Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:
 "Highlights:

   - introduction of Dove thermal sensor driver.

   - introduction of Kirkwood thermal sensor driver.

   - introduction of intel_powerclamp thermal cooling device driver.

   - add interrupt and DT support for rcar thermal driver.

   - add thermal emulation support which allows platform thermal driver
     to do software/hardware emulation for thermal issues."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits)
  thermal: rcar: remove __devinitconst
  thermal: return an error on failure to register thermal class
  Thermal: rename thermal governor Kconfig option to avoid generic naming
  thermal: exynos: Use the new thermal trend type for quick cooling action.
  Thermal: exynos: Add support for temperature falling interrupt.
  Thermal: Dove: Add Themal sensor support for Dove.
  thermal: Add support for the thermal sensor on Kirkwood SoCs
  thermal: rcar: add Device Tree support
  thermal: rcar: remove machine_power_off() from rcar_thermal_notify()
  thermal: rcar: add interrupt support
  thermal: rcar: add read/write functions for common/priv data
  thermal: rcar: multi channel support
  thermal: rcar: use mutex lock instead of spin lock
  thermal: rcar: enable CPCTL to use hardware TSC deciding
  thermal: rcar: use parenthesis on macro
  Thermal: fix a build warning when CONFIG_THERMAL_EMULATION cleared
  Thermal: fix a wrong comment
  thermal: sysfs: Add a new sysfs node emul_temp for thermal emulation
  PM: intel_powerclamp: off by one in start_power_clamp()
  thermal: exynos: Miscellaneous fixes to support falling threshold interrupt
  ...

13 files changed, 1885 insertions, 265 deletions

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index c2c77d1ac499..a764f165b589 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -29,14 +29,14 @@ choice
 
 config THERMAL_DEFAULT_GOV_STEP_WISE
 	bool "step_wise"
-	select STEP_WISE
+	select THERMAL_GOV_STEP_WISE
 	help
 	  Use the step_wise governor as default. This throttles the
 	  devices one step at a time.
 
 config THERMAL_DEFAULT_GOV_FAIR_SHARE
 	bool "fair_share"
-	select FAIR_SHARE
+	select THERMAL_GOV_FAIR_SHARE
 	help
 	  Use the fair_share governor as default. This throttles the
 	  devices based on their 'contribution' to a zone. The
@@ -44,24 +44,24 @@ config THERMAL_DEFAULT_GOV_FAIR_SHARE
 
 config THERMAL_DEFAULT_GOV_USER_SPACE
 	bool "user_space"
-	select USER_SPACE
+	select THERMAL_GOV_USER_SPACE
 	help
 	  Select this if you want to let the user space manage the
 	  lpatform thermals.
 
 endchoice
 
-config FAIR_SHARE
+config THERMAL_GOV_FAIR_SHARE
 	bool "Fair-share thermal governor"
 	help
 	  Enable this to manage platform thermals using fair-share governor.
 
-config STEP_WISE
+config THERMAL_GOV_STEP_WISE
 	bool "Step_wise thermal governor"
 	help
 	  Enable this to manage platform thermals using a simple linear
 
-config USER_SPACE
+config THERMAL_GOV_USER_SPACE
 	bool "User_space thermal governor"
 	help
 	  Enable this to let the user space manage the platform thermals.
@@ -78,6 +78,14 @@ config CPU_THERMAL
 	  and not the ACPI interface.
 	  If you want this support, you should say Y here.
 
+config THERMAL_EMULATION
+	bool "Thermal emulation mode support"
+	help
+	  Enable this option to make a emul_temp sysfs node in thermal zone
+	  directory to support temperature emulation. With emulation sysfs node,
+	  user can manually input temperature and test the different trip
+	  threshold behaviour for simulation purpose.
+
 config SPEAR_THERMAL
 	bool "SPEAr thermal sensor driver"
 	depends on PLAT_SPEAR
@@ -93,6 +101,14 @@ config RCAR_THERMAL
 	  Enable this to plug the R-Car thermal sensor driver into the Linux
 	  thermal framework
 
+config KIRKWOOD_THERMAL
+	tristate "Temperature sensor on Marvell Kirkwood SoCs"
+	depends on ARCH_KIRKWOOD
+	depends on OF
+	help
+	  Support for the Kirkwood thermal sensor driver into the Linux thermal
+	  framework. Only kirkwood 88F6282 and 88F6283 have this sensor.
+
 config EXYNOS_THERMAL
 	tristate "Temperature sensor on Samsung EXYNOS"
 	depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
@@ -101,6 +117,23 @@ config EXYNOS_THERMAL
 	  If you say yes here you get support for TMU (Thermal Management
 	  Unit) on SAMSUNG EXYNOS series of SoC.
 
+config EXYNOS_THERMAL_EMUL
+	bool "EXYNOS TMU emulation mode support"
+	depends on EXYNOS_THERMAL
+	help
+	  Exynos 4412 and 4414 and 5 series has emulation mode on TMU.
+	  Enable this option will be make sysfs node in exynos thermal platform
+	  device directory to support emulation mode. With emulation mode sysfs
+	  node, you can manually input temperature to TMU for simulation purpose.
+
+config DOVE_THERMAL
+	tristate "Temperature sensor on Marvell Dove SoCs"
+	depends on ARCH_DOVE
+	depends on OF
+	help
+	  Support for the Dove thermal sensor driver in the Linux thermal
+	  framework.
+
 config DB8500_THERMAL
 	bool "DB8500 thermal management"
 	depends on ARCH_U8500
@@ -122,4 +155,14 @@ config DB8500_CPUFREQ_COOLING
 	  bound cpufreq cooling device turns active to set CPU frequency low to
 	  cool down the CPU.
 
+config INTEL_POWERCLAMP
+	tristate "Intel PowerClamp idle injection driver"
+	depends on THERMAL
+	depends on X86
+	depends on CPU_SUP_INTEL
+	help
+	  Enable this to enable Intel PowerClamp idle injection driver. This
+	  enforce idle time which results in more package C-state residency. The
+	  user interface is exposed via generic thermal framework.
+
 endif
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index d8da683245fc..d3a2b38c31e8 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -5,9 +5,9 @@
 obj-$(CONFIG_THERMAL)		+= thermal_sys.o
 
 # governors
-obj-$(CONFIG_FAIR_SHARE)	+= fair_share.o
-obj-$(CONFIG_STEP_WISE)		+= step_wise.o
-obj-$(CONFIG_USER_SPACE)	+= user_space.o
+obj-$(CONFIG_THERMAL_GOV_FAIR_SHARE)	+= fair_share.o
+obj-$(CONFIG_THERMAL_GOV_STEP_WISE)	+= step_wise.o
+obj-$(CONFIG_THERMAL_GOV_USER_SPACE)	+= user_space.o
 
 # cpufreq cooling
 obj-$(CONFIG_CPU_THERMAL)	+= cpu_cooling.o
@@ -15,6 +15,10 @@ obj-$(CONFIG_CPU_THERMAL)	+= cpu_cooling.o
 # platform thermal drivers
 obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
 obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
+obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
 obj-$(CONFIG_EXYNOS_THERMAL)	+= exynos_thermal.o
+obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
 obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
 obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
+obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
+
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index c33fa5315d6b..8dc44cbb3e09 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -111,8 +111,8 @@ static int is_cpufreq_valid(int cpu)
 /**
  * get_cpu_frequency - get the absolute value of frequency from level.
  * @cpu: cpu for which frequency is fetched.
- * @level: level of frequency of the CPU
- *	e.g level=1 --> 1st MAX FREQ, LEVEL=2 ---> 2nd MAX FREQ, .... etc
+ * @level: level of frequency, equals cooling state of cpu cooling device
+ *	e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc
  */
 static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level)
 {
diff --git a/drivers/thermal/db8500_cpufreq_cooling.c b/drivers/thermal/db8500_cpufreq_cooling.c
index 4cf8e72af90a..21419851fc02 100644
--- a/drivers/thermal/db8500_cpufreq_cooling.c
+++ b/drivers/thermal/db8500_cpufreq_cooling.c
@@ -21,6 +21,7 @@
 #include <linux/cpufreq.h>
 #include <linux/err.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
@@ -73,15 +74,13 @@ static const struct of_device_id db8500_cpufreq_cooling_match[] = {
 	{ .compatible = "stericsson,db8500-cpufreq-cooling" },
 	{},
 };
-#else
-#define db8500_cpufreq_cooling_match NULL
 #endif
 
 static struct platform_driver db8500_cpufreq_cooling_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
 		.name = "db8500-cpufreq-cooling",
-		.of_match_table = db8500_cpufreq_cooling_match,
+		.of_match_table = of_match_ptr(db8500_cpufreq_cooling_match),
 	},
 	.probe = db8500_cpufreq_cooling_probe,
 	.suspend = db8500_cpufreq_cooling_suspend,
diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c
index ec71ade3e317..61ce60a35921 100644
--- a/drivers/thermal/db8500_thermal.c
+++ b/drivers/thermal/db8500_thermal.c
@@ -508,15 +508,13 @@ static const struct of_device_id db8500_thermal_match[] = {
 	{ .compatible = "stericsson,db8500-thermal" },
 	{},
 };
-#else
-#define db8500_thermal_match NULL
 #endif
 
 static struct platform_driver db8500_thermal_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
 		.name = "db8500-thermal",
-		.of_match_table = db8500_thermal_match,
+		.of_match_table = of_match_ptr(db8500_thermal_match),
 	},
 	.probe = db8500_thermal_probe,
 	.suspend = db8500_thermal_suspend,
diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c
new file mode 100644
index 000000000000..7b0bfa0e7a9c
--- /dev/null
+++ b/drivers/thermal/dove_thermal.c
@@ -0,0 +1,209 @@
+/*
+ * Dove thermal sensor driver
+ *
+ * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#define DOVE_THERMAL_TEMP_OFFSET	1
+#define DOVE_THERMAL_TEMP_MASK		0x1FF
+
+/* Dove Thermal Manager Control and Status Register */
+#define PMU_TM_DISABLE_OFFS		0
+#define PMU_TM_DISABLE_MASK		(0x1 << PMU_TM_DISABLE_OFFS)
+
+/* Dove Theraml Diode Control 0 Register */
+#define PMU_TDC0_SW_RST_MASK		(0x1 << 1)
+#define PMU_TDC0_SEL_VCAL_OFFS		5
+#define PMU_TDC0_SEL_VCAL_MASK		(0x3 << PMU_TDC0_SEL_VCAL_OFFS)
+#define PMU_TDC0_REF_CAL_CNT_OFFS	11
+#define PMU_TDC0_REF_CAL_CNT_MASK	(0x1FF << PMU_TDC0_REF_CAL_CNT_OFFS)
+#define PMU_TDC0_AVG_NUM_OFFS		25
+#define PMU_TDC0_AVG_NUM_MASK		(0x7 << PMU_TDC0_AVG_NUM_OFFS)
+
+/* Dove Thermal Diode Control 1 Register */
+#define PMU_TEMP_DIOD_CTRL1_REG		0x04
+#define PMU_TDC1_TEMP_VALID_MASK	(0x1 << 10)
+
+/* Dove Thermal Sensor Dev Structure */
+struct dove_thermal_priv {
+	void __iomem *sensor;
+	void __iomem *control;
+};
+
+static int dove_init_sensor(const struct dove_thermal_priv *priv)
+{
+	u32 reg;
+	u32 i;
+
+	/* Configure the Diode Control Register #0 */
+	reg = readl_relaxed(priv->control);
+
+	/* Use average of 2 */
+	reg &= ~PMU_TDC0_AVG_NUM_MASK;
+	reg |= (0x1 << PMU_TDC0_AVG_NUM_OFFS);
+
+	/* Reference calibration value */
+	reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
+	reg |= (0x0F1 << PMU_TDC0_REF_CAL_CNT_OFFS);
+
+	/* Set the high level reference for calibration */
+	reg &= ~PMU_TDC0_SEL_VCAL_MASK;
+	reg |= (0x2 << PMU_TDC0_SEL_VCAL_OFFS);
+	writel(reg, priv->control);
+
+	/* Reset the sensor */
+	reg = readl_relaxed(priv->control);
+	writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
+	writel(reg, priv->control);
+
+	/* Enable the sensor */
+	reg = readl_relaxed(priv->sensor);
+	reg &= ~PMU_TM_DISABLE_MASK;
+	writel(reg, priv->sensor);
+
+	/* Poll the sensor for the first reading */
+	for (i = 0; i < 1000000; i++) {
+		reg = readl_relaxed(priv->sensor);
+		if (reg & DOVE_THERMAL_TEMP_MASK)
+			break;
+	}
+
+	if (i == 1000000)
+		return -EIO;
+
+	return 0;
+}
+
+static int dove_get_temp(struct thermal_zone_device *thermal,
+			  unsigned long *temp)
+{
+	unsigned long reg;
+	struct dove_thermal_priv *priv = thermal->devdata;
+
+	/* Valid check */
+	reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG);
+	if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0) {
+		dev_err(&thermal->device,
+			"Temperature sensor reading not valid\n");
+		return -EIO;
+	}
+
+	/*
+	 * Calculate temperature. See Section 8.10.1 of 88AP510,
+	 * Documentation/arm/Marvell/README
+	 */
+	reg = readl_relaxed(priv->sensor);
+	reg = (reg >> DOVE_THERMAL_TEMP_OFFSET) & DOVE_THERMAL_TEMP_MASK;
+	*temp = ((2281638UL - (7298*reg)) / 10);
+
+	return 0;
+}
+
+static struct thermal_zone_device_ops ops = {
+	.get_temp = dove_get_temp,
+};
+
+static const struct of_device_id dove_thermal_id_table[] = {
+	{ .compatible = "marvell,dove-thermal" },
+	{}
+};
+
+static int dove_thermal_probe(struct platform_device *pdev)
+{
+	struct thermal_zone_device *thermal = NULL;
+	struct dove_thermal_priv *priv;
+	struct resource *res;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get platform resource\n");
+		return -ENODEV;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->sensor = devm_request_and_ioremap(&pdev->dev, res);
+	if (!priv->sensor) {
+		dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
+		return -EADDRNOTAVAIL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get platform resource\n");
+		return -ENODEV;
+	}
+	priv->control = devm_request_and_ioremap(&pdev->dev, res);
+	if (!priv->control) {
+		dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
+		return -EADDRNOTAVAIL;
+	}
+
+	ret = dove_init_sensor(priv);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize sensor\n");
+		return ret;
+	}
+
+	thermal = thermal_zone_device_register("dove_thermal", 0, 0,
+					       priv, &ops, NULL, 0, 0);
+	if (IS_ERR(thermal)) {
+		dev_err(&pdev->dev,
+			"Failed to register thermal zone device\n");
+		return PTR_ERR(thermal);
+	}
+
+	platform_set_drvdata(pdev, thermal);
+
+	return 0;
+}
+
+static int dove_thermal_exit(struct platform_device *pdev)
+{
+	struct thermal_zone_device *dove_thermal =
+		platform_get_drvdata(pdev);
+
+	thermal_zone_device_unregister(dove_thermal);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+MODULE_DEVICE_TABLE(of, dove_thermal_id_table);
+
+static struct platform_driver dove_thermal_driver = {
+	.probe = dove_thermal_probe,
+	.remove = dove_thermal_exit,
+	.driver = {
+		.name = "dove_thermal",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(dove_thermal_id_table),
+	},
+};
+
+module_platform_driver(dove_thermal_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_DESCRIPTION("Dove thermal driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
index bada1308318b..e04ebd8671ac 100644
--- a/drivers/thermal/exynos_thermal.c
+++ b/drivers/thermal/exynos_thermal.c
@@ -82,7 +82,7 @@
 
 #define EXYNOS_TRIMINFO_RELOAD		0x1
 #define EXYNOS_TMU_CLEAR_RISE_INT	0x111
-#define EXYNOS_TMU_CLEAR_FALL_INT	(0x111 << 16)
+#define EXYNOS_TMU_CLEAR_FALL_INT	(0x111 << 12)
 #define EXYNOS_MUX_ADDR_VALUE		6
 #define EXYNOS_MUX_ADDR_SHIFT		20
 #define EXYNOS_TMU_TRIP_MODE_SHIFT	13
@@ -94,11 +94,20 @@
 #define SENSOR_NAME_LEN	16
 #define MAX_TRIP_COUNT	8
 #define MAX_COOLING_DEVICE 4
+#define MAX_THRESHOLD_LEVS 4
 
 #define ACTIVE_INTERVAL 500
 #define IDLE_INTERVAL 10000
 #define MCELSIUS	1000
 
+#ifdef CONFIG_EXYNOS_THERMAL_EMUL
+#define EXYNOS_EMUL_TIME	0x57F0
+#define EXYNOS_EMUL_TIME_SHIFT	16
+#define EXYNOS_EMUL_DATA_SHIFT	8
+#define EXYNOS_EMUL_DATA_MASK	0xFF
+#define EXYNOS_EMUL_ENABLE	0x1
+#endif /* CONFIG_EXYNOS_THERMAL_EMUL */
+
 /* CPU Zone information */
 #define PANIC_ZONE      4
 #define WARN_ZONE       3
@@ -125,6 +134,7 @@ struct exynos_tmu_data {
 struct	thermal_trip_point_conf {
 	int trip_val[MAX_TRIP_COUNT];
 	int trip_count;
+	u8 trigger_falling;
 };
 
 struct	thermal_cooling_conf {
@@ -174,7 +184,8 @@ static int exynos_set_mode(struct thermal_zone_device *thermal,
 
 	mutex_lock(&th_zone->therm_dev->lock);
 
-	if (mode == THERMAL_DEVICE_ENABLED)
+	if (mode == THERMAL_DEVICE_ENABLED &&
+		!th_zone->sensor_conf->trip_data.trigger_falling)
 		th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
 	else
 		th_zone->therm_dev->polling_delay = 0;
@@ -284,7 +295,7 @@ static int exynos_bind(struct thermal_zone_device *thermal,
 		case MONITOR_ZONE:
 		case WARN_ZONE:
 			if (thermal_zone_bind_cooling_device(thermal, i, cdev,
-								level, level)) {
+								level, 0)) {
 				pr_err("error binding cdev inst %d\n", i);
 				ret = -EINVAL;
 			}
@@ -362,10 +373,17 @@ static int exynos_get_temp(struct thermal_zone_device *thermal,
 static int exynos_get_trend(struct thermal_zone_device *thermal,
 			int trip, enum thermal_trend *trend)
 {
-	if (thermal->temperature >= trip)
-		*trend = THERMAL_TREND_RAISING;
+	int ret;
+	unsigned long trip_temp;
+
+	ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
+	if (ret < 0)
+		return ret;
+
+	if (thermal->temperature >= trip_temp)
+		*trend = THERMAL_TREND_RAISE_FULL;
 	else
-		*trend = THERMAL_TREND_DROPPING;
+		*trend = THERMAL_TREND_DROP_FULL;
 
 	return 0;
 }
@@ -413,7 +431,8 @@ static void exynos_report_trigger(void)
 			break;
 	}
 
-	if (th_zone->mode == THERMAL_DEVICE_ENABLED) {
+	if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
+		!th_zone->sensor_conf->trip_data.trigger_falling) {
 		if (i > 0)
 			th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
 		else
@@ -452,7 +471,8 @@ static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
 
 	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
 			EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
-			IDLE_INTERVAL);
+			sensor_conf->trip_data.trigger_falling ?
+			0 : IDLE_INTERVAL);
 
 	if (IS_ERR(th_zone->therm_dev)) {
 		pr_err("Failed to register thermal zone device\n");
@@ -559,8 +579,9 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	struct exynos_tmu_platform_data *pdata = data->pdata;
-	unsigned int status, trim_info, rising_threshold;
-	int ret = 0, threshold_code;
+	unsigned int status, trim_info;
+	unsigned int rising_threshold = 0, falling_threshold = 0;
+	int ret = 0, threshold_code, i, trigger_levs = 0;
 
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
@@ -585,6 +606,11 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 			(data->temp_error2 != 0))
 		data->temp_error1 = pdata->efuse_value;
 
+	/* Count trigger levels to be enabled */
+	for (i = 0; i < MAX_THRESHOLD_LEVS; i++)
+		if (pdata->trigger_levels[i])
+			trigger_levs++;
+
 	if (data->soc == SOC_ARCH_EXYNOS4210) {
 		/* Write temperature code for threshold */
 		threshold_code = temp_to_code(data, pdata->threshold);
@@ -594,44 +620,38 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 		}
 		writeb(threshold_code,
 			data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
-
-		writeb(pdata->trigger_levels[0],
-			data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0);
-		writeb(pdata->trigger_levels[1],
-			data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL1);
-		writeb(pdata->trigger_levels[2],
-			data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL2);
-		writeb(pdata->trigger_levels[3],
-			data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL3);
+		for (i = 0; i < trigger_levs; i++)
+			writeb(pdata->trigger_levels[i],
+			data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
 
 		writel(EXYNOS4210_TMU_INTCLEAR_VAL,
 			data->base + EXYNOS_TMU_REG_INTCLEAR);
 	} else if (data->soc == SOC_ARCH_EXYNOS) {
-		/* Write temperature code for threshold */
-		threshold_code = temp_to_code(data, pdata->trigger_levels[0]);
-		if (threshold_code < 0) {
-			ret = threshold_code;
-			goto out;
-		}
-		rising_threshold = threshold_code;
-		threshold_code = temp_to_code(data, pdata->trigger_levels[1]);
-		if (threshold_code < 0) {
-			ret = threshold_code;
-			goto out;
-		}
-		rising_threshold |= (threshold_code << 8);
-		threshold_code = temp_to_code(data, pdata->trigger_levels[2]);
-		if (threshold_code < 0) {
-			ret = threshold_code;
-			goto out;
+		/* Write temperature code for rising and falling threshold */
+		for (i = 0; i < trigger_levs; i++) {
+			threshold_code = temp_to_code(data,
+						pdata->trigger_levels[i]);
+			if (threshold_code < 0) {
+				ret = threshold_code;
+				goto out;
+			}
+			rising_threshold |= threshold_code << 8 * i;
+			if (pdata->threshold_falling) {
+				threshold_code = temp_to_code(data,
+						pdata->trigger_levels[i] -
+						pdata->threshold_falling);
+				if (threshold_code > 0)
+					falling_threshold |=
+						threshold_code << 8 * i;
+			}
 		}
-		rising_threshold |= (threshold_code << 16);
 
 		writel(rising_threshold,
 				data->base + EXYNOS_THD_TEMP_RISE);
-		writel(0, data->base + EXYNOS_THD_TEMP_FALL);
+		writel(falling_threshold,
+				data->base + EXYNOS_THD_TEMP_FALL);
 
-		writel(EXYNOS_TMU_CLEAR_RISE_INT|EXYNOS_TMU_CLEAR_FALL_INT,
+		writel(EXYNOS_TMU_CLEAR_RISE_INT | EXYNOS_TMU_CLEAR_FALL_INT,
 				data->base + EXYNOS_TMU_REG_INTCLEAR);
 	}
 out:
@@ -664,6 +684,8 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
 			pdata->trigger_level2_en << 8 |
 			pdata->trigger_level1_en << 4 |
 			pdata->trigger_level0_en;
+		if (pdata->threshold_falling)
+			interrupt_en |= interrupt_en << 16;
 	} else {
 		con |= EXYNOS_TMU_CORE_OFF;
 		interrupt_en = 0; /* Disable all interrupts */
@@ -697,20 +719,19 @@ static void exynos_tmu_work(struct work_struct *work)
 	struct exynos_tmu_data *data = container_of(work,
 			struct exynos_tmu_data, irq_work);
 
+	exynos_report_trigger();
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
-
-
 	if (data->soc == SOC_ARCH_EXYNOS)
-		writel(EXYNOS_TMU_CLEAR_RISE_INT,
+		writel(EXYNOS_TMU_CLEAR_RISE_INT |
+				EXYNOS_TMU_CLEAR_FALL_INT,
 				data->base + EXYNOS_TMU_REG_INTCLEAR);
 	else
 		writel(EXYNOS4210_TMU_INTCLEAR_VAL,
 				data->base + EXYNOS_TMU_REG_INTCLEAR);
-
 	clk_disable(data->clk);
 	mutex_unlock(&data->lock);
-	exynos_report_trigger();
+
 	enable_irq(data->irq);
 }
 
@@ -759,6 +780,7 @@ static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
 
 #if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
 static struct exynos_tmu_platform_data const exynos_default_tmu_data = {
+	.threshold_falling = 10,
 	.trigger_levels[0] = 85,
 	.trigger_levels[1] = 103,
 	.trigger_levels[2] = 110,
@@ -800,8 +822,6 @@ static const struct of_device_id exynos_tmu_match[] = {
 	{},
 };
 MODULE_DEVICE_TABLE(of, exynos_tmu_match);
-#else
-#define  exynos_tmu_match NULL
 #endif
 
 static struct platform_device_id exynos_tmu_driver_ids[] = {
@@ -832,6 +852,94 @@ static inline struct  exynos_tmu_platform_data *exynos_get_driver_data(
 	return (struct exynos_tmu_platform_data *)
 			platform_get_device_id(pdev)->driver_data;
 }
+
+#ifdef CONFIG_EXYNOS_THERMAL_EMUL
+static ssize_t exynos_tmu_emulation_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct platform_device *pdev = container_of(dev,
+					struct platform_device, dev);
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	unsigned int reg;
+	u8 temp_code;
+	int temp = 0;
+
+	if (data->soc == SOC_ARCH_EXYNOS4210)
+		goto out;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+	reg = readl(data->base + EXYNOS_EMUL_CON);
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+
+	if (reg & EXYNOS_EMUL_ENABLE) {
+		reg >>= EXYNOS_EMUL_DATA_SHIFT;
+		temp_code = reg & EXYNOS_EMUL_DATA_MASK;
+		temp = code_to_temp(data, temp_code);
+	}
+out:
+	return sprintf(buf, "%d\n", temp * MCELSIUS);
+}
+
+static ssize_t exynos_tmu_emulation_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct platform_device *pdev = container_of(dev,
+					struct platform_device, dev);
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	unsigned int reg;
+	int temp;
+
+	if (data->soc == SOC_ARCH_EXYNOS4210)
+		goto out;
+
+	if (!sscanf(buf, "%d\n", &temp) || temp < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	reg = readl(data->base + EXYNOS_EMUL_CON);
+
+	if (temp) {
+		/* Both CELSIUS and MCELSIUS type are available for input */
+		if (temp > MCELSIUS)
+			temp /= MCELSIUS;
+
+		reg = (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT) |
+			(temp_to_code(data, (temp / MCELSIUS))
+			 << EXYNOS_EMUL_DATA_SHIFT) | EXYNOS_EMUL_ENABLE;
+	} else {
+		reg &= ~EXYNOS_EMUL_ENABLE;
+	}
+
+	writel(reg, data->base + EXYNOS_EMUL_CON);
+
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+
+out:
+	return count;
+}
+
+static DEVICE_ATTR(emulation, 0644, exynos_tmu_emulation_show,
+					exynos_tmu_emulation_store);
+static int create_emulation_sysfs(struct device *dev)
+{
+	return device_create_file(dev, &dev_attr_emulation);
+}
+static void remove_emulation_sysfs(struct device *dev)
+{
+	device_remove_file(dev, &dev_attr_emulation);
+}
+#else
+static inline int create_emulation_sysfs(struct device *dev) { return 0; }
+static inline void remove_emulation_sysfs(struct device *dev) {}
+#endif
+
 static int exynos_tmu_probe(struct platform_device *pdev)
 {
 	struct exynos_tmu_data *data;
@@ -914,6 +1022,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 		exynos_sensor_conf.trip_data.trip_val[i] =
 			pdata->threshold + pdata->trigger_levels[i];
 
+	exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling;
+
 	exynos_sensor_conf.cooling_data.freq_clip_count =
 						pdata->freq_tab_count;
 	for (i = 0; i < pdata->freq_tab_count; i++) {
@@ -928,6 +1038,11 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Failed to register thermal interface\n");
 		goto err_clk;
 	}
+
+	ret = create_emulation_sysfs(&pdev->dev);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to create emulation mode sysfs node\n");
+
 	return 0;
 err_clk:
 	platform_set_drvdata(pdev, NULL);
@@ -939,6 +1054,8 @@ static int exynos_tmu_remove(struct platform_device *pdev)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 
+	remove_emulation_sysfs(&pdev->dev);
+
 	exynos_tmu_control(pdev, false);
 
 	exynos_unregister_thermal();
@@ -980,7 +1097,7 @@ static struct platform_driver exynos_tmu_driver = {
 		.name   = "exynos-tmu",
 		.owner  = THIS_MODULE,
 		.pm     = EXYNOS_TMU_PM,
-		.of_match_table = exynos_tmu_match,
+		.of_match_table = of_match_ptr(exynos_tmu_match),
 	},
 	.probe = exynos_tmu_probe,
 	.remove	= exynos_tmu_remove,
diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c
new file mode 100644
index 000000000000..ab3ed907d2c3
--- /dev/null
+++ b/drivers/thermal/intel_powerclamp.c
@@ -0,0 +1,794 @@
+/*
+ * intel_powerclamp.c - package c-state idle injection
+ *
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * Authors:
+ *     Arjan van de Ven <arjan@linux.intel.com>
+ *     Jacob Pan <jacob.jun.pan@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *
+ *	TODO:
+ *           1. better handle wakeup from external interrupts, currently a fixed
+ *              compensation is added to clamping duration when excessive amount
+ *              of wakeups are observed during idle time. the reason is that in
+ *              case of external interrupts without need for ack, clamping down
+ *              cpu in non-irq context does not reduce irq. for majority of the
+ *              cases, clamping down cpu does help reduce irq as well, we should
+ *              be able to differenciate the two cases and give a quantitative
+ *              solution for the irqs that we can control. perhaps based on
+ *              get_cpu_iowait_time_us()
+ *
+ *	     2. synchronization with other hw blocks
+ *
+ *
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/cpu.h>
+#include <linux/thermal.h>
+#include <linux/slab.h>
+#include <linux/tick.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <asm/nmi.h>
+#include <asm/msr.h>
+#include <asm/mwait.h>
+#include <asm/cpu_device_id.h>
+#include <asm/idle.h>
+#include <asm/hardirq.h>
+
+#define MAX_TARGET_RATIO (50U)
+/* For each undisturbed clamping period (no extra wake ups during idle time),
+ * we increment the confidence counter for the given target ratio.
+ * CONFIDENCE_OK defines the level where runtime calibration results are
+ * valid.
+ */
+#define CONFIDENCE_OK (3)
+/* Default idle injection duration, driver adjust sleep time to meet target
+ * idle ratio. Similar to frequency modulation.
+ */
+#define DEFAULT_DURATION_JIFFIES (6)
+
+static unsigned int target_mwait;
+static struct dentry *debug_dir;
+
+/* user selected target */
+static unsigned int set_target_ratio;
+static unsigned int current_ratio;
+static bool should_skip;
+static bool reduce_irq;
+static atomic_t idle_wakeup_counter;
+static unsigned int control_cpu; /* The cpu assigned to collect stat and update
+				  * control parameters. default to BSP but BSP
+				  * can be offlined.
+				  */
+static bool clamping;
+
+
+static struct task_struct * __percpu *powerclamp_thread;
+static struct thermal_cooling_device *cooling_dev;
+static unsigned long *cpu_clamping_mask;  /* bit map for tracking per cpu
+					   * clamping thread
+					   */
+
+static unsigned int duration;
+static unsigned int pkg_cstate_ratio_cur;
+static unsigned int window_size;
+
+static int duration_set(const char *arg, const struct kernel_param *kp)
+{
+	int ret = 0;
+	unsigned long new_duration;
+
+	ret = kstrtoul(arg, 10, &new_duration);
+	if (ret)
+		goto exit;
+	if (new_duration > 25 || new_duration < 6) {
+		pr_err("Out of recommended range %lu, between 6-25ms\n",
+			new_duration);
+		ret = -EINVAL;
+	}
+
+	duration = clamp(new_duration, 6ul, 25ul);
+	smp_mb();
+
+exit:
+
+	return ret;
+}
+
+static struct kernel_param_ops duration_ops = {
+	.set = duration_set,
+	.get = param_get_int,
+};
+
+
+module_param_cb(duration, &duration_ops, &duration, 0644);
+MODULE_PARM_DESC(duration, "forced idle time for each attempt in msec.");
+
+struct powerclamp_calibration_data {
+	unsig