[SCSI] arcmsr: initial driver, version 1.20.00.13

arcmsr is a driver for the Areca Raid controller, a host based RAID
subsystem that speaks SCSI at the firmware level.

This patch is quite a clean up over the initial submission with
contributions from:

Randy Dunlap <rdunlap@xenotime.net>
Christoph Hellwig <hch@lst.de>
Matthew Wilcox <matthew@wil.cx>
Adrian Bunk <bunk@stusta.de>

Signed-off-by: Erich Chen <erich@areca.com.tw>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

4 files changed, 2366 insertions, 0 deletions

diff --git a/drivers/scsi/arcmsr/Makefile b/drivers/scsi/arcmsr/Makefile
new file mode 100644
index 000000000000..721aced39168
--- /dev/null
+++ b/drivers/scsi/arcmsr/Makefile
@@ -0,0 +1,6 @@
+# File: drivers/arcmsr/Makefile
+# Makefile for the ARECA PCI-X PCI-EXPRESS SATA RAID controllers SCSI driver.
+
+arcmsr-objs := arcmsr_attr.o arcmsr_hba.o
+
+obj-$(CONFIG_SCSI_ARCMSR) := arcmsr.o
diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
new file mode 100644
index 000000000000..aff96db9ccf6
--- /dev/null
+++ b/drivers/scsi/arcmsr/arcmsr.h
@@ -0,0 +1,472 @@
+/*
+*******************************************************************************
+**        O.S   : Linux
+**   FILE NAME  : arcmsr.h
+**        BY    : Erich Chen
+**   Description: SCSI RAID Device Driver for
+**                ARECA RAID Host adapter
+*******************************************************************************
+** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved.
+**
+**     Web site: www.areca.com.tw
+**       E-mail: erich@areca.com.tw
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License version 2 as
+** published by the Free Software Foundation.
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU General Public License for more details.
+*******************************************************************************
+** Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions
+** are met:
+** 1. Redistributions of source code must retain the above copyright
+**    notice, this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright
+**    notice, this list of conditions and the following disclaimer in the
+**    documentation and/or other materials provided with the distribution.
+** 3. The name of the author may not be used to endorse or promote products
+**    derived from this software without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT
+** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+**(INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF
+** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************
+*/
+#include <linux/interrupt.h>
+
+struct class_device_attribute;
+
+#define ARCMSR_MAX_OUTSTANDING_CMD 						256
+#define ARCMSR_MAX_FREECCB_NUM							288
+#define ARCMSR_DRIVER_VERSION				"Driver Version 1.20.00.13"
+#define ARCMSR_SCSI_INITIATOR_ID						255
+#define ARCMSR_MAX_XFER_SECTORS							512
+#define ARCMSR_MAX_TARGETID							 17
+#define ARCMSR_MAX_TARGETLUN							  8
+#define ARCMSR_MAX_CMD_PERLUN				 ARCMSR_MAX_OUTSTANDING_CMD
+#define ARCMSR_MAX_QBUFFER						       4096
+#define ARCMSR_MAX_SG_ENTRIES							 38
+
+/*
+*******************************************************************************
+**        split 64bits dma addressing
+*******************************************************************************
+*/
+#define dma_addr_hi32(addr)               (uint32_t) ((addr>>16)>>16)
+#define dma_addr_lo32(addr)               (uint32_t) (addr & 0xffffffff)
+/*
+*******************************************************************************
+**        MESSAGE CONTROL CODE
+*******************************************************************************
+*/
+struct CMD_MESSAGE
+{
+      uint32_t HeaderLength;
+      uint8_t  Signature[8];
+      uint32_t Timeout;
+      uint32_t ControlCode;
+      uint32_t ReturnCode;
+      uint32_t Length;
+};
+/*
+*******************************************************************************
+**        IOP Message Transfer Data for user space
+*******************************************************************************
+*/
+struct CMD_MESSAGE_FIELD
+{
+    struct CMD_MESSAGE			cmdmessage;
+    uint8_t				messagedatabuffer[1032];
+};
+/* IOP message transfer */
+#define ARCMSR_MESSAGE_FAIL             0x0001
+/* DeviceType */
+#define ARECA_SATA_RAID				0x90000000
+/* FunctionCode */
+#define FUNCTION_READ_RQBUFFER			0x0801
+#define FUNCTION_WRITE_WQBUFFER			0x0802
+#define FUNCTION_CLEAR_RQBUFFER			0x0803
+#define FUNCTION_CLEAR_WQBUFFER			0x0804
+#define FUNCTION_CLEAR_ALLQBUFFER		0x0805
+#define FUNCTION_RETURN_CODE_3F			0x0806
+#define FUNCTION_SAY_HELLO			0x0807
+#define FUNCTION_SAY_GOODBYE			0x0808
+#define FUNCTION_FLUSH_ADAPTER_CACHE		0x0809
+/* ARECA IO CONTROL CODE*/
+#define ARCMSR_MESSAGE_READ_RQBUFFER       \
+	ARECA_SATA_RAID | FUNCTION_READ_RQBUFFER
+#define ARCMSR_MESSAGE_WRITE_WQBUFFER      \
+	ARECA_SATA_RAID | FUNCTION_WRITE_WQBUFFER
+#define ARCMSR_MESSAGE_CLEAR_RQBUFFER      \
+	ARECA_SATA_RAID | FUNCTION_CLEAR_RQBUFFER
+#define ARCMSR_MESSAGE_CLEAR_WQBUFFER      \
+	ARECA_SATA_RAID | FUNCTION_CLEAR_WQBUFFER
+#define ARCMSR_MESSAGE_CLEAR_ALLQBUFFER    \
+	ARECA_SATA_RAID | FUNCTION_CLEAR_ALLQBUFFER
+#define ARCMSR_MESSAGE_RETURN_CODE_3F      \
+	ARECA_SATA_RAID | FUNCTION_RETURN_CODE_3F
+#define ARCMSR_MESSAGE_SAY_HELLO           \
+	ARECA_SATA_RAID | FUNCTION_SAY_HELLO
+#define ARCMSR_MESSAGE_SAY_GOODBYE         \
+	ARECA_SATA_RAID | FUNCTION_SAY_GOODBYE
+#define ARCMSR_MESSAGE_FLUSH_ADAPTER_CACHE \
+	ARECA_SATA_RAID | FUNCTION_FLUSH_ADAPTER_CACHE
+/* ARECA IOCTL ReturnCode */
+#define ARCMSR_MESSAGE_RETURNCODE_OK              0x00000001
+#define ARCMSR_MESSAGE_RETURNCODE_ERROR           0x00000006
+#define ARCMSR_MESSAGE_RETURNCODE_3F              0x0000003F
+/*
+*************************************************************
+**   structure for holding DMA address data
+*************************************************************
+*/
+#define IS_SG64_ADDR                0x01000000 /* bit24 */
+struct  SG32ENTRY
+{
+	uint32_t					length;
+	uint32_t					address;
+};
+struct  SG64ENTRY
+{
+ 	uint32_t					length;
+ 	uint32_t					address;
+ 	uint32_t					addresshigh;
+};
+struct SGENTRY_UNION
+{
+	union
+	{
+		struct SG32ENTRY            sg32entry;
+		struct SG64ENTRY            sg64entry;
+	}u;
+};
+/*
+********************************************************************
+**      Q Buffer of IOP Message Transfer
+********************************************************************
+*/
+struct QBUFFER
+{
+	uint32_t      data_len;
+	uint8_t       data[124];
+};
+/*
+*******************************************************************************
+**      FIRMWARE INFO
+*******************************************************************************
+*/
+struct FIRMWARE_INFO
+{
+	uint32_t      signature;                /*0, 00-03*/
+	uint32_t      request_len;              /*1, 04-07*/
+	uint32_t      numbers_queue;            /*2, 08-11*/
+	uint32_t      sdram_size;               /*3, 12-15*/
+	uint32_t      ide_channels;             /*4, 16-19*/
+	char          vendor[40];               /*5, 20-59*/
+	char          model[8];                 /*15, 60-67*/
+	char          firmware_ver[16];         /*17, 68-83*/
+	char          device_map[16];           /*21, 84-99*/
+};
+/* signature of set and get firmware config */
+#define ARCMSR_SIGNATURE_GET_CONFIG                   0x87974060
+#define ARCMSR_SIGNATURE_SET_CONFIG                   0x87974063
+/* message code of inbound message register */
+#define ARCMSR_INBOUND_MESG0_NOP                      0x00000000
+#define ARCMSR_INBOUND_MESG0_GET_CONFIG               0x00000001
+#define ARCMSR_INBOUND_MESG0_SET_CONFIG               0x00000002
+#define ARCMSR_INBOUND_MESG0_ABORT_CMD                0x00000003
+#define ARCMSR_INBOUND_MESG0_STOP_BGRB                0x00000004
+#define ARCMSR_INBOUND_MESG0_FLUSH_CACHE              0x00000005
+#define ARCMSR_INBOUND_MESG0_START_BGRB               0x00000006
+#define ARCMSR_INBOUND_MESG0_CHK331PENDING            0x00000007
+#define ARCMSR_INBOUND_MESG0_SYNC_TIMER               0x00000008
+/* doorbell interrupt generator */
+#define ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK           0x00000001
+#define ARCMSR_INBOUND_DRIVER_DATA_READ_OK            0x00000002
+#define ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK          0x00000001
+#define ARCMSR_OUTBOUND_IOP331_DATA_READ_OK           0x00000002
+/* ccb areca cdb flag */
+#define ARCMSR_CCBPOST_FLAG_SGL_BSIZE                 0x80000000
+#define ARCMSR_CCBPOST_FLAG_IAM_BIOS                  0x40000000
+#define ARCMSR_CCBREPLY_FLAG_IAM_BIOS                 0x40000000
+#define ARCMSR_CCBREPLY_FLAG_ERROR                    0x10000000
+/* outbound firmware ok */
+#define ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK             0x80000000
+/*
+*******************************************************************************
+**    ARECA SCSI COMMAND DESCRIPTOR BLOCK size 0x1F8 (504)
+*******************************************************************************
+*/
+struct ARCMSR_CDB
+{
+	uint8_t							Bus;
+	uint8_t							TargetID;
+	uint8_t							LUN;
+	uint8_t							Function;
+
+	uint8_t							CdbLength;
+	uint8_t							sgcount;
+	uint8_t							Flags;
+#define ARCMSR_CDB_FLAG_SGL_BSIZE          0x01
+#define ARCMSR_CDB_FLAG_BIOS               0x02
+#define ARCMSR_CDB_FLAG_WRITE              0x04
+#define ARCMSR_CDB_FLAG_SIMPLEQ            0x00
+#define ARCMSR_CDB_FLAG_HEADQ              0x08
+#define ARCMSR_CDB_FLAG_ORDEREDQ           0x10
+	uint8_t							Reserved1;
+
+	uint32_t						Context;
+	uint32_t						DataLength;
+
+	uint8_t							Cdb[16];
+
+	uint8_t							DeviceStatus;
+#define ARCMSR_DEV_CHECK_CONDITION          0x02
+#define ARCMSR_DEV_SELECT_TIMEOUT			0xF0
+#define ARCMSR_DEV_ABORTED				0xF1
+#define ARCMSR_DEV_INIT_FAIL				0xF2
+	uint8_t							SenseData[15];
+
+	union
+	{
+		struct SG32ENTRY                sg32entry[ARCMSR_MAX_SG_ENTRIES];
+		struct SG64ENTRY                sg64entry[ARCMSR_MAX_SG_ENTRIES];
+	} u;
+};
+/*
+*******************************************************************************
+**     Messaging Unit (MU) of the Intel R 80331 I/O processor (80331)
+*******************************************************************************
+*/
+struct MessageUnit
+{
+	uint32_t	resrved0[4];			/*0000 000F*/
+	uint32_t	inbound_msgaddr0;		/*0010 0013*/
+	uint32_t	inbound_msgaddr1;		/*0014 0017*/
+	uint32_t	outbound_msgaddr0;		/*0018 001B*/
+	uint32_t	outbound_msgaddr1;		/*001C 001F*/
+	uint32_t	inbound_doorbell;		/*0020 0023*/
+	uint32_t	inbound_intstatus;		/*0024 0027*/
+	uint32_t	inbound_intmask;		/*0028 002B*/
+	uint32_t	outbound_doorbell;		/*002C 002F*/
+	uint32_t	outbound_intstatus;		/*0030 0033*/
+	uint32_t	outbound_intmask;		/*0034 0037*/
+	uint32_t	reserved1[2];			/*0038 003F*/
+	uint32_t	inbound_queueport;		/*0040 0043*/
+	uint32_t	outbound_queueport;     	/*0044 0047*/
+	uint32_t	reserved2[2];			/*0048 004F*/
+	uint32_t	reserved3[492];			/*0050 07FF 492*/
+	uint32_t	reserved4[128];			/*0800 09FF 128*/
+	uint32_t	message_rwbuffer[256];		/*0a00 0DFF 256*/
+	uint32_t	message_wbuffer[32];		/*0E00 0E7F  32*/
+	uint32_t	reserved5[32];			/*0E80 0EFF  32*/
+	uint32_t	message_rbuffer[32];		/*0F00 0F7F  32*/
+	uint32_t	reserved6[32];			/*0F80 0FFF  32*/
+};
+/*
+*******************************************************************************
+**                 Adapter Control Block
+*******************************************************************************
+*/
+struct AdapterControlBlock
+{
+	struct pci_dev *		pdev;
+	struct Scsi_Host *		host;
+	unsigned long			vir2phy_offset;
+	/* Offset is used in making arc cdb physical to virtual calculations */
+	uint32_t			outbound_int_enable;
+
+	struct MessageUnit __iomem *		pmu;
+	/* message unit ATU inbound base address0 */
+
+	uint32_t			acb_flags;
+#define ACB_F_SCSISTOPADAPTER         0x0001
+#define ACB_F_MSG_STOP_BGRB           0x0002
+	/* stop RAID background rebuild */
+#define ACB_F_MSG_START_BGRB          0x0004
+	/* stop RAID background rebuild */
+#define ACB_F_IOPDATA_OVERFLOW        0x0008
+	/* iop message data rqbuffer overflow */
+#define ACB_F_MESSAGE_WQBUFFER_CLEARED  0x0010
+	/* message clear wqbuffer */
+#define ACB_F_MESSAGE_RQBUFFER_CLEARED  0x0020
+	/* message clear rqbuffer */
+#define ACB_F_MESSAGE_WQBUFFER_READED   0x0040
+#define ACB_F_BUS_RESET               0x0080
+#define ACB_F_IOP_INITED              0x0100
+	/* iop init */
+
+	struct CommandControlBlock *			pccb_pool[ARCMSR_MAX_FREECCB_NUM];
+	/* used for memory free */
+	struct list_head		ccb_free_list;
+	/* head of free ccb list */
+	atomic_t			ccboutstandingcount;
+
+	void *				dma_coherent;
+	/* dma_coherent used for memory free */
+	dma_addr_t			dma_coherent_handle;
+	/* dma_coherent_handle used for memory free */
+
+	uint8_t				rqbuffer[ARCMSR_MAX_QBUFFER];
+	/* data collection buffer for read from 80331 */
+	int32_t				rqbuf_firstindex;
+	/* first of read buffer  */
+	int32_t				rqbuf_lastindex;
+	/* last of read buffer   */
+	uint8_t				wqbuffer[ARCMSR_MAX_QBUFFER];
+	/* data collection buffer for write to 80331  */
+	int32_t				wqbuf_firstindex;
+	/* first of write buffer */
+	int32_t				wqbuf_lastindex;
+	/* last of write buffer  */
+	uint8_t				devstate[ARCMSR_MAX_TARGETID][ARCMSR_MAX_TARGETLUN];
+	/* id0 ..... id15, lun0...lun7 */
+#define ARECA_RAID_GONE               0x55
+#define ARECA_RAID_GOOD               0xaa
+	uint32_t			num_resets;
+	uint32_t			num_aborts;
+	uint32_t			firm_request_len;
+	uint32_t			firm_numbers_queue;
+	uint32_t			firm_sdram_size;
+	uint32_t			firm_hd_channels;
+	char				firm_model[12];
+	char				firm_version[20];
+};/* HW_DEVICE_EXTENSION */
+/*
+*******************************************************************************
+**                   Command Control Block
+**             this CCB length must be 32 bytes boundary
+*******************************************************************************
+*/
+struct CommandControlBlock
+{
+	struct ARCMSR_CDB		arcmsr_cdb;
+	/*
+	** 0-503 (size of CDB=504):
+	** arcmsr messenger scsi command descriptor size 504 bytes
+	*/
+	uint32_t			cdb_shifted_phyaddr;
+	/* 504-507 */
+	uint32_t			reserved1;
+	/* 508-511 */
+#if BITS_PER_LONG == 64
+	/*  ======================512+64 bytes========================  */
+	struct list_head		list;
+	/* 512-527 16 bytes next/prev ptrs for ccb lists */
+	struct scsi_cmnd *		pcmd;
+	/* 528-535 8 bytes pointer of linux scsi command */
+	struct AdapterControlBlock *	acb;
+	/* 536-543 8 bytes pointer of acb */
+
+	uint16_t			ccb_flags;
+	/* 544-545 */
+	#define		CCB_FLAG_READ			0x0000
+	#define		CCB_FLAG_WRITE			0x0001
+	#define		CCB_FLAG_ERROR			0x0002
+	#define		CCB_FLAG_FLUSHCACHE		0x0004
+	#define		CCB_FLAG_MASTER_ABORTED		0x0008
+	uint16_t			startdone;
+	/* 546-547 */
+	#define		ARCMSR_CCB_DONE			0x0000
+	#define		ARCMSR_CCB_START		0x55AA
+	#define		ARCMSR_CCB_ABORTED		0xAA55
+	#define		ARCMSR_CCB_ILLEGAL		0xFFFF
+	uint32_t			reserved2[7];
+	/* 548-551 552-555 556-559 560-563 564-567 568-571 572-575 */
+#else
+	/*  ======================512+32 bytes========================  */
+	struct list_head		list;
+	/* 512-519 8 bytes next/prev ptrs for ccb lists */
+	struct scsi_cmnd *		pcmd;
+	/* 520-523 4 bytes pointer of linux scsi command */
+	struct AdapterControlBlock *	acb;
+	/* 524-527 4 bytes pointer of acb */
+
+	uint16_t			ccb_flags;
+	/* 528-529 */
+	#define		CCB_FLAG_READ			0x0000
+	#define		CCB_FLAG_WRITE			0x0001
+	#define		CCB_FLAG_ERROR			0x0002
+	#define		CCB_FLAG_FLUSHCACHE		0x0004
+	#define		CCB_FLAG_MASTER_ABORTED		0x0008
+	uint16_t			startdone;
+	/* 530-531 */
+	#define		ARCMSR_CCB_DONE			0x0000
+	#define		ARCMSR_CCB_START		0x55AA
+	#define		ARCMSR_CCB_ABORTED		0xAA55
+	#define		ARCMSR_CCB_ILLEGAL		0xFFFF
+	uint32_t			reserved2[3];
+	/* 532-535 536-539 540-543 */
+#endif
+	/*  ==========================================================  */
+};
+/*
+*******************************************************************************
+**    ARECA SCSI sense data
+*******************************************************************************
+*/
+struct SENSE_DATA
+{
+	uint8_t				ErrorCode:7;
+#define SCSI_SENSE_CURRENT_ERRORS	0x70
+#define SCSI_SENSE_DEFERRED_ERRORS	0x71
+	uint8_t				Valid:1;
+	uint8_t				SegmentNumber;
+	uint8_t				SenseKey:4;
+	uint8_t				Reserved:1;
+	uint8_t				IncorrectLength:1;
+	uint8_t				EndOfMedia:1;
+	uint8_t				FileMark:1;
+	uint8_t				Information[4];
+	uint8_t				AdditionalSenseLength;
+	uint8_t				CommandSpecificInformation[4];
+	uint8_t				AdditionalSenseCode;
+	uint8_t				AdditionalSenseCodeQualifier;
+	uint8_t				FieldReplaceableUnitCode;
+	uint8_t				SenseKeySpecific[3];
+};
+/*
+*******************************************************************************
+**  Outbound Interrupt Status Register - OISR
+*******************************************************************************
+*/
+#define     ARCMSR_MU_OUTBOUND_INTERRUPT_STATUS_REG                 0x30
+#define     ARCMSR_MU_OUTBOUND_PCI_INT                              0x10
+#define     ARCMSR_MU_OUTBOUND_POSTQUEUE_INT                        0x08
+#define     ARCMSR_MU_OUTBOUND_DOORBELL_INT                         0x04
+#define     ARCMSR_MU_OUTBOUND_MESSAGE1_INT                         0x02
+#define     ARCMSR_MU_OUTBOUND_MESSAGE0_INT                         0x01
+#define     ARCMSR_MU_OUTBOUND_HANDLE_INT                 \
+                    (ARCMSR_MU_OUTBOUND_MESSAGE0_INT      \
+                     |ARCMSR_MU_OUTBOUND_MESSAGE1_INT     \
+                     |ARCMSR_MU_OUTBOUND_DOORBELL_INT     \
+                     |ARCMSR_MU_OUTBOUND_POSTQUEUE_INT    \
+                     |ARCMSR_MU_OUTBOUND_PCI_INT)
+/*
+*******************************************************************************
+**  Outbound Interrupt Mask Register - OIMR
+*******************************************************************************
+*/
+#define     ARCMSR_MU_OUTBOUND_INTERRUPT_MASK_REG                   0x34
+#define     ARCMSR_MU_OUTBOUND_PCI_INTMASKENABLE                    0x10
+#define     ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE              0x08
+#define     ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE               0x04
+#define     ARCMSR_MU_OUTBOUND_MESSAGE1_INTMASKENABLE               0x02
+#define     ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE               0x01
+#define     ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE                    0x1F
+
+extern void arcmsr_post_Qbuffer(struct AdapterControlBlock *acb);
+extern struct class_device_attribute *arcmsr_host_attrs[];
+extern int arcmsr_alloc_sysfs_attr(struct AdapterControlBlock *acb);
+void arcmsr_free_sysfs_attr(struct AdapterControlBlock *acb);
+
diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c
new file mode 100644
index 000000000000..0459f4194d7c
--- /dev/null
+++ b/drivers/scsi/arcmsr/arcmsr_attr.c
@@ -0,0 +1,392 @@
+/*
+*******************************************************************************
+**        O.S   : Linux
+**   FILE NAME  : arcmsr_attr.c
+**        BY    : Erich Chen
+**   Description: attributes exported to sysfs and device host
+*******************************************************************************
+** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved
+**
+**     Web site: www.areca.com.tw
+**       E-mail: erich@areca.com.tw
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License version 2 as
+** published by the Free Software Foundation.
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU General Public License for more details.
+*******************************************************************************
+** Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions
+** are met:
+** 1. Redistributions of source code must retain the above copyright
+**    notice, this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright
+**    notice, this list of conditions and the following disclaimer in the
+**    documentation and/or other materials provided with the distribution.
+** 3. The name of the author may not be used to endorse or promote products
+**    derived from this software without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,BUT
+** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF
+** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************
+** For history of changes, see Documentation/scsi/ChangeLog.arcmsr
+**     Firmware Specification, see Documentation/scsi/arcmsr_spec.txt
+*******************************************************************************
+*/
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include "arcmsr.h"
+
+struct class_device_attribute *arcmsr_host_attrs[];
+
+static ssize_t
+arcmsr_sysfs_iop_message_read(struct kobject *kobj, char *buf, loff_t off,
+    size_t count)
+{
+	struct class_device *cdev = container_of(kobj,struct class_device,kobj);
+	struct Scsi_Host *host = class_to_shost(cdev);
+	struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+	struct MessageUnit __iomem *reg = acb->pmu;
+	uint8_t *pQbuffer,*ptmpQbuffer;
+	int32_t allxfer_len = 0;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	/* do message unit read. */
+	ptmpQbuffer = (uint8_t *)buf;
+	while ((acb->rqbuf_firstindex != acb->rqbuf_lastindex)
+		&& (allxfer_len < 1031)) {
+		pQbuffer = &acb->rqbuffer[acb->rqbuf_firstindex];
+		memcpy(ptmpQbuffer, pQbuffer, 1);
+		acb->rqbuf_firstindex++;
+		acb->rqbuf_firstindex %= ARCMSR_MAX_QBUFFER;
+		ptmpQbuffer++;
+		allxfer_len++;
+	}
+	if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+		struct QBUFFER __iomem * prbuffer = (struct QBUFFER __iomem *)
+					&reg->message_rbuffer;
+		uint8_t __iomem * iop_data = (uint8_t __iomem *)prbuffer->data;
+		int32_t iop_len;
+
+		acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+		iop_len = readl(&prbuffer->data_len);
+		while (iop_len > 0) {
+			acb->rqbuffer[acb->rqbuf_lastindex] = readb(iop_data);
+			acb->rqbuf_lastindex++;
+			acb->rqbuf_lastindex %= ARCMSR_MAX_QBUFFER;
+			iop_data++;
+			iop_len--;
+		}
+		writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK,
+				&reg->inbound_doorbell);
+	}
+	return (allxfer_len);
+}
+
+static ssize_t
+arcmsr_sysfs_iop_message_write(struct kobject *kobj, char *buf, loff_t off,
+    size_t count)
+{
+	struct class_device *cdev = container_of(kobj,struct class_device,kobj);
+	struct Scsi_Host *host = class_to_shost(cdev);
+	struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+	int32_t my_empty_len, user_len, wqbuf_firstindex, wqbuf_lastindex;
+	uint8_t *pQbuffer, *ptmpuserbuffer;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+	if (count > 1032)
+		return -EINVAL;
+	/* do message unit write. */
+	ptmpuserbuffer = (uint8_t *)buf;
+	user_len = (int32_t)count;
+	wqbuf_lastindex = acb->wqbuf_lastindex;
+	wqbuf_firstindex = acb->wqbuf_firstindex;
+	if (wqbuf_lastindex != wqbuf_firstindex) {
+		arcmsr_post_Qbuffer(acb);
+		return 0;	/*need retry*/
+	} else {
+		my_empty_len = (wqbuf_firstindex-wqbuf_lastindex - 1)
+				&(ARCMSR_MAX_QBUFFER - 1);
+		if (my_empty_len >= user_len) {
+			while (user_len > 0) {
+				pQbuffer =
+				&acb->wqbuffer[acb->wqbuf_lastindex];
+				memcpy(pQbuffer, ptmpuserbuffer, 1);
+				acb->wqbuf_lastindex++;
+				acb->wqbuf_lastindex %= ARCMSR_MAX_QBUFFER;
+				ptmpuserbuffer++;
+				user_len--;
+			}
+			if (acb->acb_flags & ACB_F_MESSAGE_WQBUFFER_CLEARED) {
+				acb->acb_flags &=
+					~ACB_F_MESSAGE_WQBUFFER_CLEARED;
+				arcmsr_post_Qbuffer(acb);
+			}
+			return count;
+		} else {
+			return 0;	/*need retry*/
+		}
+	}
+}
+
+static ssize_t
+arcmsr_sysfs_iop_message_clear(struct kobject *kobj, char *buf, loff_t off,
+    size_t count)
+{
+	struct class_device *cdev = container_of(kobj,struct class_device,kobj);
+	struct Scsi_Host *host = class_to_shost(cdev);
+	struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+	struct MessageUnit __iomem *reg = acb->pmu;
+	uint8_t *pQbuffer;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+		acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+		writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK
+				, &reg->inbound_doorbell);
+	}
+	acb->acb_flags |=
+		(ACB_F_MESSAGE_WQBUFFER_CLEARED
+		| ACB_F_MESSAGE_RQBUFFER_CLEARED
+		| ACB_F_MESSAGE_WQBUFFER_READED);
+	acb->rqbuf_firstindex = 0;
+	acb->rqbuf_lastindex = 0;
+	acb->wqbuf_firstindex = 0;
+	acb->wqbuf_lastindex = 0;
+	pQbuffer = acb->rqbuffer;
+	memset(pQbuffer, 0, sizeof (struct QBUFFER));
+	pQbuffer = acb->wqbuffer;
+	memset(pQbuffer, 0, sizeof (struct QBUFFER));
+	return 1;
+}
+
+static struct bin_attribute arcmsr_sysfs_message_read_attr = {
+	.attr = {
+		.name = "mu_read",
+		.mode = S_IRUSR ,
+		.owner = THIS_MODULE,
+	},
+	.size = 1032,
+	.read = arcmsr_sysfs_iop_message_read,
+};
+
+static struct bin_attribute arcmsr_sysfs_message_write_attr = {
+	.attr = {
+		.name = "mu_write",
+		.mode = S_IWUSR,
+		.owner = THIS_MODULE,
+	},
+	.size = 1032,
+	.write = arcmsr_sysfs_iop_message_write,
+};
+
+static struct bin_attribute arcmsr_sysfs_message_clear_attr = {
+	.attr = {
+		.name = "mu_clear",
+		.mode = S_IWUSR,
+		.owner = THIS_MODULE,
+	},
+	.size = 1,
+	.write = arcmsr_sysfs_iop_message_clear,
+};
+
+int arcmsr_alloc_sysfs_attr(struct AdapterControlBlock *acb)
+{
+	struct Scsi_Host *host = acb->host;
+	int error;
+
+	error = sysfs_create_bin_file(&host->shost_classdev.kobj,
+				&arcmsr_sysfs_message_read_attr);
+	if (error) {
+		printk(KERN_ERR "arcmsr: alloc sysfs mu_read failed\n");
+		goto error_bin_file_message_read;
+	}
+	error = sysfs_create_bin_file(&host->shost_classdev.kobj,
+				&arcmsr_sysfs_message_write_attr);
+	if (error) {
+		printk(KERN_ERR "arcmsr: alloc sysfs mu_write failed\n");
+		goto error_bin_file_message_write;
+	}
+	error = sysfs_create_bin_file(&host->shost_classdev.kobj,
+				&arcmsr_sysfs_message_clear_attr);
+	if (error) {
+		printk(KERN_ERR "arcmsr: alloc sysfs mu_clear failed\n");
+		goto error_bin_file_message_clear;
+	}
+	return 0;
+error_bin_file_message_clear:
+	error = sysfs_remove_bin_file(&host->shost_classdev.kobj,
+				&arcmsr_sysfs_message_write_attr);
+	if (error)
+		printk(KERN_ERR "arcmsr: sysfs_remove_bin_file mu_write failed\n");
+error_bin_file_message_write:
+	error = sysfs_remove_bin_file(&host->shost_classdev.kobj,
+				&arcmsr_sysfs_message_read_attr);
+	if (error)
+		printk(KERN_ERR "arcmsr: sysfs_remove_bin_file mu_read failed\n");
+error_bin_file_message_read:
+	return error;
+}
+
+void
+arcmsr_free_sysfs_attr(struct AdapterControlBlock *acb) {
+	struct Scsi_Host *host = acb->host;
+	int error;
+
+	error = sysfs_remove_bin_file(&host->shost_classdev.kobj,
+				&arcmsr_sysfs_message_clear_attr);
+	if (error)
+		printk(KERN_ERR "arcmsr: free sysfs mu_clear failed\n");
+	error = sysfs_remove_bin_file(&host->shost_classdev.kobj,
+				&arcmsr_sysfs_message_write_attr);
+	if (error)
+		printk(KERN_ERR "arcmsr: free sysfs mu_write failed\n");
+	error = sysfs_remove_bin_file(&host->shost_classdev.kobj,
+				&arcmsr_sysfs_message_read_attr);
+	if (error)
+		printk(KERN_ERR "arcmsr: free sysfss mu_read failed\n");
+}
+
+
+static ssize_t
+arcmsr_attr_host_driver_version(struct class_device *cdev, char *buf) {
+	return snprintf(buf, PAGE_SIZE,
+			"ARCMSR: %s\n",
+			ARCMSR_DRIVER_VERSION);
+}
+
+static ssize_t
+arcmsr_attr_host_driver_posted_cmd(struct class_device *cdev, char *buf) {
+	struct Scsi_Host *host = class_to_shost(cdev);
+	struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+	return snprintf(buf, PAGE_SIZE,
+			"Current commands posted:     %4d\n",
+			atomic_read(&acb->ccboutstandingcount));
+}
+
+static ssize_t
+arcmsr_attr_host_driver_reset(struct class_device *cdev, char *buf) {
+	struct Scsi_Host *host = class_to_shost(cdev);
+	struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+	return snprintf(buf, PAGE_SIZE,
+			"SCSI Host Resets:            %4d\n",
+			acb->num_resets);
+}
+
+static ssize_t
+arcmsr_attr_host_driver_abort(struct class_device *cdev, char *buf) {
+	struct Scsi_Host *host = class_to_shost(cdev);
+	struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+	return snprintf(buf, PAGE_SIZE,
+			"SCSI Aborts/Timeouts:        %4d\n",
+			acb->num_aborts);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_model(struct class_device *cdev, char *buf) {
+    struct Scsi_Host *host = class_to_shost(cdev);
+	struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+	return snprintf(buf, PAGE_SIZE,
+			"Adapter Model: %s\n",
+			acb->firm_model);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_version(struct class_device *cdev, char *buf) {
+	struct Scsi_Host *host = class_to_shost(cdev);
+	struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+	return snprintf(buf, PAGE_SIZE,
+			"Firmware Version:  %s\n",
+			acb->firm_version);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_request_len(struct class_device *cdev, char *buf) {
+	struct Scsi_Host *host = class_to_shost(cdev);
+	struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+	return snprintf(buf, PAGE_SIZE,
+			"Reguest Lenth: %4d\n",
+			acb->firm_request_len);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_numbers_queue(struct class_device *cdev, char *buf) {
+	struct Scsi_Host *host = class_to_shost(cdev);
+	struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+	return snprintf(buf, PAGE_SIZE,
+			"Numbers of Queue: %4d\n",
+			acb->firm_numbers_queue);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_sdram_size(struct class_device *cdev, char *buf) {
+	struct Scsi_Host *host = class_to_shost(cdev);
+	struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+	return snprintf(buf, PAGE_SIZE,
+			"SDRAM Size: %4d\n",
+			acb->firm_sdram_size);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_hd_channels(struct class_device *cdev, char *buf) {
+	struct Scsi_Host *host = class_to_shost(cdev);
+	struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+	return snprintf(buf, PAGE_SIZE,
+			"Hard Disk Channels: %4d\n",
+			acb->firm_hd_channels);
+}
+
+static CLASS_DEVICE_ATTR(host_driver_version, S_IRUGO, arcmsr_attr_host_driver_version, NULL);
+static CLASS_DEVICE_ATTR(host_driver_posted_cmd, S_IRUGO, arcmsr_attr_host_driver_posted_cmd, NULL);
+static CLASS_DEVICE_ATTR(host_driver_reset, S_IRUGO, arcmsr_attr_host_driver_reset, NULL);
+static CLASS_DEVICE_ATTR(host_driver_abort, S_IRUGO, arcmsr_attr_host_driver_abort, NULL);
+static CLASS_DEVICE_ATTR(host_fw_model, S_IRUGO, arcmsr_attr_host_fw_model, NULL);
+static CLASS_DEVICE_ATTR(host_fw_version, S_IRUGO, arcmsr_attr_host_fw_version, NULL);
+static CLASS_DEVICE_ATTR(host_fw_request_len, S_IRUGO, arcmsr_attr_host_fw_request_len, NULL);
+static CLASS_DEVICE_ATTR(host_fw_numbers_queue, S_IRUGO, arcmsr_attr_host_fw_numbers_queue, NULL);
+static CLASS_DEVICE_ATTR(host_fw_sdram_size, S_IRUGO, arcmsr_attr_host_fw_sdram_size, NULL);
+static CLASS_DEVICE_ATTR(host_fw_hd_channels, S_IRUGO, arcmsr_attr_host_fw_hd_channels, NULL);
+
+struct class_device_attribute *arcmsr_host_attrs[] = {
+	&class_device_attr_host_driver_version,
+	&class_device_attr_host_driver_posted_cmd,
+	&class_device_attr_host_driver_reset,
+	&class_device_attr_host_driver_abort,
+	&class_device_attr_host_fw_model,
+	&class_device_attr_host_fw_version,
+	&class_device_attr_host_fw_request_len,
+	&class_device_attr_host_fw_numbers_queue,
+	&class_device_attr_host_fw_sdram_size,
+	&class_device_attr_host_fw_hd_channels,
+	NULL,
+};
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
new file mode 100644
index 000000000000..475f978ff8f0
--- /dev/null
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -0,0 +1,1496 @@
+/*
+*******************************************************************************
+**        O.S   : Linux
+**   FILE NAME  : arcmsr_hba.c
+**        BY    : Erich Chen
+**   Description: SCSI RAID Device Driver for
+**                ARECA RAID Host adapter
+*******************************************************************************
+** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved
+**
+**     Web site: www.areca.com.tw
+**       E-mail: erich@areca.com.tw
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License version 2 as
+** published by the Free Software Foundation.
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU General Public License for more details.
+*******************************************************************************
+** Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions
+** are met:
+** 1. Redistributions of source code must retain the above copyright
+**    notice, this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright
+**    notice, this list of conditions and the following disclaimer in the
+**    documentation and/or other materials provided with the distribution.
+** 3. The name of the author may not be used to endorse or promote products
+**    derived from this software without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,BUT
+** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF