greybus: APBridge: move APBridge request protocol to a common .h file

This moves all of the APBridge request protocol commands that are
currently used to a common .h file for everyone to be able to use them
in the future, where needed.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>

3 files changed, 32 insertions, 32 deletions

diff --git a/drivers/staging/greybus/camera.c b/drivers/staging/greybus/camera.c
index ac9ade367e0a..783a435bbae6 100644
--- a/drivers/staging/greybus/camera.c
+++ b/drivers/staging/greybus/camera.c
@@ -73,9 +73,6 @@ struct gb_camera_stream_config {
  * Camera Protocol Operations
  */
 
-/* vendor request to control the CSI transmitter */
-#define REQUEST_CSI_TX_CONTROL	0x08
-
 struct ap_csi_config_request {
 	__u8 csi_id;
 	__u8 clock_mode;
@@ -169,13 +166,13 @@ static int gb_camera_configure_streams(struct gb_camera *gcam,
 		csi_cfg.num_lanes = 4;
 		csi_cfg.bus_freq = cpu_to_le32(960000000);
 		ret = gb_hd_output(gcam->connection->hd, &csi_cfg,
-				   sizeof(csi_cfg), REQUEST_CSI_TX_CONTROL,
-				   false);
+				   sizeof(csi_cfg),
+				   GB_APB_REQUEST_CSI_TX_CONTROL, false);
 	} else if (nstreams == 0) {
 		csi_cfg.csi_id = 1;
 		ret = gb_hd_output(gcam->connection->hd, &csi_cfg,
-				   sizeof(csi_cfg), REQUEST_CSI_TX_CONTROL,
-				   false);
+				   sizeof(csi_cfg),
+				   GB_APB_REQUEST_CSI_TX_CONTROL, false);
 	}
 
 	if (ret < 0)
diff --git a/drivers/staging/greybus/es2.c b/drivers/staging/greybus/es2.c
index 1b5487fec903..e39bd58e3a5c 100644
--- a/drivers/staging/greybus/es2.c
+++ b/drivers/staging/greybus/es2.c
@@ -44,25 +44,6 @@ MODULE_DEVICE_TABLE(usb, id_table);
  */
 #define NUM_CPORT_OUT_URB	(8 * NUM_BULKS)
 
-/* vendor request APB1 log */
-#define REQUEST_LOG		0x02
-
-/* vendor request to map a cport to bulk in and bulk out endpoints */
-#define REQUEST_EP_MAPPING	0x03
-
-/* vendor request to get the number of cports available */
-#define REQUEST_CPORT_COUNT	0x04
-
-/* vendor request to reset a cport state */
-#define REQUEST_RESET_CPORT	0x05
-
-/* vendor request to time the latency of messages on a given cport */
-#define REQUEST_LATENCY_TAG_EN	0x06
-#define REQUEST_LATENCY_TAG_DIS	0x07
-
-/* vendor request to control the CSI transmitter */
-#define REQUEST_CSI_TX_CONTROL	0x08
-
 /*
  * @endpoint: bulk in endpoint for CPort data
  * @urb: array of urbs for the CPort in messages
@@ -191,7 +172,7 @@ static int map_cport_to_ep(struct es2_ap_dev *es2,
 
 	retval = usb_control_msg(es2->usb_dev,
 				 usb_sndctrlpipe(es2->usb_dev, 0),
-				 REQUEST_EP_MAPPING,
+				 GB_APB_REQUEST_EP_MAPPING,
 				 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
 				 0x00, 0x00,
 				 (char *)cport_to_ep,
@@ -521,7 +502,7 @@ static int cport_reset(struct gb_host_device *hd, u16 cport_id)
 	int retval;
 
 	retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 REQUEST_RESET_CPORT,
+				 GB_APB_REQUEST_RESET_CPORT,
 				 USB_DIR_OUT | USB_TYPE_VENDOR |
 				 USB_RECIP_INTERFACE, cport_id, 0,
 				 NULL, 0, ES2_TIMEOUT);
@@ -559,7 +540,7 @@ static int latency_tag_enable(struct gb_host_device *hd, u16 cport_id)
 	}
 
 	retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 REQUEST_LATENCY_TAG_EN,
+				 GB_APB_REQUEST_LATENCY_TAG_EN,
 				 USB_DIR_OUT | USB_TYPE_VENDOR |
 				 USB_RECIP_INTERFACE, cport_id, 0, NULL,
 				 0, ES2_TIMEOUT);
@@ -582,7 +563,7 @@ static int latency_tag_disable(struct gb_host_device *hd, u16 cport_id)
 	}
 
 	retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 REQUEST_LATENCY_TAG_DIS,
+				 GB_APB_REQUEST_LATENCY_TAG_DIS,
 				 USB_DIR_OUT | USB_TYPE_VENDOR |
 				 USB_RECIP_INTERFACE, cport_id, 0, NULL,
 				 0, ES2_TIMEOUT);
@@ -756,7 +737,7 @@ static void apb_log_get(struct es2_ap_dev *es2, char *buf)
 	do {
 		retval = usb_control_msg(es2->usb_dev,
 					usb_rcvctrlpipe(es2->usb_dev, 0),
-					REQUEST_LOG,
+					GB_APB_REQUEST_LOG,
 					USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
 					0x00, 0x00,
 					buf,
@@ -885,7 +866,7 @@ static int apb_get_cport_count(struct usb_device *udev)
 		return -ENOMEM;
 
 	retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				 REQUEST_CPORT_COUNT,
+				 GB_APB_REQUEST_CPORT_COUNT,
 				 USB_DIR_IN | USB_TYPE_VENDOR |
 				 USB_RECIP_INTERFACE, 0, 0, cport_count,
 				 sizeof(*cport_count), ES2_TIMEOUT);
diff --git a/drivers/staging/greybus/greybus_protocols.h b/drivers/staging/greybus/greybus_protocols.h
index 67f260beba63..dfa3d29b78b3 100644
--- a/drivers/staging/greybus/greybus_protocols.h
+++ b/drivers/staging/greybus/greybus_protocols.h
@@ -154,6 +154,28 @@ struct gb_control_interface_version_response {
 } __packed;
 
 
+/* APBridge protocol */
+
+/* request APB1 log */
+#define GB_APB_REQUEST_LOG		0x02
+
+/* request to map a cport to bulk in and bulk out endpoints */
+#define GB_APB_REQUEST_EP_MAPPING	0x03
+
+/* request to get the number of cports available */
+#define GB_APB_REQUEST_CPORT_COUNT	0x04
+
+/* request to reset a cport state */
+#define GB_APB_REQUEST_RESET_CPORT	0x05
+
+/* request to time the latency of messages on a given cport */
+#define GB_APB_REQUEST_LATENCY_TAG_EN	0x06
+#define GB_APB_REQUEST_LATENCY_TAG_DIS	0x07
+
+/* request to control the CSI transmitter */
+#define GB_APB_REQUEST_CSI_TX_CONTROL	0x08
+
+
 /* Firmware Protocol */
 
 /* Version of the Greybus firmware protocol we support */