diff options
author | Simon Que <sque@chromium.org> | 2018-06-29 22:49:38 -0400 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2018-07-02 09:01:49 +0200 |
commit | 9a69f5087ccc20bb411025decab455836df04168 (patch) | |
tree | 92d560731f5c2ebcf237cc6a8e86480f4a4ec60e /drivers/staging/gasket/apex.h | |
parent | ee55fe552fcd8dcdafc52155ba515548c6538647 (diff) |
drivers/staging: Gasket driver framework + Apex driver
The Gasket (Google ASIC Software, Kernel Extensions, and Tools) kernel
framework is a generic, flexible system that supports thin kernel
drivers. Gasket kernel drivers are expected to handle opening and
closing devices, mmap'ing BAR space as requested, a small selection of
ioctls, and handling page table translation (covered below). Any other
functions should be handled by userspace code.
The Gasket common module is not enough to run a device. In order to
customize the Gasket code for a given piece of hardware, a device
specific module must be created. At a minimum, this module must define a
struct gasket_driver_desc containing the device-specific data for use by
the framework; in addition, the module must declare an __init function
that calls gasket_register_device with the module's gasket_driver_desc
struct. Finally, the driver must define an exit function that calls
gasket_unregister_device with the module's gasket_driver_desc struct.
One of the core assumptions of the Gasket framework is that precisely
one process is allowed to have an open write handle to the device node
at any given time. (That process may, once it has one write handle, open
any number of additional write handles.) This is accomplished by
tracking open and close data for each driver instance.
Signed-off-by: Rob Springer <rspringer@google.com>
Signed-off-by: John Joseph <jnjoseph@google.com>
Signed-off-by: Simon Que <sque@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/staging/gasket/apex.h')
-rw-r--r-- | drivers/staging/gasket/apex.h | 95 |
1 files changed, 95 insertions, 0 deletions
diff --git a/drivers/staging/gasket/apex.h b/drivers/staging/gasket/apex.h new file mode 100644 index 000000000000..f2600aa05191 --- /dev/null +++ b/drivers/staging/gasket/apex.h @@ -0,0 +1,95 @@ +/* + * Apex kernel-userspace interface definition(s). + * + * Copyright (C) 2018 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __APEX_H__ +#define __APEX_H__ + +#include <linux/ioctl.h> +#include <linux/bitops.h> + +#include "gasket.h" + +/* Structural definitions/macros. */ +/* The number of PCI BARs. */ +#define APEX_NUM_BARS 3 + +/* Size of a memory page in bytes, and the related number of bits to shift. */ +#define APEX_PAGE_SHIFT 12 +#define APEX_PAGE_SIZE BIT(APEX_PAGE_SHIFT) + +#define APEX_EXTENDED_SHIFT 63 /* Extended address bit position. */ + +/* Addresses are 2^3=8 bytes each. */ +/* page in second level page table */ +/* holds APEX_PAGE_SIZE/8 addresses */ +#define APEX_ADDR_SHIFT 3 +#define APEX_LEVEL_SHIFT (APEX_PAGE_SHIFT - APEX_ADDR_SHIFT) +#define APEX_LEVEL_SIZE BIT(APEX_LEVEL_SHIFT) + +#define APEX_PAGE_TABLE_MAX 65536 +#define APEX_SIMPLE_PAGE_MAX APEX_PAGE_TABLE_MAX +#define APEX_EXTENDED_PAGE_MAX (APEX_PAGE_TABLE_MAX << APEX_LEVEL_SHIFT) + +/* Check reset 120 times */ +#define APEX_RESET_RETRY 120 +/* Wait 100 ms between checks. Total 12 sec wait maximum. */ +#define APEX_RESET_DELAY 100 + +#define APEX_CHIP_INIT_DONE 2 +#define APEX_RESET_ACCEPTED 0 + +enum apex_reset_types { + APEX_CHIP_REINIT_RESET = 3, +}; + +/* Interrupt defines */ +/* Gasket device interrupts enums must be dense (i.e., no empty slots). */ +enum apex_interrupt { + APEX_INTERRUPT_INSTR_QUEUE = 0, + APEX_INTERRUPT_INPUT_ACTV_QUEUE = 1, + APEX_INTERRUPT_PARAM_QUEUE = 2, + APEX_INTERRUPT_OUTPUT_ACTV_QUEUE = 3, + APEX_INTERRUPT_SC_HOST_0 = 4, + APEX_INTERRUPT_SC_HOST_1 = 5, + APEX_INTERRUPT_SC_HOST_2 = 6, + APEX_INTERRUPT_SC_HOST_3 = 7, + APEX_INTERRUPT_TOP_LEVEL_0 = 8, + APEX_INTERRUPT_TOP_LEVEL_1 = 9, + APEX_INTERRUPT_TOP_LEVEL_2 = 10, + APEX_INTERRUPT_TOP_LEVEL_3 = 11, + APEX_INTERRUPT_FATAL_ERR = 12, + APEX_INTERRUPT_COUNT = 13, +}; + +/* + * Clock Gating ioctl. + */ +struct apex_gate_clock_ioctl { + /* Enter or leave clock gated state. */ + u64 enable; + + /* If set, enter clock gating state, regardless of custom block's + * internal idle state + */ + u64 force_idle; +}; + +/* Base number for all Apex-common IOCTLs */ +#define APEX_IOCTL_BASE 0x7F + +/* Enable/Disable clock gating. */ +#define APEX_IOCTL_GATE_CLOCK \ + _IOW(APEX_IOCTL_BASE, 0, struct apex_gate_clock_ioctl) + +#endif /* __APEX_H__ */ |