[SCSI] lpfc 8.3.33: Fix error when remote port switches address

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

2 files changed, 59 insertions, 8 deletions

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index d54ae1999797..3c624a5494af 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1476,6 +1476,10 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 		return ndlp;
 	memset(&rrq.xri_bitmap, 0, sizeof(new_ndlp->active_rrqs.xri_bitmap));
 
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+		 "3178 PLOGI confirm: ndlp %p x%x: new_ndlp %p\n",
+		 ndlp, ndlp->nlp_DID, new_ndlp);
+
 	if (!new_ndlp) {
 		rc = memcmp(&ndlp->nlp_portname, name,
 			    sizeof(struct lpfc_name));
@@ -1527,6 +1531,9 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 		/* The new_ndlp is replacing ndlp totally, so we need
 		 * to put ndlp on UNUSED list and try to free it.
 		 */
+		lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+			 "3179 PLOGI confirm NEW: %x %x\n",
+			 new_ndlp->nlp_DID, keepDID);
 
 		/* Fix up the rport accordingly */
 		rport =  ndlp->rport;
@@ -1559,23 +1566,34 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 		lpfc_drop_node(vport, ndlp);
 	}
 	else {
+		lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+			 "3180 PLOGI confirm SWAP: %x %x\n",
+			 new_ndlp->nlp_DID, keepDID);
+
 		lpfc_unreg_rpi(vport, ndlp);
+
 		/* Two ndlps cannot have the same did */
 		ndlp->nlp_DID = keepDID;
 		if (phba->sli_rev == LPFC_SLI_REV4)
 			memcpy(&ndlp->active_rrqs.xri_bitmap,
 				&rrq.xri_bitmap,
 				sizeof(ndlp->active_rrqs.xri_bitmap));
+
 		/* Since we are swapping the ndlp passed in with the new one
-		 * and the did has already been swapped, copy over the
-		 * state and names.
+		 * and the did has already been swapped, copy over state.
+		 * The new WWNs are already in new_ndlp since thats what
+		 * we looked it up by in the begining of this routine.
 		 */
-		memcpy(&new_ndlp->nlp_portname, &ndlp->nlp_portname,
-			sizeof(struct lpfc_name));
-		memcpy(&new_ndlp->nlp_nodename, &ndlp->nlp_nodename,
-			sizeof(struct lpfc_name));
 		new_ndlp->nlp_state = ndlp->nlp_state;
-		lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
+
+		/* Since we are switching over to the new_ndlp, the old
+		 * ndlp should be put in the NPR state, unless we have
+		 * already started re-discovery on it.
+		 */
+		if ((ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) ||
+		    (ndlp->nlp_state == NLP_STE_MAPPED_NODE))
+			lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
+
 		/* Fix up the rport accordingly */
 		rport = ndlp->rport;
 		if (rport) {
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 9b4f92941dce..6b36d95668c0 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -123,6 +123,10 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
 		"rport devlosscb: sid:x%x did:x%x flg:x%x",
 		ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag);
 
+	lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
+			 "3181 dev_loss_callbk x%06x, rport %p flg x%x\n",
+			 ndlp->nlp_DID, ndlp->rport, ndlp->nlp_flag);
+
 	/* Don't defer this if we are in the process of deleting the vport
 	 * or unloading the driver. The unload will cleanup the node
 	 * appropriately we just need to cleanup the ndlp rport info here.
@@ -142,6 +146,15 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
 	if (ndlp->nlp_state == NLP_STE_MAPPED_NODE)
 		return;
 
+	if (ndlp->nlp_type & NLP_FABRIC) {
+
+		/* If the WWPN of the rport and ndlp don't match, ignore it */
+		if (rport->port_name != wwn_to_u64(ndlp->nlp_portname.u.wwn)) {
+			put_device(&rport->dev);
+			return;
+		}
+	}
+
 	evtp = &ndlp->dev_loss_evt;
 
 	if (!list_empty(&evtp->evt_listp))
@@ -202,6 +215,10 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
 		"rport devlosstmo:did:x%x type:x%x id:x%x",
 		ndlp->nlp_DID, ndlp->nlp_type, rport->scsi_target_id);
 
+	lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
+			 "3182 dev_loss_tmo_handler x%06x, rport %p flg x%x\n",
+			 ndlp->nlp_DID, ndlp->rport, ndlp->nlp_flag);
+
 	/* Don't defer this if we are in the process of deleting the vport
 	 * or unloading the driver. The unload will cleanup the node
 	 * appropriately we just need to cleanup the ndlp rport info here.
@@ -3834,6 +3851,10 @@ lpfc_register_remote_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 	if (rport_ids.roles !=  FC_RPORT_ROLE_UNKNOWN)
 		fc_remote_port_rolechg(rport, rport_ids.roles);
 
+	lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
+			 "3183 rport register x%06x, rport %p role x%x\n",
+			 ndlp->nlp_DID, rport, rport_ids.roles);
+
 	if ((rport->scsi_target_id != -1) &&
 	    (rport->scsi_target_id < LPFC_MAX_TARGET)) {
 		ndlp->nlp_sid = rport->scsi_target_id;
@@ -3850,6 +3871,10 @@ lpfc_unregister_remote_port(struct lpfc_nodelist *ndlp)
 		"rport delete:    did:x%x flg:x%x type x%x",
 		ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
 
+	lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
+			 "3184 rport unregister x%06x, rport %p\n",
+			 ndlp->nlp_DID, rport);
+
 	fc_remote_port_delete(rport);
 
 	return;
@@ -5365,9 +5390,17 @@ __lpfc_find_node(struct lpfc_vport *vport, node_filter filter, void *param)
 	struct lpfc_nodelist *ndlp;
 
 	list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
-		if (filter(ndlp, param))
+		if (filter(ndlp, param)) {
+			lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
+					 "3185 FIND node filter %p DID "
+					 "Data: x%p x%x x%x\n",
+					 filter, ndlp, ndlp->nlp_DID,
+					 ndlp->nlp_flag);
 			return ndlp;
+		}
 	}
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
+			 "3186 FIND node filter %p NOT FOUND.\n", filter);
 	return NULL;
 }