usb: musb: Fix PM for hub disconnect

With a USB hub disconnected, devctl can be 0x19 for about a second
on am335x and will stay forever on at least omap3. And we get no
further interrupts when devctl session bit clears. This keeps
PM runtime active.

Let's fix the issue by polling devctl until the session bit clears
or times out. We can do this by making musb->irq_work into
delayed_work.

And with the polling implemented, we can now also have the quirk
for invalid VBUS it to avoid disconnecting too early while VBUS
is ramping up.

Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime
PM for musb-core")
Fixes: 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPS
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 19 insertions, 10 deletions

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 384de6cd26f5..c3e172e15ec3 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -986,7 +986,7 @@ b_host:
 	}
 #endif
 
-	schedule_work(&musb->irq_work);
+	schedule_delayed_work(&musb->irq_work, 0);
 
 	return handled;
 }
@@ -1855,14 +1855,23 @@ static void musb_pm_runtime_check_session(struct musb *musb)
 		MUSB_DEVCTL_HR;
 	switch (devctl & ~s) {
 	case MUSB_QUIRK_B_INVALID_VBUS_91:
-		if (!musb->session && !musb->quirk_invalid_vbus) {
-			musb->quirk_invalid_vbus = true;
+		if (musb->quirk_retries--) {
 			musb_dbg(musb,
-				 "First invalid vbus, assume no session");
+				 "Poll devctl on invalid vbus, assume no session");
+			schedule_delayed_work(&musb->irq_work,
+					      msecs_to_jiffies(1000));
+
 			return;
 		}
-		break;
 	case MUSB_QUIRK_A_DISCONNECT_19:
+		if (musb->quirk_retries--) {
+			musb_dbg(musb,
+				 "Poll devctl on possible host mode disconnect");
+			schedule_delayed_work(&musb->irq_work,
+					      msecs_to_jiffies(1000));
+
+			return;
+		}
 		if (!musb->session)
 			break;
 		musb_dbg(musb, "Allow PM on possible host mode disconnect");
@@ -1886,9 +1895,9 @@ static void musb_pm_runtime_check_session(struct musb *musb)
 		if (error < 0)
 			dev_err(musb->controller, "Could not enable: %i\n",
 				error);
+		musb->quirk_retries = 3;
 	} else {
 		musb_dbg(musb, "Allow PM with no session: %02x", devctl);
-		musb->quirk_invalid_vbus = false;
 		pm_runtime_mark_last_busy(musb->controller);
 		pm_runtime_put_autosuspend(musb->controller);
 	}
@@ -1899,7 +1908,7 @@ static void musb_pm_runtime_check_session(struct musb *musb)
 /* Only used to provide driver mode change events */
 static void musb_irq_work(struct work_struct *data)
 {
-	struct musb *musb = container_of(data, struct musb, irq_work);
+	struct musb *musb = container_of(data, struct musb, irq_work.work);
 
 	musb_pm_runtime_check_session(musb);
 
@@ -2288,7 +2297,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	musb_generic_disable(musb);
 
 	/* Init IRQ workqueue before request_irq */
-	INIT_WORK(&musb->irq_work, musb_irq_work);
+	INIT_DELAYED_WORK(&musb->irq_work, musb_irq_work);
 	INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
 	INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume);
 
@@ -2385,7 +2394,7 @@ fail4:
 	musb_host_cleanup(musb);
 
 fail3:
-	cancel_work_sync(&musb->irq_work);
+	cancel_delayed_work_sync(&musb->irq_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	if (musb->dma_controller)
@@ -2452,7 +2461,7 @@ static int musb_remove(struct platform_device *pdev)
 	 */
 	musb_exit_debugfs(musb);
 
-	cancel_work_sync(&musb->irq_work);
+	cancel_delayed_work_sync(&musb->irq_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	pm_runtime_get_sync(musb->controller);