Merge tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 4.17-rc1

  Not all that big really, most are just small fixes and additions to
  existing drivers. There's a bunch of work on the imx serial driver
  recently for some reason, and a new embedded serial driver added as
  well.

  Full details are in the shortlog.

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits)
  serial: expose buf_overrun count through proc interface
  serial: mvebu-uart: fix tx lost characters
  tty: serial: msm_geni_serial: Fix return value check in qcom_geni_serial_probe()
  tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP
  8250-men-mcb: add support for 16z025 and 16z057
  powerpc: Mark the variable earlycon_acpi_spcr_enable maybe_unused
  serial: stm32: fix initialization of RS485 mode
  ARM: dts: STi: Remove "console=ttyASN" from bootargs for STi boards
  vt: change SGR 21 to follow the standards
  serdev: Fix typo in serdev_device_alloc
  ARM: dts: STi: Fix aliases property name for STi boards
  tty: st-asc: Update tty alias
  serial: stm32: add support for RS485 hardware control mode
  dt-bindings: serial: stm32: add RS485 optional properties
  selftests: add devpts selftests
  devpts: comment devpts_mntget()
  devpts: resolve devpts bind-mounts
  devpts: hoist out check for DEVPTS_SUPER_MAGIC
  serial: 8250: Add Nuvoton NPCM UART
  serial: mxs-auart: disable clks of Alphascale ASM9260
  ...

31 files changed, 2367 insertions, 632 deletions

diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index 3bade5ad3d71..4293c172e120 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -88,6 +88,16 @@ config HVC_DCC
 	 driver. This console is used through a JTAG only on ARM. If you don't have
 	 a JTAG then you probably don't want this option.
 
+config HVC_RISCV_SBI
+	bool "RISC-V SBI console support"
+	depends on RISCV
+	select HVC_DRIVER
+	help
+	  This enables support for console output via RISC-V SBI calls, which
+	  is normally used only during boot to output printk.
+
+	  If you don't know what do to here, say Y.
+
 config HVCS
 	tristate "IBM Hypervisor Virtual Console Server support"
 	depends on PPC_PSERIES && HVC_CONSOLE
diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile
index 7da1934d34e8..98880e357941 100644
--- a/drivers/tty/hvc/Makefile
+++ b/drivers/tty/hvc/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_HVC_IRQ)		+= hvc_irq.o
 obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
 obj-$(CONFIG_HVC_IUCV)		+= hvc_iucv.o
 obj-$(CONFIG_HVC_UDBG)		+= hvc_udbg.o
+obj-$(CONFIG_HVC_RISCV_SBI)	+= hvc_riscv_sbi.o
 obj-$(CONFIG_HVCS)		+= hvcs.o
diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
new file mode 100644
index 000000000000..75155bde2b88
--- /dev/null
+++ b/drivers/tty/hvc/hvc_riscv_sbi.c
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008 David Gibson, IBM Corporation
+ * Copyright (C) 2012 Regents of the University of California
+ * Copyright (C) 2017 SiFive
+ */
+
+#include <linux/console.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include <asm/sbi.h>
+
+#include "hvc_console.h"
+
+static int hvc_sbi_tty_put(uint32_t vtermno, const char *buf, int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		sbi_console_putchar(buf[i]);
+
+	return i;
+}
+
+static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
+{
+	int i, c;
+
+	for (i = 0; i < count; i++) {
+		c = sbi_console_getchar();
+		if (c < 0)
+			break;
+		buf[i] = c;
+	}
+
+	return i;
+}
+
+static const struct hv_ops hvc_sbi_ops = {
+	.get_chars = hvc_sbi_tty_get,
+	.put_chars = hvc_sbi_tty_put,
+};
+
+static int __init hvc_sbi_init(void)
+{
+	return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
+}
+device_initcall(hvc_sbi_init);
+
+static int __init hvc_sbi_console_init(void)
+{
+	hvc_instantiate(0, 0, &hvc_sbi_ops);
+	add_preferred_console("hvc", 0, NULL);
+
+	return 0;
+}
+console_initcall(hvc_sbi_console_init);
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index f439c72b9e3c..df93b727e984 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -350,7 +350,7 @@ static struct bus_type serdev_bus_type = {
 };
 
 /**
- * serdev_controller_alloc() - Allocate a new serdev device
+ * serdev_device_alloc() - Allocate a new serdev device
  * @ctrl:	associated controller
  *
  * Caller is responsible for either calling serdev_device_add() to add the
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index cd1b94a0f451..6fcdb90f616a 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -9,6 +9,7 @@
  * LCR is written whilst busy.  If it is, then a busy detect interrupt is
  * raised, the LCR needs to be rewritten and the uart status register read.
  */
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -119,10 +120,27 @@ static void dw8250_check_lcr(struct uart_port *p, int value)
 	 */
 }
 
+/* Returns once the transmitter is empty or we run out of retries */
+static void dw8250_tx_wait_empty(struct uart_port *p, int tries)
+{
+	unsigned int lsr;
+
+	while (tries--) {
+		lsr = readb (p->membase + (UART_LSR << p->regshift));
+		if (lsr & UART_LSR_TEMT)
+			break;
+		udelay (10);
+	}
+}
+
 static void dw8250_serial_out(struct uart_port *p, int offset, int value)
 {
 	struct dw8250_data *d = p->private_data;
 
+	/* Allow the TX to drain before we reconfigure */
+	if (offset == UART_LCR)
+		dw8250_tx_wait_empty(p, 1000);
+
 	writeb(value, p->membase + (offset << p->regshift));
 
 	if (offset == UART_LCR && !d->uart_16550_compatible)
@@ -339,17 +357,11 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 			p->serial_in = dw8250_serial_in32be;
 			p->serial_out = dw8250_serial_out32be;
 		}
-	} else if (has_acpi_companion(p->dev)) {
-		const struct acpi_device_id *id;
-
-		id = acpi_match_device(p->dev->driver->acpi_match_table,
-				       p->dev);
-		if (id && !strcmp(id->id, "APMC0D08")) {
-			p->iotype = UPIO_MEM32;
-			p->regshift = 2;
-			p->serial_in = dw8250_serial_in32;
-			data->uart_16550_compatible = true;
-		}
+	} else if (acpi_dev_present("APMC0D08", NULL, -1)) {
+		p->iotype = UPIO_MEM32;
+		p->regshift = 2;
+		p->serial_in = dw8250_serial_in32;
+		data->uart_16550_compatible = true;
 	}
 
 	/* Platforms with iDMA */
diff --git a/drivers/tty/serial/8250/8250_men_mcb.c b/drivers/tty/serial/8250/8250_men_mcb.c
index 308977807994..127017cc41d9 100644
--- a/drivers/tty/serial/8250/8250_men_mcb.c
+++ b/drivers/tty/serial/8250/8250_men_mcb.c
@@ -1,12 +1,19 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/io.h>
 #include <linux/mcb.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <uapi/linux/serial_core.h>
 
+#define MEN_UART_ID_Z025 0x19
+#define MEN_UART_ID_Z057 0x39
+#define MEN_UART_ID_Z125 0x7d
+
+#define MEN_UART_MEM_SIZE 0x10
+
 struct serial_8250_men_mcb_data {
 	struct uart_8250_port uart;
 	int line;
@@ -18,7 +25,7 @@ struct serial_8250_men_mcb_data {
  * parameter in order to really set the correct baudrate, and
  * do so if possible without user interaction
  */
-static u32 men_z125_lookup_uartclk(struct mcb_device *mdev)
+static u32 men_lookup_uartclk(struct mcb_device *mdev)
 {
 	/* use default value if board is not available below */
 	u32 clkval = 1041666;
@@ -28,10 +35,12 @@ static u32 men_z125_lookup_uartclk(struct mcb_device *mdev)
 		mdev->bus->name);
 	if  (strncmp(mdev->bus->name, "F075", 4) == 0)
 		clkval = 1041666;
-	else if  (strncmp(mdev->bus->name, "F216", 4) == 0)
+	else if (strncmp(mdev->bus->name, "F216", 4) == 0)
 		clkval = 1843200;
 	else if (strncmp(mdev->bus->name, "G215", 4) == 0)
 		clkval = 1843200;
+	else if (strncmp(mdev->bus->name, "F210", 4) == 0)
+		clkval = 115200;
 	else
 		dev_info(&mdev->dev,
 			 "board not detected, using default uartclk\n");
@@ -41,62 +50,108 @@ static u32 men_z125_lookup_uartclk(struct mcb_device *mdev)
 	return clkval;
 }
 
+static unsigned int get_num_ports(struct mcb_device *mdev,
+				  void __iomem *membase)
+{
+	switch (mdev->id) {
+	case MEN_UART_ID_Z125:
+		return 1U;
+	case MEN_UART_ID_Z025:
+		return readb(membase) >> 4;
+	case MEN_UART_ID_Z057:
+		return 4U;
+	default:
+		dev_err(&mdev->dev, "no supported device!\n");
+		return -ENODEV;
+	}
+}
+
 static int serial_8250_men_mcb_probe(struct mcb_device *mdev,
 				     const struct mcb_device_id *id)
 {
 	struct serial_8250_men_mcb_data *data;
 	struct resource *mem;
-
-	data = devm_kzalloc(&mdev->dev,
-			    sizeof(struct serial_8250_men_mcb_data),
-			    GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	mcb_set_drvdata(mdev, data);
-	data->uart.port.dev = mdev->dma_dev;
-	spin_lock_init(&data->uart.port.lock);
-
-	data->uart.port.type = PORT_16550;
-	data->uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
-	data->uart.port.iotype = UPIO_MEM;
-	data->uart.port.uartclk = men_z125_lookup_uartclk(mdev);
-	data->uart.port.regshift = 0;
-	data->uart.port.fifosize = 60;
+	unsigned int num_ports;
+	unsigned int i;
+	void __iomem *membase;
 
 	mem = mcb_get_resource(mdev, IORESOURCE_MEM);
 	if (mem == NULL)
 		return -ENXIO;
+	membase = devm_ioremap_resource(&mdev->dev, mem);
+	if (IS_ERR(membase))
+		return PTR_ERR_OR_ZERO(membase);
 
-	data->uart.port.irq = mcb_get_irq(mdev);
+	num_ports = get_num_ports(mdev, membase);
 
-	data->uart.port.membase = devm_ioremap_resource(&mdev->dev, mem);
-	if (IS_ERR(data->uart.port.membase))
-		return PTR_ERR_OR_ZERO(data->uart.port.membase);
+	dev_dbg(&mdev->dev, "found a 16z%03u with %u ports\n",
+		mdev->id, num_ports);
 
-	data->uart.port.mapbase = (unsigned long) mem->start;
-	data->uart.port.iobase = data->uart.port.mapbase;
+	if (num_ports == 0 || num_ports > 4) {
+		dev_err(&mdev->dev, "unexpected number of ports: %u\n",
+			num_ports);
+		return -ENODEV;
+	}
 
-	/* ok, register the port */
-	data->line = serial8250_register_8250_port(&data->uart);
-	if (data->line < 0)
-		return data->line;
+	data = devm_kcalloc(&mdev->dev, num_ports,
+			    sizeof(struct serial_8250_men_mcb_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
 
-	dev_info(&mdev->dev, "found 16Z125 UART: ttyS%d\n", data->line);
+	mcb_set_drvdata(mdev, data);
+
+	for (i = 0; i < num_ports; i++) {
+		data[i].uart.port.dev = mdev->dma_dev;
+		spin_lock_init(&data[i].uart.port.lock);
+
+		data[i].uart.port.type = PORT_16550;
+		data[i].uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ
+					  | UPF_FIXED_TYPE;
+		data[i].uart.port.iotype = UPIO_MEM;
+		data[i].uart.port.uartclk = men_lookup_uartclk(mdev);
+		data[i].uart.port.regshift = 0;
+		data[i].uart.port.irq = mcb_get_irq(mdev);
+		data[i].uart.port.membase = membase;
+		data[i].uart.port.fifosize = 60;
+		data[i].uart.port.mapbase = (unsigned long) mem->start
+					    + i * MEN_UART_MEM_SIZE;
+		data[i].uart.port.iobase = data[i].uart.port.mapbase;
+
+		/* ok, register the port */
+		data[i].line = serial8250_register_8250_port(&data[i].uart);
+		if (data[i].line < 0) {
+			dev_err(&mdev->dev, "unable to register UART port\n");
+			return data[i].line;
+		}
+		dev_info(&mdev->dev, "found MCB UART: ttyS%d\n", data[i].line);
+	}
 
 	return 0;
 }
 
 static void serial_8250_men_mcb_remove(struct mcb_device *mdev)
 {
+	unsigned int num_ports, i;
 	struct serial_8250_men_mcb_data *data = mcb_get_drvdata(mdev);
 
-	if (data)
-		serial8250_unregister_port(data->line);
+	if (!data)
+		return;
+
+	num_ports = get_num_ports(mdev, data[0].uart.port.membase);
+	if (num_ports < 0 || num_ports > 4) {
+		dev_err(&mdev->dev, "error retrieving number of ports!\n");
+		return;
+	}
+
+	for (i = 0; i < num_ports; i++)
+		serial8250_unregister_port(data[i].line);
 }
 
 static const struct mcb_device_id serial_8250_men_mcb_ids[] = {
-	{ .device = 0x7d },
+	{ .device = MEN_UART_ID_Z025 },
+	{ .device = MEN_UART_ID_Z057 },
+	{ .device = MEN_UART_ID_Z125 },
 	{ }
 };
 MODULE_DEVICE_TABLE(mcb, serial_8250_men_mcb_ids);
@@ -113,6 +168,8 @@ static struct mcb_driver mcb_driver = {
 module_mcb_driver(mcb_driver);
 
 MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("MEN 16z125 8250 UART driver");
+MODULE_DESCRIPTION("MEN 8250 UART driver");
 MODULE_AUTHOR("Michael Moese <michael.moese@men.de");
 MODULE_ALIAS("mcb:16z125");
+MODULE_ALIAS("mcb:16z025");
+MODULE_ALIAS("mcb:16z057");
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 160b8906d9b9..9835b1c1cbe1 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -316,6 +316,7 @@ static const struct of_device_id of_platform_serial_table[] = {
 	{ .compatible = "mrvl,mmp-uart",
 		.data = (void *)PORT_XSCALE, },
 	{ .compatible = "ti,da830-uart", .data = (void *)PORT_DA830, },
+	{ .compatible = "nuvoton,npcm750-uart", .data = (void *)PORT_NPCM, },
 	{ /* end of list */ },
 };
 MODULE_DEVICE_TABLE(of, of_platform_serial_table);
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 57f6eba47f44..624b501fd253 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -114,6 +114,7 @@ struct omap8250_priv {
 	struct uart_8250_dma omap8250_dma;
 	spinlock_t rx_dma_lock;
 	bool rx_dma_broken;
+	bool throttled;
 };
 
 #ifdef CONFIG_SERIAL_8250_DMA
@@ -692,6 +693,7 @@ static void omap_8250_shutdown(struct uart_port *port)
 
 static void omap_8250_throttle(struct uart_port *port)
 {
+	struct omap8250_priv *priv = port->private_data;
 	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned long flags;
 
@@ -700,6 +702,7 @@ static void omap_8250_throttle(struct uart_port *port)
 	spin_lock_irqsave(&port->lock, flags);
 	up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
 	serial_out(up, UART_IER, up->ier);
+	priv->throttled = true;
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	pm_runtime_mark_last_busy(port->dev);
@@ -738,12 +741,16 @@ static int omap_8250_rs485_config(struct uart_port *port,
 
 static void omap_8250_unthrottle(struct uart_port *port)
 {
+	struct omap8250_priv *priv = port->private_data;
 	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned long flags;
 
 	pm_runtime_get_sync(port->dev);
 
 	spin_lock_irqsave(&port->lock, flags);
+	priv->throttled = false;
+	if (up->dma)
+		up->dma->rx_dma(up);
 	up->ier |= UART_IER_RLSI | UART_IER_RDI;
 	serial_out(up, UART_IER, up->ier);
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -788,6 +795,7 @@ unlock:
 static void __dma_rx_complete(void *param)
 {
 	struct uart_8250_port *p = param;
+	struct omap8250_priv *priv = p->port.private_data;
 	struct uart_8250_dma *dma = p->dma;
 	struct dma_tx_state     state;
 	unsigned long flags;
@@ -805,7 +813,8 @@ static void __dma_rx_complete(void *param)
 		return;
 	}
 	__dma_rx_do_complete(p);
-	omap_8250_rx_dma(p);
+	if (!priv->throttled)
+		omap_8250_rx_dma(p);
 
 	spin_unlock_irqrestore(&p->port.lock, flags);
 }
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index a93f77ab3da0..3296a05cda2d 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1685,9 +1685,6 @@ pci_wch_ch38x_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
 #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
 
-#define PCI_VENDOR_ID_SUNIX		0x1fd4
-#define PCI_DEVICE_ID_SUNIX_1999	0x1999
-
 #define PCIE_VENDOR_ID_WCH		0x1c00
 #define PCIE_DEVICE_ID_WCH_CH382_2S1P	0x3250
 #define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 1328c7e70108..95833cbc4338 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -47,6 +47,10 @@
 #define UART_EXAR_SLEEP		0x8b	/* Sleep mode */
 #define UART_EXAR_DVID		0x8d	/* Device identification */
 
+/* Nuvoton NPCM timeout register */
+#define UART_NPCM_TOR          7
+#define UART_NPCM_TOIE         BIT(7)  /* Timeout Interrupt Enable */
+
 /*
  * Debugging.
  */
@@ -293,6 +297,15 @@ static const struct serial8250_config uart_config[] = {
 				  UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_NPCM] = {
+		.name		= "Nuvoton 16550",
+		.fifo_size	= 16,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
+				  UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
+		.rxtrig_bytes	= {1, 4, 8, 14},
+		.flags		= UART_CAP_FIFO,
+	},
 };
 
 /* Uart divisor latch read */
@@ -1854,7 +1867,8 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 
 	status = serial_port_in(port, UART_LSR);
 
-	if (status & (UART_LSR_DR | UART_LSR_BI)) {
+	if (status & (UART_LSR_DR | UART_LSR_BI) &&
+	    iir & UART_IIR_RDI) {
 		if (!up->dma || handle_rx_dma(up, iir))
 			status = serial8250_rx_chars(up, status);
 	}
@@ -2140,6 +2154,15 @@ int serial8250_do_startup(struct uart_port *port)
 				UART_DA830_PWREMU_MGMT_FREE);
 	}
 
+	if (port->type == PORT_NPCM) {
+		/*
+		 * Nuvoton calls the scratch register 'UART_TOR' (timeout
+		 * register). Enable it, and set TIOC (timeout interrupt
+		 * comparator) to be 0x20 for correct operation.
+		 */
+		serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20);
+	}
+
 #ifdef CONFIG_SERIAL_8250_RSA
 	/*
 	 * If this is an RSA port, see if we can kick it up to the
@@ -2462,6 +2485,15 @@ static unsigned int xr17v35x_get_divisor(struct uart_8250_port *up,
 	return quot_16 >> 4;
 }
 
+/* Nuvoton NPCM UARTs have a custom divisor calculation */
+static unsigned int npcm_get_divisor(struct uart_8250_port *up,
+		unsigned int baud)
+{
+	struct uart_port *port = &up->port;
+
+	return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2;
+}
+
 static unsigned int serial8250_get_divisor(struct uart_8250_port *up,
 					   unsigned int baud,
 					   unsigned int *frac)
@@ -2482,6 +2514,8 @@ static unsigned int serial8250_get_divisor(struct uart_8250_port *up,
 		quot = 0x8002;
 	else if (up->port.type == PORT_XR17V35X)
 		quot = xr17v35x_get_divisor(up, baud, frac);
+	else if (up->port.type == PORT_NPCM)
+		quot = npcm_get_divisor(up, baud);
 	else
 		quot = uart_get_divisor(port, baud);
 
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 16b1496e6105..f005eaf8bc57 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -157,11 +157,12 @@ config SERIAL_8250_CS
 	  If unsure, say N.
 
 config SERIAL_8250_MEN_MCB
-	tristate "MEN Z125 UART device support"
+	tristate "MEN MCB UART device support"
 	depends on MCB && SERIAL_8250
 	help
 	  This enables support for FPGA based UARTs found on many MEN
-	  boards. This driver enables support for the Z125 UARTs.
+	  boards. This driver enables support for the 16z025, 16z057
+	  and 16z125 UARTs.
 
 	  To compile this driver as a module, chose M here: the
 	  module will be called 8250_men_mcb.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 736720a8d84f..0f058df0b070 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -989,6 +989,21 @@ config SERIAL_MSM_CONSOLE
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_EARLYCON
 
+config SERIAL_QCOM_GENI
+	tristate "QCOM on-chip GENI based serial port support"
+	depends on ARCH_QCOM || COMPILE_TEST
+	depends on QCOM_GENI_SE
+	select SERIAL_CORE
+
+config SERIAL_QCOM_GENI_CONSOLE
+	bool "QCOM GENI Serial Console support"
+	depends on SERIAL_QCOM_GENI=y
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
+	help
+	  Serial console driver for Qualcomm Technologies Inc's GENI based
+	  QUP hardware.
+
 config SERIAL_VT8500
 	bool "VIA VT8500 on-chip serial port support"
 	depends on ARCH_VT8500
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index b30ee2e5d518..daac675612df 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
 obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
+obj-$(CONFIG_SERIAL_QCOM_GENI) += qcom_geni_serial.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
 obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index b88b05f8e81e..0e487ce091ac 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -109,6 +109,20 @@ static unsigned int altera_uart_get_mctrl(struct uart_port *port)
 	return sigs;
 }
 
+static void altera_uart_update_ctrl_reg(struct altera_uart *pp)
+{
+	unsigned short imr = pp->imr;
+
+	/*
+	 * If the device doesn't have an irq, ensure that the irq bits are
+	 * masked out to keep the irq line inactive.
+	 */
+	if (!pp->port.irq)
+		imr &= ALTERA_UART_CONTROL_TRBK_MSK | ALTERA_UART_CONTROL_RTS_MSK;
+
+	altera_uart_writel(&pp->port, imr, ALTERA_UART_CONTROL_REG);
+}
+
 static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
 {
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
@@ -118,7 +132,7 @@ static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
 		pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
 	else
 		pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
-	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
+	altera_uart_update_ctrl_reg(pp);
 }
 
 static void altera_uart_start_tx(struct uart_port *port)
@@ -126,7 +140,7 @@ static void altera_uart_start_tx(struct uart_port *port)
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
 
 	pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
-	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
+	altera_uart_update_ctrl_reg(pp);
 }
 
 static void altera_uart_stop_tx(struct uart_port *port)
@@ -134,7 +148,7 @@ static void altera_uart_stop_tx(struct uart_port *port)
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
 
 	pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
-	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
+	altera_uart_update_ctrl_reg(pp);
 }
 
 static void altera_uart_stop_rx(struct uart_port *port)
@@ -142,7 +156,7 @@ static void altera_uart_stop_rx(struct uart_port *port)
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
 
 	pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
-	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
+	altera_uart_update_ctrl_reg(pp);
 }
 
 static void altera_uart_break_ctl(struct uart_port *port, int break_state)
@@ -155,7 +169,7 @@ static void altera_uart_break_ctl(struct uart_port *port, int break_state)
 		pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK;
 	else
 		pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK;
-	altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
+	altera_uart_update_ctrl_reg(pp);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -262,7 +276,7 @@ static void altera_uart_tx_chars(struct altera_uart *pp)
 
 	if (xmit->head == xmit->tail) {
 		pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
-		altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG);
+		altera_uart_update_ctrl_reg(pp);
 	}
 }
 
@@ -307,27 +321,27 @@ static int altera_uart_startup(struct uart_port *port)
 {
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
 	unsigned long flags;
-	int ret;
 
 	if (!port->irq) {
 		timer_setup(&pp->tmr, altera_uart_timer, 0);
 		mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
-		return 0;
-	}
-
-	ret = request_irq(port->irq, altera_uart_interrupt, 0,
-			DRV_NAME, port);
-	if (ret) {
-		pr_err(DRV_NAME ": unable to attach Altera UART %d "
-		       "interrupt vector=%d\n", port->line, port->irq);
-		return ret;
+	} else {
+		int ret;
+
+		ret = request_irq(port->irq, altera_uart_interrupt, 0,
+				DRV_NAME, port);
+		if (ret) {
+			pr_err(DRV_NAME ": unable to attach Altera UART %d "
+			       "interrupt vector=%d\n", port->line, port->irq);
+			return ret;
+		}
 	}
 
 	spin_lock_irqsave(&port->lock, flags);
 
 	/* Enable RX interrupts now */
 	pp->imr = ALTERA_UART_CONTROL_RRDY_MSK;
-	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	altera_uart_update_ctrl_reg(pp);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 
@@ -343,7 +357,7 @@ static void altera_uart_shutdown(struct uart_port *port)
 
 	/* Disable all interrupts now */
 	pp->imr = 0;
-	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	altera_uart_update_ctrl_reg(pp);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 
@@ -432,7 +446,7 @@ static void altera_uart_console_putc(struct uart_port *port, int c)
 		 ALTERA_UART_STATUS_TRDY_MSK))
 		cpu_relax();
 
-	writel(c, port->membase + ALTERA_UART_TXDATA_REG);
+	altera_uart_writel(port, c, ALTERA_UART_TXDATA_REG);
 }
 
 static void altera_uart_console_write(struct console *co, const char *s,
@@ -502,13 +516,13 @@ static int __init altera_uart_earlycon_setup(struct earlycon_device *dev,
 		return -ENODEV;
 
 	/* Enable RX interrupts now */
-	writel(ALTERA_UART_CONTROL_RRDY_MSK,
-	       port->membase + ALTERA_UART_CONTROL_REG);
+	altera_uart_writel(port, ALTERA_UART_CONTROL_RRDY_MSK,
+			   ALTERA_UART_CONTROL_REG);
 
 	if (dev->baud) {
 		unsigned int baudclk = port->uartclk / dev->baud;
 
-		writel(baudclk, port->membase + ALTERA_UART_DIVISOR_REG);
+		altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG);
 	}
 
 	dev->con->write = altera_uart_earlycon_write;
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 2599f9ecccfe..d904a3a345e7 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -593,6 +593,11 @@ static int arc_serial_probe(struct platform_device *pdev)
 	if (dev_id < 0)
 		dev_id = 0;
 
+	if (dev_id >= ARRAY_SIZE(arc_uart_ports)) {
+		dev_err(&pdev->dev, "serial%d out of range\n", dev_id);
+		return -EINVAL;
+	}
+
 	uart = &arc_uart_ports[dev_id];
 	port = &uart->port;
 
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 8cf112f2efc3..51e47a63d61a 100644
--- a/drivers/tty/ser