tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

120 files changed, 97163 insertions, 0 deletions

diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index d3685f071b8d..396277216e4f 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_R3964)		+= n_r3964.o
 
 obj-y				+= vt/
 obj-$(CONFIG_HVC_DRIVER)	+= hvc/
+obj-y				+= serial/
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c
new file mode 100644
index 000000000000..d89aa38c5cf0
--- /dev/null
+++ b/drivers/tty/serial/21285.c
@@ -0,0 +1,513 @@
+/*
+ * linux/drivers/serial/21285.c
+ *
+ * Driver for the serial port on the 21285 StrongArm-110 core logic chip.
+ *
+ * Based on drivers/char/serial.c
+ */
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/device.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/dec21285.h>
+#include <mach/hardware.h>
+
+#define BAUD_BASE		(mem_fclk_21285/64)
+
+#define SERIAL_21285_NAME	"ttyFB"
+#define SERIAL_21285_MAJOR	204
+#define SERIAL_21285_MINOR	4
+
+#define RXSTAT_DUMMY_READ	0x80000000
+#define RXSTAT_FRAME		(1 << 0)
+#define RXSTAT_PARITY		(1 << 1)
+#define RXSTAT_OVERRUN		(1 << 2)
+#define RXSTAT_ANYERR		(RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN)
+
+#define H_UBRLCR_BREAK		(1 << 0)
+#define H_UBRLCR_PARENB		(1 << 1)
+#define H_UBRLCR_PAREVN		(1 << 2)
+#define H_UBRLCR_STOPB		(1 << 3)
+#define H_UBRLCR_FIFO		(1 << 4)
+
+static const char serial21285_name[] = "Footbridge UART";
+
+#define tx_enabled(port)	((port)->unused[0])
+#define rx_enabled(port)	((port)->unused[1])
+
+/*
+ * The documented expression for selecting the divisor is:
+ *  BAUD_BASE / baud - 1
+ * However, typically BAUD_BASE is not divisible by baud, so
+ * we want to select the divisor that gives us the minimum
+ * error.  Therefore, we want:
+ *  int(BAUD_BASE / baud - 0.5) ->
+ *  int(BAUD_BASE / baud - (baud >> 1) / baud) ->
+ *  int((BAUD_BASE - (baud >> 1)) / baud)
+ */
+
+static void serial21285_stop_tx(struct uart_port *port)
+{
+	if (tx_enabled(port)) {
+		disable_irq_nosync(IRQ_CONTX);
+		tx_enabled(port) = 0;
+	}
+}
+
+static void serial21285_start_tx(struct uart_port *port)
+{
+	if (!tx_enabled(port)) {
+		enable_irq(IRQ_CONTX);
+		tx_enabled(port) = 1;
+	}
+}
+
+static void serial21285_stop_rx(struct uart_port *port)
+{
+	if (rx_enabled(port)) {
+		disable_irq_nosync(IRQ_CONRX);
+		rx_enabled(port) = 0;
+	}
+}
+
+static void serial21285_enable_ms(struct uart_port *port)
+{
+}
+
+static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	struct tty_struct *tty = port->state->port.tty;
+	unsigned int status, ch, flag, rxs, max_count = 256;
+
+	status = *CSR_UARTFLG;
+	while (!(status & 0x10) && max_count--) {
+		ch = *CSR_UARTDR;
+		flag = TTY_NORMAL;
+		port->icount.rx++;
+
+		rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ;
+		if (unlikely(rxs & RXSTAT_ANYERR)) {
+			if (rxs & RXSTAT_PARITY)
+				port->icount.parity++;
+			else if (rxs & RXSTAT_FRAME)
+				port->icount.frame++;
+			if (rxs & RXSTAT_OVERRUN)
+				port->icount.overrun++;
+
+			rxs &= port->read_status_mask;
+
+			if (rxs & RXSTAT_PARITY)
+				flag = TTY_PARITY;
+			else if (rxs & RXSTAT_FRAME)
+				flag = TTY_FRAME;
+		}
+
+		uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag);
+
+		status = *CSR_UARTFLG;
+	}
+	tty_flip_buffer_push(tty);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t serial21285_tx_chars(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	struct circ_buf *xmit = &port->state->xmit;
+	int count = 256;
+
+	if (port->x_char) {
+		*CSR_UARTDR = port->x_char;
+		port->icount.tx++;
+		port->x_char = 0;
+		goto out;
+	}
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		serial21285_stop_tx(port);
+		goto out;
+	}
+
+	do {
+		*CSR_UARTDR = xmit->buf[xmit->tail];
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0 && !(*CSR_UARTFLG & 0x20));
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		serial21285_stop_tx(port);
+
+ out:
+	return IRQ_HANDLED;
+}
+
+static unsigned int serial21285_tx_empty(struct uart_port *port)