Merge tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "A new driver this cycle is making the bulk of the changes and the
  rx8010 driver has been rework to use the modern APIs.

  Summary:

  Subsystem:
   - new generic DT properties: aux-voltage-chargeable,
     trickle-voltage-millivolt

  New driver:
   - Microcrystal RV-3032

  Drivers:
   - ds1307: use aux-voltage-chargeable
   - r9701, rx8010: modernization of the driver
   - rv3028: fix clock output, trickle resistor values, RAM
     configuration registers"

* tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
  rtc: r9701: set range
  rtc: r9701: convert to devm_rtc_allocate_device
  rtc: r9701: stop setting RWKCNT
  rtc: r9701: remove useless memset
  rtc: r9701: stop setting a default time
  rtc: r9701: remove leftover comment
  rtc: rv3032: Add a driver for Microcrystal RV-3032
  dt-bindings: rtc: rv3032: add RV-3032 bindings
  dt-bindings: rtc: add trickle-voltage-millivolt
  rtc: rv3028: ensure ram configuration registers are saved
  rtc: rv3028: factorize EERD bit handling
  rtc: rv3028: fix trickle resistor values
  rtc: rv3028: fix clock output support
  rtc: mt6397: Remove unused member dev
  rtc: rv8803: simplify the return expression of rv8803_nvram_write
  rtc: meson: simplify the return expression of meson_vrtc_probe
  rtc: rx8010: rename rx8010_init_client() to rx8010_init()
  rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally
  rtc: ds1307: consider aux-voltage-chargeable
  rtc: ds1307: store previous charge default per chip
  ...

17 files changed, 1315 insertions, 366 deletions

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 48c536acd777..65ad9d0b47ab 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -669,6 +669,16 @@ config RTC_DRV_RV3028
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-rv3028.
 
+config RTC_DRV_RV3032
+	tristate "Micro Crystal RV3032"
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the Micro Crystal
+	  RV3032.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rv3032.
+
 config RTC_DRV_RV8803
 	tristate "Micro Crystal RV8803, Epson RX8900"
 	help
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 880e08a409c3..bfb57464118d 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -141,6 +141,7 @@ obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
 obj-$(CONFIG_RTC_DRV_RTD119X)	+= rtc-rtd119x.o
 obj-$(CONFIG_RTC_DRV_RV3028)	+= rtc-rv3028.o
 obj-$(CONFIG_RTC_DRV_RV3029C2)	+= rtc-rv3029c2.o
+obj-$(CONFIG_RTC_DRV_RV3032)	+= rtc-rv3032.o
 obj-$(CONFIG_RTC_DRV_RV8803)	+= rtc-rv8803.o
 obj-$(CONFIG_RTC_DRV_RX4581)	+= rtc-rx4581.o
 obj-$(CONFIG_RTC_DRV_RX6110)	+= rtc-rx6110.o
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index bcc96ab7793f..c633319cdb91 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -1006,6 +1006,7 @@ static int cmos_suspend(struct device *dev)
 			enable_irq_wake(cmos->irq);
 	}
 
+	memset(&cmos->saved_wkalrm, 0, sizeof(struct rtc_wkalrm));
 	cmos_read_alarm(dev, &cmos->saved_wkalrm);
 
 	dev_dbg(dev, "suspend%s, ctrl %02x\n",
@@ -1054,6 +1055,7 @@ static void cmos_check_wkalrm(struct device *dev)
 		return;
 	}
 
+	memset(&current_alarm, 0, sizeof(struct rtc_wkalrm));
 	cmos_read_alarm(dev, &current_alarm);
 	t_current_expires = rtc_tm_to_time64(&current_alarm.time);
 	t_saved_expires = rtc_tm_to_time64(&cmos->saved_wkalrm.time);
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 54c85cdd019d..9f5f54ca039d 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -122,6 +122,9 @@ enum ds_type {
 #define RX8130_REG_FLAG_AF		BIT(3)
 #define RX8130_REG_CONTROL0		0x1e
 #define RX8130_REG_CONTROL0_AIE		BIT(3)
+#define RX8130_REG_CONTROL1		0x1f
+#define RX8130_REG_CONTROL1_INIEN	BIT(4)
+#define RX8130_REG_CONTROL1_CHGEN	BIT(5)
 
 #define MCP794XX_REG_CONTROL		0x07
 #	define MCP794XX_BIT_ALM0_EN	0x10
@@ -153,6 +156,7 @@ enum ds_type {
 #define DS1388_REG_CONTROL		0x0c
 #	define DS1388_BIT_RST		BIT(0)
 #	define DS1388_BIT_WDE		BIT(1)
+#	define DS1388_BIT_nEOSC		BIT(7)
 
 /* negative offset step is -2.034ppm */
 #define M41TXX_NEG_OFFSET_STEP_PPB	2034
@@ -190,6 +194,15 @@ struct chip_desc {
 	u16			trickle_charger_reg;
 	u8			(*do_trickle_setup)(struct ds1307 *, u32,
 						    bool);
+	/* Does the RTC require trickle-resistor-ohms to select the value of
+	 * the resistor between Vcc and Vbackup?
+	 */
+	bool			requires_trickle_resistor;
+	/* Some RTC's batteries and supercaps were charged by default, others
+	 * allow charging but were not configured previously to do so.
+	 * Remember this behavior to stay backwards compatible.
+	 */
+	bool			charge_default;
 };
 
 static const struct chip_desc chips[last_ds_type];
@@ -352,6 +365,10 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
 		regmap_update_bits(ds1307->regmap, DS1340_REG_FLAG,
 				   DS1340_BIT_OSF, 0);
 		break;
+	case ds_1388:
+		regmap_update_bits(ds1307->regmap, DS1388_REG_FLAG,
+				   DS1388_BIT_OSF, 0);
+		break;
 	case mcp794xx:
 		/*
 		 * these bits were cleared when preparing the date/time
@@ -507,6 +524,8 @@ static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307, u32 ohms, bool diode)
 	u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
 		DS1307_TRICKLE_CHARGER_NO_DIODE;
 
+	setup |= DS13XX_TRICKLE_CHARGER_MAGIC;
+
 	switch (ohms) {
 	case 250:
 		setup |= DS1307_TRICKLE_CHARGER_250_OHM;
@@ -525,6 +544,16 @@ static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307, u32 ohms, bool diode)
 	return setup;
 }
 
+static u8 do_trickle_setup_rx8130(struct ds1307 *ds1307, u32 ohms, bool diode)
+{
+	/* make sure that the backup battery is enabled */
+	u8 setup = RX8130_REG_CONTROL1_INIEN;
+	if (diode)
+		setup |= RX8130_REG_CONTROL1_CHGEN;
+
+	return setup;
+}
+
 static irqreturn_t rx8130_irq(int irq, void *dev_id)
 {
 	struct ds1307           *ds1307 = dev_id;
@@ -979,6 +1008,8 @@ static const struct chip_desc chips[last_ds_type] = {
 		.bbsqi_bit	= DS1339_BIT_BBSQI,
 		.trickle_charger_reg = 0x10,
 		.do_trickle_setup = &do_trickle_setup_ds1339,
+		.requires_trickle_resistor = true,
+		.charge_default = true,
 	},
 	[ds_1340] = {
 		.century_reg	= DS1307_REG_HOUR,
@@ -986,6 +1017,8 @@ static const struct chip_desc chips[last_ds_type] = {
 		.century_bit	= DS1340_BIT_CENTURY,
 		.do_trickle_setup = &do_trickle_setup_ds1339,
 		.trickle_charger_reg = 0x08,
+		.requires_trickle_resistor = true,
+		.charge_default = true,
 	},
 	[ds_1341] = {
 		.century_reg	= DS1307_REG_MONTH,
@@ -1009,6 +1042,8 @@ static const struct chip_desc chips[last_ds_type] = {
 		.offset		= 0x10,
 		.irq_handler = rx8130_irq,
 		.rtc_ops = &rx8130_rtc_ops,
+		.trickle_charger_reg = RX8130_REG_CONTROL1,
+		.do_trickle_setup = &do_trickle_setup_rx8130,
 	},
 	[m41t0] = {
 		.rtc_ops	= &m41txx_rtc_ops,
@@ -1293,18 +1328,37 @@ static int ds1307_nvram_write(void *priv, unsigned int offset, void *val,
 static u8 ds1307_trickle_init(struct ds1307 *ds1307,
 			      const struct chip_desc *chip)
 {
-	u32 ohms;
-	bool diode = true;
+	u32 ohms, chargeable;
+	bool diode = chip->charge_default;
 
 	if (!chip->do_trickle_setup)
 		return 0;
 
 	if (device_property_read_u32(ds1307->dev, "trickle-resistor-ohms",
-				     &ohms))
+				     &ohms) && chip->requires_trickle_resistor)
 		return 0;
 
-	if (device_property_read_bool(ds1307->dev, "trickle-diode-disable"))
+	/* aux-voltage-chargeable takes precedence over the deprecated
+	 * trickle-diode-disable
+	 */
+	if (!device_property_read_u32(ds1307->dev, "aux-voltage-chargeable",
+				     &chargeable)) {
+		switch (chargeable) {
+		case 0:
+			diode = false;
+			break;
+		case 1:
+			diode = true;
+			break;
+		default:
+			dev_warn(ds1307->dev,
+				 "unsupported aux-voltage-chargeable value\n");
+			break;
+		}
+	} else if (device_property_read_bool(ds1307->dev,
+					     "trickle-diode-disable")) {
 		diode = false;
+	}
 
 	return chip->do_trickle_setup(ds1307, ohms, diode);
 }
@@ -1758,7 +1812,6 @@ static int ds1307_probe(struct i2c_client *client,
 		trickle_charger_setup = pdata->trickle_charger_setup;
 
 	if (trickle_charger_setup && chip->trickle_charger_reg) {
-		trickle_charger_setup |= DS13XX_TRICKLE_CHARGER_MAGIC;
 		dev_dbg(ds1307->dev,
 			"writing trickle charger info 0x%x to 0x%x\n",
 			trickle_charger_setup, chip->trickle_charger_reg);
@@ -1881,6 +1934,19 @@ static int ds1307_probe(struct i2c_client *client,
 				     DS1307_REG_HOUR << 4 | 0x08, hour);
 		}
 		break;
+	case ds_1388:
+		err = regmap_read(ds1307->regmap, DS1388_REG_CONTROL, &tmp);
+		if (err) {
+			dev_dbg(ds1307->dev, "read error %d\n", err);
+			goto exit;
+		}
+
+		/* oscillator off?  turn it on, so clock can tick. */
+		if (tmp & DS1388_BIT_nEOSC) {
+			tmp &= ~DS1388_BIT_nEOSC;
+			regmap_write(ds1307->regmap, DS1388_REG_CONTROL, tmp);
+		}
+		break;
 	default:
 		break;
 	}
diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c
index 56c670af2e50..dfbd7b88b2b9 100644
--- a/drivers/rtc/rtc-ds1685.c
+++ b/drivers/rtc/rtc-ds1685.c
@@ -193,12 +193,12 @@ ds1685_rtc_begin_data_access(struct ds1685_priv *rtc)
 	rtc->write(rtc, RTC_CTRL_B,
 		   (rtc->read(rtc, RTC_CTRL_B) | RTC_CTRL_B_SET));
 
+	/* Switch to Bank 1 */
+	ds1685_rtc_switch_to_bank1(rtc);
+
 	/* Read Ext Ctrl 4A and check the INCR bit to avoid a lockout. */
 	while (rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_INCR)
 		cpu_relax();
-
-	/* Switch to Bank 1 */
-	ds1685_rtc_switch_to_bank1(rtc);
 }
 
 /**
@@ -213,7 +213,7 @@ static inline void
 ds1685_rtc_end_data_access(struct ds1685_priv *rtc)
 {
 	/* Switch back to Bank 0 */
-	ds1685_rtc_switch_to_bank1(rtc);
+	ds1685_rtc_switch_to_bank0(rtc);
 
 	/* Clear the SET bit in Ctrl B */
 	rtc->write(rtc, RTC_CTRL_B,
diff --git a/drivers/rtc/rtc-fsl-ftm-alarm.c b/drivers/rtc/rtc-fsl-ftm-alarm.c
index 68f0a1801a2e..48d3b38ea348 100644
--- a/drivers/rtc/rtc-fsl-ftm-alarm.c
+++ b/drivers/rtc/rtc-fsl-ftm-alarm.c
@@ -3,7 +3,7 @@
  * Freescale FlexTimer Module (FTM) alarm device driver.
  *
  * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2019 NXP
+ * Copyright 2019-2020 NXP
  *
  */
 
@@ -312,7 +312,7 @@ static const struct of_device_id ftm_rtc_match[] = {
 };
 
 static const struct acpi_device_id ftm_imx_acpi_ids[] = {
-	{"NXP0011",},
+	{"NXP0014",},
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, ftm_imx_acpi_ids);
diff --git a/drivers/rtc/rtc-meson-vrtc.c b/drivers/rtc/rtc-meson-vrtc.c
index 89e5ba0dae69..e6bd0808a092 100644
--- a/drivers/rtc/rtc-meson-vrtc.c
+++ b/drivers/rtc/rtc-meson-vrtc.c
@@ -65,7 +65,6 @@ static const struct rtc_class_ops meson_vrtc_ops = {
 static int meson_vrtc_probe(struct platform_device *pdev)
 {
 	struct meson_vrtc_data *vrtc;
-	int ret;
 
 	vrtc = devm_kzalloc(&pdev->dev, sizeof(*vrtc), GFP_KERNEL);
 	if (!vrtc)
@@ -84,11 +83,7 @@ static int meson_vrtc_probe(struct platform_device *pdev)
 		return PTR_ERR(vrtc->rtc);
 
 	vrtc->rtc->ops = &meson_vrtc_ops;
-	ret = rtc_register_device(vrtc->rtc);
-	if (ret)
-		return ret;
-
-	return 0;
+	return rtc_register_device(vrtc->rtc);
 }
 
 static int __maybe_unused meson_vrtc_suspend(struct device *dev)
diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index f8b1353777ba..1894aded4c85 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -31,7 +31,8 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 					MTK_RTC_POLL_DELAY_US,
 					MTK_RTC_POLL_TIMEOUT);
 	if (ret < 0)
-		dev_err(rtc->dev, "failed to write WRTGE: %d\n", ret);
+		dev_err(rtc->rtc_dev->dev.parent,
+			"failed to write WRTGR: %d\n", ret);
 
 	return ret;
 }
diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index ed6316992cbb..07a5630ec841 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -559,7 +559,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
 	pcf2127->rtc->set_start_time = true; /* Sets actual start to 1970 */
 	pcf2127->rtc->uie_unsupported = 1;
 
-	if (alarm_irq >= 0) {
+	if (alarm_irq > 0) {
 		ret = devm_request_threaded_irq(dev, alarm_irq, NULL,
 						pcf2127_rtc_irq,
 						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
@@ -570,7 +570,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
 		}
 	}
 
-	if (alarm_irq >= 0 || device_property_read_bool(dev, "wakeup-source")) {
+	if (alarm_irq > 0 || device_property_read_bool(dev, "wakeup-source")) {
 		device_init_wakeup(dev, true);
 		pcf2127->rtc->ops = &pcf2127_rtc_alrm_ops;
 	}
diff --git a/drivers/rtc/rtc-r9701.c b/drivers/rtc/rtc-r9701.c
index 84f0d25259ae..7ceb968f0e44 100644
--- a/drivers/rtc/rtc-r9701.c
+++ b/drivers/rtc/rtc-r9701.c
@@ -75,8 +75,6 @@ static int r9701_get_datetime(struct device *dev, struct rtc_time *dt)
 	if (ret)
 		return ret;
 
-	memset(dt, 0, sizeof(*dt));
-
 	dt->tm_sec = bcd2bin(buf[0]); /* RSECCNT */
 	dt->tm_min = bcd2bin(buf[1]); /* RMINCNT */
 	dt->tm_hour = bcd2bin(buf[2]); /* RHRCNT */
@@ -85,20 +83,12 @@ static int r9701_get_datetime(struct device *dev, struct rtc_time *dt)
 	dt->tm_mon = bcd2bin(buf[4]) - 1; /* RMONCNT */
 	dt->tm_year = bcd2bin(buf[5]) + 100; /* RYRCNT */
 
-	/* the rtc device may contain illegal values on power up
-	 * according to the data sheet. make sure they are valid.
-	 */
-
 	return 0;
 }
 
 static int r9701_set_datetime(struct device *dev, struct rtc_time *dt)
 {
-	int ret, year;
-
-	year = dt->tm_year + 1900;
-	if (year >= 2100 || year < 2000)
-		return -EINVAL;
+	int ret;
 
 	ret = write_reg(dev, RHRCNT, bin2bcd(dt->tm_hour));
 	ret = ret ? ret : write_reg(dev, RMINCNT, bin2bcd(dt->tm_min));
@@ -106,7 +96,6 @@ static int r9701_set_datetime(struct device *dev, struct rtc_time *dt)
 	ret = ret ? ret : write_reg(dev, RDAYCNT, bin2bcd(dt->tm_mday));
 	ret = ret ? ret : write_reg(dev, RMONCNT, bin2bcd(dt->tm_mon + 1));
 	ret = ret ? ret : write_reg(dev, RYRCNT, bin2bcd(dt->tm_year - 100));
-	ret = ret ? ret : write_reg(dev, RWKCNT, 1 << dt->tm_wday);
 
 	return ret;
 }
@@ -119,7 +108,6 @@ static const struct rtc_class_ops r9701_rtc_ops = {
 static int r9701_probe(struct spi_device *spi)
 {
 	struct rtc_device *rtc;
-	struct rtc_time dt;
 	unsigned char tmp;
 	int res;
 
@@ -130,35 +118,16 @@ static int r9701_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
-	/*
-	 * The device seems to be present. Now check if the registers
-	 * contain invalid values. If so, try to write a default date:
-	 * 2000/1/1 00:00:00
-	 */
-	if (r9701_get_datetime(&spi->dev, &dt)) {
-		dev_info(&spi->dev, "trying to repair invalid date/time\n");
-		dt.tm_sec  = 0;
-		dt.tm_min  = 0;
-		dt.tm_hour = 0;
-		dt.tm_mday = 1;
-		dt.tm_mon  = 0;
-		dt.tm_year = 100;
-
-		if (r9701_set_datetime(&spi->dev, &dt) ||
-				r9701_get_datetime(&spi->dev, &dt)) {
-			dev_err(&spi->dev, "cannot repair RTC register\n");
-			return -ENODEV;
-		}
-	}
-
-	rtc = devm_rtc_device_register(&spi->dev, "r9701",
-				&r9701_rtc_ops, THIS_MODULE);
+	rtc = devm_rtc_allocate_device(&spi->dev);
 	if (IS_ERR(rtc))
 		return PTR_ERR(rtc);
 
 	spi_set_drvdata(spi, rtc);
+	rtc->ops = &r9701_rtc_ops;
+	rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	rtc->range_max = RTC_TIMESTAMP_END_2099;
 
-	return 0;
+	return rtc_register_device(rtc);
 }
 
 static struct spi_driver r9701_driver = {
diff --git a/drivers/rtc/rtc-rs5c313.c b/drivers/rtc/rtc-rs5c313.c
index 89f38e3e917d..e98f85f34206 100644
--- a/drivers/rtc/rtc-rs5c313.c
+++ b/drivers/rtc/rtc-rs5c313.c
@@ -366,15 +366,15 @@ static const struct rtc_class_ops rs5c313_rtc_ops = {
 
 static int rs5c313_rtc_probe(struct platform_device *pdev)
 {
-	struct rtc_device *rtc = devm_rtc_device_register(&pdev->dev, "rs5c313",
-				&rs5c313_rtc_ops, THIS_MODULE);
+	struct rtc_device *rtc;
 
-	if (IS_ERR(rtc))
-		return PTR_ERR(rtc);
+	rs5c313_init_port();
+	rs5c313_check_xstp_bit();
 
-	platform_set_drvdata(pdev, rtc);
+	rtc = devm_rtc_device_register(&pdev->dev, "rs5c313", &rs5c313_rtc_ops,
+				       THIS_MODULE);
 
-	return 0;
+	return PTR_ERR_OR_ZERO(rtc);
 }
 
 static struct platform_driver rs5c313_rtc_platform_driver = {
@@ -384,27 +384,7 @@ static struct platform_driver rs5c313_rtc_platform_driver = {
 	.probe	= rs5c313_rtc_probe,
 };
 
-static int __init rs5c313_rtc_init(void)
-{
-	int err;
-
-	err = platform_driver_register(&rs5c313_rtc_platform_driver);
-	if (err)
-		return err;
-
-	rs5c313_init_port();
-	rs5c313_check_xstp_bit();
-
-	return 0;
-}
-
-static void __exit rs5c313_rtc_exit(void)
-{
-	platform_driver_unregister(&rs5c313_rtc_platform_driver);
-}
-
-module_init(rs5c313_rtc_init);
-module_exit(rs5c313_rtc_exit);
+module_platform_driver(rs5c313_rtc_platform_driver);
 
 MODULE_AUTHOR("kogiidena , Nobuhiro Iwamatsu <iwamatsu@nigauri.org>");
 MODULE_DESCRIPTION("Ricoh RS5C313 RTC device driver");
diff --git a/drivers/rtc/rtc-rv3028.c b/drivers/rtc/rtc-rv3028.c
index ec84db0b3d7a..fa226f0fe67d 100644
--- a/drivers/rtc/rtc-rv3028.c
+++ b/drivers/rtc/rtc-rv3028.c
@@ -71,6 +71,7 @@
 
 #define RV3028_EVT_CTRL_TSR		BIT(2)
 
+#define RV3028_EEPROM_CMD_UPDATE	0x11
 #define RV3028_EEPROM_CMD_WRITE		0x21
 #define RV3028_EEPROM_CMD_READ		0x22
 
@@ -95,7 +96,7 @@ struct rv3028_data {
 #endif
 };
 
-static u16 rv3028_trickle_resistors[] = {1000, 3000, 6000, 11000};
+static u16 rv3028_trickle_resistors[] = {3000, 5000, 9000, 15000};
 
 static ssize_t timestamp0_store(struct device *dev,
 				struct device_attribute *attr,
@@ -171,6 +172,88 @@ static const struct attribute_group rv3028_attr_group = {
 	.attrs	= rv3028_attrs,
 };
 
+static int rv3028_exit_eerd(struct rv3028_data *rv3028, u32 eerd)
+{
+	if (eerd)
+		return 0;
+
+	return regmap_update_bits(rv3028->regmap, RV3028_CTRL1, RV3028_CTRL1_EERD, 0);
+}
+
+static int rv3028_enter_eerd(struct rv3028_data *rv3028, u32 *eerd)
+{
+	u32 ctrl1, status;
+	int ret;
+
+	ret = regmap_read(rv3028->regmap, RV3028_CTRL1, &ctrl1);
+	if (ret)
+		return ret;
+
+	*eerd = ctrl1 & RV3028_CTRL1_EERD;
+	if (*eerd)
+		return 0;
+
+	ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL1,
+				 RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
+	if (ret)
+		return ret;
+
+	ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
+				       !(status & RV3028_STATUS_EEBUSY),
+				       RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
+	if (ret) {
+		rv3028_exit_eerd(rv3028, *eerd);
+
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rv3028_update_eeprom(struct rv3028_data *rv3028, u32 eerd)
+{
+	u32 status;
+	int ret;
+
+	ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0);
+	if (ret)
+		goto exit_eerd;
+
+	ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, RV3028_EEPROM_CMD_UPDATE);
+	if (ret)
+		goto exit_eerd;
+
+	usleep_range(63000, RV3028_EEBUSY_TIMEOUT);
+
+	ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
+				       !(status & RV3028_STATUS_EEBUSY),
+				       RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
+
+exit_eerd:
+	rv3028_exit_eerd(rv3028, eerd);
+
+	return ret;
+}
+
+static int rv3028_update_cfg(struct rv3028_data *rv3028, unsigned int reg,
+			     unsigned int mask, unsigned int val)
+{
+	u32 eerd;
+	int ret;
+
+	ret = rv3028_enter_eerd(rv3028, &eerd);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(rv3028->regmap, reg, mask, val);
+	if (ret) {
+		rv3028_exit_eerd(rv3028, eerd);
+		return ret;
+	}
+
+	return rv3028_update_eeprom(rv3028, eerd);
+}
+
 static irqreturn_t rv3028_handle_irq(int irq, void *dev_id)
 {
 	struct rv3028_data *rv3028 = dev_id;
@@ -404,17 +487,32 @@ static int rv3028_read_offset(struct device *dev, long *offset)
 static int rv3028_set_offset(struct device *dev, long offset)
 {
 	struct rv3028_data *rv3028 = dev_get_drvdata(dev);
+	u32 eerd;
 	int ret;
 
 	offset = clamp(offset, -244141L, 243187L) * 1000;
 	offset = DIV_ROUND_CLOSEST(offset, OFFSET_STEP_PPT);
 
+	ret = rv3028_enter_eerd(rv3028, &eerd);
+	if (ret)
+		return ret;
+
 	ret = regmap_write(rv3028->regmap, RV3028_OFFSET, offset >> 1);
 	if (ret < 0)
-		return ret;
+		goto exit_eerd;
+
+	ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP, BIT(7),
+				 offset << 7);
+	if (ret < 0)
+		goto exit_eerd;
+
+	return rv3028_update_eeprom(rv3028, eerd);
+
+exit_eerd:
+	rv3028_exit_eerd(rv3028, eerd);
+
+	return ret;
 
-	return regmap_update_bits(rv3028->regmap, RV3028_BACKUP, BIT(7),
-				  offset << 7);
 }
 
 static int rv3028_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
@@ -451,49 +549,36 @@ static int rv3028_nvram_read(void *priv, unsigned int offset, void *val,
 static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val,
 			       size_t bytes)
 {
-	u32 status, ctrl1;
-	int i, ret, err;
+	struct rv3028_data *rv3028 = priv;
+	u32 status, eerd;
+	int i, ret;
 	u8 *buf = val;
 
-	ret = regmap_read(priv, RV3028_CTRL1, &ctrl1);
+	ret = rv3028_enter_eerd(rv3028, &eerd);
 	if (ret)
 		return ret;
 
-	if (!(ctrl1 & RV3028_CTRL1_EERD)) {
-		ret = regmap_update_bits(priv, RV3028_CTRL1,
-					 RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
-		if (ret)
-			return ret;
-
-		ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
-					       !(status & RV3028_STATUS_EEBUSY),
-					       RV3028_EEBUSY_POLL,
-					       RV3028_EEBUSY_TIMEOUT);
-		if (ret)
-			goto restore_eerd;
-	}
-
 	for (i = 0; i < bytes; i++) {
-		ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i);
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_ADDR, offset + i);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_write(priv, RV3028_EEPROM_DATA, buf[i]);
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_DATA, buf[i]);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0);
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_write(priv, RV3028_EEPROM_CMD,
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD,
 				   RV3028_EEPROM_CMD_WRITE);
 		if (ret)
 			goto restore_eerd;
 
 		usleep_range(RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
 
-		ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
+		ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
 					       !(status & RV3028_STATUS_EEBUSY),
 					       RV3028_EEBUSY_POLL,
 					       RV3028_EEBUSY_TIMEOUT);
@@ -502,13 +587,7 @@ static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val,
 	}
 
 restore_eerd:
-	if (!(ctrl1 & RV3028_CTRL1_EERD))
-	{
-		err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD,
-					 0);
-		if (err && !ret)
-			ret = err;
-	}
+	rv3028_exit_eerd(rv3028, eerd);
 
 	return ret;
 }
@@ -516,63 +595,44 @@ restore_eerd:
 static int rv3028_eeprom_read(void *priv, unsigned int offset, void *val,
 			      size_t bytes)
 {
-	u32 status, ctrl1, data;
-	int i, ret, err;
+	struct rv3028_data *rv3028 = priv;
+	u32 status, eerd, data;
+	int i, ret;
 	u8 *buf = val;
 
-	ret = regmap_read(priv, RV3028_CTRL1, &ctrl1);
+	ret = rv3028_enter_eerd(rv3028, &eerd);
 	if (ret)
 		return ret;
 
-	if (!(ctrl1 & RV3028_CTRL1_EERD)) {
-		ret = regmap_update_bits(priv, RV3028_CTRL1,
-					 RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
-		if (ret)
-			return ret;
-
-		ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
-					       !(status & RV3028_STATUS_EEBUSY),
-					       RV3028_EEBUSY_POLL,
-					       RV3028_EEBUSY_TIMEOUT);
-		if (ret)
-			goto restore_eerd;
-	}
-
 	for (i = 0; i < bytes; i++) {
-		ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i);
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_ADDR, offset + i);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0);
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_write(priv, RV3028_EEPROM_CMD,
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD,
 				   RV3028_EEPROM_CMD_READ);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
+		ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
 					       !(status & RV3028_STATUS_EEBUSY),
 					       RV3028_EEBUSY_POLL,
 					       RV3028_EEBUSY_TIMEOUT);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_read(priv, RV3028_EEPROM_DATA, &data);
+		ret = regmap_read(rv3028->regmap, RV3028_EEPROM_DATA, &data);
 		if (ret)
 			goto restore_eerd;
 		buf[i] = data;
 	}
 
 restore_eerd:
-	if (!(ctrl1 & RV3028_CTRL1_EERD))
-	{
-		err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD,
-					 0);
-		if (err && !ret)
-			ret = err;
-	}
+	rv3028_exit_eerd(rv3028, eerd);
 
 	return ret;
 }
@@ -619,24 +679,23 @@ static int rv3028_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 				  unsigned long parent_rate)
 {
 	int i, ret;
+	u32 enabled;
 	struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw);
 
+	ret = regmap_read(rv3028->regmap, RV3028_CLKOUT, &enabled);
+	if (ret < 0)
+		return ret;
+
 	ret = regmap_write(rv3028->regmap, RV3028_CLKOUT, 0x0);
 	if (ret < 0)
 		return ret;
 
-	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) {
-		if (clkout_rates[i] == rate) {
-			ret = regmap_update_bits(rv3028->regmap,
-						 RV3028_CLKOUT,
-						 RV3028_CLKOUT_FD_MASK, i);
-			if (ret < 0)
-				return ret;
+	enabled &= RV3028_CLKOUT_CLKOE;
 
-			return regmap_write(rv3028->regmap, RV3028_CLKOUT,
-				RV3028_CLKOUT_CLKSY | RV3028_CLKOUT_CLKOE);
-		}
-	}
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] == rate)
+			return rv3028_update_cfg(rv3028, RV3028_CLKOUT, 0xff,
+						 RV3028_CLKOUT_CLKSY | enabled | i);
 
 	return -EINVAL;
 }
@@ -811,10 +870,8 @@ static int rv3028_probe(struct i2c_client *client)
 				break;
 
 		if (i < ARRAY_SIZE(rv3028_trickle_resistors)) {
-			ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP,
-						 RV3028_BACKUP_TCE |
-						 RV3028_BACKUP_TCR_MASK,
-						 RV3028_BACKUP_TCE | i);
+			ret = rv3028_update_cfg(rv3028, RV3028_BACKUP, RV3028_BACKUP_TCE |
+						 RV3028_BACKUP_TCR_MASK, RV3028_BACKUP_TCE | i);
 			if (ret)
 				return ret;
 		} else {
@@ -835,7 +892,7 @@ static int rv3028_probe(struct i2c_client *client)
 
 	nvmem_cfg.priv = rv3028->regmap;
 	rtc_nvmem_register(rv3028->rtc, &nvmem_cfg);
-	eeprom_cfg.priv = rv3028->regmap;
+	eeprom_cfg.priv = rv3028;
 	rtc_nvmem_register(rv3028->rtc, &eeprom_cfg);
 
 	rv3028->rtc->max_user_freq = 1;
diff --git a/drivers/rtc/rtc-rv3032.c b/drivers/rtc/rtc-rv3032.c
new file mode 100644
index 000000000000..3e67f71f4261
--- /dev/null
+++ b/drivers/rtc/rtc-rv3032.c
@@ -0,0 +1,925 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RTC driver for the Micro Crystal RV3032
+ *
+ * Copyright (C) 2020 Micro Crystal SA
+ *
+ * Alexandre Belloni <alexandre.belloni@bootlin.com>
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/bcd.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+
+#define RV3032_SEC			0x01
+#define RV3032_MIN			0x02
+#define RV3032_HOUR			0x03
+#define RV3032_WDAY			0x04
+#define RV3032_DAY			0x05
+#define RV3032_MONTH			0x06
+#define RV3032_YEAR			0x07
+#define RV3032_ALARM_MIN		0x08
+#define RV3032_ALARM_HOUR		0x09
+#define RV3032_ALARM_DAY		0x0A
+#define RV3032_STATUS			0x0D
+#define RV3032_TLSB			0x0E
+#define RV3032_TMSB			0x0F
+#define RV3032_CTRL1			0x10
+#define RV3032_CTRL2			0x11
+#define RV3032_CTRL3			0x12
+#define RV3032_TS_CTRL			0x13
+#define RV3032_CLK_IRQ			0x14
+#define RV3032_EEPROM_ADDR		0x3D
+#define RV3032_EEPROM_DATA		0x3E
+#define RV3032_EEPROM_CMD		0x3F
+#define RV3032_RAM1			0x40
+#define RV3032_PMU			0xC0
+#define RV3032_OFFSET			0xC1
+#define RV3032_CLKOUT1			0xC2
+#define RV3032_CLKOUT2			0xC3
+#define RV3032_TREF0			0xC4
+#define RV3032_TREF1			0xC5
+
+#define RV3032_STATUS_VLF		BIT(0)
+#define RV3032_STATUS_PORF		BIT(1)
+#define RV3032_STATUS_EVF		BIT(2)
+#define RV3032_STATUS_AF		BIT(3)
+#define RV3032_STATUS_TF		BIT(4)
+#define RV3032_STATUS_UF		BIT(5)
+#define RV3032_STATUS_TLF		BIT(6)
+#define RV3032_STATUS_THF		BIT(7)
+
+#define RV3032_TLSB_CLKF		BIT(1)
+#define RV3032_TLSB_EEBUSY		BIT(2)
+#define RV3032_TLSB_TEMP		GENMASK(7, 4)
+
+#define RV3032_CLKOUT2_HFD_MSK		GENMASK(4, 0)
+#define RV3032_CLKOUT2_FD_MSK		GENMASK(6, 5)
+#define RV3032_CLKOUT2_OS		BIT(7)
+
+#define RV3032_CTRL1_EERD		BIT(3)
+#define RV3032_CTRL1_WADA		BIT(5)
+
+#define RV3032_CTRL2_STOP		BIT(0)
+#define RV3032_CTRL2_EIE		BIT(2)
+#define RV3032_CTRL2_AIE		BIT(3)
+#define RV3032_CTRL2_TIE		BIT(4)
+#define RV3032_CTRL2_UIE		BIT(5)
+#define RV3032_CTRL2_CLKIE		BIT(6)
+#define RV3032_CTRL2_TSE		BIT(7)
+
+#define RV3032_PMU_TCM			GENMASK(1, 0)
+#define RV3032_PMU_TCR			GENMASK(3, 2)
+#define RV3032_PMU_BSM			GENMASK(5, 4)
+#define RV3032_PMU_NCLKE		BIT(6)
+
+#define RV3032_PMU_BSM_DSM		1
+#define RV3032_PMU_BSM_LSM		2
+
+#define RV3032_OFFSET_MSK		GENMASK(5, 0)
+
+#define RV3032_EVT_CTRL_TSR		BIT(2)
+
+#define RV3032_EEPROM_CMD_UPDATE	0x11
+#define RV3032_EEPROM_CMD_WRITE		0x21
+#define RV3032_EEPROM_CMD_READ		0x22
+
+#define RV3032_EEPROM_USER		0xCB
+