diff options
author | Masahiro Yamada <yamada.masahiro@socionext.com> | 2015-10-28 12:46:05 +0900 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2015-12-13 19:59:48 -0800 |
commit | bd94c4077a0b2ecc35562c294f80f3659ecd8499 (patch) | |
tree | 939d81f6945ce1b0925ab4bf6f7e40c399057e17 /drivers/tty | |
parent | 004e2ed5cc6d89201140ca96693bf9c0b2945f43 (diff) |
serial: support 16-bit register interface for console
Currently, 8-bit (MMIO) and 32-bit (MMIO32) register interfaces are
supported for the 8250 console, but the 16-bit (MMIO16) is not.
The 8250 UART device on my board is connected to a 16-bit bus and
my main motivation is to use earlycon with it.
(Refer to arch/arm/boot/dts/uniphier-support-card.dtsi)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 7 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_early.c | 5 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 20 | ||||
-rw-r--r-- | drivers/tty/serial/earlycon.c | 15 | ||||
-rw-r--r-- | drivers/tty/serial/of_serial.c | 3 | ||||
-rw-r--r-- | drivers/tty/serial/serial_core.c | 9 |
6 files changed, 50 insertions, 9 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 39126460c1f5..c9720a97a977 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -620,7 +620,7 @@ static int univ8250_console_setup(struct console *co, char *options) * @options: ptr to option string from console command line * * Only attempts to match console command lines of the form: - * console=uart[8250],io|mmio|mmio32,<addr>[,<options>] + * console=uart[8250],io|mmio|mmio16|mmio32,<addr>[,<options>] * console=uart[8250],0x<addr>[,<options>] * This form is used to register an initial earlycon boot console and * replace it with the serial8250_console at 8250 driver init. @@ -650,8 +650,9 @@ static int univ8250_console_match(struct console *co, char *name, int idx, if (port->iotype != iotype) continue; - if ((iotype == UPIO_MEM || iotype == UPIO_MEM32) && - (port->mapbase != addr)) + if ((iotype == UPIO_MEM || iotype == UPIO_MEM16 || + iotype == UPIO_MEM32 || iotype == UPIO_MEM32BE) + && (port->mapbase != addr)) continue; if (iotype == UPIO_PORT && port->iobase != addr) continue; diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index ca16195fb069..af62131af21e 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -42,6 +42,8 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse switch (port->iotype) { case UPIO_MEM: return readb(port->membase + offset); + case UPIO_MEM16: + return readw(port->membase + (offset << 1)); case UPIO_MEM32: return readl(port->membase + (offset << 2)); case UPIO_MEM32BE: @@ -59,6 +61,9 @@ static void __init serial8250_early_out(struct uart_port *port, int offset, int case UPIO_MEM: writeb(value, port->membase + offset); break; + case UPIO_MEM16: + writew(value, port->membase + (offset << 1)); + break; case UPIO_MEM32: writel(value, port->membase + (offset << 2)); break; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 52d82d2ac726..8d262bce97e4 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -368,6 +368,18 @@ static void mem_serial_out(struct uart_port *p, int offset, int value) writeb(value, p->membase + offset); } +static void mem16_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + writew(value, p->membase + offset); +} + +static unsigned int mem16_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return readw(p->membase + offset); +} + static void mem32_serial_out(struct uart_port *p, int offset, int value) { offset = offset << p->regshift; @@ -425,6 +437,11 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = mem_serial_out; break; + case UPIO_MEM16: + p->serial_in = mem16_serial_in; + p->serial_out = mem16_serial_out; + break; + case UPIO_MEM32: p->serial_in = mem32_serial_in; p->serial_out = mem32_serial_out; @@ -459,6 +476,7 @@ serial_port_out_sync(struct uart_port *p, int offset, int value) { switch (p->iotype) { case UPIO_MEM: + case UPIO_MEM16: case UPIO_MEM32: case UPIO_MEM32BE: case UPIO_AU: @@ -2462,6 +2480,7 @@ static int serial8250_request_std_resource(struct uart_8250_port *up) case UPIO_TSI: case UPIO_MEM32: case UPIO_MEM32BE: + case UPIO_MEM16: case UPIO_MEM: if (!port->mapbase) break; @@ -2499,6 +2518,7 @@ static void serial8250_release_std_resource(struct uart_8250_port *up) case UPIO_TSI: case UPIO_MEM32: case UPIO_MEM32BE: + case UPIO_MEM16: case UPIO_MEM: if (!port->mapbase) break; diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index f09636083426..07f7393210db 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -71,10 +71,16 @@ static int __init parse_options(struct earlycon_device *device, char *options) return -EINVAL; switch (port->iotype) { + case UPIO_MEM: + port->mapbase = addr; + break; + case UPIO_MEM16: + port->regshift = 1; + port->mapbase = addr; + break; case UPIO_MEM32: case UPIO_MEM32BE: - port->regshift = 2; /* fall-through */ - case UPIO_MEM: + port->regshift = 2; port->mapbase = addr; break; case UPIO_PORT: @@ -91,10 +97,11 @@ static int __init parse_options(struct earlycon_device *device, char *options) strlcpy(device->options, options, length); } - if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM32 || - port->iotype == UPIO_MEM32BE) + if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM16 || + port->iotype == UPIO_MEM32 || port->iotype == UPIO_MEM32BE) pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n", (port->iotype == UPIO_MEM) ? "" : + (port->iotype == UPIO_MEM16) ? "16" : (port->iotype == UPIO_MEM32) ? "32" : "32be", (unsigned long long)port->mapbase, device->options); diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index de5029649795..6d002eeb2516 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -122,6 +122,9 @@ static int of_platform_serial_setup(struct platform_device *ofdev, case 1: port->iotype = UPIO_MEM; break; + case 2: + port->iotype = UPIO_MEM16; + break; case 4: port->iotype = of_device_is_big_endian(np) ? UPIO_MEM32BE : UPIO_MEM32; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 22cfc3271744..b1f54ab1818c 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1818,8 +1818,8 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co) * @options: ptr for <options> field; NULL if not present (out) * * Decodes earlycon kernel command line parameters of the form - * earlycon=<name>,io|mmio|mmio32|mmio32be|mmio32native,<addr>,<options> - * console=<name>,io|mmio|mmio32|mmio32be|mmio32native,<addr>,<options> + * earlycon=<name>,io|mmio|mmio16|mmio32|mmio32be|mmio32native,<addr>,<options> + * console=<name>,io|mmio|mmio16|mmio32|mmio32be|mmio32native,<addr>,<options> * * The optional form * earlycon=<name>,0x<addr>,<options> @@ -1834,6 +1834,9 @@ int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr, if (strncmp(p, "mmio,", 5) == 0) { *iotype = UPIO_MEM; p += 5; + } else if (strncmp(p, "mmio16,", 7) == 0) { + *iotype = UPIO_MEM16; + p += 7; } else if (strncmp(p, "mmio32,", 7) == 0) { *iotype = UPIO_MEM32; p += 7; @@ -2186,6 +2189,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port) "I/O 0x%lx offset 0x%x", port->iobase, port->hub6); break; case UPIO_MEM: + case UPIO_MEM16: case UPIO_MEM32: case UPIO_MEM32BE: case UPIO_AU: @@ -2831,6 +2835,7 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2) return (port1->iobase == port2->iobase) && (port1->hub6 == port2->hub6); case UPIO_MEM: + case UPIO_MEM16: case UPIO_MEM32: case UPIO_MEM32BE: case UPIO_AU: |