/* Host Controller Capability Parameters */
 	u8 res2[20];
 	u32 dciversion;		/* Device Controller Interface Version */
@@ -52,7 +52,7 @@ struct usb_dr_host {
 	u8 res1[256];
 	u16 caplength;		/* Capability Register Length */
 	u16 hciversion;		/* Host Controller Interface Version */
-	u32 hcsparams;		/* Host Controller Structual Parameters */
+	u32 hcsparams;		/* Host Controller Structural Parameters */
 	u32 hccparams;		/* Host Controller Capability Parameters */
 	u8 res2[20];
 	u32 dciversion;		/* Device Controller Interface Version */
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 0ab7e141d494..47b86b99d449 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -67,7 +67,7 @@ MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter.");
 module_param(id, charp, 0444);
 MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter.");
 
-/* Some systems will want different product identifers published in the
+/* Some systems will want different product identifiers published in the
  * device descriptor, either numbers or strings or both.  These string
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 1eca8b47ce3c..9cee88a43a73 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -642,7 +642,7 @@ static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
 	dqh->dtd_status &= dtd_status;
 	dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
 
-	/* ensure that updates to the dQH will occure before priming */
+	/* ensure that updates to the dQH will occur before priming */
 	wmb();
 
 	/* write 1 to endptprime register to PRIME endpoint */
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index d5468a7f38e0..b62b2640deb0 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -325,7 +325,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 
 			/*
 			 * Ensure that updates to the QH will
-			 * occure before priming.
+			 * occur before priming.
 			 */
 			wmb();
 
@@ -338,7 +338,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 			& EP_QUEUE_HEAD_NEXT_POINTER_MASK;;
 		dqh->size_ioc_int_sts = 0;
 
-		/* Ensure that updates to the QH will occure before priming. */
+		/* Ensure that updates to the QH will occur before priming. */
 		wmb();
 
 		/* Prime the Endpoint */
@@ -1845,7 +1845,7 @@ static irqreturn_t mv_udc_irq(int irq, void *dev)
 		return IRQ_NONE;
 	}
 
-	/* Clear all the interrupts occured */
+	/* Clear all the interrupts occurred */
 	writel(status, &udc->op_regs->usbsts);
 
 	if (status & USBSTS_ERR)
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index d09155b25d73..24696f7fa6a9 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -117,7 +117,7 @@ module_param (fifo_mode, ushort, 0644);
 
 /* enable_suspend -- When enabled, the driver will respond to
  * USB suspend requests by powering down the NET2280.  Otherwise,
- * USB suspend requests will be ignored.  This is acceptible for
+ * USB suspend requests will be ignored.  This is acceptable for
  * self-powered devices
  */
 static int enable_suspend = 0;
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index b5364f9d7cd2..55ca63ad3506 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -203,7 +203,7 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
 		goto err_usb;
 	}
 
-	/* finaly register the configuration */
+	/* finally register the configuration */
 	status = usb_add_config(cdev, &nokia_config_500ma_driver,
 			nokia_bind_config);
 	if (status < 0)
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 12ff6cffedc9..c3f2bd42bd5a 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -126,7 +126,7 @@ static struct printer_dev usb_printer_gadget;
 #define PRINTER_VENDOR_NUM	0x0525		/* NetChip */
 #define PRINTER_PRODUCT_NUM	0xa4a8		/* Linux-USB Printer Gad