spi: remove i.MX SPI driver

This driver is in a non working state at the moment and will be replaced
by a bitbang driver which can also handle the newer i.MX variants

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: David Brownell <david-b@pacbell.net>
Acked-by: Andrea Paterniani <a.paterniani@swapp-eng.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 1770 deletions

diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
deleted file mode 100644
index c195e45f7f35..000000000000
--- a/drivers/spi/spi_imx.c
+++ /dev/null
@@ -1,1770 +0,0 @@
-/*
- * drivers/spi/spi_imx.c
- *
- * Copyright (C) 2006 SWAPP
- *	Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- *	linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/workqueue.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-
-#include <mach/hardware.h>
-#include <mach/imx-dma.h>
-#include <mach/spi_imx.h>
-
-/*-------------------------------------------------------------------------*/
-/* SPI Registers offsets from peripheral base address */
-#define SPI_RXDATA		(0x00)
-#define SPI_TXDATA		(0x04)
-#define SPI_CONTROL		(0x08)
-#define SPI_INT_STATUS		(0x0C)
-#define SPI_TEST		(0x10)
-#define SPI_PERIOD		(0x14)
-#define SPI_DMA			(0x18)
-#define SPI_RESET		(0x1C)
-
-/* SPI Control Register Bit Fields & Masks */
-#define SPI_CONTROL_BITCOUNT_MASK	(0xF)		/* Bit Count Mask */
-#define SPI_CONTROL_BITCOUNT(n)		(((n) - 1) & SPI_CONTROL_BITCOUNT_MASK)
-#define SPI_CONTROL_POL			(0x1 << 4)      /* Clock Polarity Mask */
-#define SPI_CONTROL_POL_ACT_HIGH	(0x0 << 4)      /* Active high pol. (0=idle) */
-#define SPI_CONTROL_POL_ACT_LOW		(0x1 << 4)      /* Active low pol. (1=idle) */
-#define SPI_CONTROL_PHA			(0x1 << 5)      /* Clock Phase Mask */
-#define SPI_CONTROL_PHA_0		(0x0 << 5)      /* Clock Phase 0 */
-#define SPI_CONTROL_PHA_1		(0x1 << 5)      /* Clock Phase 1 */
-#define SPI_CONTROL_SSCTL		(0x1 << 6)      /* /SS Waveform Select Mask */
-#define SPI_CONTROL_SSCTL_0		(0x0 << 6)      /* Master: /SS stays low between SPI burst
-							   Slave: RXFIFO advanced by BIT_COUNT */
-#define SPI_CONTROL_SSCTL_1		(0x1 << 6)      /* Master: /SS insert pulse between SPI burst
-							   Slave: RXFIFO advanced by /SS rising edge */
-#define SPI_CONTROL_SSPOL		(0x1 << 7)      /* /SS Polarity Select Mask */
-#define SPI_CONTROL_SSPOL_ACT_LOW	(0x0 << 7)      /* /SS Active low */
-#define SPI_CONTROL_SSPOL_ACT_HIGH	(0x1 << 7)      /* /SS Active high */
-#define SPI_CONTROL_XCH			(0x1 << 8)      /* Exchange */
-#define SPI_CONTROL_SPIEN		(0x1 << 9)      /* SPI Module Enable */
-#define SPI_CONTROL_MODE		(0x1 << 10)     /* SPI Mode Select Mask */
-#define SPI_CONTROL_MODE_SLAVE		(0x0 << 10)     /* SPI Mode Slave */
-#define SPI_CONTROL_MODE_MASTER		(0x1 << 10)     /* SPI Mode Master */
-#define SPI_CONTROL_DRCTL		(0x3 << 11)     /* /SPI_RDY Control Mask */
-#define SPI_CONTROL_DRCTL_0		(0x0 << 11)     /* Ignore /SPI_RDY */
-#define SPI_CONTROL_DRCTL_1		(0x1 << 11)     /* /SPI_RDY falling edge triggers input */
-#define SPI_CONTROL_DRCTL_2		(0x2 << 11)     /* /SPI_RDY active low level triggers input */
-#define SPI_CONTROL_DATARATE		(0x7 << 13)     /* Data Rate Mask */
-#define SPI_PERCLK2_DIV_MIN		(0)		/* PERCLK2:4 */
-#define SPI_PERCLK2_DIV_MAX		(7)		/* PERCLK2:512 */
-#define SPI_CONTROL_DATARATE_MIN	(SPI_PERCLK2_DIV_MAX << 13)
-#define SPI_CONTROL_DATARATE_MAX	(SPI_PERCLK2_DIV_MIN << 13)
-#define SPI_CONTROL_DATARATE_BAD	(SPI_CONTROL_DATARATE_MIN + 1)
-
-/* SPI Interrupt/Status Register Bit Fields & Masks */
-#define SPI_STATUS_TE	(0x1 << 0)	/* TXFIFO Empty Status */
-#define SPI_STATUS_TH	(0x1 << 1)      /* TXFIFO Half Status */
-#define SPI_STATUS_TF	(0x1 << 2)      /* TXFIFO Full Status */
-#define SPI_STATUS_RR	(0x1 << 3)      /* RXFIFO Data Ready Status */
-#define SPI_STATUS_RH	(0x1 << 4)      /* RXFIFO Half Status */
-#define SPI_STATUS_RF	(0x1 << 5)      /* RXFIFO Full Status */
-#define SPI_STATUS_RO	(0x1 << 6)      /* RXFIFO Overflow */
-#define SPI_STATUS_BO	(0x1 << 7)      /* Bit Count Overflow */
-#define SPI_STATUS	(0xFF)		/* SPI Status Mask */
-#define SPI_INTEN_TE	(0x1 << 8)      /* TXFIFO Empty Interrupt Enable */
-#define SPI_INTEN_TH	(0x1 << 9)      /* TXFIFO Half Interrupt Enable */
-#define SPI_INTEN_TF	(0x1 << 10)     /* TXFIFO Full Interrupt Enable */
-#define SPI_INTEN_RE	(0x1 << 11)     /* RXFIFO Data Ready Interrupt Enable */
-#define SPI_INTEN_RH	(0x1 << 12)     /* RXFIFO Half Interrupt Enable */
-#define SPI_INTEN_RF	(0x1 << 13)     /* RXFIFO Full Interrupt Enable */
-#define SPI_INTEN_RO	(0x1 << 14)     /* RXFIFO Overflow Interrupt Enable */
-#define SPI_INTEN_BO	(0x1 << 15)     /* Bit Count Overflow Interrupt Enable */
-#define SPI_INTEN	(0xFF << 8)	/* SPI Interrupt Enable Mask */
-
-/* SPI Test Register Bit Fields & Masks */
-#define SPI_TEST_TXCNT		(0xF << 0)	/* TXFIFO Counter */
-#define SPI_TEST_RXCNT_LSB	(4)		/* RXFIFO Counter LSB */
-#define SPI_TEST_RXCNT		(0xF << 4)	/* RXFIFO Counter */
-#define SPI_TEST_SSTATUS	(0xF << 8)	/* State Machine Status */
-#define SPI_TEST_LBC		(0x1 << 14)	/* Loop Back Control */
-
-/* SPI Period Register Bit Fields & Masks */
-#define SPI_PERIOD_WAIT		(0x7FFF << 0)	/* Wait Between Transactions */
-#define SPI_PERIOD_MAX_WAIT	(0x7FFF)	/* Max Wait Between
-							Transactions */
-#define SPI_PERIOD_CSRC		(0x1 << 15)	/* Period Clock Source Mask */
-#define SPI_PERIOD_CSRC_BCLK	(0x0 << 15)	/* Period Clock Source is
-							Bit Clock */
-#define SPI_PERIOD_CSRC_32768	(0x1 << 15)	/* Period Clock Source is
-							32.768 KHz Clock */
-
-/* SPI DMA Register Bit Fields & Masks */
-#define SPI_DMA_RHDMA	(0x1 << 4)	/* RXFIFO Half Status */
-#define SPI_DMA_RFDMA	(0x1 << 5)      /* RXFIFO Full Status */
-#define SPI_DMA_TEDMA	(0x1 << 6)      /* TXFIFO Empty Status */
-#define SPI_DMA_THDMA	(0x1 << 7)      /* TXFIFO Half Status */
-#define SPI_DMA_RHDEN	(0x1 << 12)	/* RXFIFO Half DMA Request Enable */
-#define SPI_DMA_RFDEN	(0x1 << 13)     /* RXFIFO Full DMA Request Enable */
-#define SPI_DMA_TEDEN	(0x1 << 14)     /* TXFIFO Empty DMA Request Enable */
-#define SPI_DMA_THDEN	(0x1 << 15)     /* TXFIFO Half DMA Request Enable */
-
-/* SPI Soft Reset Register Bit Fields & Masks */
-#define SPI_RESET_START	(0x1)		/* Start */
-
-/* Default SPI configuration values */
-#define SPI_DEFAULT_CONTROL		\
-(					\
-	SPI_CONTROL_BITCOUNT(16) | 	\
-	SPI_CONTROL_POL_ACT_HIGH |	\
-	SPI_CONTROL_PHA_0 |		\
-	SPI_CONTROL_SPIEN |		\
-	SPI_CONTROL_SSCTL_1 |		\
-	SPI_CONTROL_MODE_MASTER |	\
-	SPI_CONTROL_DRCTL_0 |		\
-	SPI_CONTROL_DATARATE_MIN	\
-)
-#define SPI_DEFAULT_ENABLE_LOOPBACK	(0)
-#define SPI_DEFAULT_ENABLE_DMA		(0)
-#define SPI_DEFAULT_PERIOD_WAIT		(8)
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/* TX/RX SPI FIFO size */
-#define SPI_FIFO_DEPTH			(8)
-#define SPI_FIFO_BYTE_WIDTH		(2)
-#define SPI_FIFO_OVERFLOW_MARGIN	(2)
-
-/* DMA burst length for half full/empty request trigger */
-#define SPI_DMA_BLR			(SPI_FIFO_DEPTH * SPI_FIFO_BYTE_WIDTH / 2)
-
-/* Dummy char output to achieve reads.
-   Choosing something different from all zeroes may help pattern recogition
-   for oscilloscope analysis, but may break some drivers. */
-#define SPI_DUMMY_u8			0
-#define SPI_DUMMY_u16			((SPI_DUMMY_u8 << 8) | SPI_DUMMY_u8)
-#define SPI_DUMMY_u32			((SPI_DUMMY_u16 << 16) | SPI_DUMMY_u16)
-
-/**
- * Macro to change a u32 field:
- * @r : register to edit
- * @m : bit mask
- * @v : new value for the field correctly bit-alligned
-*/
-#define u32_EDIT(r, m, v)		r = (r & ~(m)) | (v)
-
-/* Message state */
-#define START_STATE			((void*)0)
-#define RUNNING_STATE			((void*)1)
-#define DONE_STATE			((void*)2)
-#define ERROR_STATE			((void*)-1)
-
-/* Queue state */
-#define QUEUE_RUNNING			(0)
-#define QUEUE_STOPPED			(1)
-
-#define IS_DMA_ALIGNED(x) 		(((u32)(x) & 0x03) == 0)
-#define DMA_ALIGNMENT			4
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/* Driver data structs */
-
-/* Context */
-struct driver_data {
-	/* Driver model hookup */
-	struct platform_device *pdev;
-
-	/* SPI framework hookup */
-	struct spi_master *master;
-
-	/* IMX hookup */
-	struct spi_imx_master *master_info;
-
-	/* Memory resources and SPI regs virtual address */
-	struct resource *ioarea;
-	void __iomem *regs;
-
-	/* SPI RX_DATA physical address */
-	dma_addr_t rd_data_phys;
-
-	/* Driver message queue */
-	struct workqueue_struct	*workqueue;
-	struct work_struct work;
-	spinlock_t lock;
-	struct list_head queue;
-	int busy;
-	int run;
-
-	/* Message Transfer pump */
-	struct tasklet_struct pump_transfers;
-
-	/* Current message, transfer and state */
-	struct spi_message *cur_msg;
-	struct spi_transfer *cur_transfer;
-	struct chip_data *cur_chip;
-
-	/* Rd / Wr buffers pointers */
-	size_t len;
-	void *tx;
-	void *tx_end;
-	void *rx;
-	void *rx_end;
-
-	u8 rd_only;
-	u8 n_bytes;
-	int cs_change;
-
-	/* Function pointers */
-	irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
-	void (*cs_control)(u32 command);
-
-	/* DMA setup */
-	int rx_channel;
-	int tx_channel;
-	dma_addr_t rx_dma;
-	dma_addr_t tx_dma;
-	int rx_dma_needs_unmap;
-	int tx_dma_needs_unmap;
-	size_t tx_map_len;
-	u32 dummy_dma_buf ____cacheline_aligned;
-
-	struct clk *clk;
-};
-
-/* Runtime state */
-struct chip_data {
-	u32 control;
-	u32 period;
-	u32 test;
-
-	u8 enable_dma:1;
-	u8 bits_per_word;
-	u8 n_bytes;
-	u32 max_speed_hz;
-
-	void (*cs_control)(u32 command);
-};
-/*-------------------------------------------------------------------------*/
-
-
-static void pump_messages(struct work_struct *work);
-
-static void flush(struct driver_data *drv_data)
-{
-	void __iomem *regs = drv_data->regs;
-	u32 control;
-
-	dev_dbg(&drv_data->pdev->dev, "flush\n");
-
-	/* Wait for end of transaction */
-	do {
-		control = readl(regs + SPI_CONTROL);
-	} while (control & SPI_CONTROL_XCH);
-
-	/* Release chip select if requested, transfer delays are
-	   handled in pump_transfers */
-	if (drv_data->cs_change)
-		drv_data->cs_control(SPI_CS_DEASSERT);
-
-	/* Disable SPI to flush FIFOs */
-	writel(control & ~SPI_CONTROL_SPIEN, regs + SPI_CONTROL);
-	writel(control, regs + SPI_CONTROL);
-}
-
-static void restore_state(struct driver_data *drv_data)
-{
-	void __iomem *regs = drv_data->regs;
-	struct chip_data *chip = drv_data->cur_chip;
-
-	/* Load chip registers */
-	dev_dbg(&drv_data->pdev->dev,
-		"restore_state\n"
-		"    test    = 0x%08X\n"
-		"    control = 0x%08X\n",
-		chip->test,
-		chip->control);
-	writel(chip->test, regs + SPI_TEST);
-	writel(chip->period, regs + SPI_PERIOD);
-	writel(0, regs + SPI_INT_STATUS);
-	writel(chip->control, regs + SPI_CONTROL);
-}
-
-static void null_cs_control(u32 command)
-{
-}
-
-static inline u32 data_to_write(struct driver_data *drv_data)
-{
-	return ((u32)(drv_data->tx_end - drv_data->tx)) / drv_data->n_bytes;
-}
-
-static inline u32 data_to_read(struct driver_data *drv_data)
-{
-	return ((u32)(drv_data->rx_end - drv_data->rx)) / drv_data->n_bytes;
-}
-
-static int write(struct driver_data *drv_data)
-{
-	void __iomem *regs = drv_data->regs;
-	void *tx = drv_data->tx;
-	void *tx_end = drv_data->tx_end;
-	u8 n_bytes = drv_data->n_bytes;
-	u32 remaining_writes;
-	u32 fifo_avail_space;
-	u32 n;
-	u16 d;
-
-	/* Compute how many fifo writes to do */
-	remaining_writes = (u32)(tx_end - tx) / n_bytes;
-	fifo_avail_space = SPI_FIFO_DEPTH -
-				(readl(regs + SPI_TEST) & SPI_TEST_TXCNT);
-	if (drv_data->rx && (fifo_avail_space > SPI_FIFO_OVERFLOW_MARGIN))
-		/* Fix misunderstood receive overflow */
-		fifo_avail_space -= SPI_FIFO_OVERFLOW_MARGIN;
-	n = min(remaining_writes, fifo_avail_space);
-
-	dev_dbg(&drv_data->pdev->dev,
-		"write type %s\n"
-		"    remaining writes = %d\n"
-		"    fifo avail space = %d\n"
-		"    fifo writes      = %d\n",
-		(n_bytes == 1) ? "u8" : "u16",
-		remaining_writes,
-		fifo_avail_space,
-		n);
-
-	if (n > 0) {
-		/* Fill SPI TXFIFO */
-		if (drv_data->rd_only) {
-			tx += n * n_bytes;
-			while (n--)
-				writel(SPI_DUMMY_u16, regs + SPI_TXDATA);
-		} else {
-			if (n_bytes == 1) {
-				while (n--) {
-					d = *(u8*)tx;
-					writel(d, regs + SPI_TXDATA);
-					tx += 1;
-				}
-			} else {
-				while (n--) {
-					d = *(u16*)tx;
-					writel(d, regs + SPI_TXDATA);
-					tx += 2;
-				}
-			}
-		}
-
-		/* Trigger transfer */
-		writel(readl(regs + SPI_CONTROL) | SPI_CONTROL_XCH,
-			regs + SPI_CONTROL);
-
-		/* Update tx pointer */
-		drv_data->tx = tx;
-	}
-
-	return (tx >= tx_end);
-}
-
-static int read(struct driver_data *drv_data)
-{
-	void __iomem *regs = drv_data->regs;
-	void *rx = drv_data->rx;
-	void *rx_end = drv_data->rx_end;
-	u8 n_bytes = drv_data->n_bytes;
-	u32 remaining_reads;
-	u32 fifo_rxcnt;
-	u32 n;
-	u16 d;
-
-	/* Compute how many fifo reads to do */
-	remaining_reads = (u32)(rx_end - rx) / n_bytes;
-	fifo_rxcnt = (readl(regs + SPI_TEST) & SPI_TEST_RXCNT) >>
-			SPI_TEST_RXCNT_LSB;
-	n = min(remaining_reads, fifo_rxcnt);
-
-	dev_dbg(&drv_data->pdev->dev,
-		"read type %s\n"
-		"    remaining reads = %d\n"
-		"    fifo rx count   = %d\n"
-		"    fifo reads      = %d\n",
-		(n_bytes == 1) ? "u8" : "u16",
-		remaining_reads,
-		fifo_rxcnt,
-		n);
-
-	if (n > 0) {
-		/* Read SPI RXFIFO */
-		if (n_bytes == 1) {
-			while (n--) {
-				d = readl(regs + SPI_RXDATA);
-				*((u8*)rx) = d;
-				rx += 1;
-			}
-		} else {
-			while (n--) {
-				d = readl(regs + SPI_RXDATA);
-				*((u16*)rx) = d;
-				rx += 2;
-			}
-		}
-
-		/* Update rx pointer */
-		drv_data->rx = rx;
-	}
-
-	return (rx >= rx_end);
-}
-
-static void *next_transfer(struct driver_data *drv_data)
-{
-	struct spi_message *msg = drv_data->cur_msg;
-	struct spi_transfer *trans = drv_data->cur_transfer;
-
-	/* Move to next transfer */
-	if (trans->transfer_list.next != &msg->transfers) {
-		drv_data->cur_transfer =
-			list_entry(trans->transfer_list.next,
-					struct spi_transfer,
-					transfer_list);
-		return RUNNING_STATE;
-	}
-
-	return DONE_STATE;
-}
-
-static int map_dma_buffers(struct driver_data *drv_data)
-{
-	struct spi_message *msg;
-	struct device *dev;
-	void *buf;
-
-	drv_data->rx_dma_needs_unmap = 0;
-	drv_data->tx_dma_needs_unmap = 0;
-
-	if (!drv_data->master_info->enable_dma ||
-		!drv_data->cur_chip->enable_dma)
-			return -1;
-
-	msg = drv_data->cur_msg;
-	dev = &msg->spi->dev;
-	if (msg->is_dma_mapped) {
-		if (drv_data->tx_dma)
-			/* The caller provided at least dma and cpu virtual
-			   address for write; pump_transfers() will consider the
-			   transfer as write only if cpu rx virtual address is
-			   NULL */
-			return 0;
-
-		if (drv_data->rx_dma) {
-			/* The caller provided dma and cpu virtual address to
-			   performe read only transfer -->
-			   use drv_data->dummy_dma_buf for dummy writes to
-			   achive reads */
-			buf = &drv_data->dummy_dma_buf;
-			drv_data->tx_map_len = sizeof(drv_data->dummy_dma_buf);
-			drv_data->tx_dma = dma_map_single(dev,
-							buf,
-							drv_data->tx_map_len,
-							DMA_TO_DEVICE);
-			if (dma_mapping_error(dev, drv_data->tx_dma))
-				return -1;
-
-			drv_data->tx_dma_needs_unmap = 1;
-
-			/* Flags transfer as rd_only for pump_transfers() DMA
-			   regs programming (should be redundant) */
-			drv_data->tx = NULL;
-
-			return 0;
-		}
-	}
-
-	if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
-		return -1;
-
-	if (drv_data->tx == NULL) {
-		/* Read only message --> use drv_data->dummy_dma_buf for dummy
-		   writes to achive reads */
-		buf = &drv_data->dummy_dma_buf;
-		drv_data->tx_map_len = sizeof(drv_data->dummy_dma_buf);
-	} else {
-		buf = drv_data->tx;
-		drv_data->tx_map_len = drv_data->len;
-	}
-	drv_data->tx_dma = dma_map_single(dev,
-					buf,
-					drv_data->tx_map_len,
-					DMA_TO_DEVICE);
-	if (dma_mapping_error(dev, drv_data->tx_dma))
-		return -1;
-	drv_data->tx_dma_needs_unmap = 1;
-
-	/* NULL rx means write-only transfer and no map needed
-	 * since rx DMA will not be used */
-	if (drv_data->rx) {
-		buf = drv_data->rx;
-		drv_data->rx_dma = dma_map_single(dev,
-						buf,
-						drv_data->len,
-						DMA_FROM_DEVICE);
-		if (dma_mapping_error(dev, drv_data->rx_dma)) {
-			if (drv_data->tx_dma) {
-				dma_unmap_single(dev,
-						drv_data->tx_dma,
-						drv_data->tx_map_len,
-						DMA_TO_DEVICE);
-				drv_data->tx_dma_needs_unmap = 0;
-			}
-			return -1;
-		}
-		drv_data->rx_dma_needs_unmap = 1;
-	}
-
-	return 0;
-}
-
-static void unmap_dma_buffers(struct driver_data *drv_data)
-{
-	struct spi_message *msg = drv_data->cur_msg;
-	struct device *dev = &msg->spi->dev;
-
-	if (drv_data->rx_dma_needs_unmap) {
-		dma_unmap_single(dev,
-				drv_data->rx_dma,
-				drv_data->len,
-				DMA_FROM_DEVICE);
-		drv_data->rx_dma_needs_unmap = 0;
-	}
-	if (drv_data->tx_dma_needs_unmap) {
-		dma_unmap_single(dev,
-				drv_data->tx_dma,
-				drv_data->tx_map_len,
-				DMA_TO_DEVICE);
-		drv_data->tx_dma_needs_unmap = 0;
-	}
-}
-
-/* Caller already set message->status (dma is already blocked) */
-static void giveback(struct spi_message *message, struct driver_data *drv_data)
-{
-	void __iomem *regs = drv_data->regs;
-
-	/* Bring SPI to sleep; restore_state() and pump_transfer()
-	   will do new setup */
-	writel(0, regs + SPI_INT_STATUS);
-	writel(0, regs + SPI_DMA);
-
-	/* Unconditioned deselct */
-	drv_data->cs_control(SPI_CS_DEASSERT);
-
-	message->state = NULL;
-	if (message->complete)
-		message->complete(message->context);
-
-	drv_data->cur_msg = NULL;
-	drv_data->cur_transfer = NULL;
-	drv_data->cur_chip = NULL;
-	queue_work(drv_data->workqueue, &drv_data->work);
-}
-
-static void dma_err_handler(int channel, void *data, int errcode)
-{
-	struct driver_data *drv_data = data;
-	struct spi_message *msg = drv_data->cur_msg;
-
-	dev_dbg(&drv_data->pdev->dev, "dma_err_handler\n");
-
-	/* Disable both rx and tx dma channels */
-	imx_dma_disable(drv_data->rx_channel);
-	imx_dma_disable(drv_data->tx_channel);
-	unmap_dma_buffers(drv_data);
-
-	flush(drv_data);
-
-	msg->state = ERROR_STATE;
-	tasklet_schedule(&drv_data->pump_transfers);
-}
-
-static void dma_tx_handler(int channel, void *data)
-{
-	struct driver_data *drv_data = data;
-
-	dev_dbg(&drv_data->pdev->dev, "dma_tx_handler\n");
-
-	imx_dma_disable(channel);
-
-	/* Now waits for TX FIFO empty */
-	writel(SPI_INTEN_TE, drv_data->regs + SPI_INT_STATUS);
-}
-
-static irqreturn_t dma_transfer(struct driver_data *drv_data)
-{
-	u32 status;
-	struct spi_message *msg = drv_data->cur_msg;
-	void __iomem *regs = drv_data->regs;
-
-	status = readl(regs + SPI_INT_STATUS);
-
-	if ((status & (SPI_INTEN_RO | SPI_STATUS_RO))
-			== (SPI_INTEN_RO | SPI_STATUS_RO)) {
-		writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS);
-
-		imx_dma_disable(drv_data->tx_channel);
-		imx_dma_disable(drv_data->rx_channel);
-		unmap_dma_buffers(drv_data);
-
-		flush(drv_data);
-
-		dev_warn(&drv_data->pdev->dev,
-				"dma_transfer - fifo overun\n");
-
-		msg->state = ERROR_STATE;
-		tasklet_schedule(&drv_data->pump_transfers);
-
-		return IRQ_HANDLED;
-	}
-
-	if (status & SPI_STATUS_TE) {
-		writel(status & ~SPI_INTEN_TE, regs + SPI_INT_STATUS);
-
-		if (drv_data->rx) {
-			/* Wait end of transfer before read trailing data */
-			while (readl(regs + SPI_CONTROL) & SPI_CONTROL_XCH)
-				cpu_relax();
-
-			imx_dma_disable(drv_data->rx_channel);
-			unmap_dma_buffers(drv_data);
-
-			/* Release chip select if requested, transfer delays are
-			   handled in pump_transfers() */
-			if (drv_data->cs_change)
-				drv_data->cs_control(SPI_CS_DEASSERT);
-
-			/* Calculate number of trailing data and read them */
-			dev_dbg(&drv_data->pdev->dev,
-				"dma_transfer - test = 0x%08X\n",
-				readl(regs + SPI_TEST));
-			drv_data->rx = drv_data->rx_end -
-					((readl(regs + SPI_TEST) &
-					SPI_TEST_RXCNT) >>
-					SPI_TEST_RXCNT_LSB)*drv_data->n_bytes;
-			read(drv_data);
-		} else {
-			/* Write only transfer */
-			unmap_dma_buffers(drv_data);
-
-			flush(drv_data);
-		}
-
-		/* End of transfer, update total byte transfered */
-		msg->actual_length += drv_data->len;
-
-		/* Move to next transfer */
-		msg->state = next_transfer(drv_data);
-
-		/* Schedule transfer tasklet */
-		tasklet_schedule(&drv_data->pump_transfers);
-
-		return IRQ_HANDLED;
-	}
-
-	/* Opps problem detected */
-	return IRQ_NONE;
-}
-
-static irqreturn_t interrupt_wronly_transfer(struct driver_data *drv_data)
-{
-	struct spi_message *msg = drv_data->cur_msg;
-	void __iomem *regs = drv_data->regs;
-	u32 status;
-	irqreturn_t handled = IRQ_NONE;
-
-	status = readl(regs + SPI_INT_STATUS);
-
-	if (status & SPI_INTEN_TE) {
-		/* TXFIFO Empty Interrupt on the last transfered word */
-		writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS);
-		dev_dbg(&drv_data->pdev->dev,
-			"interrupt_wronly_transfer - end of tx\n");
-
-		flush(drv_data);
-
-		/* Update total byte transfered */
-		msg->actual_length += drv_data->len;
-
-		/* Move to next transfer */
-		msg->state = next_transfer(drv_data);
-
-		/* Schedule transfer tasklet */
-		tasklet_schedule(&drv_data->pump_transfers);
-
-		return IRQ_HANDLED;
-	} else {
-		while (status & SPI_STATUS_TH) {
-			dev_dbg(&drv_data->pdev->dev,
-				"interrupt_wronly_transfer - status = 0x%08X\n",
-				status);
-
-			/* Pump data */
-			if (write(drv_data)) {
-				/* End of TXFIFO writes,
-				   now wait until TXFIFO is empty */
-				writel(SPI_INTEN_TE, regs + SPI_INT_STATUS);
-				return IRQ_HANDLED;
-			}
-
-			status = readl(regs + SPI_INT_STATUS);
-
-			/* We did something */
-			handled = IRQ_HANDLED;
-		}
-	}
-
-	return handled;
-}
-
-static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
-{
-	struct spi_message *msg = drv_data->cur_msg;
-	void __iomem *regs = drv_data->regs;
-	u32 status, control;
-	irqreturn_t handled = IRQ_NONE;
-	unsigned long limit;
-
-	status = readl(regs + SPI_INT_STATUS);
-
-	if (status & SPI_INTEN_TE) {
-		/* TXFIFO Empty Interrupt on the last transfered word */
-		writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS);
-		dev_dbg(&drv_data->pdev->dev,
-			"interrupt_transfer - end of tx\n");
-
-		if (msg->state == ERROR_STATE) {
-			/* RXFIFO overrun was detected and message aborted */
-			flush(drv_data);
-		} else {
-			/* Wait for end of transaction */
-			do {
-				control = readl(regs + SPI_CONTROL);
-			} while (control & SPI_CONTROL_XCH);
-
-			/* Release chip select if requested, transfer delays are
-			   handled in pump_transfers */
-			if (drv_data->cs_change)
-				drv_data->cs_control(SPI_CS_DEASSERT);
-
-			/* Read trailing bytes */
-			limit = loops_per_jiffy << 1;
-			while ((read(drv_data) == 0) && --limit)
-				cpu_relax();
-
-			if (limit == 0)
-				dev_err(&drv_data->pdev->dev,
-					"interrupt_transfer - "
-					"trailing byte read failed\n");
-			else
-				dev_dbg(&drv_data->pdev->dev,
-					"interrupt_transfer - end of rx\n");
-
-			/* Update total byte transfered */
-			msg->actual_length += drv_data->len;
-
-			/* Move to next transfer */
-			msg->state = next_transfer(drv_data);
-		}
-
-		/* Schedule transfer tasklet */
-		tasklet_schedule(&drv_data->pump_transfers);
-
-		return IRQ_HANDLED;
-	} else {
-		while (status & (SPI_STATUS_TH | SPI_STATUS_RO)) {
-			dev_dbg(&drv_data->pdev->dev,
-				"interrupt_transfer - status = 0x%08X\n",
-				status);
-
-			if (status & SPI_STATUS_RO) {
-				/* RXFIFO overrun, abort message end wait
-				   until TXFIFO is empty */
-				writel(SPI_INTEN_TE, regs + SPI_INT_STATUS);
-
-				dev_warn(&drv_data->pdev->dev,
-					"interrupt_transfer - fifo overun\n"
-					"    data not yet written = %d\n"
-					"    data not yet read    = %d\n",
-					data_to_write(drv_data),
-					data_to_read(drv_data));
-
-				msg->state = ERROR_STATE;
-
-				return IRQ_HANDLED;
-			}
-
-			/* Pump data */
-			read(drv_data);
-			if (write(drv_data)) {
-				/* End of TXFIFO writes,
-				   now wait until TXFIFO is empty */
-				writel(SPI_INTEN_TE, regs + SPI_INT_STATUS);
-				return IRQ_HANDLED;
-			}
-
-			status = readl(regs + SPI_INT_STATUS);
-
-			/* We did something */
-			handled = IRQ_HANDLED;
-		}
-	}
-
-	return handled;
-}
-
-static irqreturn_t spi_int(int irq, void *dev_id)
-{
-	struct driver_data *drv_data = (struct driver_data *)dev_id;
-
-	if (!drv_data->cur_msg) {
-		dev_err(&drv_data->pdev->dev,
-			"spi_int - bad message state\n");
-		/* Never fail */
-		return IRQ_HANDLED;
-	}
-
-	return drv_data->transfer_handler(drv_data);
-}
-
-static inline u32 spi_speed_hz(struct driver_data *drv_data, u32 data_rate)
-{
-	return clk_get_rate(drv_data->clk) / (4 << ((data_rate) >> 13));
-}
-
-static u32 spi_data_rate(struct driver_data *drv_data, u32 speed_hz)
-{
-	u32 div;
-	u32 quantized_hz = clk_get_rate(drv_data->clk) >> 2;
-
-	for (div = SPI_PERCLK2_DIV_MIN;
-		div <= SPI_PERCLK2_DIV_MAX;
-		div++, quantized_hz >>= 1) {
-			if (quantized_hz <= speed_hz)
-				/* Max available speed LEQ required speed */
-				return div << 13;
-	}
-	return SPI_CONTROL_DATARATE_BAD;
-}
-
-static void pump_transfers(unsigned long data)
-{
-	struct driver_data *drv_data = (struct driver_data *)data;
-	struct spi_message *message;
-	struct spi_transfer *transfer, *previous;
-	struct chip_data *chip;
-	void __iomem *regs;
-	u32 tmp, control;
-
-	dev_dbg(&drv_data->pdev->dev, "pump_transfer\n");
-
-	message = drv_data->cur_msg;
-
-	/* Handle for abort */
-	if (message->state == ERROR_STATE) {
-		message->status = -EIO;
-		giveback(message, drv_data);
-		return;
-	}
-
-	/* Handle end of message */
-	if (message->state == DONE_STATE) {
-		message->status = 0;
-		giveback(message, drv_data);
-		return;
-	}
-
-	chip = drv_data->cur_chip;
-
-	/* Delay if requested at end of transfer*/
-	transfer = drv_data->cur_transfer;
-	if (message->state == RUNNING_STATE) {
-		previous = list_entry(transfer->transfer_list.prev,
-					struct spi_transfer,
-					transfer_list);
-		if (previous->delay_usecs)
-			udelay(previous->delay_usecs);
-	} else {
-		/* START_STATE */
-		message->state = RUNNING_STATE;
-		drv_data->cs_control = chip->cs_control;
-	}
-
-	transfer = drv_data->cur_transfer;
-	drv_data->tx = (void *)transfer->tx_buf;
-	drv_data->tx_end = drv_data->tx + transfer->len;
-	drv_data->rx = transfer->rx_buf;
-	drv_data->rx_end = drv_data->rx + transfer->len;
-	drv_data->rx_dma = transfer->rx_dma;
-	drv_data->tx_dma = transfer->tx_dma;
-	drv_data->len = transfer->len;
-	drv_data->cs_change = transfer->cs_change;
-	drv_data->rd_only = (drv_data->tx == NULL);
-
-	regs = drv_data->regs;
-	control = readl(regs + SPI_CONTROL);
-
-	/* Bits per word setup */
-	tmp = transfer->bits_per_word;
-	if (tmp == 0) {
-		/* Use device setup */
-		tmp = chip->bits_per_word;
-		drv_data->n_bytes = chip->n_bytes;
-	} else
-		/* Use per-transfer setup */
-		drv_data->n_bytes = (tmp <= 8) ? 1 : 2;
-	u32_EDIT(control, SPI_CONTROL_BITCOUNT_MASK, tmp - 1);
-
-	/* Speed setup (surely valid because already checked) */
-	tmp = transfer->speed_hz;
-	if (tmp == 0)
-		tmp = chip->max_speed_hz;
-	tmp = spi_data_rate(drv_data, tmp);
-	u32_EDIT(control, SPI_CONTROL_DATARATE, tmp);
-
-	writel(control, regs + SPI_CONTROL);
-
-	/* Assert device chip-select */
-	drv_data->cs_control(SPI_CS_ASSERT);
-
-	/* DMA cannot read/write SPI FIFOs other than 16 bits at a time; hence
-	   if bits_per_word is less or equal 8 PIO transfers are performed.
-	   Moreover DMA is convinient for transfer length bigger than FIFOs
-	   byte size. */
-	if ((drv_data->n_bytes == 2) &&
-		(drv_data->len > SPI_FIFO_DEPTH*SPI_FIFO_BYTE_WIDTH) &&
-		(map_dma_buffers(drv_data) == 0)) {
-		dev_dbg(&drv_data->pdev->dev,
-			"pump dma transfer\n"
-			"    tx      = %p\n"
-			"    tx_dma  = %08X\n"
-			"    rx      = %p\n"
-			"    rx_dma  = %08X\n"
-			"    len     = %d\n",
-			drv_data->tx,
-			(unsigned int)drv_data->tx_dma,
-			drv_data->rx,
-			(unsigned int)drv_data->rx_dma,
-			drv_data->len);
-
-		/* Ensure we have the correct interrupt handler */
-		drv_data->transfer_handler = dma_transfer;
-
-		/* Trigger transfer */
-		writel(readl(regs + SPI_CONTROL) | SPI_CONTROL_XCH,
-			regs + SPI_CONTROL);
-
-		/* Setup tx DMA */
-		if (drv_data->tx)
-			/* Linear source address */
-			CCR(drv_data->tx_channel) =
-				CCR_DMOD_FIFO |
-				CCR_SMOD_LINEAR |
-				CCR_SSIZ_32 | CCR_DSIZ_16 |
-				CCR_REN;
-		else
-			/* Read only transfer -> fixed source address for
-			   dummy write to achive read */
-			CCR(drv_data->tx_channel) =
-				CCR_DMOD_FIFO |
-				CCR_SMOD_FIFO |
-				CCR_SSIZ_32 | CCR_DSIZ_16 |
-				CCR_REN;
-
-		imx_dma_setup_single(
-			drv_data->tx_channel,
-			drv_data->tx_dma,
-			drv_data->len,
-			drv_data->rd_data_phys + 4,
-			DMA_MODE_WRITE);
-
-		if (drv_data->rx) {
-			/* Setup rx DMA for linear destination address */
-			CCR(drv_data->rx_channel) =
-				CCR_DMOD_LINEAR |
-				CCR_SMOD_FIFO |
-				CCR_DSIZ_32 | CCR_SSIZ_16 |
-				CCR_REN;
-			imx_dma_setup_single(
-				drv_data->rx_channel,
-				drv_data->rx_dma,
-				drv_data->len,
-				drv_data->rd_data_phys,
-				DMA_MODE_READ);
-			imx_dma_enable(drv_data->rx_channel);
-
-			/* Enable SPI interrupt */
-			writel(SPI_INTEN_RO, regs + SPI_INT_STATUS);
-
-			/* Set SPI to request DMA service on both
-			   Rx and Tx half fifo watermark */
-			writel(SPI_DMA_RHDEN | SPI_DMA_THDEN, regs + SPI_DMA);
-		} else
-			/* Write only access -> set SPI to request DMA
-			   service on Tx half fifo watermark */
-			writel(SPI_DMA_THDEN, regs + SPI_DMA);
-
-		imx_dma_enable(drv_data->tx_channel);
-	} else {
-		dev_dbg(&drv_data->pdev->dev,
-			"pump pio transfer\n"
-			"    tx      = %p\n"
-			"    rx      = %p\n"
-			"    len     = %d\n",
-			drv_data->tx,
-			drv_data->rx,
-			drv_data->len);
-
-		/* Ensure we have the correct interrupt handler	*/
-		if (drv_data->rx)
-			drv_data->transfer_handler = interrupt_transfer;
-		else
-			drv_data->transfer_handler = interrupt_wronly_transfer;
-
-		/* Enable SPI interrupt */
-		if (drv_data->rx)
-			writel(SPI_INTEN_TH | SPI_INTEN_RO,
-				regs + SPI_INT_STATUS);
-		else
-			writel(SPI_INTEN_TH, regs + SPI_INT_STATUS);
-	}
-}
-
-static void pump_messages(struct work_struct *work)
-{
-	struct driver_data *drv_data =
-				container_of(work, struct driver_data, work);
-	unsigned long flags;
-
-	/* Lock queue and check for queue work */
-	spin_lock_irqsave(&drv_data->lock, flags);
-	if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
-		drv_data->busy = 0;
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return;
-	}
-
-	/* Make sure we are not already running a message */
-	if (drv_data->cur_msg) {
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return;
-	}
-
-	/* Extract head of queue */
-	drv_data->cur_msg = list_entry(drv_data->queue.next,
-					struct spi_message, queue);
-	list_del_init(&drv_data->cur_msg->queue);
-	drv_data->busy = 1;
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-
-	/* Initial message state */
-	drv_data->cur_msg->state = START_STATE;
-	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
-						struct spi_transfer,
-						transfer_list);
-
-	/* Setup the SPI using the per chip configuration */
-	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
-	restore_state(drv_data);
-
-	/* Mark as busy and launch transfers */
-	tasklet_schedule(&drv_data->pump_transfers);
-}
-
-static int transfer(struct spi_device *spi, struct spi_message *msg)
-{
-	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
-	u32 min_speed_hz, max_speed_hz, tmp;
-	struct spi_transfer *trans;
-	unsigned long flags;
-
-	msg->actual_length = 0;
-
-	/* Per transfer set