Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "First round of SCSI updates for the 4.6+ merge window.

  This batch includes the usual quota of driver updates (bnx2fc, mp3sas,
  hpsa, ncr5380, lpfc, hisi_sas, snic, aacraid, megaraid_sas).  There's
  also a multiqueue update for scsi_debug, assorted bug fixes and a few
  other minor updates (refactor of scsi_sg_pools into generic code, alua
  and VPD updates, and struct timeval conversions)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits)
  mpt3sas: Used "synchronize_irq()"API to synchronize timed-out IO & TMs
  mpt3sas: Set maximum transfer length per IO to 4MB for VDs
  mpt3sas: Updating mpt3sas driver version to 13.100.00.00
  mpt3sas: Fix initial Reference tag field for 4K PI drives.
  mpt3sas: Handle active cable exception event
  mpt3sas: Update MPI header to 2.00.42
  Revert "lpfc: Delete unnecessary checks before the function call mempool_destroy"
  eata_pio: missing break statement
  hpsa: Fix type ZBC conditional checks
  scsi_lib: Decode T10 vendor IDs
  scsi_dh_alua: do not fail for unknown VPD identification
  scsi_debug: use locally assigned naa
  scsi_debug: uuid for lu name
  scsi_debug: vpd and mode page work
  scsi_debug: add multiple queue support
  bfa: fix bfa_fcb_itnim_alloc() error handling
  megaraid_sas: Downgrade two success messages to info
  cxlflash: Fix to resolve dead-lock during EEH recovery
  scsi_debug: rework resp_report_luns
  scsi_debug: use pdt constants
  ...

99 files changed, 4585 insertions, 6431 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index e80768f8e579..98e5d51a3346 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -17,6 +17,7 @@ config SCSI
 	tristate "SCSI device support"
 	depends on BLOCK
 	select SCSI_DMA if HAS_DMA
+	select SG_POOL
 	---help---
 	  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
 	  any other SCSI device under Linux, say Y and make sure that you know
@@ -202,12 +203,12 @@ config SCSI_ENCLOSURE
 	  certain enclosure conditions to be reported and is not required.
 
 config SCSI_CONSTANTS
-	bool "Verbose SCSI error reporting (kernel size +=75K)"
+	bool "Verbose SCSI error reporting (kernel size += 36K)"
 	depends on SCSI
 	help
 	  The error messages regarding your SCSI hardware will be easier to
 	  understand if you say Y here; it will enlarge your kernel by about
-	  75 KB. If in doubt, say Y.
+	  36 KB. If in doubt, say Y.
 
 config SCSI_LOGGING
 	bool "SCSI logging facility"
@@ -813,17 +814,6 @@ config SCSI_GENERIC_NCR5380_MMIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called g_NCR5380_mmio.
 
-config SCSI_GENERIC_NCR53C400
-	bool "Enable NCR53c400 extensions"
-	depends on SCSI_GENERIC_NCR5380
-	help
-	  This enables certain optimizations for the NCR53c400 SCSI cards.
-	  You might as well try it out.  Note that this driver will only probe
-	  for the Trantor T130B in its default configuration; you might have
-	  to pass a command line option to the kernel at boot time if it does
-	  not detect your card.  See the file
-	  <file:Documentation/scsi/g_NCR5380.txt> for details.
-
 config SCSI_IPS
 	tristate "IBM ServeRAID support"
 	depends on PCI && SCSI
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 3eff2a69fe08..43908bbb3b23 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -29,29 +29,9 @@
  * Ronald van Cuijlenborg, Alan Cox and others.
  */
 
-/*
- * Further development / testing that should be done :
- * 1.  Cleanup the NCR5380_transfer_dma function and DMA operation complete
- * code so that everything does the same thing that's done at the
- * end of a pseudo-DMA read operation.
- *
- * 2.  Fix REAL_DMA (interrupt driven, polled works fine) -
- * basically, transfer size needs to be reduced by one
- * and the last byte read as is done with PSEUDO_DMA.
- *
- * 4.  Test SCSI-II tagged queueing (I have no devices which support
- * tagged queueing)
- */
+/* Ported to Atari by Roman Hodek and others. */
 
-#ifndef notyet
-#undef REAL_DMA
-#endif
-
-#ifdef BOARD_REQUIRES_NO_DELAY
-#define io_recovery_delay(x)
-#else
-#define io_recovery_delay(x)	udelay(x)
-#endif
+/* Adapted for the Sun 3 by Sam Creasey. */
 
 /*
  * Design
@@ -126,17 +106,10 @@
  * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential
  * transceivers.
  *
- * DONT_USE_INTR - if defined, never use interrupts, even if we probe or
- * override-configure an IRQ.
- *
  * PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases.
  *
  * REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
  *
- * REAL_DMA_POLL - if defined, REAL DMA is used but the driver doesn't
- * rely on phase mismatch and EOP interrupts to determine end
- * of phase.
- *
  * These macros MUST be defined :
  *
  * NCR5380_read(register)  - read from the specified register
@@ -147,29 +120,29 @@
  * specific implementation of the NCR5380
  *
  * Either real DMA *or* pseudo DMA may be implemented
- * REAL functions :
- * NCR5380_REAL_DMA should be defined if real DMA is to be used.
- * Note that the DMA setup functions should return the number of bytes
- * that they were able to program the controller for.
- *
- * Also note that generic i386/PC versions of these macros are
- * available as NCR5380_i386_dma_write_setup,
- * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
  *
  * NCR5380_dma_write_setup(instance, src, count) - initialize
  * NCR5380_dma_read_setup(instance, dst, count) - initialize
  * NCR5380_dma_residual(instance); - residual count
  *
- * PSEUDO functions :
- * NCR5380_pwrite(instance, src, count)
- * NCR5380_pread(instance, dst, count);
- *
  * The generic driver is initialized by calling NCR5380_init(instance),
  * after setting the appropriate host specific fields and ID.  If the
  * driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
  * possible) function may be used.
  */
 
+#ifndef NCR5380_io_delay
+#define NCR5380_io_delay(x)
+#endif
+
+#ifndef NCR5380_acquire_dma_irq
+#define NCR5380_acquire_dma_irq(x)	(1)
+#endif
+
+#ifndef NCR5380_release_dma_irq
+#define NCR5380_release_dma_irq(x)
+#endif
+
 static int do_abort(struct Scsi_Host *);
 static void do_reset(struct Scsi_Host *);
 
@@ -280,12 +253,20 @@ static struct {
 	{0, NULL}
 },
 basrs[] = {
+	{BASR_END_DMA_TRANSFER, "END OF DMA"},
+	{BASR_DRQ, "DRQ"},
+	{BASR_PARITY_ERROR, "PARITY ERROR"},
+	{BASR_IRQ, "IRQ"},
+	{BASR_PHASE_MATCH, "PHASE MATCH"},
+	{BASR_BUSY_ERROR, "BUSY ERROR"},
 	{BASR_ATN, "ATN"},
 	{BASR_ACK, "ACK"},
 	{0, NULL}
 },
 icrs[] = {
 	{ICR_ASSERT_RST, "ASSERT RST"},
+	{ICR_ARBITRATION_PROGRESS, "ARB. IN PROGRESS"},
+	{ICR_ARBITRATION_LOST, "LOST ARB."},
 	{ICR_ASSERT_ACK, "ASSERT ACK"},
 	{ICR_ASSERT_BSY, "ASSERT BSY"},
 	{ICR_ASSERT_SEL, "ASSERT SEL"},
@@ -294,14 +275,14 @@ icrs[] = {
 	{0, NULL}
 },
 mrs[] = {
-	{MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"},
-	{MR_TARGET, "MODE TARGET"},
-	{MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
-	{MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
-	{MR_ENABLE_EOP_INTR, "MODE EOP INTR"},
-	{MR_MONITOR_BSY, "MODE MONITOR BSY"},
-	{MR_DMA_MODE, "MODE DMA"},
-	{MR_ARBITRATE, "MODE ARBITRATION"},
+	{MR_BLOCK_DMA_MODE, "BLOCK DMA MODE"},
+	{MR_TARGET, "TARGET"},
+	{MR_ENABLE_PAR_CHECK, "PARITY CHECK"},
+	{MR_ENABLE_PAR_INTR, "PARITY INTR"},
+	{MR_ENABLE_EOP_INTR, "EOP INTR"},
+	{MR_MONITOR_BSY, "MONITOR BSY"},
+	{MR_DMA_MODE, "DMA MODE"},
+	{MR_ARBITRATE, "ARBITRATE"},
 	{0, NULL}
 };
 
@@ -322,23 +303,23 @@ static void NCR5380_print(struct Scsi_Host *instance)
 	icr = NCR5380_read(INITIATOR_COMMAND_REG);
 	basr = NCR5380_read(BUS_AND_STATUS_REG);
 
-	printk("STATUS_REG: %02x ", status);
+	printk(KERN_DEBUG "SR =   0x%02x : ", status);
 	for (i = 0; signals[i].mask; ++i)
 		if (status & signals[i].mask)
-			printk(",%s", signals[i].name);
-	printk("\nBASR: %02x ", basr);
+			printk(KERN_CONT "%s, ", signals[i].name);
+	printk(KERN_CONT "\nBASR = 0x%02x : ", basr);
 	for (i = 0; basrs[i].mask; ++i)
 		if (basr & basrs[i].mask)
-			printk(",%s", basrs[i].name);
-	printk("\nICR: %02x ", icr);
+			printk(KERN_CONT "%s, ", basrs[i].name);
+	printk(KERN_CONT "\nICR =  0x%02x : ", icr);
 	for (i = 0; icrs[i].mask; ++i)
 		if (icr & icrs[i].mask)
-			printk(",%s", icrs[i].name);
-	printk("\nMODE: %02x ", mr);
+			printk(KERN_CONT "%s, ", icrs[i].name);
+	printk(KERN_CONT "\nMR =   0x%02x : ", mr);
 	for (i = 0; mrs[i].mask; ++i)
 		if (mr & mrs[i].mask)
-			printk(",%s", mrs[i].name);
-	printk("\n");
+			printk(KERN_CONT "%s, ", mrs[i].name);
+	printk(KERN_CONT "\n");
 }
 
 static struct {
@@ -477,52 +458,18 @@ static void prepare_info(struct Scsi_Host *instance)
 	         instance->base, instance->irq,
 	         instance->can_queue, instance->cmd_per_lun,
 	         instance->sg_tablesize, instance->this_id,
-	         hostdata->flags & FLAG_NO_DMA_FIXUP  ? "NO_DMA_FIXUP "  : "",
+	         hostdata->flags & FLAG_DMA_FIXUP     ? "DMA_FIXUP "     : "",
 	         hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
 	         hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY "  : "",
-#ifdef AUTOPROBE_IRQ
-	         "AUTOPROBE_IRQ "
-#endif
 #ifdef DIFFERENTIAL
 	         "DIFFERENTIAL "
 #endif
-#ifdef REAL_DMA
-	         "REAL_DMA "
-#endif
-#ifdef REAL_DMA_POLL
-	         "REAL_DMA_POLL "
-#endif
 #ifdef PARITY
 	         "PARITY "
 #endif
-#ifdef PSEUDO_DMA
-	         "PSEUDO_DMA "
-#endif
 	         "");
 }
 
-#ifdef PSEUDO_DMA
-static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
-	char *buffer, int length)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
-	hostdata->spin_max_r = 0;
-	hostdata->spin_max_w = 0;
-	return 0;
-}
-
-static int __maybe_unused NCR5380_show_info(struct seq_file *m,
-                                            struct Scsi_Host *instance)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
-	seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
-	        hostdata->spin_max_w, hostdata->spin_max_r);
-	return 0;
-}
-#endif
-
 /**
  * NCR5380_init - initialise an NCR5380
  * @instance: adapter to configure
@@ -543,6 +490,8 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags)
 	int i;
 	unsigned long deadline;
 
+	instance->max_lun = 7;
+
 	hostdata->host = instance;
 	hostdata->id_mask = 1 << instance->this_id;
 	hostdata->id_higher_mask = 0;
@@ -551,9 +500,8 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags)
 			hostdata->id_higher_mask |= i;
 	for (i = 0; i < 8; ++i)
 		hostdata->busy[i] = 0;
-#ifdef REAL_DMA
-	hostdata->dmalen = 0;
-#endif
+	hostdata->dma_len = 0;
+
 	spin_lock_init(&hostdata->lock);
 	hostdata->connected = NULL;
 	hostdata->sensing = NULL;
@@ -719,6 +667,9 @@ static int NCR5380_queue_command(struct Scsi_Host *instance,
 
 	cmd->result = 0;
 
+	if (!NCR5380_acquire_dma_irq(instance))
+		return SCSI_MLQUEUE_HOST_BUSY;
+
 	spin_lock_irqsave(&hostdata->lock, flags);
 
 	/*
@@ -743,6 +694,19 @@ static int NCR5380_queue_command(struct Scsi_Host *instance,