Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into common/serial-rework

Conflicts:
	arch/sh/kernel/cpu/sh2/setup-sh7619.c
	arch/sh/kernel/cpu/sh2a/setup-mxg.c
	arch/sh/kernel/cpu/sh2a/setup-sh7201.c
	arch/sh/kernel/cpu/sh2a/setup-sh7203.c
	arch/sh/kernel/cpu/sh2a/setup-sh7206.c
	arch/sh/kernel/cpu/sh3/setup-sh7705.c
	arch/sh/kernel/cpu/sh3/setup-sh770x.c
	arch/sh/kernel/cpu/sh3/setup-sh7710.c
	arch/sh/kernel/cpu/sh3/setup-sh7720.c
	arch/sh/kernel/cpu/sh4/setup-sh4-202.c
	arch/sh/kernel/cpu/sh4/setup-sh7750.c
	arch/sh/kernel/cpu/sh4/setup-sh7760.c
	arch/sh/kernel/cpu/sh4a/setup-sh7343.c
	arch/sh/kernel/cpu/sh4a/setup-sh7366.c
	arch/sh/kernel/cpu/sh4a/setup-sh7722.c
	arch/sh/kernel/cpu/sh4a/setup-sh7723.c
	arch/sh/kernel/cpu/sh4a/setup-sh7724.c
	arch/sh/kernel/cpu/sh4a/setup-sh7763.c
	arch/sh/kernel/cpu/sh4a/setup-sh7770.c
	arch/sh/kernel/cpu/sh4a/setup-sh7780.c
	arch/sh/kernel/cpu/sh4a/setup-sh7785.c
	arch/sh/kernel/cpu/sh4a/setup-sh7786.c
	arch/sh/kernel/cpu/sh4a/setup-shx3.c
	arch/sh/kernel/cpu/sh5/setup-sh5.c
	drivers/serial/sh-sci.c
	drivers/serial/sh-sci.h
	include/linux/serial_sci.h

98 files changed, 18737 insertions, 3194 deletions

diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index cb6d85d7ff43..d89aa38c5cf0 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -58,7 +58,7 @@ static const char serial21285_name[] = "Footbridge UART";
 static void serial21285_stop_tx(struct uart_port *port)
 {
 	if (tx_enabled(port)) {
-		disable_irq(IRQ_CONTX);
+		disable_irq_nosync(IRQ_CONTX);
 		tx_enabled(port) = 0;
 	}
 }
@@ -74,7 +74,7 @@ static void serial21285_start_tx(struct uart_port *port)
 static void serial21285_stop_rx(struct uart_port *port)
 {
 	if (rx_enabled(port)) {
-		disable_irq(IRQ_CONRX);
+		disable_irq_nosync(IRQ_CONRX);
 		rx_enabled(port) = 0;
 	}
 }
@@ -86,7 +86,7 @@ static void serial21285_enable_ms(struct uart_port *port)
 static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int status, ch, flag, rxs, max_count = 256;
 
 	status = *CSR_UARTFLG;
@@ -124,7 +124,7 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
 static irqreturn_t serial21285_tx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	int count = 256;
 
 	if (port->x_char) {
@@ -216,7 +216,7 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
 			struct ktermios *old)
 {
 	unsigned long flags;
-	unsigned int baud, quot, h_lcr;
+	unsigned int baud, quot, h_lcr, b;
 
 	/*
 	 * We don't support modem control lines.
@@ -234,12 +234,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
 	 */
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
 	quot = uart_get_divisor(port, baud);
-
-	if (port->info && port->info->port.tty) {
-		struct tty_struct *tty = port->info->port.tty;
-		unsigned int b = port->uartclk / (16 * quot);
-		tty_encode_baud_rate(tty, b, b);
-	}
+	b = port->uartclk / (16 * quot);
+	tty_termios_encode_baud_rate(termios, b, b);
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index d935b2d04f93..be0ebce36e54 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -35,6 +35,7 @@
 #include <linux/pm.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
+#include <linux/gfp.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -77,10 +78,6 @@ struct m68k_serial *m68k_consinfo = 0;
 
 #define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */
 
-#ifdef CONFIG_CONSOLE
-extern wait_queue_head_t keypress_wait; 
-#endif
-
 struct tty_driver *serial_driver;
 
 /* number of characters left in xmit buffer before we ask for more */
@@ -101,19 +98,13 @@ static void change_speed(struct m68k_serial *info);
  *	Setup for console. Argument comes from the boot command line.
  */
 
-#if defined(CONFIG_M68EZ328ADS) || defined(CONFIG_ALMA_ANS) || defined(CONFIG_DRAGONIXVZ)
-#define	CONSOLE_BAUD_RATE	115200
-#define	DEFAULT_CBAUD		B115200
-#else
-	/* (es) */
-	/* note: this is messy, but it works, again, perhaps defined somewhere else?*/
-	#ifdef CONFIG_M68VZ328
-	#define CONSOLE_BAUD_RATE	19200
-	#define DEFAULT_CBAUD		B19200
-	#endif
-	/* (/es) */
+/* note: this is messy, but it works, again, perhaps defined somewhere else?*/
+#ifdef CONFIG_M68VZ328
+#define CONSOLE_BAUD_RATE	19200
+#define DEFAULT_CBAUD		B19200
 #endif
 
+
 #ifndef CONSOLE_BAUD_RATE
 #define	CONSOLE_BAUD_RATE	9600
 #define	DEFAULT_CBAUD		B9600
@@ -153,8 +144,6 @@ static int baud_table[] = {
 	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
 	9600, 19200, 38400, 57600, 115200, 0 };
 
-#define BAUD_TABLE_SIZE (sizeof(baud_table)/sizeof(baud_table[0]))
-
 /* Sets or clears DTR/RTS on the requested line */
 static inline void m68k_rtsdtr(struct m68k_serial *ss, int set)
 {
@@ -301,10 +290,6 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx)
 				return;
 #endif /* CONFIG_MAGIC_SYSRQ */
 			}
-			/* It is a 'keyboard interrupt' ;-) */
-#ifdef CONFIG_CONSOLE
-			wake_up(&keypress_wait);
-#endif			
 		}
 
 		if(!tty)
@@ -884,7 +869,9 @@ static int get_serial_info(struct m68k_serial * info,
 	tmp.close_delay = info->close_delay;
 	tmp.closing_wait = info->closing_wait;
 	tmp.custom_divisor = info->custom_divisor;
-	copy_to_user(retinfo,&tmp,sizeof(*retinfo));
+	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+		return -EFAULT;
+
 	return 0;
 }
 
@@ -897,7 +884,8 @@ static int set_serial_info(struct m68k_serial * info,
 
 	if (!new_info)
 		return -EFAULT;
-	copy_from_user(&new_serial,new_info,sizeof(new_serial));
+	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+		return -EFAULT;
 	old_info = *info;
 
 	if (!capable(CAP_SYS_ADMIN)) {
@@ -958,8 +946,7 @@ static int get_lsr_info(struct m68k_serial * info, unsigned int *value)
 	status = 0;
 #endif
 	local_irq_restore(flags);
-	put_user(status,value);
-	return 0;
+	return put_user(status, value);
 }
 
 /*
@@ -1014,27 +1001,18 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 			send_break(info, arg ? arg*(100) : 250);
 			return 0;
 		case TIOCGSERIAL:
-			if (access_ok(VERIFY_WRITE, (void *) arg,
-						sizeof(struct serial_struct)))
-				return get_serial_info(info,
-					       (struct serial_struct *) arg);
-			return -EFAULT;
+			return get_serial_info(info,
+				       (struct serial_struct *) arg);
 		case TIOCSSERIAL:
 			return set_serial_info(info,
 					       (struct serial_struct *) arg);
 		case TIOCSERGETLSR: /* Get line status register */
-			if (access_ok(VERIFY_WRITE, (void *) arg,
-						sizeof(unsigned int)))
-				return get_lsr_info(info, (unsigned int *) arg);
-			return -EFAULT;
+			return get_lsr_info(info, (unsigned int *) arg);
 		case TIOCSERGSTRUCT:
-			if (!access_ok(VERIFY_WRITE, (void *) arg,
-						sizeof(struct m68k_serial)))
+			if (copy_to_user((struct m68k_serial *) arg,
+				    info, sizeof(struct m68k_serial)))
 				return -EFAULT;
-			copy_to_user((struct m68k_serial *) arg,
-				    info, sizeof(struct m68k_serial));
 			return 0;
-			
 		default:
 			return -ENOIOCTLCMD;
 		}
@@ -1244,7 +1222,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 			retval = -ERESTARTSYS;
 			break;
 		}
+		tty_unlock();
 		schedule();
+		tty_lock();
 	}
 	current->state = TASK_RUNNING;
 	remove_wait_queue(&info->open_wait, &wait);
@@ -1406,10 +1386,10 @@ static void m68328_set_baud(void)
 	USTCNT = ustcnt & ~USTCNT_TXEN;
 
 again:
-	for (i = 0; i < sizeof(baud_table) / sizeof(baud_table[0]); i++)
+	for (i = 0; i < ARRAY_SIZE(baud_table); i++)
 		if (baud_table[i] == m68328_console_baud)
 			break;
-	if (i >= sizeof(baud_table) / sizeof(baud_table[0])) {
+	if (i >= ARRAY_SIZE(baud_table)) {
 		m68328_console_baud = 9600;
 		goto again;
 	}
@@ -1435,10 +1415,10 @@ int m68328_console_setup(struct console *cp, char *arg)
 	if (arg)
 		n = simple_strtoul(arg,NULL,0);
 
-	for (i = 0; i < BAUD_TABLE_SIZE; i++)
+	for (i = 0; i < ARRAY_SIZE(baud_table); i++)
 		if (baud_table[i] == n)
 			break;
-	if (i < BAUD_TABLE_SIZE) {
+	if (i < ARRAY_SIZE(baud_table)) {
 		m68328_console_baud = n;
 		m68328_console_cbaud = 0;
 		if (i > 15) {
diff --git a/drivers/serial/68328serial.h b/drivers/serial/68328serial.h
index 58aa2154655b..664ceb0a158c 100644
--- a/drivers/serial/68328serial.h
+++ b/drivers/serial/68328serial.h
@@ -181,13 +181,8 @@ struct m68k_serial {
 /* 
  * Define the number of ports supported and their irqs.
  */
-#ifndef CONFIG_68328_SERIAL_UART2
 #define NR_PORTS 1
 #define UART_IRQ_DEFNS {UART_IRQ_NUM}
-#else
-#define NR_PORTS 2
-#define UART_IRQ_DEFNS {UART1_IRQ_NUM, UART2_IRQ_NUM}
-#endif
 
 #endif /* __KERNEL__ */
 #endif /* !(_MC683XX_SERIAL_H) */
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 24661cd5e4fb..88b13356ec10 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -1381,6 +1381,30 @@ static void send_break(ser_info_t *info, unsigned int duration)
 }
 
 
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int rs_360_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	ser_info_t *info = (ser_info_t *)tty->driver_data;
+	struct async_icount cnow;
+
+	local_irq_disable();
+	cnow = info->state->icount;
+	local_irq_enable();
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+
+	return 0;
+}
+
 static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
 		    unsigned int cmd, unsigned long arg)
 {
@@ -1394,7 +1418,7 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
 	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
 		return -ENODEV;
 
-	if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	if (cmd != TIOCMIWAIT) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -1477,31 +1501,6 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
 			return 0;
 #endif
 
-		/* 
-		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-		 * Return: write counters to the user passed counter struct
-		 * NB: both 1->0 and 0->1 transitions are counted except for
-		 *     RI where only 0->1 is counted.
-		 */
-		case TIOCGICOUNT:
-			local_irq_disable();
-			cnow = info->state->icount;
-			local_irq_enable();
-			p_cuser = (struct serial_icounter_struct *) arg;
-/* 			error = put_user(cnow.cts, &p_cuser->cts); */
-/* 			if (error) return error; */
-/* 			error = put_user(cnow.dsr, &p_cuser->dsr); */
-/* 			if (error) return error; */
-/* 			error = put_user(cnow.rng, &p_cuser->rng); */
-/* 			if (error) return error; */
-/* 			error = put_user(cnow.dcd, &p_cuser->dcd); */
-/* 			if (error) return error; */