diff options
author | Doug Ledford <dledford@redhat.com> | 2016-02-03 11:10:58 -0500 |
---|---|---|
committer | Doug Ledford <dledford@redhat.com> | 2016-02-03 11:10:58 -0500 |
commit | b85d9905a7ca128f24e3a4e60ff2a1b0cd58ae7c (patch) | |
tree | 1c499fa47a01d4a44425c9929f2cc0fd5baf2ea0 /drivers/staging | |
parent | e581d111dad3781266ae1abe1d2848e69406deb5 (diff) |
staging/rdma: remove deprecated ipath driver
This driver was moved to staging for eventual deletion. Time
to complete that task.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Diffstat (limited to 'drivers/staging')
40 files changed, 0 insertions, 30434 deletions
diff --git a/drivers/staging/rdma/Kconfig b/drivers/staging/rdma/Kconfig index 8a0be6961d7a..f1f3ecadf0fb 100644 --- a/drivers/staging/rdma/Kconfig +++ b/drivers/staging/rdma/Kconfig @@ -24,6 +24,4 @@ if STAGING_RDMA source "drivers/staging/rdma/hfi1/Kconfig" -source "drivers/staging/rdma/ipath/Kconfig" - endif diff --git a/drivers/staging/rdma/Makefile b/drivers/staging/rdma/Makefile index 08e1919c819e..8c7fc1de48a7 100644 --- a/drivers/staging/rdma/Makefile +++ b/drivers/staging/rdma/Makefile @@ -1,3 +1,2 @@ # Entries for RDMA_STAGING tree obj-$(CONFIG_INFINIBAND_HFI1) += hfi1/ -obj-$(CONFIG_INFINIBAND_IPATH) += ipath/ diff --git a/drivers/staging/rdma/ipath/Kconfig b/drivers/staging/rdma/ipath/Kconfig deleted file mode 100644 index 041ce0634968..000000000000 --- a/drivers/staging/rdma/ipath/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -config INFINIBAND_IPATH - tristate "QLogic HTX HCA support" - depends on 64BIT && NET && HT_IRQ - ---help--- - This is a driver for the deprecated QLogic Hyper-Transport - IB host channel adapter (model QHT7140), - including InfiniBand verbs support. This driver allows these - devices to be used with both kernel upper level protocols such - as IP-over-InfiniBand as well as with userspace applications - (in conjunction with InfiniBand userspace access). - For QLogic PCIe QLE based cards, use the QIB driver instead. - - If you have this hardware you will need to boot with PAT disabled - on your x86-64 systems, use the nopat kernel parameter. - - Note that this driver will soon be removed entirely from the kernel. diff --git a/drivers/staging/rdma/ipath/Makefile b/drivers/staging/rdma/ipath/Makefile deleted file mode 100644 index 4496f2820c92..000000000000 --- a/drivers/staging/rdma/ipath/Makefile +++ /dev/null @@ -1,37 +0,0 @@ -ccflags-y := -DIPATH_IDSTR='"QLogic kernel.org driver"' \ - -DIPATH_KERN_TYPE=0 - -obj-$(CONFIG_INFINIBAND_IPATH) += ib_ipath.o - -ib_ipath-y := \ - ipath_cq.o \ - ipath_diag.o \ - ipath_dma.o \ - ipath_driver.o \ - ipath_eeprom.o \ - ipath_file_ops.o \ - ipath_fs.o \ - ipath_init_chip.o \ - ipath_intr.o \ - ipath_keys.o \ - ipath_mad.o \ - ipath_mmap.o \ - ipath_mr.o \ - ipath_qp.o \ - ipath_rc.o \ - ipath_ruc.o \ - ipath_sdma.o \ - ipath_srq.o \ - ipath_stats.o \ - ipath_sysfs.o \ - ipath_uc.o \ - ipath_ud.o \ - ipath_user_pages.o \ - ipath_user_sdma.o \ - ipath_verbs_mcast.o \ - ipath_verbs.o - -ib_ipath-$(CONFIG_HT_IRQ) += ipath_iba6110.o - -ib_ipath-$(CONFIG_X86_64) += ipath_wc_x86_64.o -ib_ipath-$(CONFIG_PPC64) += ipath_wc_ppc64.o diff --git a/drivers/staging/rdma/ipath/TODO b/drivers/staging/rdma/ipath/TODO deleted file mode 100644 index cb00158d64c8..000000000000 --- a/drivers/staging/rdma/ipath/TODO +++ /dev/null @@ -1,5 +0,0 @@ -The ipath driver has been moved to staging in preparation for its removal in a -few releases. The driver will be deleted during the 4.6 merge window. - -Contact Dennis Dalessandro <dennis.dalessandro@intel.com> and -Cc: linux-rdma@vger.kernel.org diff --git a/drivers/staging/rdma/ipath/ipath_common.h b/drivers/staging/rdma/ipath/ipath_common.h deleted file mode 100644 index 28cfe97cf1e9..000000000000 --- a/drivers/staging/rdma/ipath/ipath_common.h +++ /dev/null @@ -1,851 +0,0 @@ -/* - * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved. - * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#ifndef _IPATH_COMMON_H -#define _IPATH_COMMON_H - -/* - * This file contains defines, structures, etc. that are used - * to communicate between kernel and user code. - */ - - -/* This is the IEEE-assigned OUI for QLogic Inc. InfiniPath */ -#define IPATH_SRC_OUI_1 0x00 -#define IPATH_SRC_OUI_2 0x11 -#define IPATH_SRC_OUI_3 0x75 - -/* version of protocol header (known to chip also). In the long run, - * we should be able to generate and accept a range of version numbers; - * for now we only accept one, and it's compiled in. - */ -#define IPS_PROTO_VERSION 2 - -/* - * These are compile time constants that you may want to enable or disable - * if you are trying to debug problems with code or performance. - * IPATH_VERBOSE_TRACING define as 1 if you want additional tracing in - * fastpath code - * IPATH_TRACE_REGWRITES define as 1 if you want register writes to be - * traced in faspath code - * _IPATH_TRACING define as 0 if you want to remove all tracing in a - * compilation unit - * _IPATH_DEBUGGING define as 0 if you want to remove debug prints - */ - -/* - * The value in the BTH QP field that InfiniPath uses to differentiate - * an infinipath protocol IB packet vs standard IB transport - */ -#define IPATH_KD_QP 0x656b79 - -/* - * valid states passed to ipath_set_linkstate() user call - */ -#define IPATH_IB_LINKDOWN 0 -#define IPATH_IB_LINKARM 1 -#define IPATH_IB_LINKACTIVE 2 -#define IPATH_IB_LINKDOWN_ONLY 3 -#define IPATH_IB_LINKDOWN_SLEEP 4 -#define IPATH_IB_LINKDOWN_DISABLE 5 -#define IPATH_IB_LINK_LOOPBACK 6 /* enable local loopback */ -#define IPATH_IB_LINK_EXTERNAL 7 /* normal, disable local loopback */ -#define IPATH_IB_LINK_NO_HRTBT 8 /* disable Heartbeat, e.g. for loopback */ -#define IPATH_IB_LINK_HRTBT 9 /* enable heartbeat, normal, non-loopback */ - -/* - * These 3 values (SDR and DDR may be ORed for auto-speed - * negotiation) are used for the 3rd argument to path_f_set_ib_cfg - * with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They - * are also the the possible values for ipath_link_speed_enabled and active - * The values were chosen to match values used within the IB spec. - */ -#define IPATH_IB_SDR 1 -#define IPATH_IB_DDR 2 - -/* - * stats maintained by the driver. For now, at least, this is global - * to all minor devices. - */ -struct infinipath_stats { - /* number of interrupts taken */ - __u64 sps_ints; - /* number of interrupts for errors */ - __u64 sps_errints; - /* number of errors from chip (not incl. packet errors or CRC) */ - __u64 sps_errs; - /* number of packet errors from chip other than CRC */ - __u64 sps_pkterrs; - /* number of packets with CRC errors (ICRC and VCRC) */ - __u64 sps_crcerrs; - /* number of hardware errors reported (parity, etc.) */ - __u64 sps_hwerrs; - /* number of times IB link changed state unexpectedly */ - __u64 sps_iblink; - __u64 sps_unused; /* was fastrcvint, no longer implemented */ - /* number of kernel (port0) packets received */ - __u64 sps_port0pkts; - /* number of "ethernet" packets sent by driver */ - __u64 sps_ether_spkts; - /* number of "ethernet" packets received by driver */ - __u64 sps_ether_rpkts; - /* number of SMA packets sent by driver. Obsolete. */ - __u64 sps_sma_spkts; - /* number of SMA packets received by driver. Obsolete. */ - __u64 sps_sma_rpkts; - /* number of times all ports rcvhdrq was full and packet dropped */ - __u64 sps_hdrqfull; - /* number of times all ports egrtid was full and packet dropped */ - __u64 sps_etidfull; - /* - * number of times we tried to send from driver, but no pio buffers - * avail - */ - __u64 sps_nopiobufs; - /* number of ports currently open */ - __u64 sps_ports; - /* list of pkeys (other than default) accepted (0 means not set) */ - __u16 sps_pkeys[4]; - __u16 sps_unused16[4]; /* available; maintaining compatible layout */ - /* number of user ports per chip (not IB ports) */ - __u32 sps_nports; - /* not our interrupt, or already handled */ - __u32 sps_nullintr; - /* max number of packets handled per receive call */ - __u32 sps_maxpkts_call; - /* avg number of packets handled per receive call */ - __u32 sps_avgpkts_call; - /* total number of pages locked */ - __u64 sps_pagelocks; - /* total number of pages unlocked */ - __u64 sps_pageunlocks; - /* - * Number of packets dropped in kernel other than errors (ether - * packets if ipath not configured, etc.) - */ - __u64 sps_krdrops; - __u64 sps_txeparity; /* PIO buffer parity error, recovered */ - /* pad for future growth */ - __u64 __sps_pad[45]; -}; - -/* - * These are the status bits readable (in ascii form, 64bit value) - * from the "status" sysfs file. - */ -#define IPATH_STATUS_INITTED 0x1 /* basic initialization done */ -#define IPATH_STATUS_DISABLED 0x2 /* hardware disabled */ -/* Device has been disabled via admin request */ -#define IPATH_STATUS_ADMIN_DISABLED 0x4 -/* Chip has been found and initted */ -#define IPATH_STATUS_CHIP_PRESENT 0x20 -/* IB link is at ACTIVE, usable for data traffic */ -#define IPATH_STATUS_IB_READY 0x40 -/* link is configured, LID, MTU, etc. have been set */ -#define IPATH_STATUS_IB_CONF 0x80 -/* no link established, probably no cable */ -#define IPATH_STATUS_IB_NOCABLE 0x100 -/* A Fatal hardware error has occurred. */ -#define IPATH_STATUS_HWERROR 0x200 - -/* - * The list of usermode accessible registers. Also see Reg_* later in file. - */ -typedef enum _ipath_ureg { - /* (RO) DMA RcvHdr to be used next. */ - ur_rcvhdrtail = 0, - /* (RW) RcvHdr entry to be processed next by host. */ - ur_rcvhdrhead = 1, - /* (RO) Index of next Eager index to use. */ - ur_rcvegrindextail = 2, - /* (RW) Eager TID to be processed next */ - ur_rcvegrindexhead = 3, - /* For internal use only; max register number. */ - _IPATH_UregMax -} ipath_ureg; - -/* bit values for spi_runtime_flags */ -#define IPATH_RUNTIME_HT 0x1 -#define IPATH_RUNTIME_PCIE 0x2 -#define IPATH_RUNTIME_FORCE_WC_ORDER 0x4 -#define IPATH_RUNTIME_RCVHDR_COPY 0x8 -#define IPATH_RUNTIME_MASTER 0x10 -#define IPATH_RUNTIME_NODMA_RTAIL 0x80 -#define IPATH_RUNTIME_SDMA 0x200 -#define IPATH_RUNTIME_FORCE_PIOAVAIL 0x400 -#define IPATH_RUNTIME_PIO_REGSWAPPED 0x800 - -/* - * This structure is returned by ipath_userinit() immediately after - * open to get implementation-specific info, and info specific to this - * instance. - * - * This struct must have explict pad fields where type sizes - * may result in different alignments between 32 and 64 bit - * programs, since the 64 bit * bit kernel requires the user code - * to have matching offsets - */ -struct ipath_base_info { - /* version of hardware, for feature checking. */ - __u32 spi_hw_version; - /* version of software, for feature checking. */ - __u32 spi_sw_version; - /* InfiniPath port assigned, goes into sent packets */ - __u16 spi_port; - __u16 spi_subport; - /* - * IB MTU, packets IB data must be less than this. - * The MTU is in bytes, and will be a multiple of 4 bytes. - */ - __u32 spi_mtu; - /* - * Size of a PIO buffer. Any given packet's total size must be less - * than this (in words). Included is the starting control word, so - * if 513 is returned, then total pkt size is 512 words or less. - */ - __u32 spi_piosize; - /* size of the TID cache in infinipath, in entries */ - __u32 spi_tidcnt; - /* size of the TID Eager list in infinipath, in entries */ - __u32 spi_tidegrcnt; - /* size of a single receive header queue entry in words. */ - __u32 spi_rcvhdrent_size; - /* - * Count of receive header queue entries allocated. - * This may be less than the spu_rcvhdrcnt passed in!. - */ - __u32 spi_rcvhdr_cnt; - - /* per-chip and other runtime features bitmap (IPATH_RUNTIME_*) */ - __u32 spi_runtime_flags; - - /* address where receive buffer queue is mapped into */ - __u64 spi_rcvhdr_base; - - /* user program. */ - - /* base address of eager TID receive buffers. */ - __u64 spi_rcv_egrbufs; - - /* Allocated by initialization code, not by protocol. */ - - /* - * Size of each TID buffer in host memory, starting at - * spi_rcv_egrbufs. The buffers are virtually contiguous. - */ - __u32 spi_rcv_egrbufsize; - /* - * The special QP (queue pair) value that identifies an infinipath - * protocol packet from standard IB packets. More, probably much - * more, to be added. - */ - __u32 spi_qpair; - - /* - * User register base for init code, not to be used directly by - * protocol or applications. - */ - __u64 __spi_uregbase; - /* - * Maximum buffer size in bytes that can be used in a single TID - * entry (assuming the buffer is aligned to this boundary). This is - * the minimum of what the hardware and software support Guaranteed - * to be a power of 2. - */ - __u32 spi_tid_maxsize; - /* - * alignment of each pio send buffer (byte count - * to add to spi_piobufbase to get to second buffer) - */ - __u32 spi_pioalign; - /* - * The index of the first pio buffer available to this process; - * needed to do lookup in spi_pioavailaddr; not added to - * spi_piobufbase. - */ - __u32 spi_pioindex; - /* number of buffers mapped for this process */ - __u32 spi_piocnt; - - /* - * Base address of writeonly pio buffers for this process. - * Each buffer has spi_piosize words, and is aligned on spi_pioalign - * boundaries. spi_piocnt buffers are mapped from this address - */ - __u64 spi_piobufbase; - - /* - * Base address of readonly memory copy of the pioavail registers. - * There are 2 bits for each buffer. - */ - __u64 spi_pioavailaddr; - - /* - * Address where driver updates a copy of the interface and driver - * status (IPATH_STATUS_*) as a 64 bit value. It's followed by a - * string indicating hardware error, if there was one. - */ - __u64 spi_status; - - /* number of chip ports available to user processes */ - __u32 spi_nports; - /* unit number of chip we are using */ - __u32 spi_unit; - /* num bufs in each contiguous set */ - __u32 spi_rcv_egrperchunk; - /* size in bytes of each contiguous set */ - __u32 spi_rcv_egrchunksize; - /* total size of mmap to cover full rcvegrbuffers */ - __u32 spi_rcv_egrbuftotlen; - __u32 spi_filler_for_align; - /* address of readonly memory copy of the rcvhdrq tail register. */ - __u64 spi_rcvhdr_tailaddr; - - /* shared memory pages for subports if port is shared */ - __u64 spi_subport_uregbase; - __u64 spi_subport_rcvegrbuf; - __u64 spi_subport_rcvhdr_base; - - /* shared memory page for hardware port if it is shared */ - __u64 spi_port_uregbase; - __u64 spi_port_rcvegrbuf; - __u64 spi_port_rcvhdr_base; - __u64 spi_port_rcvhdr_tailaddr; - -} __attribute__ ((aligned(8))); - - -/* - * This version number is given to the driver by the user code during - * initialization in the spu_userversion field of ipath_user_info, so - * the driver can check for compatibility with user code. - * - * The major version changes when data structures - * change in an incompatible way. The driver must be the same or higher - * for initialization to succeed. In some cases, a higher version - * driver will not interoperate with older software, and initialization - * will return an error. - */ -#define IPATH_USER_SWMAJOR 1 - -/* - * Minor version differences are always compatible - * a within a major version, however if user software is larger - * than driver software, some new features and/or structure fields - * may not be implemented; the user code must deal with this if it - * cares, or it must abort after initialization reports the difference. - */ -#define IPATH_USER_SWMINOR 6 - -#define IPATH_USER_SWVERSION ((IPATH_USER_SWMAJOR<<16) | IPATH_USER_SWMINOR) - -#define IPATH_KERN_TYPE 0 - -/* - * Similarly, this is the kernel version going back to the user. It's - * slightly different, in that we want to tell if the driver was built as - * part of a QLogic release, or from the driver from openfabrics.org, - * kernel.org, or a standard distribution, for support reasons. - * The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied. - * - * It's returned by the driver to the user code during initialization in the - * spi_sw_version field of ipath_base_info, so the user code can in turn - * check for compatibility with the kernel. -*/ -#define IPATH_KERN_SWVERSION ((IPATH_KERN_TYPE<<31) | IPATH_USER_SWVERSION) - -/* - * This structure is passed to ipath_userinit() to tell the driver where - * user code buffers are, sizes, etc. The offsets and sizes of the - * fields must remain unchanged, for binary compatibility. It can - * be extended, if userversion is changed so user code can tell, if needed - */ -struct ipath_user_info { - /* - * version of user software, to detect compatibility issues. - * Should be set to IPATH_USER_SWVERSION. - */ - __u32 spu_userversion; - - /* desired number of receive header queue entries */ - __u32 spu_rcvhdrcnt; - - /* size of struct base_info to write to */ - __u32 spu_base_info_size; - - /* - * number of words in KD protocol header - * This tells InfiniPath how many words to copy to rcvhdrq. If 0, - * kernel uses a default. Once set, attempts to set any other value - * are an error (EAGAIN) until driver is reloaded. - */ - __u32 spu_rcvhdrsize; - - /* - * If two or more processes wish to share a port, each process - * must set the spu_subport_cnt and spu_subport_id to the same - * values. The only restriction on the spu_subport_id is that - * it be unique for a given node. - */ - __u16 spu_subport_cnt; - __u16 spu_subport_id; - - __u32 spu_unused; /* kept for compatible layout */ - - /* - * address of struct base_info to write to - */ - __u64 spu_base_info; - -} __attribute__ ((aligned(8))); - -/* User commands. */ - -#define IPATH_CMD_MIN 16 - -#define __IPATH_CMD_USER_INIT 16 /* old set up userspace (for old user code) */ -#define IPATH_CMD_PORT_INFO 17 /* find out what resources we got */ -#define IPATH_CMD_RECV_CTRL 18 /* control receipt of packets */ -#define IPATH_CMD_TID_UPDATE 19 /* update expected TID entries */ -#define IPATH_CMD_TID_FREE 20 /* free expected TID entries */ -#define IPATH_CMD_SET_PART_KEY 21 /* add partition key */ -#define __IPATH_CMD_SLAVE_INFO 22 /* return info on slave processes (for old user code) */ -#define IPATH_CMD_ASSIGN_PORT 23 /* allocate HCA and port */ -#define IPATH_CMD_USER_INIT 24 /* set up userspace */ -#define IPATH_CMD_UNUSED_1 25 -#define IPATH_CMD_UNUSED_2 26 -#define IPATH_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */ -#define IPATH_CMD_POLL_TYPE 28 /* set the kind of polling we want */ -#define IPATH_CMD_ARMLAUNCH_CTRL 29 /* armlaunch detection control */ -/* 30 is unused */ -#define IPATH_CMD_SDMA_INFLIGHT 31 /* sdma inflight counter request */ -#define IPATH_CMD_SDMA_COMPLETE 32 /* sdma completion counter request */ - -/* - * Poll types - */ -#define IPATH_POLL_TYPE_URGENT 0x01 -#define IPATH_POLL_TYPE_OVERFLOW 0x02 - -struct ipath_port_info { - __u32 num_active; /* number of active units */ - __u32 unit; /* unit (chip) assigned to caller */ - __u16 port; /* port on unit assigned to caller */ - __u16 subport; /* subport on unit assigned to caller */ - __u16 num_ports; /* number of ports available on unit */ - __u16 num_subports; /* number of subports opened on port */ -}; - -struct ipath_tid_info { - __u32 tidcnt; - /* make structure same size in 32 and 64 bit */ - __u32 tid__unused; - /* virtual address of first page in transfer */ - __u64 tidvaddr; - /* pointer (same size 32/64 bit) to __u16 tid array */ - __u64 tidlist; - - /* - * pointer (same size 32/64 bit) to bitmap of TIDs used - * for this call; checked for being large enough at open - */ - __u64 tidmap; -}; - -struct ipath_cmd { - __u32 type; /* command type */ - union { - struct ipath_tid_info tid_info; - struct ipath_user_info user_info; - - /* - * address in userspace where we should put the sdma - * inflight counter - */ - __u64 sdma_inflight; - /* - * address in userspace where we should put the sdma - * completion counter - */ - __u64 sdma_complete; - /* address in userspace of struct ipath_port_info to - write result to */ - __u64 port_info; - /* enable/disable receipt of packets */ - __u32 recv_ctrl; - /* enable/disable armlaunch errors (non-zero to enable) */ - __u32 armlaunch_ctrl; - /* partition key to set */ - __u16 part_key; - /* user address of __u32 bitmask of active slaves */ - __u64 slave_mask_addr; - /* type of polling we want */ - __u16 poll_type; - } cmd; -}; - -struct ipath_iovec { - /* Pointer to data, but same size 32 and 64 bit */ - __u64 iov_base; - - /* - * Length of data; don't need 64 bits, but want - * ipath_sendpkt to remain same size as before 32 bit changes, so... - */ - __u64 iov_len; -}; - -/* - * Describes a single packet for send. Each packet can have one or more - * buffers, but the total length (exclusive of IB headers) must be less - * than the MTU, and if using the PIO method, entire packet length, - * including IB headers, must be less than the ipath_piosize value (words). - * Use of this necessitates including sys/uio.h - */ -struct __ipath_sendpkt { - __u32 sps_flags; /* flags for packet (TBD) */ - __u32 sps_cnt; /* number of entries to use in sps_iov */ - /* array of iov's describing packet. TEMPORARY */ - struct ipath_iovec sps_iov[4]; -}; - -/* - * diagnostics can send a packet by "writing" one of the following - * two structs to diag data special file - * The first is the legacy version for backward compatibility - */ -struct ipath_diag_pkt { - __u32 unit; - __u64 data; - __u32 len; -}; - -/* The second diag_pkt struct is the expanded version that allows - * more control over the packet, specifically, by allowing a custom - * pbc (+ static rate) qword, so that special modes and deliberate - * changes to CRCs can be used. The elements were also re-ordered - * for better alignment and to avoid padding issues. - */ -struct ipath_diag_xpkt { - __u64 data; - __u64 pbc_wd; - __u32 unit; - __u32 len; -}; - -/* - * Data layout in I2C flash (for GUID, etc.) - * All fields are little-endian binary unless otherwise stated - */ -#define IPATH_FLASH_VERSION 2 -struct ipath_flash { - /* flash layout version (IPATH_FLASH_VERSION) */ - __u8 if_fversion; - /* checksum protecting if_length bytes */ - __u8 if_csum; - /* - * valid length (in use, protected by if_csum), including - * if_fversion and if_csum themselves) - */ - __u8 if_length; - /* the GUID, in network order */ - __u8 if_guid[8]; - /* number of GUIDs to use, starting from if_guid */ - __u8 if_numguid; - /* the (last 10 characters of) board serial number, in ASCII */ - char if_serial[12]; - /* board mfg date (YYYYMMDD ASCII) */ - char if_mfgdate[8]; - /* last board rework/test date (YYYYMMDD ASCII) */ - char if_testdate[8]; - /* logging of error counts, TBD */ - __u8 if_errcntp[4]; - /* powered on hours, updated at driver unload */ - __u8 if_powerhour[2]; - /* ASCII free-form comment field */ - char if_comment[32]; - /* Backwards compatible prefix for longer QLogic Serial Numbers */ - char if_sprefix[4]; - /* 82 bytes used, min flash size is 128 bytes */ - __u8 if_future[46]; -}; - -/* - * These are the counters implemented in the chip, and are listed in order. - * The InterCaps naming is taken straight from the chip spec. - */ -struct infinipath_counters { - __u64 LBIntCnt; - __u64 LBFlowStallCnt; - __u64 TxSDmaDescCnt; /* was Reserved1 */ - __u64 TxUnsupVLErrCnt; - __u64 TxDataPktCnt; - __u64 TxFlowPktCnt; - __u64 TxDwordCnt; - __u64 TxLenErrCnt; - __u64 TxMaxMinLenErrCnt; - __u64 TxUnderrunCnt; - __u64 TxFlowStallCnt; - __u64 TxDroppedPktCnt; - __u64 RxDroppedPktCnt; - __u64 RxDataPktCnt; - __u64 RxFlowPktCnt; - __u64 RxDwordCnt; - __u64 RxLenErrCnt; - __u64 RxMaxMinLenErrCnt; - __u64 RxICRCErrCnt; - __u64 RxVCRCErrCnt; - __u64 RxFlowCtrlErrCnt; - __u64 RxBadFormatCnt; - __u64 RxLinkProblemCnt; - __u64 RxEBPCnt; - __u64 RxLPCRCErrCnt; - __u64 RxBufOvflCnt; - __u64 RxTIDFullErrCnt; - __u64 RxTIDValidErrCnt; - __u64 RxPKeyMismatchCnt; - __u64 RxP0HdrEgrOvflCnt; - __u64 RxP1HdrEgrOvflCnt; - __u64 RxP2HdrEgrOvflCnt; - __u64 RxP3HdrEgrOvflCnt; - __u64 RxP4HdrEgrOvflCnt; - __u64 RxP5HdrEgrOvflCnt; - __u64 RxP6HdrEgrOvflCnt; - __u64 RxP7HdrEgrOvflCnt; - __u64 RxP8HdrEgrOvflCnt; - __u64 RxP9HdrEgrOvflCnt; /* was Reserved6 */ |