staging: delete rtl8187se wireless driver

There is a "real" driver for this hardware now in drivers/net/ so remove
the staging version as it's not needed anymore.

Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

31 files changed, 0 insertions, 19847 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index ea5efb426f75..22365f140bec 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -40,8 +40,6 @@ source "drivers/staging/olpc_dcon/Kconfig"
 
 source "drivers/staging/panel/Kconfig"
 
-source "drivers/staging/rtl8187se/Kconfig"
-
 source "drivers/staging/rtl8192u/Kconfig"
 
 source "drivers/staging/rtl8192e/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 86e020c2ad0d..fbe84ed2d048 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
 obj-$(CONFIG_COMEDI)		+= comedi/
 obj-$(CONFIG_FB_OLPC_DCON)	+= olpc_dcon/
 obj-$(CONFIG_PANEL)		+= panel/
-obj-$(CONFIG_R8187SE)		+= rtl8187se/
 obj-$(CONFIG_RTL8192U)		+= rtl8192u/
 obj-$(CONFIG_RTL8192E)		+= rtl8192e/
 obj-$(CONFIG_R8712U)		+= rtl8712/
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
deleted file mode 100644
index ff8d41ebca36..000000000000
--- a/drivers/staging/rtl8187se/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config R8187SE
-	tristate "RealTek RTL8187SE Wireless LAN NIC driver"
-	depends on PCI && WLAN
-	depends on m
-	select WIRELESS_EXT
-	select WEXT_PRIV
-	select EEPROM_93CX6
-	select CRYPTO
-	---help---
-	  If built as a module, it will be called r8187se.ko.
diff --git a/drivers/staging/rtl8187se/Makefile b/drivers/staging/rtl8187se/Makefile
deleted file mode 100644
index 91d1aa2830c9..000000000000
--- a/drivers/staging/rtl8187se/Makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-
-#ccflags-y += -DCONFIG_IEEE80211_NOWEP=y
-#ccflags-y += -std=gnu89
-#ccflags-y += -O2
-#CC            = gcc
-
-ccflags-y := -DSW_ANTE
-ccflags-y += -DTX_TRACK
-ccflags-y += -DHIGH_POWER
-ccflags-y += -DSW_DIG
-ccflags-y += -DRATE_ADAPT
-
-#enable it for legacy power save, disable it for leisure power save
-ccflags-y += -DENABLE_LPS
-
-
-#ccflags-y := -mhard-float -DCONFIG_FORCE_HARD_FLOAT=y
-
-r8187se-y :=			\
-		r8180_core.o		\
-		r8180_wx.o		\
-		r8180_rtl8225z2.o	\
-		r8185b_init.o		\
-		r8180_dm.o		\
-		ieee80211/dot11d.o			\
-		ieee80211/ieee80211_softmac.o		\
-		ieee80211/ieee80211_rx.o		\
-		ieee80211/ieee80211_tx.o		\
-		ieee80211/ieee80211_wx.o		\
-		ieee80211/ieee80211_module.o		\
-		ieee80211/ieee80211_softmac_wx.o	\
-		ieee80211/ieee80211_crypt.o		\
-		ieee80211/ieee80211_crypt_tkip.o	\
-		ieee80211/ieee80211_crypt_ccmp.o	\
-		ieee80211/ieee80211_crypt_wep.o
-
-obj-$(CONFIG_R8187SE)	+= r8187se.o
-
diff --git a/drivers/staging/rtl8187se/Module.symvers b/drivers/staging/rtl8187se/Module.symvers
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/drivers/staging/rtl8187se/Module.symvers
+++ /dev/null
diff --git a/drivers/staging/rtl8187se/TODO b/drivers/staging/rtl8187se/TODO
deleted file mode 100644
index 704949a9da0d..000000000000
--- a/drivers/staging/rtl8187se/TODO
+++ /dev/null
@@ -1,13 +0,0 @@
-TODO:
-- prepare private ieee80211 stack for merge with rtl8192su's version:
-  - add hwsec_active flag to struct ieee80211_device
-  - add bHwSec flag to cb_desc structure
-- switch to use shared "librtl" instead of private ieee80211 stack
-- switch to use LIB80211
-- switch to use MAC80211
-- use kernel coding style
-- checkpatch.pl fixes
-- sparse fixes
-- integrate with drivers/net/wireless/rtl818x
-
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.c b/drivers/staging/rtl8187se/ieee80211/dot11d.c
deleted file mode 100644
index 4483c2c0307c..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/dot11d.c
+++ /dev/null
@@ -1,189 +0,0 @@
-#include "dot11d.h"
-
-void Dot11d_Init(struct ieee80211_device *ieee)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);
-
-	pDot11dInfo->bEnabled = 0;
-
-	pDot11dInfo->State = DOT11D_STATE_NONE;
-	pDot11dInfo->CountryIeLen = 0;
-	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
-	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
-	RESET_CIE_WATCHDOG(ieee);
-
-	netdev_info(ieee->dev, "Dot11d_Init()\n");
-}
-
-/* Reset to the state as we are just entering a regulatory domain. */
-void Dot11d_Reset(struct ieee80211_device *ieee)
-{
-	u32 i;
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);
-
-	/* Clear old channel map */
-	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
-	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
-	/* Set new channel map */
-	for (i = 1; i <= 11; i++)
-		(pDot11dInfo->channel_map)[i] = 1;
-
-	for (i = 12; i <= 14; i++)
-		(pDot11dInfo->channel_map)[i] = 2;
-
-	pDot11dInfo->State = DOT11D_STATE_NONE;
-	pDot11dInfo->CountryIeLen = 0;
-	RESET_CIE_WATCHDOG(ieee);
-}
-
-/*
- * Description:
- *	Update country IE from Beacon or Probe Response and configure PHY for
- *	operation in the regulatory domain.
- *
- * TODO:
- *	Configure Tx power.
- *
- * Assumption:
- *	1. IS_DOT11D_ENABLE() is TRUE.
- *	2. Input IE is an valid one.
- */
-void Dot11d_UpdateCountryIe(struct ieee80211_device *dev, u8 *pTaddr,
-			    u16 CoutryIeLen, u8 *pCoutryIe)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-	u8 i, j, NumTriples, MaxChnlNum;
-	u8 index, MaxTxPowerInDbm;
-	PCHNL_TXPOWER_TRIPLE pTriple;
-
-	if ((CoutryIeLen - 3)%3 != 0) {
-		netdev_info(dev->dev, "Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n");
-		Dot11d_Reset(dev);
-		return;
-	}
-
-	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
-	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
-	MaxChnlNum = 0;
-	NumTriples = (CoutryIeLen - 3) / 3; /* skip 3-byte country string. */
-	pTriple = (PCHNL_TXPOWER_TRIPLE)(pCoutryIe + 3);
-	for (i = 0; i < NumTriples; i++) {
-		if (MaxChnlNum >= pTriple->FirstChnl) {
-			/*
-			 * It is not in a monotonically increasing order,
-			 * so stop processing.
-			 */
-			netdev_info(dev->dev,
-				    "Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n");
-			Dot11d_Reset(dev);
-			return;
-		}
-		if (MAX_CHANNEL_NUMBER <
-		    (pTriple->FirstChnl + pTriple->NumChnls)) {
-			/*
-			 * It is not a valid set of channel id,
-			 * so stop processing
-			 */
-			netdev_info(dev->dev,
-				    "Dot11d_UpdateCountryIe(): Invalid country IE, skip it........2\n");
-			Dot11d_Reset(dev);
-			return;
-		}
-
-		for (j = 0; j < pTriple->NumChnls; j++) {
-			index = pTriple->FirstChnl + j;
-			pDot11dInfo->channel_map[index] = 1;
-			MaxTxPowerInDbm = pTriple->MaxTxPowerInDbm;
-			pDot11dInfo->MaxTxPwrDbmList[index] = MaxTxPowerInDbm;
-			MaxChnlNum = pTriple->FirstChnl + j;
-		}
-
-		pTriple = (PCHNL_TXPOWER_TRIPLE)((u8 *)pTriple + 3);
-	}
-#if 1
-	netdev_info(dev->dev, "Channel List:");
-	for (i = 1; i <= MAX_CHANNEL_NUMBER; i++)
-		if (pDot11dInfo->channel_map[i] > 0)
-			netdev_info(dev->dev, " %d", i);
-	netdev_info(dev->dev, "\n");
-#endif
-
-	UPDATE_CIE_SRC(dev, pTaddr);
-
-	pDot11dInfo->CountryIeLen = CoutryIeLen;
-	memcpy(pDot11dInfo->CountryIeBuf, pCoutryIe, CoutryIeLen);
-	pDot11dInfo->State = DOT11D_STATE_LEARNED;
-}
-
-u8 DOT11D_GetMaxTxPwrInDbm(struct ieee80211_device *dev, u8 Channel)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-	u8 MaxTxPwrInDbm = 255;
-
-	if (MAX_CHANNEL_NUMBER < Channel) {
-		netdev_info(dev->dev, "DOT11D_GetMaxTxPwrInDbm(): Invalid Channel\n");
-		return MaxTxPwrInDbm;
-	}
-	if (pDot11dInfo->channel_map[Channel])
-		MaxTxPwrInDbm = pDot11dInfo->MaxTxPwrDbmList[Channel];
-
-	return MaxTxPwrInDbm;
-}
-
-
-void DOT11D_ScanComplete(struct ieee80211_device *dev)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-
-	switch (pDot11dInfo->State) {
-	case DOT11D_STATE_LEARNED:
-		pDot11dInfo->State = DOT11D_STATE_DONE;
-		break;
-
-	case DOT11D_STATE_DONE:
-		if (GET_CIE_WATCHDOG(dev) == 0) {
-			/* Reset country IE if previous one is gone. */
-			Dot11d_Reset(dev);
-		}
-		break;
-	case DOT11D_STATE_NONE:
-		break;
-	}
-}
-
-int IsLegalChannel(struct ieee80211_device *dev, u8 channel)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-
-	if (MAX_CHANNEL_NUMBER < channel) {
-		netdev_info(dev->dev, "IsLegalChannel(): Invalid Channel\n");
-		return 0;
-	}
-	if (pDot11dInfo->channel_map[channel] > 0)
-		return 1;
-	return 0;
-}
-
-int ToLegalChannel(struct ieee80211_device *dev, u8 channel)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-	u8 default_chn = 0;
-	u32 i = 0;
-
-	for (i = 1; i <= MAX_CHANNEL_NUMBER; i++) {
-		if (pDot11dInfo->channel_map[i] > 0) {
-			default_chn = i;
-			break;
-		}
-	}
-
-	if (MAX_CHANNEL_NUMBER < channel) {
-		netdev_info(dev->dev, "IsLegalChannel(): Invalid Channel\n");
-		return default_chn;
-	}
-
-	if (pDot11dInfo->channel_map[channel] > 0)
-		return channel;
-
-	return default_chn;
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.h b/drivers/staging/rtl8187se/ieee80211/dot11d.h
deleted file mode 100644
index f996691307bf..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/dot11d.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef __INC_DOT11D_H
-#define __INC_DOT11D_H
-
-#include "ieee80211.h"
-
-/* #define ENABLE_DOT11D */
-
-/* #define DOT11D_MAX_CHNL_NUM 83 */
-
-typedef struct _CHNL_TXPOWER_TRIPLE {
-	u8 FirstChnl;
-	u8  NumChnls;
-	u8  MaxTxPowerInDbm;
-} CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE;
-
-typedef enum _DOT11D_STATE {
-	DOT11D_STATE_NONE = 0,
-	DOT11D_STATE_LEARNED,
-	DOT11D_STATE_DONE,
-} DOT11D_STATE;
-
-typedef struct _RT_DOT11D_INFO {
-	/* DECLARE_RT_OBJECT(RT_DOT12D_INFO); */
-
-	bool bEnabled; /* dot11MultiDomainCapabilityEnabled */
-
-	u16 CountryIeLen; /* > 0 if CountryIeBuf[] contains valid country information element. */
-	u8  CountryIeBuf[MAX_IE_LEN];
-	u8  CountryIeSrcAddr[6]; /* Source AP of the country IE. */
-	u8  CountryIeWatchdog;
-
-	u8  channel_map[MAX_CHANNEL_NUMBER+1];  /* !!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan) */
-	/* u8  ChnlListLen; // #Bytes valid in ChnlList[]. */
-	/* u8  ChnlList[DOT11D_MAX_CHNL_NUM]; */
-	u8  MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1];
-
-	DOT11D_STATE State;
-} RT_DOT11D_INFO, *PRT_DOT11D_INFO;
-
-#define eqMacAddr(a, b) (((a)[0] == (b)[0] && (a)[1] == (b)[1] && (a)[2] == (b)[2] && (a)[3] == (b)[3] && (a)[4] == (b)[4] && (a)[5] == (b)[5]) ? 1:0)
-#define cpMacAddr(des, src) ((des)[0] = (src)[0], (des)[1] = (src)[1], (des)[2] = (src)[2], (des)[3] = (src)[3], (des)[4] = (src)[4], (des)[5] = (src)[5])
-#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo))
-
-#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled
-#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0)
-
-#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
-#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
-
-#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \
-	(((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \
-	FALSE : \
-	(!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length)))
-
-#define CIE_WATCHDOG_TH 1
-#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog
-#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0
-#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev)
-
-#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE)
-
-void Dot11d_Init(struct ieee80211_device *dev);
-void Dot11d_Reset(struct ieee80211_device *dev);
-void Dot11d_UpdateCountryIe(struct ieee80211_device *dev, u8 *pTaddr,
-			    u16 CoutryIeLen, u8 *pCoutryIe);
-u8 DOT11D_GetMaxTxPwrInDbm(struct ieee80211_device *dev, u8 Channel);
-void DOT11D_ScanComplete(struct ieee80211_device *dev);
-int IsLegalChannel(struct ieee80211_device *dev, u8 channel);
-int ToLegalChannel(struct ieee80211_device *dev, u8 channel);
-
-#endif /*  #ifndef __INC_DOT11D_H */
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
deleted file mode 100644
index d1763b7b8f27..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h
+++ /dev/null
@@ -1,1496 +0,0 @@
-/*
- * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
- * remains copyright by the original authors
- *
- * Portions of the merged code are based on Host AP (software wireless
- * LAN access point) driver for Intersil Prism2/2.5/3.
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * Adaption to a generic IEEE 802.11 stack by James Ketrenos
- * <jketreno@linux.intel.com>
- * Copyright (c) 2004, Intel Corporation
- *
- * Modified for Realtek's wi-fi cards by Andrea Merello
- * <andrea.merello@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-#ifndef IEEE80211_H
-#define IEEE80211_H
-#include <linux/if_ether.h> /* ETH_ALEN */
-#include <linux/kernel.h>   /* ARRAY_SIZE */
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-#include <linux/sched.h>
-#include <linux/semaphore.h>
-#include <linux/wireless.h>
-#include <linux/ieee80211.h>
-#include <linux/interrupt.h>
-
-#define KEY_TYPE_NA		0x0
-#define KEY_TYPE_WEP40 		0x1
-#define KEY_TYPE_TKIP		0x2
-#define KEY_TYPE_CCMP		0x4
-#define KEY_TYPE_WEP104		0x5
-
-#define aSifsTime					10
-
-#define MGMT_QUEUE_NUM 5
-
-
-#define IEEE_CMD_SET_WPA_PARAM			1
-#define	IEEE_CMD_SET_WPA_IE			2
-#define IEEE_CMD_SET_ENCRYPTION			3
-#define IEEE_CMD_MLME				4
-
-#define IEEE_PARAM_WPA_ENABLED			1
-#define IEEE_PARAM_TKIP_COUNTERMEASURES		2
-#define IEEE_PARAM_DROP_UNENCRYPTED		3
-#define IEEE_PARAM_PRIVACY_INVOKED		4
-#define IEEE_PARAM_AUTH_ALGS			5
-#define IEEE_PARAM_IEEE_802_1X			6
-//It should consistent with the driver_XXX.c
-//   David, 2006.9.26
-#define IEEE_PARAM_WPAX_SELECT			7
-//Added for notify the encryption type selection
-//   David, 2006.9.26
-#define IEEE_PROTO_WPA				1
-#define IEEE_PROTO_RSN				2
-//Added for notify the encryption type selection
-//   David, 2006.9.26
-#define IEEE_WPAX_USEGROUP			0
-#define IEEE_WPAX_WEP40				1
-#define IEEE_WPAX_TKIP				2
-#define IEEE_WPAX_WRAP   			3
-#define IEEE_WPAX_CCMP				4
-#define IEEE_WPAX_WEP104			5
-
-#define IEEE_KEY_MGMT_IEEE8021X			1
-#define IEEE_KEY_MGMT_PSK			2
-
-
-
-#define IEEE_MLME_STA_DEAUTH			1
-#define IEEE_MLME_STA_DISASSOC			2
-
-
-#define IEEE_CRYPT_ERR_UNKNOWN_ALG		2
-#define IEEE_CRYPT_ERR_UNKNOWN_ADDR		3
-#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED		4
-#define IEEE_CRYPT_ERR_KEY_SET_FAILED		5
-#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED		6
-#define IEEE_CRYPT_ERR_CARD_CONF_FAILED		7
-
-
-#define	IEEE_CRYPT_ALG_NAME_LEN			16
-
-extern int ieee80211_crypto_tkip_init(void);
-extern void ieee80211_crypto_tkip_exit(void);
-
-//by amy for ps
-typedef struct ieee_param {
-	u32 cmd;
-	u8 sta_addr[ETH_ALEN];
-        union {
-		struct {
-			u8 name;
-			u32 value;
-		} wpa_param;
-		struct {
-			u32 len;
-			u8 reserved[32];
-			u8 data[0];
-		} wpa_ie;
-	        struct{
-			int command;
-    			int reason_code;
-		} mlme;
-		struct {
-			u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
-			u8 set_tx;
-			u32 err;
-			u8 idx;
-			u8 seq[8]; /* sequence counter (set: RX, get: TX) */
-			u16 key_len;
-			u8 key[0];
-		} crypt;
-
-	} u;
-}ieee_param;
-
-
-#define MSECS(t) msecs_to_jiffies(t)
-#define msleep_interruptible_rtl  msleep_interruptible
-
-#define IEEE80211_DATA_LEN		2304
-/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
-   6.2.1.1.2.
-
-   The figure in section 7.1.2 suggests a body size of up to 2312
-   bytes is allowed, which is a bit confusing, I suspect this
-   represents the 2304 bytes of real data, plus a possible 8 bytes of
-   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
-
-#define IEEE80211_3ADDR_LEN 24
-#define IEEE80211_4ADDR_LEN 30
-#define IEEE80211_FCS_LEN    4
-#define IEEE80211_HLEN			IEEE80211_4ADDR_LEN
-#define IEEE80211_FRAME_LEN		(IEEE80211_DATA_LEN + IEEE80211_HLEN)
-#define IEEE80211_MGMT_HDR_LEN 24
-#define IEEE80211_DATA_HDR3_LEN 24
-#define IEEE80211_DATA_HDR4_LEN 30
-
-#define MIN_FRAG_THRESHOLD     256U
-#define	MAX_FRAG_THRESHOLD     2346U
-
-/* Frame control field constants */
-#define IEEE80211_FCTL_DSTODS		0x0300 //added by david
-#define IEEE80211_FCTL_WEP		0x4000
-
-/* debug macros */
-
-#ifdef CONFIG_IEEE80211_DEBUG
-extern u32 ieee80211_debug_level;
-#define IEEE80211_DEBUG(level, fmt, args...) \
-do { if (ieee80211_debug_level & (level)) \
-  printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
-         in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
-#else
-#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
-#endif	/* CONFIG_IEEE80211_DEBUG */
-
-/*
- * To use the debug system;
- *
- * If you are defining a new debug classification, simply add it to the #define
- * list here in the form of:
- *
- * #define IEEE80211_DL_xxxx VALUE
- *
- * shifting value to the left one bit from the previous entry.  xxxx should be
- * the name of the classification (for example, WEP)
- *
- * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
- * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
- * to send output to that classification.
- *
- * To add your debug level to the list of levels seen when you perform
- *
- * % cat /proc/net/ipw/debug_level
- *
- * you simply need to add your entry to the ipw_debug_levels array.
- *
- * If you do not see debug_level in /proc/net/ipw then you do not have
- * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
- *
- */
-
-#define IEEE80211_DL_INFO          (1<<0)
-#define IEEE80211_DL_WX            (1<<1)
-#define IEEE80211_DL_SCAN          (1<<2)
-#define IEEE80211_DL_STATE         (1<<3)
-#define IEEE80211_DL_MGMT          (1<<4)
-#define IEEE80211_DL_FRAG          (1<<5)
-#define IEEE80211_DL_EAP           (1<<6)
-#define IEEE80211_DL_DROP          (1<<7)
-
-#define IEEE80211_DL_TX            (1<<8)
-#define IEEE80211_DL_RX            (1<<9)
-
-#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
-#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
-#define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
-
-#define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
-#define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
-//#define IEEE_DEBUG_SCAN  IEEE80211_WARNING
-#define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
-#define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
-#define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
-#define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
-#define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
-#define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
-#define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
-#include <linux/netdevice.h>
-#include <linux/if_arp.h> /* ARPHRD_ETHER */
-
-#ifndef WIRELESS_SPY
-#define WIRELESS_SPY		// enable iwspy support
-#endif
-#include <net/iw_handler.h>	// new driver API
-
-#ifndef ETH_P_PAE
-#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
-#endif /* ETH_P_PAE */
-
-#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
-
-#ifndef ETH_P_80211_RAW
-#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
-#endif
-
-/* IEEE 802.11 defines */
-
-#define P80211_OUI_LEN 3
-
-struct ieee80211_snap_hdr {
-
-        u8    dsap;   /* always 0xAA */
-        u8    ssap;   /* always 0xAA */
-        u8    ctrl;   /* always 0x03 */
-        u8    oui[P80211_OUI_LEN];    /* organizational universal id */
-
-} __attribute__ ((packed));
-
-#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
-
-#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
-#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
-
-#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
-#define WLAN_GET_SEQ_SEQ(seq)  ((seq) & IEEE80211_SCTL_SEQ)
-
-#define WLAN_CAPABILITY_BSS (1<<0)
-#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
-
-#define IEEE80211_STATMASK_SIGNAL (1<<0)
-#define IEEE80211_STATMASK_RSSI (1<<1)
-#define IEEE80211_STATMASK_NOISE (1<<2)
-#define IEEE80211_STATMASK_RATE (1<<3)
-#define IEEE80211_STATMASK_WEMASK 0x7
-
-
-#define IEEE80211_CCK_MODULATION    (1<<0)
-#define IEEE80211_OFDM_MODULATION   (1<<1)
-
-#define IEEE80211_24GHZ_BAND     (1<<0)
-#define IEEE80211_52GHZ_BAND     (1<<1)
-
-#define IEEE80211_CCK_RATE_LEN  		4
-#define IEEE80211_CCK_RATE_1MB		        0x02
-#define IEEE80211_CCK_RATE_2MB		        0x04
-#define IEEE80211_CCK_RATE_5MB		        0x0B
-#define IEEE80211_CCK_RATE_11MB		        0x16
-#define IEEE80211_OFDM_RATE_LEN 		8
-#define IEEE80211_OFDM_RATE_6MB		        0x0C
-#define IEEE80211_OFDM_RATE_9MB		        0x12
-#define IEEE80211_OFDM_RATE_12MB		0x18
-#define IEEE80211_OFDM_RATE_18MB		0x24
-#define IEEE80211_OFDM_RATE_24MB		0x30
-#define IEEE80211_OFDM_RATE_36MB		0x48
-#define IEEE80211_OFDM_RATE_48MB		0x60
-#define IEEE80211_OFDM_RATE_54MB		0x6C
-#define IEEE80211_BASIC_RATE_MASK		0x80
-
-#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
-#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
-#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
-#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
-#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
-#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
-#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
-#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
-#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
-#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
-#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
-#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
-
-#define IEEE80211_CCK_RATES_MASK	        0x0000000F
-#define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
-	IEEE80211_CCK_RATE_2MB_MASK)
-#define IEEE80211_CCK_DEFAULT_RATES_MASK	(IEEE80211_CCK_BASIC_RATES_MASK | \
-        IEEE80211_CCK_RATE_5MB_MASK | \
-        IEEE80211_CCK_RATE_11MB_MASK)
-
-#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
-#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
-	IEEE80211_OFDM_RATE_12MB_MASK | \
-	IEEE80211_OFDM_RATE_24MB_MASK)
-#define IEEE80211_OFDM_DEFAULT_RATES_MASK	(IEEE80211_OFDM_BASIC_RATES_MASK | \
-	IEEE80211_OFDM_RATE_9MB_MASK  | \
-	IEEE80211_OFDM_RATE_18MB_MASK | \
-	IEEE80211_OFDM_RATE_36MB_MASK | \
-	IEEE80211_OFDM_RATE_48MB_MASK | \
-	IEEE80211_OFDM_RATE_54MB_MASK)
-#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
-                                IEEE80211_CCK_DEFAULT_RATES_MASK)
-
-#define IEEE80211_NUM_OFDM_RATES	    8
-#define IEEE80211_NUM_CCK_RATES	            4
-#define IEEE80211_OFDM_SHIFT_MASK_A         4
-
-/* this is stolen and modified from the madwifi driver*/
-#define IEEE80211_FC0_TYPE_MASK		0x0c
-#define IEEE80211_FC0_TYPE_DATA		0x08
-#define IEEE80211_FC0_SUBTYPE_MASK	0xB0
-#define IEEE80211_FC0_SUBTYPE_QOS	0x80
-
-#define IEEE80211_QOS_HAS_SEQ(fc) \
-	(((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
-	 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
-
-/* this is stolen from ipw2200 driver */
-#define IEEE_IBSS_MAC_HASH_SIZE 31
-struct ieee_ibss_seq {
-	u8 mac[ETH_ALEN];
-	u16 seq_num[17];
-	u16 frag_num[17];
-	unsigned long packet_time[17];
-	struct list_head list;
-};
-
-/* NOTE: This data is for statistical purposes; not all hardware provides this
- *       information for frames received.  Not setting these will not cause
- *       any adverse affects. */
-struct ieee80211_rx_stats {
-	u32 mac_time[2];
-	u8 signalstrength;
-	s8 rssi;
-	u8 signal;
-	u8 noise;
-	u16 rate; /* in 100 kbps */
-	u8 received_channel;
-	u8 control;
-	u8 mask;
-	u8 freq;
-	u16 len;
-	u8 nic_type;
-};
-
-/* IEEE 802.11 requires that STA supports concurrent reception of at least
- * three fragmented frames. This define can be increased to support more
- * concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
-#define IEEE80211_FRAG_CACHE_LEN 4
-
-struct ieee80211_frag_entry {
-	unsigned long first_frag_time;
-	unsigned int seq;
-	unsigned int last_frag;
-	struct sk_buff *skb;
-	u8 src_addr[ETH_ALEN];
-	u8 dst_addr[ETH_ALEN];
-};
-
-struct ieee80211_stats {
-	unsigned int tx_unicast_frames;
-	unsigned int tx_multicast_frames;
-	unsigned int tx_fragments;
-	unsigned int tx_unicast_octets;
-	unsigned int tx_multicast_octets;
-	unsigned int tx_deferred_transmissions;
-	unsigned int tx_single_retry_frames;
-	unsigned int tx_multiple_retry_frames;
-	unsigned int tx_retry_limit_exceeded;
-	unsigned int tx_discards;
-	unsigned int rx_unicast_frames;
-	unsigned int rx_multicast_frames;
-	unsigned int rx_fragments;
-	unsigned int rx_unicast_octets;
-	unsigned int rx_multicast_octets;
-	unsigned int rx_fcs_errors;
-	unsigned int rx_discards_no_buffer;
-	unsigned int tx_discards_wrong_sa;
-	unsigned int rx_discards_undecryptable;
-	unsigned int rx_message_in_msg_fragments;
-	unsigned int rx_message_in_bad_msg_fragments;
-};
-
-struct ieee80211_device;
-
-#include "ieee80211_crypt.h"
-
-#define SEC_KEY_1         (1<<0)
-#define SEC_KEY_2         (1<<1)
-#define SEC_KEY_3         (1<<2)
-#define SEC_KEY_4         (1<<3)
-#define SEC_ACTIVE_KEY    (1<<4)
-#define SEC_AUTH_MODE     (1<<5)
-#define SEC_UNICAST_GROUP (1<<6)
-#define SEC_LEVEL         (1<<7)
-#define SEC_ENABLED       (1<<8)
-
-#define SEC_LEVEL_0      0 /* None */
-#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
-#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
-#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
-#define SEC_LEVEL_3      4 /* Level 2 + CCMP */
-
-#define WEP_KEYS 4
-#define WEP_KEY_LEN 13
-
-#define WEP_KEY_LEN_MODIF 32
-
-struct ieee80211_security {
-	u16 active_key:2,