Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits)
  [SCSI] qla2xxx: Update version number to 8.02.00-k5.
  [SCSI] qla2xxx: Correct display of ISP serial-number.
  [SCSI] qla2xxx: Correct residual-count handling discrepancies during UNDERRUN handling.
  [SCSI] qla2xxx: Make driver (mostly) legacy I/O port free.
  [SCSI] qla2xxx: Fix issue where final flash-segment updates were falling into the slow-path write handler.
  [SCSI] qla2xxx: Handle unaligned sector writes during NVRAM/VPD updates.
  [SCSI] qla2xxx: Defer explicit interrupt-polling processing to init-time scenarios.
  [SCSI] qla2xxx: Resync with latest HBA SSID specification -- 2.2u.
  [SCSI] sym53c8xx: Remove sym_xpt_async_sent_bdr
  [SCSI] sym53c8xx: Remove pci_dev pointer from sym_shcb
  [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE
  [SCSI] sym53c8xx: Get rid of IRQ_FMT and IRQ_PRM
  [SCSI] sym53c8xx: Use scmd_printk where appropriate
  [SCSI] sym53c8xx: Simplify DAC DMA handling
  [SCSI] sym53c8xx: Remove tag_ctrl module parameter
  [SCSI] sym53c8xx: Remove io_ws, mmio_ws and ram_ws elements
  [SCSI] sym53c8xx: Remove ->device_id
  [SCSI] sym53c8xx: Use pdev->revision
  [SCSI] sym53c8xx: PCI Error Recovery support
  [SCSI] sym53c8xx: Stop overriding scsi_done
  ...

43 files changed, 662 insertions, 1233 deletions

diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 6141389dcdb2..2e6129f13d38 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -115,7 +115,6 @@ obj-$(CONFIG_SCSI_QLOGICPTI)	+= qlogicpti.o
 obj-$(CONFIG_BLK_DEV_IDESCSI)	+= ide-scsi.o
 obj-$(CONFIG_SCSI_MESH)		+= mesh.o
 obj-$(CONFIG_SCSI_MAC53C94)	+= mac53c94.o
-obj-$(CONFIG_SCSI_PLUTO)	+= pluto.o
 obj-$(CONFIG_SCSI_DECNCR)	+= NCR53C9x.o	dec_esp.o
 obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
 obj-$(CONFIG_SCSI_3W_9XXX)	+= 3w-9xxx.o
@@ -123,7 +122,6 @@ obj-$(CONFIG_SCSI_PPA)		+= ppa.o
 obj-$(CONFIG_SCSI_IMM)		+= imm.o
 obj-$(CONFIG_JAZZ_ESP)		+= esp_scsi.o	jazz_esp.o
 obj-$(CONFIG_SUN3X_ESP)		+= NCR53C9x.o	sun3x_esp.o
-obj-$(CONFIG_SCSI_FCAL)		+= fcal.o
 obj-$(CONFIG_SCSI_LASI700)	+= 53c700.o lasi700.o
 obj-$(CONFIG_SCSI_SNI_53C710)	+= 53c700.o sni_53c710.o
 obj-$(CONFIG_SCSI_NSP32)	+= nsp32.o
diff --git a/drivers/scsi/aic7xxx/aic7770.c b/drivers/scsi/aic7xxx/aic7770.c
index c4d17231c828..6d86a9be538f 100644
--- a/drivers/scsi/aic7xxx/aic7770.c
+++ b/drivers/scsi/aic7xxx/aic7770.c
@@ -60,8 +60,6 @@
 #define	ID_OLV_274xD	0x04907783 /* Olivetti OEM (Differential) */
 
 static int aic7770_chip_init(struct ahc_softc *ahc);
-static int aic7770_suspend(struct ahc_softc *ahc);
-static int aic7770_resume(struct ahc_softc *ahc);
 static int aha2840_load_seeprom(struct ahc_softc *ahc);
 static ahc_device_setup_t ahc_aic7770_VL_setup;
 static ahc_device_setup_t ahc_aic7770_EISA_setup;
@@ -155,8 +153,6 @@ aic7770_config(struct ahc_softc *ahc, struct aic7770_identity *entry, u_int io)
 		return (error);
 
 	ahc->bus_chip_init = aic7770_chip_init;
-	ahc->bus_suspend = aic7770_suspend;
-	ahc->bus_resume = aic7770_resume;
 
 	error = ahc_reset(ahc, /*reinit*/FALSE);
 	if (error != 0)
@@ -272,18 +268,6 @@ aic7770_chip_init(struct ahc_softc *ahc)
 	return (ahc_chip_init(ahc));
 }
 
-static int
-aic7770_suspend(struct ahc_softc *ahc)
-{
-	return (ahc_suspend(ahc));
-}
-
-static int
-aic7770_resume(struct ahc_softc *ahc)
-{
-	return (ahc_resume(ahc));
-}
-
 /*
  * Read the 284x SEEPROM.
  */
diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h
index 27adbb294ac1..ce638aa6005a 100644
--- a/drivers/scsi/aic7xxx/aic79xx.h
+++ b/drivers/scsi/aic7xxx/aic79xx.h
@@ -1003,8 +1003,15 @@ struct ahd_suspend_channel_state {
 	uint8_t	seqctl;
 };
 
+struct ahd_suspend_pci_state {
+	uint32_t  devconfig;
+	uint8_t   command;
+	uint8_t   csize_lattime;
+};
+
 struct ahd_suspend_state {
 	struct	ahd_suspend_channel_state channel[2];
+	struct  ahd_suspend_pci_state pci_state;
 	uint8_t	optionmode;
 	uint8_t	dscommand0;
 	uint8_t	dspcistatus;
@@ -1333,6 +1340,8 @@ struct	ahd_pci_identity *ahd_find_pci_device(ahd_dev_softc_t);
 int			  ahd_pci_config(struct ahd_softc *,
 					 struct ahd_pci_identity *);
 int	ahd_pci_test_register_access(struct ahd_softc *);
+void	ahd_pci_suspend(struct ahd_softc *);
+void	ahd_pci_resume(struct ahd_softc *);
 
 /************************** SCB and SCB queue management **********************/
 void		ahd_qinfifo_requeue_tail(struct ahd_softc *ahd,
@@ -1343,6 +1352,8 @@ struct ahd_softc	*ahd_alloc(void *platform_arg, char *name);
 int			 ahd_softc_init(struct ahd_softc *);
 void			 ahd_controller_info(struct ahd_softc *ahd, char *buf);
 int			 ahd_init(struct ahd_softc *ahd);
+int			 ahd_suspend(struct ahd_softc *ahd);
+void			 ahd_resume(struct ahd_softc *ahd);
 int			 ahd_default_config(struct ahd_softc *ahd);
 int			 ahd_parse_vpddata(struct ahd_softc *ahd,
 					   struct vpd_config *vpd);
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 05f692bd0adc..a7dd8cdda472 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -7175,7 +7175,6 @@ ahd_pause_and_flushwork(struct ahd_softc *ahd)
 	ahd->flags &= ~AHD_ALL_INTERRUPTS;
 }
 
-#if 0
 int
 ahd_suspend(struct ahd_softc *ahd)
 {
@@ -7189,19 +7188,15 @@ ahd_suspend(struct ahd_softc *ahd)
 	ahd_shutdown(ahd);
 	return (0);
 }
-#endif  /*  0  */
 
-#if 0
-int
+void
 ahd_resume(struct ahd_softc *ahd)
 {
 
 	ahd_reset(ahd, /*reinit*/TRUE);
 	ahd_intr_enable(ahd, TRUE); 
 	ahd_restart(ahd);
-	return (0);
 }
-#endif  /*  0  */
 
 /************************** Busy Target Table *********************************/
 /*
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 42c0f14a262c..2d020405480c 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -315,8 +315,8 @@ uint32_t aic79xx_slowcrc;
  */
 static char *aic79xx = NULL;
 
-MODULE_AUTHOR("Maintainer: Justin T. Gibbs <gibbs@scsiguy.com>");
-MODULE_DESCRIPTION("Adaptec Aic790X U320 SCSI Host Bus Adapter driver");
+MODULE_AUTHOR("Maintainer: Hannes Reinecke <hare@suse.de>");
+MODULE_DESCRIPTION("Adaptec AIC790X U320 SCSI Host Bus Adapter driver");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_VERSION(AIC79XX_DRIVER_VERSION);
 module_param(aic79xx, charp, 0444);
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
index c62ce41f2793..66f0259edb69 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
@@ -50,6 +50,8 @@ static int	ahd_linux_pci_reserve_io_regions(struct ahd_softc *ahd,
 static int	ahd_linux_pci_reserve_mem_region(struct ahd_softc *ahd,
 						 u_long *bus_addr,
 						 uint8_t __iomem **maddr);
+static int	ahd_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg);
+static int	ahd_linux_pci_dev_resume(struct pci_dev *pdev);
 static void	ahd_linux_pci_dev_remove(struct pci_dev *pdev);
 
 /* Define the macro locally since it's different for different class of chips.
@@ -86,10 +88,58 @@ MODULE_DEVICE_TABLE(pci, ahd_linux_pci_id_table);
 static struct pci_driver aic79xx_pci_driver = {
 	.name		= "aic79xx",
 	.probe		= ahd_linux_pci_dev_probe,
+#ifdef CONFIG_PM
+	.suspend	= ahd_linux_pci_dev_suspend,
+	.resume		= ahd_linux_pci_dev_resume,
+#endif
 	.remove		= ahd_linux_pci_dev_remove,
 	.id_table	= ahd_linux_pci_id_table
 };
 
+static int
+ahd_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+	struct ahd_softc *ahd = pci_get_drvdata(pdev);
+	int rc;
+
+	if ((rc = ahd_suspend(ahd)))
+		return rc;
+
+	ahd_pci_suspend(ahd);
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+
+	if (mesg.event == PM_EVENT_SUSPEND)
+		pci_set_power_state(pdev, PCI_D3hot);
+
+	return rc;
+}
+
+static int
+ahd_linux_pci_dev_resume(struct pci_dev *pdev)
+{
+	struct ahd_softc *ahd = pci_get_drvdata(pdev);
+	int rc;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+
+	if ((rc = pci_enable_device(pdev))) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "failed to enable device after resume (%d)\n", rc);
+		return rc;
+	}
+
+	pci_set_master(pdev);
+
+	ahd_pci_resume(ahd);
+
+	ahd_resume(ahd);
+
+	return rc;
+}
+
 static void
 ahd_linux_pci_dev_remove(struct pci_dev *pdev)
 {
diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c
index 0bada0028aa0..7a203a90601a 100644
--- a/drivers/scsi/aic7xxx/aic79xx_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_pci.c
@@ -389,6 +389,33 @@ ahd_pci_config(struct ahd_softc *ahd, struct ahd_pci_identity *entry)
 	return error;
 }
 
+void
+ahd_pci_suspend(struct ahd_softc *ahd)
+{
+	/*
+	 * Save chip register configuration data for chip resets
+	 * that occur during runtime and resume events.
+	 */
+	ahd->suspend_state.pci_state.devconfig =
+	    ahd_pci_read_config(ahd->dev_softc, DEVCONFIG, /*bytes*/4);
+	ahd->suspend_state.pci_state.command =
+	    ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/1);
+	ahd->suspend_state.pci_state.csize_lattime =
+	    ahd_pci_read_config(ahd->dev_softc, CSIZE_LATTIME, /*bytes*/1);
+
+}
+
+void
+ahd_pci_resume(struct ahd_softc *ahd)
+{
+	ahd_pci_write_config(ahd->dev_softc, DEVCONFIG,
+			     ahd->suspend_state.pci_state.devconfig, /*bytes*/4);
+	ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
+			     ahd->suspend_state.pci_state.command, /*bytes*/1);
+	ahd_pci_write_config(ahd->dev_softc, CSIZE_LATTIME,
+			     ahd->suspend_state.pci_state.csize_lattime, /*bytes*/1);
+}
+
 /*
  * Perform some simple tests that should catch situations where
  * our registers are invalidly mapped.
diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h
index e1bd57b9f23d..3d4e42d90452 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.h
+++ b/drivers/scsi/aic7xxx/aic7xxx.h
@@ -962,16 +962,6 @@ struct ahc_softc {
 	ahc_bus_chip_init_t	  bus_chip_init;
 
 	/*
-	 * Bus specific suspend routine.
-	 */
-	ahc_bus_suspend_t	  bus_suspend;
-
-	/*
-	 * Bus specific resume routine.
-	 */
-	ahc_bus_resume_t	  bus_resume;
-
-	/*
 	 * Target mode related state kept on a per enabled lun basis.
 	 * Targets that are not enabled will have null entries.
 	 * As an initiator, we keep one target entry for our initiator
@@ -1153,6 +1143,7 @@ struct ahc_pci_identity	*ahc_find_pci_device(ahc_dev_softc_t);
 int			 ahc_pci_config(struct ahc_softc *,
 					struct ahc_pci_identity *);
 int			 ahc_pci_test_register_access(struct ahc_softc *);
+void			 ahc_pci_resume(struct ahc_softc *ahc);
 
 /*************************** EISA/VL Front End ********************************/
 struct aic7770_identity *aic7770_find_device(uint32_t);
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 7770befbf50c..390b0fc991c5 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -335,8 +335,8 @@ static uint32_t aic7xxx_periodic_otag;
  */
 static char *aic7xxx = NULL;
 
-MODULE_AUTHOR("Maintainer: Justin T. Gibbs <gibbs@scsiguy.com>");
-MODULE_DESCRIPTION("Adaptec Aic77XX/78XX SCSI Host Bus Adapter driver");
+MODULE_AUTHOR("Maintainer: Hannes Reinecke <hare@suse.de>");
+MODULE_DESCRIPTION("Adaptec AIC77XX/78XX SCSI Host Bus Adapter driver");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_VERSION(AIC7XXX_DRIVER_VERSION);
 module_param(aic7xxx, charp, 0444);
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
index ea5687df732d..4488946cff2e 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
@@ -49,6 +49,8 @@ static int	ahc_linux_pci_reserve_io_region(struct ahc_softc *ahc,
 static int	ahc_linux_pci_reserve_mem_region(struct ahc_softc *ahc,
 						 u_long *bus_addr,
 						 uint8_t __iomem **maddr);
+static int	ahc_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg);
+static int	ahc_linux_pci_dev_resume(struct pci_dev *pdev);
 static void	ahc_linux_pci_dev_remove(struct pci_dev *pdev);
 
 /* Define the macro locally since it's different for different class of chips.
@@ -133,10 +135,54 @@ MODULE_DEVICE_TABLE(pci, ahc_linux_pci_id_table);
 static struct pci_driver aic7xxx_pci_driver = {
 	.name		= "aic7xxx",
 	.probe		= ahc_linux_pci_dev_probe,
+#ifdef CONFIG_PM
+	.suspend	= ahc_linux_pci_dev_suspend,
+	.resume		= ahc_linux_pci_dev_resume,
+#endif
 	.remove		= ahc_linux_pci_dev_remove,
 	.id_table	= ahc_linux_pci_id_table
 };
 
+static int
+ahc_linux_pci_dev_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+	struct ahc_softc *ahc = pci_get_drvdata(pdev);
+	int rc;
+
+	if ((rc = ahc_suspend(ahc)))
+		return rc;
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+
+	if (mesg.event == PM_EVENT_SUSPEND)
+		pci_set_power_state(pdev, PCI_D3hot);
+
+	return rc;
+}
+
+static int
+ahc_linux_pci_dev_resume(struct pci_dev *pdev)
+{
+	struct ahc_softc *ahc = pci_get_drvdata(pdev);
+	int rc;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+
+	if ((rc = pci_enable_device(pdev))) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "failed to enable device after resume (%d)\n", rc);
+		return rc;
+	}
+
+	pci_set_master(pdev);
+
+	ahc_pci_resume(ahc);
+
+	return (ahc_resume(ahc));
+}
+
 static void
 ahc_linux_pci_dev_remove(struct pci_dev *pdev)
 {
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c
index 09c8172c9e5e..ae35937b8055 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c
@@ -633,8 +633,6 @@ static void    write_brdctl(struct ahc_softc *ahc, uint8_t value);
 static uint8_t read_brdctl(struct ahc_softc *ahc);
 static void ahc_pci_intr(struct ahc_softc *ahc);
 static int  ahc_pci_chip_init(struct ahc_softc *ahc);
-static int  ahc_pci_suspend(struct ahc_softc *ahc);
-static int  ahc_pci_resume(struct ahc_softc *ahc);
 
 static int
 ahc_9005_subdevinfo_valid(uint16_t device, uint16_t vendor,
@@ -791,8 +789,6 @@ ahc_pci_config(struct ahc_softc *ahc, struct ahc_pci_identity *entry)
 
 	ahc->bus_intr = ahc_pci_intr;
 	ahc->bus_chip_init = ahc_pci_chip_init;
-	ahc->bus_suspend = ahc_pci_suspend;
-	ahc->bus_resume = ahc_pci_resume;
 
 	/* Remeber how the card was setup in case there is no SEEPROM */
 	if ((ahc_inb(ahc, HCNTRL) & POWRDN) == 0) {
@@ -2024,18 +2020,9 @@ ahc_pci_chip_init(struct ahc_softc *ahc)
 	return (ahc_chip_init(ahc));
 }
 
-static int
-ahc_pci_suspend(struct ahc_softc *ahc)
-{
-	return (ahc_suspend(ahc));
-}
-
-static int
+void
 ahc_pci_resume(struct ahc_softc *ahc)
 {
-
-	pci_set_power_state(ahc->dev_softc, AHC_POWER_STATE_D0);
-
 	/*
 	 * We assume that the OS has restored our register
 	 * mappings, etc.  Just update the config space registers
@@ -2063,7 +2050,6 @@ ahc_pci_resume(struct ahc_softc *ahc)
 				      &sxfrctl1);
 		ahc_release_seeprom(&sd);
 	}
-	return (ahc_resume(ahc));
 }
 
 static int
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.l b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.l
index f06e7035cb35..c0457b8c3b77 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.l
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.l
@@ -66,6 +66,7 @@ static char string_buf[MAX_STR_CONST];
 static char *string_buf_ptr;
 static int  parren_count;
 static char buf[255];
+int  mmlineno;
 %}
 
 WORD		[A-Za-z_][-A-Za-z_0-9]*
@@ -76,7 +77,7 @@ MCARG		[^(), \t]+
 
 %%
 \n			{
-				++yylineno;
+				++mmlineno;
 			}
 \r			;
 <ARGLIST>{SPACE}	;
diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c
index 4025608d6964..8f8db5f0aef7 100644
--- a/drivers/scsi/aic7xxx_old.c
+++ b/drivers/scsi/aic7xxx_old.c
@@ -8417,7 +8417,7 @@ aic7xxx_alloc(struct scsi_host_template *sht, struct aic7xxx_host *temp)
     p->host = host;
 
     p->scb_data = kzalloc(sizeof(scb_data_type), GFP_ATOMIC);
-    if (!p->scb_data)
+    if (p->scb_data)
     {
       scbq_init (&p->scb_data->free_scbs);
     }
diff --git a/drivers/scsi/fcal.c b/drivers/scsi/fcal.c
deleted file mode 100644
index c4e16c0775de..000000000000
--- a/drivers/scsi/fcal.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/* fcal.c: Fibre Channel Arbitrated Loop SCSI host adapter driver.
- *
- * Copyright (C) 1998,1999 Jakub Jelinek (jj@ultra.linux.cz)
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#ifdef CONFIG_KMOD
-#include <linux/kmod.h>
-#endif
-
-#include <asm/irq.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "../fc4/fcp_impl.h"
-#include "fcal.h"
-
-#include <linux/module.h>
-
-/* #define FCAL_DEBUG */
-
-#define fcal_printk printk ("FCAL %s: ", fc->name); printk
-
-#ifdef FCAL_DEBUG
-#define FCALD(x)  fcal_printk x;
-#define FCALND(x) printk ("FCAL: "); printk x;
-#else
-#define FCALD(x)
-#define FCALND(x)
-#endif
-
-static unsigned char alpa2target[] = {
-0x7e, 0x7d, 0x7c, 0xff, 0x7b, 0xff, 0xff, 0xff, 0x7a, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x79,
-0x78, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x77, 0x76, 0xff, 0xff, 0x75, 0xff, 0x74, 0x73, 0x72,
-0xff, 0xff, 0xff, 0x71, 0xff, 0x70, 0x6f, 0x6e, 0xff, 0x6d, 0x6c, 0x6b, 0x6a, 0x69, 0x68, 0xff,
-0xff, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, 0xff, 0xff, 0x61, 0x60, 0xff, 0x5f, 0xff, 0xff, 0xff,
-0xff, 0xff, 0xff, 0x5e, 0xff, 0x5d, 0x5c, 0x5b, 0xff, 0x5a, 0x59, 0x58, 0x57, 0x56, 0x55, 0xff,
-0xff, 0x54, 0x53, 0x52, 0x51, 0x50, 0x4f, 0xff, 0xff, 0x4e, 0x4d, 0xff, 0x4c, 0xff, 0xff, 0xff,
-0xff, 0xff, 0xff, 0x4b, 0xff, 0x4a, 0x49, 0x48, 0xff, 0x47, 0x46, 0x45, 0x44, 0x43, 0x42, 0xff,
-0xff, 0x41, 0x40, 0x3f, 0x3e, 0x3d, 0x3c, 0xff, 0xff, 0x3b, 0x3a, 0xff, 0x39, 0xff, 0xff, 0xff,
-0x38, 0x37, 0x36, 0xff, 0x35, 0xff, 0xff, 0xff, 0x34, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x33,
-0x32, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x31, 0x30, 0xff, 0xff, 0x2f, 0xff, 0x2e, 0x2d, 0x2c,
-0xff, 0xff, 0xff, 0x2b, 0xff, 0x2a, 0x29, 0x28, 0xff, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0xff,
-0xff, 0x21, 0x20, 0x1f, 0x1e, 0x1d, 0x1c, 0xff, 0xff, 0x1b, 0x1a, 0xff, 0x19, 0xff, 0xff, 0xff,
-0xff, 0xff, 0xff, 0x18, 0xff, 0x17, 0x16, 0x15, 0xff, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0xff,
-0xff, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0xff, 0xff, 0x08, 0x07, 0xff, 0x06, 0xff, 0xff, 0xff,
-0x05, 0x04, 0x03, 0xff, 0x02, 0xff, 0xff, 0xff, 0x01, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
-};
-
-static unsigned char target2alpa[] = {
-0xef, 0xe8, 0xe4, 0xe2, 0xe1, 0xe0, 0xdc, 0xda, 0xd9, 0xd6, 0xd5, 0xd4, 0xd3, 0xd2, 0xd1, 0xce,
-0xcd, 0xcc, 0xcb, 0xca, 0xc9, 0xc7, 0xc6, 0xc5, 0xc3, 0xbc, 0xba, 0xb9, 0xb6, 0xb5, 0xb4, 0xb3,
-0xb2, 0xb1, 0xae, 0xad, 0xac, 0xab, 0xaa, 0xa9, 0xa7, 0xa6, 0xa5, 0xa3, 0x9f, 0x9e, 0x9d, 0x9b,
-0x98, 0x97, 0x90, 0x8f, 0x88, 0x84, 0x82, 0x81, 0x80, 0x7c, 0x7a, 0x79, 0x76, 0x75, 0x74, 0x73,
-0x72, 0x71, 0x6e, 0x6d, 0x6c, 0x6b, 0x6a, 0x69, 0x67, 0x66, 0x65, 0x63, 0x5c, 0x5a, 0x59, 0x56,
-0x55, 0x54, 0x53, 0x52, 0x51, 0x4e, 0x4d, 0x4c, 0x4b, 0x4a, 0x49, 0x47, 0x46, 0x45, 0x43, 0x3c,
-0x3a, 0x39, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0x2e, 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x27, 0x26,
-0x25, 0x23, 0x1f, 0x1e, 0x1d, 0x1b, 0x18, 0x17, 0x10, 0x0f, 0x08, 0x04, 0x02, 0x01, 0x00
-};
-
-static int fcal_encode_addr(Scsi_Cmnd *SCpnt, u16 *addr, fc_channel *fc, fcp_cmnd *fcmd);
-
-int fcal_slave_configure(struct scsi_device *device)
-{
-	int depth_to_use;
-	
-	if (device->tagged_supported)
-		depth_to_use = /* 254 */ 8;
-	else
-		depth_to_use = 2;
-
-	scsi_adjust_queue_depth(device,
-				(device->tagged_supported ?
-				 MSG_SIMPLE_TAG : 0),
-				depth_to_use);
-
-	return 0;
-}
-
-/* Detect all FC Arbitrated Loops attached to the machine.
-   fc4 module has done all the work for us... */
-int __init fcal_detect(struct scsi_host_template *tpnt)
-{
-	int nfcals = 0;
-	fc_channel *fc;
-	int fcalcount;
-	int i;
-
-	tpnt->proc_name = "fcal";
-	fcalcount = 0;
-	for_each_online_fc_channel(fc)
-		if (fc->posmap)
-			fcalcount++;
-	FCALND(("%d channels online\n", fcalcount))
-	if (!fcalcount) {
-#if defined(MODULE) && defined(CONFIG_FC4_SOCAL_MODULE) && defined(CONFIG_KMOD)
-		request_module("socal");
-		
-		for_each_online_fc_channel(fc)
-			if (fc->posmap)
-				fcalcount++;
-		if (!fcalcount)
-#endif
-			return 0;
-	}
-	for_each_online_fc_channel(fc) {
-		struct Scsi_Host *host;
-		long *ages;
-		struct fcal *fcal;
-		
-		if (!fc->posmap) continue;
-		
-		/* Strange, this is already registered to some other SCSI host, then it cannot be fcal */
-		if (fc->scsi_name[0]) continue;
-		memcpy (fc->scsi_name, "FCAL", 4);
-		
-		fc->can_queue = FCAL_CAN_QUEUE;
-		fc->rsp_size = 64;
-		fc->encode_addr = fcal_encode_addr;
-		
-		ages = kmalloc (128 * sizeof(long), GFP_KERNEL);
-		if (!ages) continue;
-				
-		host = scsi_register (tpnt, sizeof (struct fcal));
-		if (!host) 
-		{
-			kfree(ages);
-			continue;
-		}
-				
-		if (!try_module_get(fc->module)) {
-			kfree(ages);
-			scsi_unregister(host);
-			continue;
-		}
-	
-		nfcals++;
-				
-		fcal = (struct fcal *)host->hostdata;
-		
-		fc->fcp_register(fc, TYPE_SCSI_FCP, 0);
-
-		for (i = 0; i < fc->posmap->len; i++) {
-			int status, target, alpa;
-
-			alpa = fc->posmap->list[i];			
-			FCALD(("Sending PLOGI to %02x\n", alpa))
-			target = alpa2target[alpa];
-			status = fc_do_plogi(fc, alpa, fcal->node_wwn + target, 
-					     fcal->nport_wwn + target);
-			FCALD(("PLOGI returned with status %d\n", status))
-			if (status != FC_STATUS_OK)
-				continue;
-			FCALD(("Sending PRLI to %02x\n", alpa))
-			status = fc_do_prli(fc, alpa);
-			FCALD(("PRLI returned with status %d\n", status))
-			if (status == FC_STATUS_OK)
-				fcal->map[target] = 1;
-		}
-		
-		host->max_id = 127;
-		host->irq = fc->irq;
-#ifdef __sparc_v9__
-		host->unchecked_isa_dma = 1;
-#endif
-
-		fc->channels = 1;
-		fc->targets = 127;
-		fc->ages = ages;
-		memset (ages, 0, 128 * sizeof(long));
-				
-		fcal->fc = fc;
-		
-		FCALD(("Found FCAL\n"))
-	}
-	if (nfcals)
-#ifdef __sparc__
-		printk ("FCAL: Total of %d Sun Enterprise Network Array (A5000 or EX500) channels found\n", nfcals);
-#else
-		printk ("FCAL: Total of %d Fibre Channel Arbitrated Loops found\n", nfcals);
-#endif
-	return nfcals;
-}
-
-int fcal_release(struct Scsi_Host *host)
-{
-	struct fcal *fcal = (struct fcal *)host->hostdata;
-	fc_channel *fc = fcal->fc;
-
-	module_put(fc->module);
-	
-	fc->fcp_register(fc, TYPE_SCSI_FCP, 1);
-	FCALND((" releasing fcal.\n"));
-	kfree (fc->ages);
-	FCALND(("released fcal!\n"));
-	return 0;
-}
-
-#undef SPRINTF
-#define SPRINTF(args...) { if (pos < (buffer + length)) pos += sprintf (pos, ## args); }
-
-int fcal_proc_info (struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int inout)
-{
-	struct fcal *fcal;
-	fc_channel *fc;
-	char *pos = buffer;
-	int i, j;
-
-	if (inout) return length;
-    
-	fcal = (struct fcal *)host->hostdata;
-	fc = fcal->fc;
-
-#ifdef __sparc__
-	SPRINTF ("Sun Enterprise Network Array (A5000 or E?500) on %s PROM node %x\n", fc->name, fc->dev->prom_node);
-#else
-	SPRINTF ("Fibre Channel Arbitrated Loop on %s\n", fc->name);
-#endif
-	SPRINTF ("Initiator AL-PA: %02x\n", fc->sid);
-
-	SPRINTF ("\nAttached devices:\n");
-	
-	for (i = 0; i < fc->posmap->len; i++) {
-		unsigned char alpa = fc->posmap->list[i];
-		unsigned char target;
-		u32 *u1, *u2;
-		
-		target = alpa2target[alpa];
-		u1 = (u32 *)&fcal->nport_wwn[target];
-		u2 = (u32 *)&fcal->node_wwn[target];
-		if (!u1[0] && !u1[1]) {
-			SPRINTF ("  [AL-PA: %02x] Not r