Merge tag 'usb-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.11 merge window

All function drivers are now converted to our new configfs-based
binding. Eventually this will help us getting rid of in-kernel
gadget drivers and only keep function drivers in the kernel.

MUSB was taught that it needs to be built for host-only and
device-only modes too. We had this support long ago but it
involved a ridiculous amount of ifdefs. Now we have a much
cleaner approach.

Samsung Exynos4 platform now implements HSIC support.

We're introducing support for AB8540 and AB9540 PHYs.

MUSB module reinsertion now works as expected, before we were
getting -EBUSY being returned by the resource checks done on
driver core.

DWC3 now has minimum support for TI's AM437x series of SoCs.

OMAP5 USB3 PHY learned one extra DPLL configuration values because
that PHY is reused in TI's DRA7xx devices.

We're introducing support for Faraday fotg210 UDCs.

Last, but not least, the usual set of non-critical fixes and cleanups
ranging from usage of platform_{get,set}_drvdata to lock improvements.

Signed-of-by: Felipe Balbi <balbi@ti.com>

1 files changed, 81 insertions, 15 deletions

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 4211e5540945..a9695f5a92fb 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -46,7 +46,6 @@
 #include "musb_core.h"
 #include "musb_host.h"
 
-
 /* MUSB HOST status 22-mar-2006
  *
  * - There's still lots of partial code duplication for fault paths, so
@@ -96,6 +95,11 @@
  * of transfers between endpoints, or anything clever.
  */
 
+struct musb *hcd_to_musb(struct usb_hcd *hcd)
+{
+	return *(struct musb **) hcd->hcd_priv;
+}
+
 
 static void musb_ep_program(struct musb *musb, u8 epnum,
 			struct urb *urb, int is_out,
@@ -310,9 +314,9 @@ __acquires(musb->lock)
 			urb->actual_length, urb->transfer_buffer_length
 			);
 
-	usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb);
+	usb_hcd_unlink_urb_from_ep(musb->hcd, urb);
 	spin_unlock(&musb->lock);
-	usb_hcd_giveback_urb(musb_to_hcd(musb), urb, status);
+	usb_hcd_giveback_urb(musb->hcd, urb, status);
 	spin_lock(&musb->lock);
 }
 
@@ -624,7 +628,7 @@ static bool musb_tx_dma_program(struct dma_controller *dma,
 	u16			csr;
 	u8			mode;
 
-#ifdef	CONFIG_USB_INVENTRA_DMA
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
 	if (length > channel->max_len)
 		length = channel->max_len;
 
@@ -1454,7 +1458,7 @@ done:
 	if (length > qh->maxpacket)
 		length = qh->maxpacket;
 	/* Unmap the buffer so that CPU can use it */
-	usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb);
+	usb_hcd_unmap_urb_for_dma(musb->hcd, urb);
 
 	/*
 	 * We need to map sg if the transfer_buffer is
@@ -1656,7 +1660,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 
 	/* FIXME this is _way_ too much in-line logic for Mentor DMA */
 
-#ifndef CONFIG_USB_INVENTRA_DMA
+#if !defined(CONFIG_USB_INVENTRA_DMA) && !defined(CONFIG_USB_UX500_DMA)
 	if (rx_csr & MUSB_RXCSR_H_REQPKT)  {
 		/* REVISIT this happened for a while on some short reads...
 		 * the cleanup still needs investigation... looks bad...
@@ -1688,7 +1692,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 			| MUSB_RXCSR_RXPKTRDY);
 		musb_writew(hw_ep->regs, MUSB_RXCSR, val);
 
-#ifdef CONFIG_USB_INVENTRA_DMA
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
 		if (usb_pipeisoc(pipe)) {
 			struct usb_iso_packet_descriptor *d;
 
@@ -1744,7 +1748,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 		}
 
 		/* we are expecting IN packets */
-#ifdef CONFIG_USB_INVENTRA_DMA
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
 		if (dma) {
 			struct dma_controller	*c;
 			u16			rx_count;
@@ -1753,10 +1757,10 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 
 			rx_count = musb_readw(epio, MUSB_RXCOUNT);
 
-			dev_dbg(musb->controller, "RX%d count %d, buffer 0x%x len %d/%d\n",
+			dev_dbg(musb->controller, "RX%d count %d, buffer 0x%llx len %d/%d\n",
 					epnum, rx_count,
-					urb->transfer_dma
-						+ urb->actual_length,
+					(unsigned long long) urb->transfer_dma
+					+ urb->actual_length,
 					qh->offset,
 					urb->transfer_buffer_length);
 
@@ -1868,7 +1872,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 			unsigned int received_len;
 
 			/* Unmap the buffer so that CPU can use it */
-			usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb);
+			usb_hcd_unmap_urb_for_dma(musb->hcd, urb);
 
 			/*
 			 * We need to map sg if the transfer_buffer is
@@ -2462,7 +2466,6 @@ static int musb_bus_resume(struct usb_hcd *hcd)
 	return 0;
 }
 
-
 #ifndef CONFIG_MUSB_PIO_ONLY
 
 #define MUSB_USB_DMA_ALIGN 4
@@ -2574,10 +2577,10 @@ static void musb_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
 }
 #endif /* !CONFIG_MUSB_PIO_ONLY */
 
-const struct hc_driver musb_hc_driver = {
+static const struct hc_driver musb_hc_driver = {
 	.description		= "musb-hcd",
 	.product_desc		= "MUSB HDRC host driver",
-	.hcd_priv_size		= sizeof(struct musb),
+	.hcd_priv_size		= sizeof(struct musb *),
 	.flags			= HCD_USB2 | HCD_MEMORY,
 
 	/* not using irq handler or reset hooks from usbcore, since
@@ -2605,3 +2608,66 @@ const struct hc_driver musb_hc_driver = {
 	/* .start_port_reset	= NULL, */
 	/* .hub_irq_enable	= NULL, */
 };
+
+int musb_host_alloc(struct musb *musb)
+{
+	struct device	*dev = musb->controller;
+
+	/* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
+	musb->hcd = usb_create_hcd(&musb_hc_driver, dev, dev_name(dev));
+	if (!musb->hcd)
+		return -EINVAL;
+
+	*musb->hcd->hcd_priv = (unsigned long) musb;
+	musb->hcd->self.uses_pio_for_control = 1;
+	musb->hcd->uses_new_polling = 1;
+	musb->hcd->has_tt = 1;
+
+	return 0;
+}
+
+void musb_host_cleanup(struct musb *musb)
+{
+	usb_remove_hcd(musb->hcd);
+	musb->hcd = NULL;
+}
+
+void musb_host_free(struct musb *musb)
+{
+	usb_put_hcd(musb->hcd);
+}
+
+int musb_host_setup(struct musb *musb, int power_budget)
+{
+	int ret;
+	struct usb_hcd *hcd = musb->hcd;
+
+	MUSB_HST_MODE(musb);
+	musb->xceiv->otg->default_a = 1;
+	musb->xceiv->state = OTG_STATE_A_IDLE;
+
+	otg_set_host(musb->xceiv->otg, &hcd->self);
+	hcd->self.otg_port = 1;
+	musb->xceiv->otg->host = &hcd->self;
+	hcd->power_budget = 2 * (power_budget ? : 250);
+
+	ret = usb_add_hcd(hcd, 0, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+void musb_host_resume_root_hub(struct musb *musb)
+{
+	usb_hcd_resume_root_hub(musb->hcd);
+}
+
+void musb_host_poke_root_hub(struct musb *musb)
+{
+	MUSB_HST_MODE(musb);
+	if (musb->hcd->status_urb)
+		usb_hcd_poll_rh_status(musb->hcd);
+	else
+		usb_hcd_resume_root_hub(musb->hcd);
+}