diff options
author | Arnd Bergmann <arnd@arndb.de> | 2015-11-16 16:48:12 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2015-12-13 19:59:48 -0800 |
commit | d1b5c87fa8058a3f477ae05555916dd1cea934ad (patch) | |
tree | c9c11f6648b9a56b014ce630ac5ca33f73f834f2 /drivers/tty | |
parent | 3ac4ae4736d404c436edf3b2ecfd941368f9e247 (diff) |
serial: remove NWP serial support
The NWP serial driver is no longer needed, as the two users of
this hardware have migrated to a much faster generation hardware,
see https://en.wikipedia.org/wiki/QPACE2 for the replacement.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Krill <ben@codiert.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/serial/Kconfig | 19 | ||||
-rw-r--r-- | drivers/tty/serial/Makefile | 1 | ||||
-rw-r--r-- | drivers/tty/serial/nwpserial.c | 477 | ||||
-rw-r--r-- | drivers/tty/serial/of_serial.c | 14 |
4 files changed, 1 insertions, 510 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index f0bbedf61cae..643fc50bb741 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1099,7 +1099,7 @@ config SERIAL_NETX_CONSOLE config SERIAL_OF_PLATFORM tristate "Serial port on Open Firmware platform bus" depends on OF - depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL + depends on SERIAL_8250 help If you have a PowerPC based system that has serial ports on a platform specific bus, you should enable this option. @@ -1133,23 +1133,6 @@ config SERIAL_OMAP_CONSOLE your boot loader about how to pass options to the kernel at boot time.) -config SERIAL_OF_PLATFORM_NWPSERIAL - tristate "NWP serial port driver" - depends on PPC_DCR - select SERIAL_OF_PLATFORM - select SERIAL_CORE_CONSOLE - select SERIAL_CORE - help - This driver supports the cell network processor nwp serial - device. - -config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE - bool "Console on NWP serial port" - depends on SERIAL_OF_PLATFORM_NWPSERIAL=y - select SERIAL_CORE_CONSOLE - help - Support for Console on the NWP serial ports. - config SERIAL_LANTIQ bool "Lantiq serial driver" depends on LANTIQ diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 5ab41119b3dc..ee8893317433 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -64,7 +64,6 @@ obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_MSM) += msm_serial.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o -obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c deleted file mode 100644 index 5da7622e88c3..000000000000 --- a/drivers/tty/serial/nwpserial.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Serial Port driver for a NWP uart device - * - * Copyright (C) 2008 IBM Corp., Benjamin Krill <ben@codiert.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#include <linux/init.h> -#include <linux/export.h> -#include <linux/console.h> -#include <linux/serial.h> -#include <linux/serial_reg.h> -#include <linux/serial_core.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/irqreturn.h> -#include <linux/mutex.h> -#include <linux/of_platform.h> -#include <linux/of_device.h> -#include <linux/nwpserial.h> -#include <linux/delay.h> -#include <asm/prom.h> -#include <asm/dcr.h> - -#define NWPSERIAL_NR 2 - -#define NWPSERIAL_STATUS_RXVALID 0x1 -#define NWPSERIAL_STATUS_TXFULL 0x2 - -struct nwpserial_port { - struct uart_port port; - dcr_host_t dcr_host; - unsigned int ier; - unsigned int mcr; -}; - -static DEFINE_MUTEX(nwpserial_mutex); -static struct nwpserial_port nwpserial_ports[NWPSERIAL_NR]; - -static void wait_for_bits(struct nwpserial_port *up, int bits) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = dcr_read(up->dcr_host, UART_LSR); - - if (--tmout == 0) - break; - udelay(1); - } while ((status & bits) != bits); -} - -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE -static void nwpserial_console_putchar(struct uart_port *port, int c) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - /* check if tx buffer is full */ - wait_for_bits(up, UART_LSR_THRE); - dcr_write(up->dcr_host, UART_TX, c); - up->port.icount.tx++; -} - -static void -nwpserial_console_write(struct console *co, const char *s, unsigned int count) -{ - struct nwpserial_port *up = &nwpserial_ports[co->index]; - unsigned long flags; - int locked = 1; - - if (oops_in_progress) - locked = spin_trylock_irqsave(&up->port.lock, flags); - else - spin_lock_irqsave(&up->port.lock, flags); - - /* save and disable interrupt */ - up->ier = dcr_read(up->dcr_host, UART_IER); - dcr_write(up->dcr_host, UART_IER, up->ier & ~UART_IER_RDI); - - uart_console_write(&up->port, s, count, nwpserial_console_putchar); - - /* wait for transmitter to become empty */ - while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0) - cpu_relax(); - - /* restore interrupt state */ - dcr_write(up->dcr_host, UART_IER, up->ier); - - if (locked) - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static struct uart_driver nwpserial_reg; -static struct console nwpserial_console = { - .name = "ttySQ", - .write = nwpserial_console_write, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &nwpserial_reg, -}; -#define NWPSERIAL_CONSOLE (&nwpserial_console) -#else -#define NWPSERIAL_CONSOLE NULL -#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ - -/**************************************************************************/ - -static int nwpserial_request_port(struct uart_port *port) -{ - return 0; -} - -static void nwpserial_release_port(struct uart_port *port) -{ - /* N/A */ -} - -static void nwpserial_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_NWPSERIAL; -} - -static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) -{ - struct nwpserial_port *up = dev_id; - struct tty_port *port = &up->port.state->port; - irqreturn_t ret; - unsigned int iir; - unsigned char ch; - - spin_lock(&up->port.lock); - - /* check if the uart was the interrupt source. */ - iir = dcr_read(up->dcr_host, UART_IIR); - if (!iir) { - ret = IRQ_NONE; - goto out; - } - - do { - up->port.icount.rx++; - ch = dcr_read(up->dcr_host, UART_RX); - if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID) - tty_insert_flip_char(port, ch, TTY_NORMAL); - } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR); - - spin_unlock(&up->port.lock); - tty_flip_buffer_push(port); - spin_lock(&up->port.lock); - - ret = IRQ_HANDLED; - - /* clear interrupt */ - dcr_write(up->dcr_host, UART_IIR, 1); -out: - spin_unlock(&up->port.lock); - return ret; -} - -static int nwpserial_startup(struct uart_port *port) -{ - struct nwpserial_port *up; - int err; - - up = container_of(port, struct nwpserial_port, port); - - /* disable flow control by default */ - up->mcr = dcr_read(up->dcr_host, UART_MCR) & ~UART_MCR_AFE; - dcr_write(up->dcr_host, UART_MCR, up->mcr); - - /* register interrupt handler */ - err = request_irq(up->port.irq, nwpserial_interrupt, - IRQF_SHARED, "nwpserial", up); - if (err) - return err; - - /* enable interrupts */ - up->ier = UART_IER_RDI; - dcr_write(up->dcr_host, UART_IER, up->ier); - - /* enable receiving */ - up->port.ignore_status_mask &= ~NWPSERIAL_STATUS_RXVALID; - - return 0; -} - -static void nwpserial_shutdown(struct uart_port *port) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - - /* disable receiving */ - up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; - - /* disable interrupts from this port */ - up->ier = 0; - dcr_write(up->dcr_host, UART_IER, up->ier); - - /* free irq */ - free_irq(up->port.irq, up); -} - -static int nwpserial_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - return -EINVAL; -} - -static const char *nwpserial_type(struct uart_port *port) -{ - return port->type == PORT_NWPSERIAL ? "nwpserial" : NULL; -} - -static void nwpserial_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - - up->port.read_status_mask = NWPSERIAL_STATUS_RXVALID - | NWPSERIAL_STATUS_TXFULL; - - up->port.ignore_status_mask = 0; - /* ignore all characters if CREAD is not set */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; - - /* Copy back the old hardware settings */ - if (old) - tty_termios_copy_hw(termios, old); -} - -static void nwpserial_break_ctl(struct uart_port *port, int ctl) -{ - /* N/A */ -} - -static void nwpserial_stop_rx(struct uart_port *port) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - /* don't forward any more data (like !CREAD) */ - up->port.ignore_status_mask = NWPSERIAL_STATUS_RXVALID; -} - -static void nwpserial_putchar(struct nwpserial_port *up, unsigned char c) -{ - /* check if tx buffer is full */ - wait_for_bits(up, UART_LSR_THRE); - dcr_write(up->dcr_host, UART_TX, c); - up->port.icount.tx++; -} - -static void nwpserial_start_tx(struct uart_port *port) -{ - struct nwpserial_port *up; - struct circ_buf *xmit; - up = container_of(port, struct nwpserial_port, port); - xmit = &up->port.state->xmit; - - if (port->x_char) { - nwpserial_putchar(up, up->port.x_char); - port->x_char = 0; - } - - while (!(uart_circ_empty(xmit) || uart_tx_stopped(&up->port))) { - nwpserial_putchar(up, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); - } -} - -static unsigned int nwpserial_get_mctrl(struct uart_port *port) -{ - return 0; -} - -static void nwpserial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* N/A */ -} - -static void nwpserial_stop_tx(struct uart_port *port) -{ - /* N/A */ -} - -static unsigned int nwpserial_tx_empty(struct uart_port *port) -{ - struct nwpserial_port *up; - unsigned long flags; - int ret; - up = container_of(port, struct nwpserial_port, port); - - spin_lock_irqsave(&up->port.lock, flags); - ret = dcr_read(up->dcr_host, UART_LSR); - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret & UART_LSR_TEMT ? TIOCSER_TEMT : 0; -} - -static struct uart_ops nwpserial_pops = { - .tx_empty = nwpserial_tx_empty, - .set_mctrl = nwpserial_set_mctrl, - .get_mctrl = nwpserial_get_mctrl, - .stop_tx = nwpserial_stop_tx, - .start_tx = nwpserial_start_tx, - .stop_rx = nwpserial_stop_rx, - .break_ctl = nwpserial_break_ctl, - .startup = nwpserial_startup, - .shutdown = nwpserial_shutdown, - .set_termios = nwpserial_set_termios, - .type = nwpserial_type, - .release_port = nwpserial_release_port, - .request_port = nwpserial_request_port, - .config_port = nwpserial_config_port, - .verify_port = nwpserial_verify_port, -}; - -static struct uart_driver nwpserial_reg = { - .owner = THIS_MODULE, - .driver_name = "nwpserial", - .dev_name = "ttySQ", - .major = TTY_MAJOR, - .minor = 68, - .nr = NWPSERIAL_NR, - .cons = NWPSERIAL_CONSOLE, -}; - -int nwpserial_register_port(struct uart_port *port) -{ - struct nwpserial_port *up = NULL; - int ret = -1; - int i; - static int first = 1; - int dcr_len; - int dcr_base; - struct device_node *dn; - - mutex_lock(&nwpserial_mutex); - - dn = port->dev->of_node; - if (dn == NULL) - goto out; - - /* get dcr base. */ - dcr_base = dcr_resource_start(dn, 0); - - /* find matching entry */ - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.iobase == dcr_base) { - up = &nwpserial_ports[i]; - break; - } - - /* we didn't find a mtching entry, search for a free port */ - if (up == NULL) - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.type == PORT_UNKNOWN && - nwpserial_ports[i].port.iobase == 0) { - up = &nwpserial_ports[i]; - break; - } - - if (up == NULL) { - ret = -EBUSY; - goto out; - } - - if (first) - uart_register_driver(&nwpserial_reg); - first = 0; - - up->port.membase = port->membase; - up->port.irq = port->irq; - up->port.uartclk = port->uartclk; - up->port.fifosize = port->fifosize; - up->port.regshift = port->regshift; - up->port.iotype = port->iotype; - up->port.flags = port->flags; - up->port.mapbase = port->mapbase; - up->port.private_data = port->private_data; - - if (port->dev) - up->port.dev = port->dev; - - if (up->port.iobase != dcr_base) { - up->port.ops = &nwpserial_pops; - up->port.fifosize = 16; - - spin_lock_init(&up->port.lock); - - up->port.iobase = dcr_base; - dcr_len = dcr_resource_len(dn, 0); - - up->dcr_host = dcr_map(dn, dcr_base, dcr_len); - if (!DCR_MAP_OK(up->dcr_host)) { - printk(KERN_ERR "Cannot map DCR resources for NWPSERIAL"); - goto out; - } - } - - ret = uart_add_one_port(&nwpserial_reg, &up->port); - if (ret == 0) - ret = up->port.line; - -out: - mutex_unlock(&nwpserial_mutex); - - return ret; -} -EXPORT_SYMBOL(nwpserial_register_port); - -void nwpserial_unregister_port(int line) -{ - struct nwpserial_port *up = &nwpserial_ports[line]; - mutex_lock(&nwpserial_mutex); - uart_remove_one_port(&nwpserial_reg, &up->port); - - up->port.type = PORT_UNKNOWN; - - mutex_unlock(&nwpserial_mutex); -} -EXPORT_SYMBOL(nwpserial_unregister_port); - -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE -static int __init nwpserial_console_init(void) -{ - struct nwpserial_port *up = NULL; - struct device_node *dn; - const char *name; - int dcr_base; - int dcr_len; - int i; - - /* search for a free port */ - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.type == PORT_UNKNOWN) { - up = &nwpserial_ports[i]; - break; - } - - if (up == NULL) - return -1; - - name = of_get_property(of_chosen, "linux,stdout-path", NULL); - if (name == NULL) - return -1; - - dn = of_find_node_by_path(name); - if (!dn) - return -1; - - spin_lock_init(&up->port.lock); - up->port.ops = &nwpserial_pops; - up->port.type = PORT_NWPSERIAL; - up->port.fifosize = 16; - - dcr_base = dcr_resource_start(dn, 0); - dcr_len = dcr_resource_len(dn, 0); - up->port.iobase = dcr_base; - - up->dcr_host = dcr_map(dn, dcr_base, dcr_len); - if (!DCR_MAP_OK(up->dcr_host)) { - printk("Cannot map DCR resources for SERIAL"); - return -1; - } - register_console(&nwpserial_console); - return 0; -} -console_initcall(nwpserial_console_init); -#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 6d002eeb2516..920468bf4e83 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -216,11 +216,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev) break; } #endif -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - case PORT_NWPSERIAL: - ret = nwpserial_register_port(&port); - break; -#endif default: /* need to add code for these */ case PORT_UNKNOWN: @@ -253,11 +248,6 @@ static int of_platform_serial_remove(struct platform_device *ofdev) serial8250_unregister_port(info->line); break; #endif -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - case PORT_NWPSERIAL: - nwpserial_unregister_port(info->line); - break; -#endif default: /* need to add code for these */ break; @@ -356,10 +346,6 @@ static const struct of_device_id of_platform_serial_table[] = { .data = (void *)PORT_XSCALE, }, { .compatible = "mrvl,pxa-uart", .data = (void *)PORT_XSCALE, }, -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - { .compatible = "ibm,qpace-nwp-serial", - .data = (void *)PORT_NWPSERIAL, }, -#endif { /* end of list */ }, }; MODULE_DEVICE_TABLE(of, of_platform_serial_table); |