Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits)
  pch_uart: reference clock on CM-iTC
  pch_phub: add new device ML7213
  n_gsm: fix UIH control byte : P bit should be 0
  n_gsm: add a documentation
  serial: msm_serial_hs: Add MSM high speed UART driver
  tty_audit: fix tty_audit_add_data live lock on audit disabled
  tty: move cd1865.h to drivers/staging/tty/
  Staging: tty: fix build with epca.c driver
  pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()
  Staging: generic_serial: fix double locking bug
  nozomi: don't use flush_scheduled_work()
  tty/serial: Relax the device_type restriction from of_serial
  MAINTAINERS: Update HVC file patterns
  tty: phase out of ioctl file pointer for tty3270 as well
  tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile
  pch_uart: Fix DMA channel miss-setting issue.
  pch_uart: fix exclusive access issue
  pch_uart: fix auto flow control miss-setting issue
  pch_uart: fix uart clock setting issue
  pch_uart : Use dev_xxx not pr_xxx
  ...

Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied
twice, then changes to the same area in one branch)

21 files changed, 2571 insertions, 304 deletions

diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index de0160e3f8c4..d5bfd41707e7 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -393,28 +393,6 @@ static void do_softint(struct work_struct *work)
 #endif   
 }
 
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred.  The path of
- * hangup processing is:
- *
- * 	serial interrupt routine -> (scheduler tqueue) ->
- * 	do_serial_hangup() -> tty->hangup() -> rs_hangup()
- * 
- */
-static void do_serial_hangup(struct work_struct *work)
-{
-	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue_hangup);
-	struct tty_struct	*tty;
-	
-	tty = info->tty;
-	if (!tty)
-		return;
-
-	tty_hangup(tty);
-}
-
-
 static int startup(struct m68k_serial * info)
 {
 	m68328_uart *uart = &uart_addr[info->line];
@@ -967,7 +945,7 @@ static void send_break(struct m68k_serial * info, unsigned int duration)
         local_irq_restore(flags);
 }
 
-static int rs_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
@@ -1347,7 +1325,6 @@ rs68328_init(void)
 	    info->count = 0;
 	    info->blocked_open = 0;
 	    INIT_WORK(&info->tqueue, do_softint);
-	    INIT_WORK(&info->tqueue_hangup, do_serial_hangup);
 	    init_waitqueue_head(&info->open_wait);
 	    init_waitqueue_head(&info->close_wait);
 	    info->line = i;
diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h
index 664ceb0a158c..8c9c3c0745db 100644
--- a/drivers/tty/serial/68328serial.h
+++ b/drivers/tty/serial/68328serial.h
@@ -159,7 +159,6 @@ struct m68k_serial {
 	int			xmit_tail;
 	int			xmit_cnt;
 	struct work_struct	tqueue;
-	struct work_struct	tqueue_hangup;
 	wait_queue_head_t	open_wait;
 	wait_queue_head_t	close_wait;
 };
diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c
index bc21eeae8fde..0a3e8787ed50 100644
--- a/drivers/tty/serial/68360serial.c
+++ b/drivers/tty/serial/68360serial.c
@@ -1240,7 +1240,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int *value)
 }
 #endif
 
-static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
+static int rs_360_tiocmget(struct tty_struct *tty)
 {
 	ser_info_t *info = (ser_info_t *)tty->driver_data;
 	unsigned int result = 0;
@@ -1271,7 +1271,7 @@ static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int rs_360_tiocmset(struct tty_struct *tty, struct file *file,
+static int rs_360_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 #ifdef modem_control
@@ -1405,7 +1405,7 @@ static int rs_360_get_icount(struct tty_struct *tty,
 	return 0;
 }
 
-static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_360_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	int error;
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index 3975df6f7fdb..b3b881bc4712 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -954,6 +954,23 @@ static int broken_efr(struct uart_8250_port *up)
 	return 0;
 }
 
+static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
+{
+	unsigned char status;
+
+	status = serial_in(up, 0x04); /* EXCR2 */
+#define PRESL(x) ((x) & 0x30)
+	if (PRESL(status) == 0x10) {
+		/* already in high speed mode */
+		return 0;
+	} else {
+		status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
+		status |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
+		serial_outp(up, 0x04, status);
+	}
+	return 1;
+}
+
 /*
  * We know that the chip has FIFOs.  Does it have an EFR?  The
  * EFR is located in the same register position as the IIR and
@@ -1025,12 +1042,8 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 			quot = serial_dl_read(up);
 			quot <<= 3;
 
-			status1 = serial_in(up, 0x04); /* EXCR2 */
-			status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
-			status1 |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
-			serial_outp(up, 0x04, status1);
-
-			serial_dl_write(up, quot);
+			if (ns16550a_goto_highspeed(up))
+				serial_dl_write(up, quot);
 
 			serial_outp(up, UART_LCR, 0);
 
@@ -3025,17 +3038,13 @@ void serial8250_resume_port(int line)
 	struct uart_8250_port *up = &serial8250_ports[line];
 
 	if (up->capabilities & UART_NATSEMI) {
-		unsigned char tmp;
-
 		/* Ensure it's still in high speed mode */
 		serial_outp(up, UART_LCR, 0xE0);
 
-		tmp = serial_in(up, 0x04); /* EXCR2 */
-		tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
-		tmp |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
-		serial_outp(up, 0x04, tmp);
+		ns16550a_goto_highspeed(up);
 
 		serial_outp(up, UART_LCR, 0);
+		up->port.uartclk = 921600*16;
 	}
 	uart_resume_port(&serial8250_reg, &up->port);
 }
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2b8334601c8b..d9ccbf825095 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1319,6 +1319,18 @@ config SERIAL_MSM_CONSOLE
 	depends on SERIAL_MSM=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_MSM_HS
+	tristate "MSM UART High Speed: Serial Driver"
+	depends on ARCH_MSM
+	select SERIAL_CORE
+	help
+	  If you have a machine based on MSM family of SoCs, you
+	  can enable its onboard high speed serial port by enabling
+	  this option.
+
+	  Choose M here to compile it as a module. The module will be
+	  called msm_serial_hs.
+
 config SERIAL_VT8500
 	bool "VIA VT8500 on-chip serial port support"
 	depends on ARM && ARCH_VT8500
@@ -1588,12 +1600,25 @@ config SERIAL_IFX6X60
 	  Support for the IFX6x60 modem devices on Intel MID platforms.
 
 config SERIAL_PCH_UART
-	tristate "Intel EG20T PCH UART"
-	depends on PCI && DMADEVICES
+	tristate "Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
+	depends on PCI
 	select SERIAL_CORE
-	select PCH_DMA
 	help
 	  This driver is for PCH(Platform controller Hub) UART of Intel EG20T
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
 	  Enabling PCH_DMA, this PCH UART works as DMA mode.
+
+	  This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/
+	  Output Hub) which is for IVI(In-Vehicle Infotainment) use.
+	  ML7213 is companion chip for Intel Atom E6xx series.
+	  ML7213 is completely compatible for Intel EG20T PCH.
+
+config SERIAL_MSM_SMD
+	bool "Enable tty device interface for some SMD ports"
+	default n
+	depends on MSM_SMD
+	help
+	  Enables userspace clients to read and write to some streaming SMD
+	  ports via tty device interface for MSM chipset.
+
 endmenu
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 8ea92e9c73b0..d94dc005c8a6 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
 obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
+obj-$(CONFIG_SERIAL_MSM_HS) += msm_serial_hs.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
@@ -92,3 +93,4 @@ obj-$(CONFIG_SERIAL_MRST_MAX3110)	+= mrst_max3110.o
 obj-$(CONFIG_SERIAL_MFD_HSU)	+= mfd.o
 obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
 obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
+obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index f9b49b5ff5e1..8f014bb916b7 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -305,28 +305,6 @@ static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS];
 
 #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE)
 
-int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart
-				       *platp)
-{
-	struct uart_port *port;
-	int i;
-
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
-		port = &altera_jtaguart_ports[i].port;
-
-		port->line = i;
-		port->type = PORT_ALTERA_JTAGUART;
-		port->mapbase = platp[i].mapbase;
-		port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
-		port->iotype = SERIAL_IO_MEM;
-		port->irq = platp[i].irq;
-		port->flags = ASYNC_BOOT_AUTOCONF;
-		port->ops = &altera_jtaguart_ops;
-	}
-
-	return 0;
-}
-
 #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS)
 static void altera_jtaguart_console_putc(struct console *co, const char c)
 {
@@ -384,7 +362,7 @@ static int __init altera_jtaguart_console_setup(struct console *co,
 	if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS)
 		return -EINVAL;
 	port = &altera_jtaguart_ports[co->index].port;
-	if (port->membase == 0)
+	if (port->membase == NULL)
 		return -ENODEV;
 	return 0;
 }
@@ -431,22 +409,45 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
 {
 	struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data;
 	struct uart_port *port;
-	int i;
+	struct resource *res_irq, *res_mem;
+	int i = pdev->id;
 
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
-		port = &altera_jtaguart_ports[i].port;
+	/* -1 emphasizes that the platform must have one port, no .N suffix */
+	if (i == -1)
+		i = 0;
 
-		port->line = i;
-		port->type = PORT_ALTERA_JTAGUART;
-		port->mapbase = platp[i].mapbase;
-		port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
-		port->iotype = SERIAL_IO_MEM;
-		port->irq = platp[i].irq;
-		port->ops = &altera_jtaguart_ops;
-		port->flags = ASYNC_BOOT_AUTOCONF;
+	if (i >= ALTERA_JTAGUART_MAXPORTS)
+		return -EINVAL;
 
-		uart_add_one_port(&altera_jtaguart_driver, port);
-	}
+	port = &altera_jtaguart_ports[i].port;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res_mem)
+		port->mapbase = res_mem->start;
+	else if (platp)
+		port->mapbase = platp->mapbase;
+	else
+		return -ENODEV;
+
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res_irq)
+		port->irq = res_irq->start;
+	else if (platp)
+		port->irq = platp->irq;
+	else
+		return -ENODEV;
+
+	port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
+	if (!port->membase)
+		return -ENOMEM;
+
+	port->line = i;
+	port->type = PORT_ALTERA_JTAGUART;
+	port->iotype = SERIAL_IO_MEM;
+	port->ops = &altera_jtaguart_ops;
+	port->flags = UPF_BOOT_AUTOCONF;
+
+	uart_add_one_port(&altera_jtaguart_driver, port);
 
 	return 0;
 }
@@ -454,13 +455,13 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
 static int __devexit altera_jtaguart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
-	int i;
+	int i = pdev->id;
 
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) {
-		port = &altera_jtaguart_ports[i].port;
-		if (port)
-			uart_remove_one_port(&altera_jtaguart_driver, port);
-	}
+	if (i == -1)
+		i = 0;
+
+	port = &altera_jtaguart_ports[i].port;
+	uart_remove_one_port(&altera_jtaguart_driver, port);
 
 	return 0;
 }
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 721216292a50..3a573528555e 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -86,16 +86,12 @@ struct altera_uart {
 
 static u32 altera_uart_readl(struct uart_port *port, int reg)
 {
-	struct altera_uart_platform_uart *platp = port->private_data;
-
-	return readl(port->membase + (reg << platp->bus_shift));
+	return readl(port->membase + (reg << port->regshift));
 }
 
 static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
 {
-	struct altera_uart_platform_uart *platp = port->private_data;
-
-	writel(dat, port->membase + (reg << platp->bus_shift));
+	writel(dat, port->membase + (reg << port->regshift));
 }
 
 static unsigned int altera_uart_tx_empty(struct uart_port *port)
@@ -546,13 +542,17 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	if (!port->membase)
 		return -ENOMEM;
 
+	if (platp)
+		port->regshift = platp->bus_shift;
+	else
+		port->regshift = 0;
+
 	port->line = i;
 	port->type = PORT_ALTERA_UART;
 	port->iotype = SERIAL_IO_MEM;
 	port->uartclk = platp->uartclk;
 	port->ops = &altera_uart_ops;
 	port->flags = UPF_BOOT_AUTOCONF;
-	port->private_data = platp;
 
 	uart_add_one_port(&altera_uart_driver, port);
 
@@ -561,9 +561,15 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 
 static int __devexit altera_uart_remove(struct platform_device *pdev)
 {
-	struct uart_port *port = &altera_uart_ports[pdev->id].port;
+	struct uart_port *port;
+	int i = pdev->id;
 
+	if (i == -1)
+		i = 0;
+
+	port = &altera_uart_ports[i].port;
 	uart_remove_one_port(&altera_uart_driver, port);
+
 	return 0;
 }
 
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 2a1d52fb4936..f119d1761106 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1240,6 +1240,21 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
+static void atmel_set_ldisc(struct uart_port *port, int new)
+{
+	int line = port->line;
+
+	if (line >= port->state->port.tty->driver->num)
+		return;
+
+	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		atmel_enable_ms(port);
+	} else {
+		port->flags &= ~UPF_HARDPPS_CD;
+	}
+}
+
 /*
  * Return string describing the specified port
  */
@@ -1380,6 +1395,7 @@ static struct uart_ops atmel_pops = {
 	.shutdown	= atmel_shutdown,
 	.flush_buffer	= atmel_flush_buffer,
 	.set_termios	= atmel_set_termios,
+	.set_ldisc	= atmel_set_ldisc,
 	.type		= atmel_type,
 	.release_port	= atmel_release_port,
 	.request_port	= atmel_request_port,
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index e95c524d9d18..c3ec0a61d859 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -788,7 +788,7 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
 		sport->port.mapbase = res->start;
 
 		sport->port.irq = platform_get_irq(pdev, 0);
-		if (sport->port.irq < 0) {
+		if ((int)sport->port.irq < 0) {
 			dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n");
 			ret = -ENOENT;
 			goto out_error_unmap;
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index bcc31f2140ac..225123b37f19 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3581,8 +3581,7 @@ rs_break(struct tty_struct *tty, int break_state)
 }
 
 static int
-rs_tiocmset(struct tty_struct *tty, struct file *file,
-		unsigned int set, unsigned int clear)
+rs_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
 {
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 	unsigned long flags;
@@ -3614,7 +3613,7 @@ rs_tiocmset(struct tty_struct *tty, struct file *file,
 }
 
 static int
-rs_tiocmget(struct tty_struct *tty, struct file *file)
+rs_tiocmget(struct tty_struct *tty)
 {
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 	unsigned int result;
@@ -3648,7 +3647,7 @@ rs_tiocmget(struct tty_struct *tty, struct file *file)
 
 
 static int
-rs_ioctl(struct tty_struct *tty, struct file * file,
+rs_ioctl(struct tty_struct *tty,
 	 unsigned int cmd, unsigned long arg)
 {
 	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index ab93763862d5..8ee5a41d340d 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -8,7 +8,7 @@
  *		      Jan Dumon <j.dumon@option.com>
  *
  * Copyright (C) 2009, 2010 Intel Corp
- * Russ Gorby <richardx.r.gorby@intel.com>
+ * Russ Gorby <russ.gorby@intel.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -67,6 +67,7 @@
 #define IFX_SPI_MORE_MASK		0x10
 #define IFX_SPI_MORE_BIT		12	/* bit position in u16 */
 #define IFX_SPI_CTS_BIT			13	/* bit position in u16 */
+#define IFX_SPI_MODE			SPI_MODE_1
 #define IFX_SPI_TTY_ID			0
 #define IFX_SPI_TIMEOUT_SEC		2
 #define IFX_SPI_HEADER_0		(-1)
@@ -76,7 +77,7 @@
 static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev);
 
 /* local variables */
-static int spi_b16 = 1;			/* 8 or 16 bit word length */
+static int spi_bpw = 16;		/* 8, 16 or 32 bit word length */
 static struct tty_driver *tty_drv;
 static struct ifx_spi_device *saved_ifx_dev;
 static struct lock_class_key ifx_spi_key;
@@ -244,7 +245,7 @@ static void ifx_spi_timeout(unsigned long arg)
  *	Map the signal state into Linux modem flags and report the value
  *	in Linux terms
  */
-static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
+static int ifx_spi_tiocmget(struct tty_struct *tty)
 {
 	unsigned int value;
 	struct ifx_spi_device *ifx_dev = tty->driver_data;
@@ -262,7 +263,6 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
 /**
  *	ifx_spi_tiocmset	-	set modem bits
  *	@tty: the tty structure
- *	@filp: file handle issuing the request
  *	@set: bits to set
  *	@clear: bits to clear
  *
@@ -271,7 +271,7 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
  *
  *	FIXME: do we need to kick the tranfers when we do this ?
  */
-static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp,
+static int ifx_spi_tiocmset(struct tty_struct *tty,
 			    unsigned int set, unsigned int clear)
 {
 	struct ifx_spi_device *ifx_dev = tty->driver_data;
@@ -722,9 +722,9 @@ static void ifx_spi_io(unsigned long data)
 		/* note len is BYTES, not transfers */
 		ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE;
 		ifx_dev->spi_xfer.cs_change = 0;
-		ifx_dev->spi_xfer.speed_hz = 12500000;
+		ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz;
 		/* ifx_dev->spi_xfer.speed_hz = 390625; */
-		ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8;
+		ifx_dev->spi_xfer.bits_per_word = spi_bpw;
 
 		ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer;
 		ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer;
@@ -732,7 +732,7 @@ static void ifx_spi_io(unsigned long data)
 		/*
 		 * setup dma pointers
 		 */
-		if (ifx_dev->is_6160) {
+		if (ifx_dev->use_dma) {
 			ifx_dev->spi_msg.is_dma_mapped = 1;
 			ifx_dev->tx_dma = ifx_dev->tx_bus;
 			ifx_dev->rx_dma = ifx_dev->rx_bus;
@@ -798,8 +798,8 @@ static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev)
 		goto error_ret;
 	}
 
-	pport->ops = &ifx_tty_port_ops;
 	tty_port_init(pport);
+	pport->ops = &ifx_tty_port_ops;
 	ifx_dev->minor = IFX_SPI_TTY_ID;
 	ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor,
 					       &ifx_dev->spi_dev->dev);
@@ -960,7 +960,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 {
 	int ret;
 	int srdy;
-	struct ifx_modem_platform_data *pl_data = NULL;
+	struct ifx_modem_platform_data *pl_data;
 	struct ifx_spi_device *ifx_dev;
 
 	if (saved_ifx_dev) {
@@ -968,6 +968,12 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
+	pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
+	if (!pl_data) {
+		dev_err(&spi->dev, "missing platform data!");
+		return -ENODEV;
+	}
+
 	/* initialize structure to hold our device variables */
 	ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL);
 	if (!ifx_dev) {
@@ -983,14 +989,25 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 	init_timer(&ifx_dev->spi_timer);
 	ifx_dev->spi_timer.function = ifx_spi_timeout;
 	ifx_dev->spi_timer.data = (unsigned long)ifx_dev;
-	ifx_dev->is_6160 = pl_data->is_6160;
+	ifx_dev->modem = pl_data->modem_type;
+	ifx_dev->use_dma = pl_data->use_dma;
+	ifx_dev->max_hz = pl_data->max_hz;
+	/* initialize spi mode, etc */
+	spi->max_speed_hz = ifx_dev->max_hz;
+	spi->mode = IFX_SPI_MODE | (SPI_LOOP & spi->mode);
+	spi->bits_per_word = spi_bpw;
+	ret = spi_setup(spi);
+	if (ret) {
+		dev_err(&spi->dev, "SPI setup wasn't successful %d", ret);
+		return -ENODEV;
+	}
 
 	/* ensure SPI protocol flags are initialized to enable transfer */
 	ifx_dev->spi_more = 0;
 	ifx_dev->spi_slave_cts = 0;
 
 	/*initialize transfer and dma buffers */
-	ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+	ifx_dev->tx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent,
 				IFX_SPI_TRANSFER_SIZE,
 				&ifx_dev->tx_bus,
 				GFP_KERNEL);
@@ -999,7 +1016,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 		ret = -ENOMEM;
 		goto error_ret;
 	}
-	ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+	ifx_dev->rx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent,
 				IFX_SPI_TRANSFER_SIZE,
 				&ifx_dev->rx_bus,
 				GFP_KERNEL);
@@ -1025,18 +1042,11 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 		goto error_ret;
 	}
 
-	pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
-	if (pl_data) {
-		ifx_dev->gpio.reset = pl_data->rst_pmu;
-		ifx_dev->gpio.po = pl_data->pwr_on;
-		ifx_dev->gpio.mrdy = pl_data->mrdy;
-		ifx_dev->gpio.srdy = pl_data->srdy;
-		ifx_dev->gpio.reset_out = pl_data->rst_out;
-	} else {
-		dev_err(&spi->dev, "missing platform data!");
-		ret = -ENODEV;
-		goto error_ret;
-	}
+	ifx_dev->gpio.reset = pl_data->rst_pmu;
+	ifx_dev->gpio.po = pl_data->pwr_on;
+	ifx_dev->gpio.mrdy = pl_data->mrdy;
+	ifx_dev->gpio.srdy = pl_data->srdy;
+	ifx_dev->gpio.reset_out = pl_data->rst_out;
 
 	dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d",
 		 ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy,
@@ -1322,9 +1332,9 @@ static const struct spi_device_id ifx_id_table[] = {
 MODULE_DEVICE_TABLE(spi, ifx_id_table);
 
 /* spi operations */
-static const struct spi_driver ifx_spi_driver_6160 = {
+static const struct spi_driver ifx_spi_driver = {
 	.driver = {
-		.name = "ifx6160",
+		.name = DRVNAME,
 		.bus = &spi_bus_type,
 		.pm = &ifx_spi_pm,
 		.owner = THIS_MODULE},
@@ -1346,7 +1356,7 @@ static void __exit ifx_spi_exit(void)
 {
 	/* unregister */
 	tty_unregister_driver(tty_drv);
-	spi_unregister_driver((void *)&ifx_spi_driver_6160);
+	spi_unregister_driver((void *)&ifx_spi_driver);
 }
 
 /**
@@ -1388,7 +1398,7 @@ static int __init ifx_spi_init(void)
 		return result;
 	}
 
-	result = spi_register_driver((void *)&ifx_spi_driver_6160);
+	result = spi_register_driver((void *)&ifx_spi_driver);
 	if (result) {
 		pr_err("%s: spi_register_driver failed(%d)",
 			DRVNAME, result);
diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h
index deb7b8d977dc..e8464baf9e75 100644
--- a/drivers/tty/serial/ifx6x60.h
+++ b/drivers/tty/serial/ifx6x60.h
@@ -29,8 +29,6 @@
 #define DRVNAME				"ifx6x60"
 #define TTYNAME				"ttyIFX"
 
-/* #define IFX_THROTTLE_CODE */
-
 #define IFX_SPI_MAX_MINORS		1
 #define IFX_SPI_TRANSFER_SIZE		2048
 #define IFX_SPI_FIFO_SIZE		4096
@@ -88,7 +86,9 @@ struct ifx_spi_device {
 	dma_addr_t rx_dma;
 	dma_addr_t tx_dma;
 
-	int is_6160;				/* Modem type */
+	int modem;		/* Modem type */
+	int use_dma;		/* provide dma-able addrs in SPI msg */
+	long max_hz;		/* max SPI frequency */
 
 	spinlock_t write_lock;
 	int write_pending;
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index d40010a22ecd..c111f36f5d21 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -16,9 +16,7 @@
  *    2/3 chan to port 1, 4/5 chan to port 3. Even number chans
  *    are used for RX, odd chans for TX
  *
- * 2. In A0 stepping, UART will not support TX half empty flag
- *
- * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
+ * 2. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
  *    asserted, only when the HW is reset the DDCD and DDSR will
  *    be triggered
  */
@@ -41,8 +39,6 @@
 #include <linux/io.h>
 #include <linux/debugfs.h>
 
-#define  MFD_HSU_A0_STEPPING	1
-
 #define HSU_DMA_BUF_SIZE	2048
 
 #define chan_readl(chan, offset)	readl(chan->reg + offset)
@@ -51,7 +47,10 @@
 #define mfd_readl(obj, offset)		readl(obj->reg + offset)
 #define mfd_writel(obj, offset, val)	writel(val, obj->reg + offset)
 
-#define HSU_DMA_TIMEOUT_CHECK_FREQ	(HZ/10)
+static int hsu_dma_enable;
+module_param(hsu_dma_enable, int, 0);
+MODULE_PARM_DESC(hsu_dma_enable, "It is a bitmap to set working mode, if \
+bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode.");
 
 struct hsu_dma_buffer {
 	u8		*buf;
@@ -65,7 +64,6 @@ struct hsu_dma_chan {
 	enum dma_data_direction	dirt;
 	struct uart_hsu_port	*uport;
 	void __iomem		*reg;
-	struct timer_list	rx_timer; /* only needed by RX channel */
 };
 
 struct uart_hsu_port {
@@ -355,8 +353,6 @@ void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf
 					 | (0x1 << 24)	/* timeout bit, see HSU Errata 1 */
 					 );
 	chan_writel(rxc, HSU_CH_CR, 0x3);
-
-	mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
 }
 
 /* Protected by spin_lock_irqsave(port->lock) */
@@ -420,7 +416,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
 		chan_writel(chan, HSU_CH_CR, 0x3);
 		return;
 	}
-	del_timer(&chan->rx_timer);
 
 	dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
 			dbuf->dma_size, DMA_FROM_DEVICE);
@@ -448,8 +443,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
 	tty_flip_buffer_push(tty);
 
 	chan_writel(chan, HSU_CH_CR, 0x3);
-	chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ;
-	add_timer(&chan->rx_timer);
 
 }
 
@@ -551,16 +544,9 @@ static void transmit_chars(struct uart_hsu_port *up)
 		return;
 	}
 
-#ifndef MFD_HSU_A0_STEPPING
+	/* The IRQ is for TX FIFO half-empty */
 	count = up->port.fifosize / 2;
-#else
-	/*
-	 * A0 only supports fully empty IRQ, and the first char written
-	 * into it won't clear the EMPT bit, so we may need be cautious
-	 * by useing a shorter buffer
-	 */
-	count = up->port.fifosize - 4;
-#endif
+
 	do {
 		serial_out(up, UART_TX, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -769,9 +755,8 @@ static void serial_hsu_break_ctl(struct uart_port *port, int break_state)
 /*
  * What special to do:
  * 1. chose the 64B fifo mode
- * 2. make sure not to select half empty mode for A0 stepping
- * 3. start dma or pio depends on configuration
- * 4. we only allocate dma memory when needed
+ * 2. start dma or pio depends on configuration
+ * 3. we only allocate dma memory when needed
  */
 static int serial_hsu_startup(struct uart_port *port)
 {
@@ -870,8 +855,6 @@ static void serial_hsu_shutdown(struct uart_port *port)
 		container_of(port, struct uart_hsu_port, port);
 	unsigned long flags;
 
-	del_timer_sync(&up->rxc->rx_timer);
-
 	/* Disable interrupts from this port */
 	up->ier = 0;
 	serial_out(up, UART_IER, 0);
@@ -977,10 +960,6 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
 		fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B;
 
 	fcr |= UART_FCR_HSU_64B_FIFO;
-#ifdef MFD_HSU_A0_STEPPING
-	/* A0 doesn't support half empty IRQ */
-	fcr |= UART_FCR_FULL_EMPT_TXI;
-#endif
 
 	/*
 	 * Ok, we're now changing the port state.  Do it with
@@ -1343,28 +1322,6 @@ err_disable:
 	return ret;
 }
 
-static void hsu_dma_rx_timeout(unsigned long data)
-{
-	struct hsu_dma_chan *chan = (void *)data;
-	struct uart_hsu_port *up = chan->uport;
-	struct hsu_dma_buffer *dbuf = &up-&