[media] cpia, stradis: remove deprecated V4L1 drivers

Nobody stepped in to convert these drivers to V4L2, so they are now
removed from the kernel.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

13 files changed, 0 insertions, 8265 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index d9e3b6ddf682..7e7b27b3ddb0 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -51,10 +51,6 @@ source "drivers/staging/cx25821/Kconfig"
 
 source "drivers/staging/tm6000/Kconfig"
 
-source "drivers/staging/cpia/Kconfig"
-
-source "drivers/staging/stradis/Kconfig"
-
 source "drivers/staging/se401/Kconfig"
 
 source "drivers/staging/usbvideo/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 8058a15b0cd7..72e0c839ea34 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -8,8 +8,6 @@ obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_VIDEO_GO7007)	+= go7007/
 obj-$(CONFIG_VIDEO_CX25821)	+= cx25821/
 obj-$(CONFIG_VIDEO_TM6000)	+= tm6000/
-obj-$(CONFIG_VIDEO_CPIA)	+= cpia/
-obj-$(CONFIG_VIDEO_STRADIS)	+= stradis/
 obj-$(CONFIG_USB_VICAM)         += usbvideo/
 obj-$(CONFIG_USB_SE401)         += se401/
 obj-$(CONFIG_LIRC_STAGING)	+= lirc/
diff --git a/drivers/staging/cpia/Kconfig b/drivers/staging/cpia/Kconfig
deleted file mode 100644
index 205d247ad373..000000000000
--- a/drivers/staging/cpia/Kconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-config VIDEO_CPIA
-	tristate "CPiA Video For Linux (DEPRECATED)"
-	depends on VIDEO_V4L1
-	default n
-	---help---
-	  This driver is DEPRECATED please use the gspca cpia1 module
-	  instead. Note that you need atleast version 0.6.4 of libv4l for
-	  the cpia1 gspca module.
-
-	  This is the video4linux driver for cameras based on Vision's CPiA
-	  (Colour Processor Interface ASIC), such as the Creative Labs Video
-	  Blaster Webcam II. If you have one of these cameras, say Y here
-	  and select parallel port and/or USB lowlevel support below,
-	  otherwise say N. This will not work with the Creative Webcam III.
-
-	  Please read <file:Documentation/video4linux/README.cpia> for more
-	  information.
-
-	  This driver is also available as a module (cpia).
-
-config VIDEO_CPIA_PP
-	tristate "CPiA Parallel Port Lowlevel Support"
-	depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
-	help
-	  This is the lowlevel parallel port support for cameras based on
-	  Vision's CPiA (Colour Processor Interface ASIC), such as the
-	  Creative Webcam II. If you have the parallel port version of one
-	  of these cameras, say Y here, otherwise say N. It is also available
-	  as a module (cpia_pp).
-
-config VIDEO_CPIA_USB
-	tristate "CPiA USB Lowlevel Support"
-	depends on VIDEO_CPIA && USB
-	help
-	  This is the lowlevel USB support for cameras based on Vision's CPiA
-	  (Colour Processor Interface ASIC), such as the Creative Webcam II.
-	  If you have the USB version of one of these cameras, say Y here,
-	  otherwise say N. This will not work with the Creative Webcam III.
-	  It is also available as a module (cpia_usb).
diff --git a/drivers/staging/cpia/Makefile b/drivers/staging/cpia/Makefile
deleted file mode 100644
index 89e52f10d739..000000000000
--- a/drivers/staging/cpia/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-$(CONFIG_VIDEO_CPIA) += cpia.o
-obj-$(CONFIG_VIDEO_CPIA_PP) += cpia_pp.o
-obj-$(CONFIG_VIDEO_CPIA_USB) += cpia_usb.o
-
-EXTRA_CFLAGS += -Idrivers/media/video
diff --git a/drivers/staging/cpia/TODO b/drivers/staging/cpia/TODO
deleted file mode 100644
index ccb1c0775eec..000000000000
--- a/drivers/staging/cpia/TODO
+++ /dev/null
@@ -1,8 +0,0 @@
-This is an obsolete driver for some cpia-based webcams that use the parallel port.
-We couldn't find anyone with this hardware in order to port it to use V4L2.
-
-Also, parallel-port webcams are obsolete nowadays.
-
-If nobody take care on it, the driver will be removed for 2.6.38.
-
-Please send patches to linux-media@vger.kernel.org
diff --git a/drivers/staging/cpia/cpia.c b/drivers/staging/cpia/cpia.c
deleted file mode 100644
index 0e740b8dafc3..000000000000
--- a/drivers/staging/cpia/cpia.c
+++ /dev/null
@@ -1,4028 +0,0 @@
-/*
- * cpia CPiA driver
- *
- * Supports CPiA based Video Camera's.
- *
- * (C) Copyright 1999-2000 Peter Pregler
- * (C) Copyright 1999-2000 Scott J. Bertin
- * (C) Copyright 1999-2000 Johannes Erdfelt <johannes@erdfelt.com>
- * (C) Copyright 2000 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
-/* #define _CPIA_DEBUG_  1 */
-
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/vmalloc.h>
-#include <linux/sched.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/ctype.h>
-#include <linux/pagemap.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <linux/mutex.h>
-
-#include "cpia.h"
-
-static int video_nr = -1;
-
-#ifdef MODULE
-module_param(video_nr, int, 0);
-MODULE_AUTHOR("Scott J. Bertin <sbertin@securenym.net> & Peter Pregler <Peter_Pregler@email.com> & Johannes Erdfelt <johannes@erdfelt.com>");
-MODULE_DESCRIPTION("V4L-driver for Vision CPiA based cameras");
-MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("video");
-#endif
-
-static unsigned short colorspace_conv;
-module_param(colorspace_conv, ushort, 0444);
-MODULE_PARM_DESC(colorspace_conv,
-		 " Colorspace conversion:"
-		 "\n  0 = disable, 1 = enable"
-		 "\n  Default value is 0"
-		 );
-
-#define ABOUT "V4L-Driver for Vision CPiA based cameras"
-
-#define CPIA_MODULE_CPIA			(0<<5)
-#define CPIA_MODULE_SYSTEM			(1<<5)
-#define CPIA_MODULE_VP_CTRL			(5<<5)
-#define CPIA_MODULE_CAPTURE			(6<<5)
-#define CPIA_MODULE_DEBUG			(7<<5)
-
-#define INPUT (DATA_IN << 8)
-#define OUTPUT (DATA_OUT << 8)
-
-#define CPIA_COMMAND_GetCPIAVersion	(INPUT | CPIA_MODULE_CPIA | 1)
-#define CPIA_COMMAND_GetPnPID		(INPUT | CPIA_MODULE_CPIA | 2)
-#define CPIA_COMMAND_GetCameraStatus	(INPUT | CPIA_MODULE_CPIA | 3)
-#define CPIA_COMMAND_GotoHiPower	(OUTPUT | CPIA_MODULE_CPIA | 4)
-#define CPIA_COMMAND_GotoLoPower	(OUTPUT | CPIA_MODULE_CPIA | 5)
-#define CPIA_COMMAND_GotoSuspend	(OUTPUT | CPIA_MODULE_CPIA | 7)
-#define CPIA_COMMAND_GotoPassThrough	(OUTPUT | CPIA_MODULE_CPIA | 8)
-#define CPIA_COMMAND_ModifyCameraStatus	(OUTPUT | CPIA_MODULE_CPIA | 10)
-
-#define CPIA_COMMAND_ReadVCRegs		(INPUT | CPIA_MODULE_SYSTEM | 1)
-#define CPIA_COMMAND_WriteVCReg		(OUTPUT | CPIA_MODULE_SYSTEM | 2)
-#define CPIA_COMMAND_ReadMCPorts	(INPUT | CPIA_MODULE_SYSTEM | 3)
-#define CPIA_COMMAND_WriteMCPort	(OUTPUT | CPIA_MODULE_SYSTEM | 4)
-#define CPIA_COMMAND_SetBaudRate	(OUTPUT | CPIA_MODULE_SYSTEM | 5)
-#define CPIA_COMMAND_SetECPTiming	(OUTPUT | CPIA_MODULE_SYSTEM | 6)
-#define CPIA_COMMAND_ReadIDATA		(INPUT | CPIA_MODULE_SYSTEM | 7)
-#define CPIA_COMMAND_WriteIDATA		(OUTPUT | CPIA_MODULE_SYSTEM | 8)
-#define CPIA_COMMAND_GenericCall	(OUTPUT | CPIA_MODULE_SYSTEM | 9)
-#define CPIA_COMMAND_I2CStart		(OUTPUT | CPIA_MODULE_SYSTEM | 10)
-#define CPIA_COMMAND_I2CStop		(OUTPUT | CPIA_MODULE_SYSTEM | 11)
-#define CPIA_COMMAND_I2CWrite		(OUTPUT | CPIA_MODULE_SYSTEM | 12)
-#define CPIA_COMMAND_I2CRead		(INPUT | CPIA_MODULE_SYSTEM | 13)
-
-#define CPIA_COMMAND_GetVPVersion	(INPUT | CPIA_MODULE_VP_CTRL | 1)
-#define CPIA_COMMAND_ResetFrameCounter	(INPUT | CPIA_MODULE_VP_CTRL | 2)
-#define CPIA_COMMAND_SetColourParams	(OUTPUT | CPIA_MODULE_VP_CTRL | 3)
-#define CPIA_COMMAND_SetExposure	(OUTPUT | CPIA_MODULE_VP_CTRL | 4)
-#define CPIA_COMMAND_SetColourBalance	(OUTPUT | CPIA_MODULE_VP_CTRL | 6)
-#define CPIA_COMMAND_SetSensorFPS	(OUTPUT | CPIA_MODULE_VP_CTRL | 7)
-#define CPIA_COMMAND_SetVPDefaults	(OUTPUT | CPIA_MODULE_VP_CTRL | 8)
-#define CPIA_COMMAND_SetApcor		(OUTPUT | CPIA_MODULE_VP_CTRL | 9)
-#define CPIA_COMMAND_SetFlickerCtrl	(OUTPUT | CPIA_MODULE_VP_CTRL | 10)
-#define CPIA_COMMAND_SetVLOffset	(OUTPUT | CPIA_MODULE_VP_CTRL | 11)
-#define CPIA_COMMAND_GetColourParams	(INPUT | CPIA_MODULE_VP_CTRL | 16)
-#define CPIA_COMMAND_GetColourBalance	(INPUT | CPIA_MODULE_VP_CTRL | 17)
-#define CPIA_COMMAND_GetExposure	(INPUT | CPIA_MODULE_VP_CTRL | 18)
-#define CPIA_COMMAND_SetSensorMatrix	(OUTPUT | CPIA_MODULE_VP_CTRL | 19)
-#define CPIA_COMMAND_ColourBars		(OUTPUT | CPIA_MODULE_VP_CTRL | 25)
-#define CPIA_COMMAND_ReadVPRegs		(INPUT | CPIA_MODULE_VP_CTRL | 30)
-#define CPIA_COMMAND_WriteVPReg		(OUTPUT | CPIA_MODULE_VP_CTRL | 31)
-
-#define CPIA_COMMAND_GrabFrame		(OUTPUT | CPIA_MODULE_CAPTURE | 1)
-#define CPIA_COMMAND_UploadFrame	(OUTPUT | CPIA_MODULE_CAPTURE | 2)
-#define CPIA_COMMAND_SetGrabMode	(OUTPUT | CPIA_MODULE_CAPTURE | 3)
-#define CPIA_COMMAND_InitStreamCap	(OUTPUT | CPIA_MODULE_CAPTURE | 4)
-#define CPIA_COMMAND_FiniStreamCap	(OUTPUT | CPIA_MODULE_CAPTURE | 5)
-#define CPIA_COMMAND_StartStreamCap	(OUTPUT | CPIA_MODULE_CAPTURE | 6)
-#define CPIA_COMMAND_EndStreamCap	(OUTPUT | CPIA_MODULE_CAPTURE | 7)
-#define CPIA_COMMAND_SetFormat		(OUTPUT | CPIA_MODULE_CAPTURE | 8)
-#define CPIA_COMMAND_SetROI		(OUTPUT | CPIA_MODULE_CAPTURE | 9)
-#define CPIA_COMMAND_SetCompression	(OUTPUT | CPIA_MODULE_CAPTURE | 10)
-#define CPIA_COMMAND_SetCompressionTarget (OUTPUT | CPIA_MODULE_CAPTURE | 11)
-#define CPIA_COMMAND_SetYUVThresh	(OUTPUT | CPIA_MODULE_CAPTURE | 12)
-#define CPIA_COMMAND_SetCompressionParams (OUTPUT | CPIA_MODULE_CAPTURE | 13)
-#define CPIA_COMMAND_DiscardFrame	(OUTPUT | CPIA_MODULE_CAPTURE | 14)
-#define CPIA_COMMAND_GrabReset		(OUTPUT | CPIA_MODULE_CAPTURE | 15)
-
-#define CPIA_COMMAND_OutputRS232	(OUTPUT | CPIA_MODULE_DEBUG | 1)
-#define CPIA_COMMAND_AbortProcess	(OUTPUT | CPIA_MODULE_DEBUG | 4)
-#define CPIA_COMMAND_SetDramPage	(OUTPUT | CPIA_MODULE_DEBUG | 5)
-#define CPIA_COMMAND_StartDramUpload	(OUTPUT | CPIA_MODULE_DEBUG | 6)
-#define CPIA_COMMAND_StartDummyDtream	(OUTPUT | CPIA_MODULE_DEBUG | 8)
-#define CPIA_COMMAND_AbortStream	(OUTPUT | CPIA_MODULE_DEBUG | 9)
-#define CPIA_COMMAND_DownloadDRAM	(OUTPUT | CPIA_MODULE_DEBUG | 10)
-#define CPIA_COMMAND_Null		(OUTPUT | CPIA_MODULE_DEBUG | 11)
-
-enum {
-	FRAME_READY,		/* Ready to grab into */
-	FRAME_GRABBING,		/* In the process of being grabbed into */
-	FRAME_DONE,		/* Finished grabbing, but not been synced yet */
-	FRAME_UNUSED,		/* Unused (no MCAPTURE) */
-};
-
-#define COMMAND_NONE			0x0000
-#define COMMAND_SETCOMPRESSION		0x0001
-#define COMMAND_SETCOMPRESSIONTARGET	0x0002
-#define COMMAND_SETCOLOURPARAMS		0x0004
-#define COMMAND_SETFORMAT		0x0008
-#define COMMAND_PAUSE			0x0010
-#define COMMAND_RESUME			0x0020
-#define COMMAND_SETYUVTHRESH		0x0040
-#define COMMAND_SETECPTIMING		0x0080
-#define COMMAND_SETCOMPRESSIONPARAMS	0x0100
-#define COMMAND_SETEXPOSURE		0x0200
-#define COMMAND_SETCOLOURBALANCE	0x0400
-#define COMMAND_SETSENSORFPS		0x0800
-#define COMMAND_SETAPCOR		0x1000
-#define COMMAND_SETFLICKERCTRL		0x2000
-#define COMMAND_SETVLOFFSET		0x4000
-#define COMMAND_SETLIGHTS		0x8000
-
-#define ROUND_UP_EXP_FOR_FLICKER 15
-
-/* Constants for automatic frame rate adjustment */
-#define MAX_EXP       302
-#define MAX_EXP_102   255
-#define LOW_EXP       140
-#define VERY_LOW_EXP   70
-#define TC             94
-#define	EXP_ACC_DARK   50
-#define	EXP_ACC_LIGHT  90
-#define HIGH_COMP_102 160
-#define MAX_COMP      239
-#define DARK_TIME       3
-#define LIGHT_TIME      3
-
-/* Maximum number of 10ms loops to wait for the stream to become ready */
-#define READY_TIMEOUT 100
-
-/* Developer's Guide Table 5 p 3-34
- * indexed by [mains][sensorFps.baserate][sensorFps.divisor]*/
-static u8 flicker_jumps[2][2][4] =
-{ { { 76, 38, 19, 9 }, { 92, 46, 23, 11 } },
-  { { 64, 32, 16, 8 }, { 76, 38, 19, 9} }
-};
-
-/* forward declaration of local function */
-static void reset_camera_struct(struct cam_data *cam);
-static int find_over_exposure(int brightness);
-static void set_flicker(struct cam_params *params, volatile u32 *command_flags,
-			int on);
-
-
-/**********************************************************************
- *
- * Memory management
- *
- **********************************************************************/
-static void *rvmalloc(unsigned long size)
-{
-	void *mem;
-	unsigned long adr;
-
-	size = PAGE_ALIGN(size);
-	mem = vmalloc_32(size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
-	adr = (unsigned long) mem;
-	while (size > 0) {
-		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	return mem;
-}
-
-static void rvfree(void *mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr = (unsigned long) mem;
-	while ((long) size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	vfree(mem);
-}
-
-/**********************************************************************
- *
- * /proc interface
- *
- **********************************************************************/
-#ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *cpia_proc_root=NULL;
-
-static int cpia_proc_show(struct seq_file *m, void *v)
-{
-	struct cam_data *cam = m->private;
-	int tmp;
-	char tmpstr[29];
-
-	seq_printf(m, "read-only\n-----------------------\n");
-	seq_printf(m, "V4L Driver version:       %d.%d.%d\n",
-		       CPIA_MAJ_VER, CPIA_MIN_VER, CPIA_PATCH_VER);
-	seq_printf(m, "CPIA Version:             %d.%02d (%d.%d)\n",
-		       cam->params.version.firmwareVersion,
-		       cam->params.version.firmwareRevision,
-		       cam->params.version.vcVersion,
-		       cam->params.version.vcRevision);
-	seq_printf(m, "CPIA PnP-ID:              %04x:%04x:%04x\n",
-		       cam->params.pnpID.vendor, cam->params.pnpID.product,
-		       cam->params.pnpID.deviceRevision);
-	seq_printf(m, "VP-Version:               %d.%d %04x\n",
-		       cam->params.vpVersion.vpVersion,
-		       cam->params.vpVersion.vpRevision,
-		       cam->params.vpVersion.cameraHeadID);
-
-	seq_printf(m, "system_state:             %#04x\n",
-		       cam->params.status.systemState);
-	seq_printf(m, "grab_state:               %#04x\n",
-		       cam->params.status.grabState);
-	seq_printf(m, "stream_state:             %#04x\n",
-		       cam->params.status.streamState);
-	seq_printf(m, "fatal_error:              %#04x\n",
-		       cam->params.status.fatalError);
-	seq_printf(m, "cmd_error:                %#04x\n",
-		       cam->params.status.cmdError);
-	seq_printf(m, "debug_flags:              %#04x\n",
-		       cam->params.status.debugFlags);
-	seq_printf(m, "vp_status:                %#04x\n",
-		       cam->params.status.vpStatus);
-	seq_printf(m, "error_code:               %#04x\n",
-		       cam->params.status.errorCode);
-	/* QX3 specific entries */
-	if (cam->params.qx3.qx3_detected) {
-		seq_printf(m, "button:                   %4d\n",
-			       cam->params.qx3.button);
-		seq_printf(m, "cradled:                  %4d\n",
-			       cam->params.qx3.cradled);
-	}
-	seq_printf(m, "video_size:               %s\n",
-		       cam->params.format.videoSize == VIDEOSIZE_CIF ?
-		       "CIF " : "QCIF");
-	seq_printf(m, "roi:                      (%3d, %3d) to (%3d, %3d)\n",
-		       cam->params.roi.colStart*8,
-		       cam->params.roi.rowStart*4,
-		       cam->params.roi.colEnd*8,
-		       cam->params.roi.rowEnd*4);
-	seq_printf(m, "actual_fps:               %3d\n", cam->fps);
-	seq_printf(m, "transfer_rate:            %4dkB/s\n",
-		       cam->transfer_rate);
-
-	seq_printf(m, "\nread-write\n");
-	seq_printf(m, "-----------------------  current       min"
-		       "       max   default  comment\n");
-	seq_printf(m, "brightness:             %8d  %8d  %8d  %8d\n",
-		       cam->params.colourParams.brightness, 0, 100, 50);
-	if (cam->params.version.firmwareVersion == 1 &&
-	   cam->params.version.firmwareRevision == 2)
-		/* 1-02 firmware limits contrast to 80 */
-		tmp = 80;
-	else
-		tmp = 96;
-
-	seq_printf(m, "contrast:               %8d  %8d  %8d  %8d"
-		       "  steps of 8\n",
-		       cam->params.colourParams.contrast, 0, tmp, 48);
-	seq_printf(m, "saturation:             %8d  %8d  %8d  %8d\n",
-		       cam->params.colourParams.saturation, 0, 100, 50);
-	tmp = (25000+5000*cam->params.sensorFps.baserate)/
-	      (1<<cam->params.sensorFps.divisor);
-	seq_printf(m, "sensor_fps:             %4d.%03d  %8d  %8d  %8d\n",
-		       tmp/1000, tmp%1000, 3, 30, 15);
-	seq_printf(m, "stream_start_line:      %8d  %8d  %8d  %8d\n",
-		       2*cam->params.streamStartLine, 0,
-		       cam->params.format.videoSize == VIDEOSIZE_CIF ? 288:144,
-		       cam->params.format.videoSize == VIDEOSIZE_CIF ? 240:120);
-	seq_printf(m, "sub_sample:             %8s  %8s  %8s  %8s\n",
-		       cam->params.format.subSample == SUBSAMPLE_420 ?
-		       "420" : "422", "420", "422", "422");
-	seq_printf(m, "yuv_order:              %8s  %8s  %8s  %8s\n",
-		       cam->params.format.yuvOrder == YUVORDER_YUYV ?
-		       "YUYV" : "UYVY", "YUYV" , "UYVY", "YUYV");
-	seq_printf(m, "ecp_timing:             %8s  %8s  %8s  %8s\n",
-		       cam->params.ecpTiming ? "slow" : "normal", "slow",
-		       "normal", "normal");
-
-	if (cam->params.colourBalance.balanceMode == 2) {
-		sprintf(tmpstr, "auto");
-	} else {
-		sprintf(tmpstr, "manual");
-	}
-	seq_printf(m, "color_balance_mode:     %8s  %8s  %8s"
-		       "  %8s\n",  tmpstr, "manual", "auto", "auto");
-	seq_printf(m, "red_gain:               %8d  %8d  %8d  %8d\n",
-		       cam->params.colourBalance.redGain, 0, 212, 32);
-	seq_printf(m, "green_gain:             %8d  %8d  %8d  %8d\n",
-		       cam->params.colourBalance.greenGain, 0, 212, 6);
-	seq_printf(m, "blue_gain:              %8d  %8d  %8d  %8d\n",
-		       cam->params.colourBalance.blueGain, 0, 212, 92);
-
-	if (cam->params.version.firmwareVersion == 1 &&
-	   cam->params.version.firmwareRevision == 2)
-		/* 1-02 firmware limits gain to 2 */
-		sprintf(tmpstr, "%8d  %8d  %8d", 1, 2, 2);
-	else
-		sprintf(tmpstr, "%8d  %8d  %8d", 1, 8, 2);
-
-	if (cam->params.exposure.gainMode == 0)
-		seq_printf(m, "max_gain:                unknown  %28s"
-			       "  powers of 2\n", tmpstr);
-	else
-		seq_printf(m, "max_gain:               %8d  %28s"
-			       "  1,2,4 or 8 \n",
-			       1<<(cam->params.exposure.gainMode-1), tmpstr);
-
-	switch(cam->params.exposure.expMode) {
-	case 1:
-	case 3:
-		sprintf(tmpstr, "manual");
-		break;
-	case 2:
-		sprintf(tmpstr, "auto");
-		break;
-	default:
-		sprintf(tmpstr, "unknown");
-		break;
-	}
-	seq_printf(m, "exposure_mode:          %8s  %8s  %8s"
-		       "  %8s\n",  tmpstr, "manual", "auto", "auto");
-	seq_printf(m, "centre_weight:          %8s  %8s  %8s  %8s\n",
-		       (2-cam->params.exposure.centreWeight) ? "on" : "off",
-		       "off", "on", "on");
-	seq_printf(m, "gain:                   %8d  %8d  max_gain  %8d  1,2,4,8 possible\n",
-		       1<<cam->params.exposure.gain, 1, 1);
-	if (cam->params.version.firmwareVersion == 1 &&
-	   cam->params.version.firmwareRevision == 2)
-		/* 1-02 firmware limits fineExp/2 to 127 */
-		tmp = 254;
-	else
-		tmp = 510;
-
-	seq_printf(m, "fine_exp:               %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.fineExp*2, 0, tmp, 0);
-	if (cam->params.version.firmwareVersion == 1 &&
-	   cam->params.version.firmwareRevision == 2)
-		/* 1-02 firmware limits coarseExpHi to 0 */
-		tmp = MAX_EXP_102;
-	else
-		tmp = MAX_EXP;
-
-	seq_printf(m, "coarse_exp:             %8d  %8d  %8d"
-		       "  %8d\n", cam->params.exposure.coarseExpLo+
-		       256*cam->params.exposure.coarseExpHi, 0, tmp, 185);
-	seq_printf(m, "red_comp:               %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.redComp, COMP_RED, 255, COMP_RED);
-	seq_printf(m, "green1_comp:            %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.green1Comp, COMP_GREEN1, 255,
-		       COMP_GREEN1);
-	seq_printf(m, "green2_comp:            %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.green2Comp, COMP_GREEN2, 255,
-		       COMP_GREEN2);
-	seq_printf(m, "blue_comp:              %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.blueComp, COMP_BLUE, 255, COMP_BLUE);
-
-	seq_printf(m, "apcor_gain1:            %#8x  %#8x  %#8x  %#8x\n",
-		       cam->params.apcor.gain1, 0, 0xff, 0x1c);
-	seq_printf(m, "apcor_gain2:            %#8x  %#8x  %#8x  %#8x\n",
-		       cam->params.apcor.gain2, 0, 0xff, 0x1a);
-	seq_printf(m, "apcor_gain4:            %#8x  %#8x  %#8x  %#8x\n",
-		       cam->params.apcor.gain4, 0, 0xff, 0x2d);
-	seq_printf(m, "apcor_gain8:            %#8x  %#8x  %#8x  %#8x\n",
-		       cam->params.apcor.gain8, 0, 0xff, 0x2a);
-	seq_printf(m, "vl_offset_gain1:        %8d  %8d  %8d  %8d\n",
-		       cam->params.vlOffset.gain1, 0, 255, 24);
-	seq_printf(m, "vl_offset_gain2:        %8d  %8d  %8d  %8d\n",
-		       cam->params.vlOffset.gain2, 0, 255, 28);
-	seq_printf(m, "vl_offset_gain4:        %8d  %8d  %8d  %8d\n",
-		       cam->params.vlOffset.gain4, 0, 255, 30);
-	seq_printf(m, "vl_offset_gain8:        %8d  %8d  %8d  %8d\n",
-		       cam->params.vlOffset.gain8, 0, 255, 30);
-	seq_printf(m, "flicker_control:        %8s  %8s  %8s  %8s\n",
-		       cam->params.flickerControl.flickerMode ? "on" : "off",
-		       "off", "on", "off");
-	seq_printf(m, "mains_frequency:        %8d  %8d  %8d  %8d"
-		       " only 50/60\n",
-		       cam->mainsFreq ? 60 : 50, 50, 60, 50);
-	if(cam->params.flickerControl.allowableOverExposure < 0)
-		seq_printf(m, "allowable_overexposure: %4dauto      auto  %8d      auto\n",
-			       -cam->params.flickerControl.allowableOverExposure,
-			       255);
-	else
-		seq_printf(m, "allowable_overexposure: %8d      auto  %8d      auto\n",
-			       cam->params.flickerControl.allowableOverExposure,
-			       255);
-	seq_printf(m, "compression_mode:       ");
-	switch(cam->params.compression.mode) {
-	case CPIA_COMPRESSION_NONE:
-		seq_printf(m, "%8s", "none");
-		break;
-	case CPIA_COMPRESSION_AUTO:
-		seq_printf(m, "%8s", "auto");
-		break;
-	case CPIA_COMPRESSION_MANUAL:
-		seq_printf(m, "%8s", "manual");
-		break;
-	default:
-		seq_printf(m, "%8s", "unknown");
-		break;
-	}
-	seq_printf(m, "    none,auto,manual      auto\n");
-	seq_printf(m, "decimation_enable:      %8s  %8s  %8s  %8s\n",
-		       cam->params.compression.decimation ==
-		       DECIMATION_ENAB ? "on":"off", "off", "on",
-		       "off");
-	seq_printf(m, "compression_target:    %9s %9s %9s %9s\n",
-		       cam->params.compressionTarget.frTargeting  ==
-		       CPIA_COMPRESSION_TARGET_FRAMERATE ?
-		       "framerate":"quality",
-		       "framerate", "quality", "quality");
-	seq_printf(m, "target_framerate:       %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionTarget.targetFR, 1, 30, 15);
-	seq_printf(m, "target_quality:         %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionTarget.targetQ, 1, 64, 5);
-	seq_printf(m, "y_threshold:            %8d  %8d  %8d  %8d\n",
-		       cam->params.yuvThreshold.yThreshold, 0, 31, 6);
-	seq_printf(m, "uv_threshold:           %8d  %8d  %8d  %8d\n",
-		       cam->params.yuvThreshold.uvThreshold, 0, 31, 6);
-	seq_printf(m, "hysteresis:             %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.hysteresis, 0, 255, 3);
-	seq_printf(m, "threshold_max:          %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.threshMax, 0, 255, 11);
-	seq_printf(m, "small_step:             %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.smallStep, 0, 255, 1);
-	seq_printf(m, "large_step:             %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.largeStep, 0, 255, 3);
-	seq_printf(m, "decimation_hysteresis:  %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.decimationHysteresis,
-		       0, 255, 2);
-	seq_printf(m, "fr_diff_step_thresh:    %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.frDiffStepThresh,
-		       0, 255, 5);
-	seq_printf(m, "q_diff_step_thresh:     %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.qDiffStepThresh,
-		       0, 255, 3);
-	seq_printf(m, "decimation_thresh_mod:  %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.decimationThreshMod,
-		       0, 255, 2);
-	/* QX3 specific entries */
-	if (cam->params.qx3.qx3_detected) {
-		seq_printf(m, "toplight:               %8s  %8s  %8s  %8s\n",
-			       cam->params.qx3.toplight ? "on" : "off",
-			       "off", "on", "off");
-		seq_printf(m, "bottomlight:            %8s  %8s  %8s  %8s\n",
-			       cam->params.qx3.bottomlight ? "on" : "off",
-			       "off", "on", "off");
-	}
-
-	return 0;
-}
-
-static int cpia_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, cpia_proc_show, PDE(inode)->data);
-}
-
-static int match(char *checkstr, char **buffer, size_t *count,
-		 int *find_colon, int *err)
-{
-	int ret, colon_found = 1;
-	int len = strlen(checkstr);
-	ret = (len <= *count && strncmp(*buffer, checkstr, len) == 0);
-	if (ret) {
-		*buffer += len;
-		*count -= len;
-		if (*find_colon) {
-			colon_found = 0;
-			while (*count && (**buffer == ' ' || **buffer == '\t' ||
-					  (!colon_found && **buffer == ':'))) {
-				if (**buffer == ':')
-					colon_found = 1;
-				--*count;
-				++*buffer;
-			}
-			if (!*count || !colon_found)
-				*err = -EINVAL;
-			*find_colon = 0;
-		}
-	}
-	return ret;
-}
-
-static unsigned long int value(char **buffer, size_t *count, int *err)
-{
-	char *p;
-	unsigned long int ret;
-	ret = simple_strtoul(*buffer, &p, 0);
-	if (p == *buffer)
-		*err = -EINVAL;
-	else {
-		*count -= p - *buffer;
-		*buffer = p;
-	}
-	return ret;
-}
-
-static ssize_t cpia_proc_write(struct file *file, const char __user *buf,
-			       size_t count, loff_t *pos)
-{
-	struct cam_data *cam = PDE(file->f_path.dentry->d_inode)->data;
-	struct cam_params new_params;
-	char *page, *buffer;
-	int retval, find_colon;
-	int size = count;
-	unsigned long val = 0;
-	u32 command_flags = 0;
-	u8 new_mains;
-
-	/*
-	 * This code to copy from buf to page is shamelessly copied
-	 * from the comx driver
-	 */
-	if (count > PAGE_SIZE) {
-		printk(KERN_ERR "count is %zu > %d!!!\n", count, (int)PAGE_SIZE);
-		return -ENOSPC;
-	}
-
-	if (!(page = (char *)__get_free_page(GFP_KERNEL))) return -ENOMEM;
-
-	if(copy_from_user(page, buf, count))
-	{
-		retval = -EFAULT;
-		goto out;
-	}
-
-	if (page[count-1] == '\n')
-		page[count-1] = '\0';
-	else if (count < PAGE_SIZE)
-		page[count] = '\0';
-	else if (page[count]) {
-		retval = -EINVAL;
-		goto out;
-	}
-
-	buffer = page;
-
-	if (mutex_lock_interruptible(&cam->param_lock))
-		return -ERESTARTSYS;
-
-	/*
-	 * Skip over leading whitespace
-	 */
-	while (count && isspace(*buffer)) {
-		--count;
-		++buffer;
-	}
-
-	memcpy(&new_params, &cam->params, sizeof(struct cam_params));
-	new_mains = cam->mainsFreq;
-
-#define MATCH(x) (match(x, &buffer, &count, &find_colon, &retval))
-#define VALUE (value(&buffer,&count, &retval))
-#define FIRMWARE_VERSION(x,y) (new_params.version.firmwareVersion == (x) && \
-			       new_params.version.firmwareRevision == (y))
-
-	retval = 0;
-	while (count && !retval) {
-		find_colon = 1;
-		if (MATCH("brightness")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 100)
-					new_params.colourParams.brightness = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURPARAMS;
-			if(new_params.flickerControl.allowableOverExposure < 0)
-				new_params.flickerControl.allowableOverExposure =
-					-find_over_exposure(new_params.colourParams.brightness);
-			if(new_params.flickerControl.flickerMode != 0)
-				command_flags |= COMMAND_SETFLICKERCTRL;
-
-		} else if (MATCH("contrast")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 100) {
-					/* contrast is in steps of 8, so round*/
-					val = ((val + 3) / 8) * 8;
-					/* 1-02 firmware limits contrast to 80*/
-					if (FIRMWARE_VERSION(1,2) && val > 80)
-						val = 80;
-
-					new_params.colourParams.contrast = val;
-				} else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURPARAMS;
-		} else if (MATCH("saturation")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 100)
-					new_params.colourParams.saturation = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURPARAMS;
-		} else if (MATCH("sensor_fps")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				/* find values so that sensorFPS is minimized,
-				 * but >= val */
-				if (val > 30)
-					retval = -EINVAL;
-				else if (val > 25) {
-					new_params.sensorFps.divisor = 0;
-					new_params.sensorFps.baserate = 1;
-				} else if (val > 15) {
-					new_params.sensorFps.divisor = 0;
-					new_params.sensorFps.baserate = 0;
-				} else if (val > 12) {
-					new_params.sensorFps.divisor = 1;
-					new_params.sensorFps.baserate = 1;
-				} else if (val > 7) {
-					new_params.sensorFps.divisor = 1;
-					new_params.sensorFps.baserate = 0;
-				} else if (val > 6) {
-					new_params.sensorFps.divisor = 2;
-					new_params.sensorFps.baserate = 1;
-				} else if (val > 3) {
-					new_params.sensorFps.divisor = 2;
-					new_params.sensorFps.baserate = 0;
-				} else {
-					new_params.sensorFps.divisor = 3;
-					/* Either base rate would work here */
-					new_params.sensorFps.baserate = 1;
-				}
-				new_params.flickerControl.coarseJump =
-					flicker_jumps[new_mains]
-					[new_params.sensorFps.baserate]
-					[new_params.sensorFps.divisor];
-				if (new_params.flickerControl.flickerMode)
-					command_flags |= COMMAND_SETFLICKERCTRL;
-			}
-			command_flags |= COMMAND_SETSENSORFPS;
-			cam->exposure_status = EXPOSURE_NORMAL;
-		} else if (MATCH("stream_start_line")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				int max_line = 288;
-
-				if (new_params.format.videoSize == VIDEOSIZE_QCIF)
-					max_line = 144;
-				if (val <= max_line)
-					new_params.streamStartLine = val/2;
-				else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("sub_sample")) {
-			if (!retval && MATCH("420"))
-				new_params.format.subSample = SUBSAMPLE_420;
-			else if (!retval && MATCH("422"))
-				new_params.format.subSample = SUBSAMPLE_422;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETFORMAT;
-		} else if (MATCH("yuv_order")) {
-			if (!retval && MATCH("YUYV"))
-				new_params.format.yuvOrder = YUVORDER_YUYV;
-			else if (!retval && MATCH("UYVY"))
-				new_params.format.yuvOrder = YUVORDER_UYVY;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETFORMAT;
-		} else if (MATCH("ecp_timing")) {
-			if (!retval && MATCH("normal"))
-				new_params.ecpTiming = 0;
-			else if (!retval && MATCH("slow"))
-				new_params.ecpTiming = 1;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETECPTIMING;
-		} else if (MATCH("color_balance_mode")) {
-			if (!retval && MATCH("manual"))
-				new_params.colourBalance.balanceMode = 3;
-			else if (!retval && MATCH("auto"))
-				new_params.colourBalance.balanceMode = 2;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETCOLOURBALANCE;
-		} else if (MATCH("red_gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 212) {
-					new_params.colourBalance.redGain = val;
-					new_params.colourBalance.balanceMode = 1;
-				} else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURBALANCE;
-		} else if (MATCH("green_gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 212) {
-					new_params.colourBalance.greenGain = val;
-					new_params.colourBalance.balanceMode = 1;
-				} else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURBALANCE;
-		} else if (MATCH("blue_gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 212) {
-					new_params.colourBalance.blueGain = val;
-					new_params.colourBalance.balanceMode = 1;
-				} else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURBALANCE;
-		} else if (MATCH("max_gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				/* 1-02 firmware limits gain to 2 */
-				if (FIRMWARE_VERSION(1,2) && val > 2)
-					val = 2;
-				switch(val) {
-				case 1:
-					new_params.exposure.gainMode = 1;
-					break;
-				case 2:
-					new_params.exposure.gainMode = 2;
-					break;
-				case 4:
-					new_params.exposure.gainMode = 3;