diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-02-05 18:11:51 +0000 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-02-05 18:11:51 +0000 |
commit | 4c7d00ccf40db99bfb7bd1857bcbf007275704d8 (patch) | |
tree | 4f38907857f5ab4da0cfbc0e69f1cdf771bc4186 /drivers/pwm/pwm-imx27.c | |
parent | 18ea671ba40bcbb15c47118e20010240186da33b (diff) | |
parent | 9871abffc81048e20f02e15d6aa4558a44ad53ea (diff) |
Merge tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Mostly cleanups and minor improvements with some new chip support for
some drivers"
* tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
pwm: Remove set but not set variable 'pwm'
pwm: sun4i: Initialize variables before use
pwm: stm32: Remove automatic output enable
pwm: sun4i: Narrow scope of local variable
pwm: bcm2835: Allow building for ARCH_BRCMSTB
pwm: imx27: Eliminate error message for defer probe
pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR
pwm: sun4i: Move pwm_calculate() out of spin_lock()
pwm: omap-dmtimer: Allow compiling with COMPILE_TEST
pwm: omap-dmtimer: put_device() after of_find_device_by_node()
pwm: omap-dmtimer: Simplify error handling
pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional
pwm: Implement tracing for .get_state() and .apply_state()
pwm: rcar: Document inability to set duty_cycle = 0
pwm: rcar: Drop useless call to pwm_get_state()
pwm: Fix minor Kconfig whitespace issues
pwm: atmel: Implement .get_state()
pwm: atmel: Use register accessors for channels
pwm: atmel: Document known weaknesses of both hardware and software
pwm: atmel: Replace loop in prescale calculation by ad-hoc calculation
...
Diffstat (limited to 'drivers/pwm/pwm-imx27.c')
-rw-r--r-- | drivers/pwm/pwm-imx27.c | 147 |
1 files changed, 83 insertions, 64 deletions
diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c index ae11d8577f18..35a7ac42269c 100644 --- a/drivers/pwm/pwm-imx27.c +++ b/drivers/pwm/pwm-imx27.c @@ -85,6 +85,13 @@ struct pwm_imx27_chip { struct clk *clk_per; void __iomem *mmio_base; struct pwm_chip chip; + + /* + * The driver cannot read the current duty cycle from the hardware if + * the hardware is disabled. Cache the last programmed duty cycle + * value to return in that case. + */ + unsigned int duty_cycle; }; #define to_pwm_imx27_chip(chip) container_of(chip, struct pwm_imx27_chip, chip) @@ -155,14 +162,17 @@ static void pwm_imx27_get_state(struct pwm_chip *chip, tmp = NSEC_PER_SEC * (u64)(period + 2); state->period = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk); - /* PWMSAR can be read only if PWM is enabled */ - if (state->enabled) { + /* + * PWMSAR can be read only if PWM is enabled. If the PWM is disabled, + * use the cached value. + */ + if (state->enabled) val = readl(imx->mmio_base + MX3_PWMSAR); - tmp = NSEC_PER_SEC * (u64)(val); - state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk); - } else { - state->duty_cycle = 0; - } + else + val = imx->duty_cycle; + + tmp = NSEC_PER_SEC * (u64)(val); + state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk); if (!state->enabled) pwm_imx27_clk_disable_unprepare(chip); @@ -220,63 +230,68 @@ static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm, pwm_get_state(pwm, &cstate); - if (state->enabled) { - c = clk_get_rate(imx->clk_per); - c *= state->period; - - do_div(c, 1000000000); - period_cycles = c; - - prescale = period_cycles / 0x10000 + 1; - - period_cycles /= prescale; - c = (unsigned long long)period_cycles * state->duty_cycle; - do_div(c, state->period); - duty_cycles = c; - - /* - * according to imx pwm RM, the real period value should be - * PERIOD value in PWMPR plus 2. - */ - if (period_cycles > 2) - period_cycles -= 2; - else - period_cycles = 0; - - /* - * Wait for a free FIFO slot if the PWM is already enabled, and - * flush the FIFO if the PWM was disabled and is about to be - * enabled. - */ - if (cstate.enabled) { - pwm_imx27_wait_fifo_slot(chip, pwm); - } else { - ret = pwm_imx27_clk_prepare_enable(chip); - if (ret) - return ret; - - pwm_imx27_sw_reset(chip); - } - - writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); - writel(period_cycles, imx->mmio_base + MX3_PWMPR); - - cr = MX3_PWMCR_PRESCALER_SET(prescale) | - MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN | - FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) | - MX3_PWMCR_DBGEN | MX3_PWMCR_EN; - - if (state->polarity == PWM_POLARITY_INVERSED) - cr |= FIELD_PREP(MX3_PWMCR_POUTC, - MX3_PWMCR_POUTC_INVERTED); - - writel(cr, imx->mmio_base + MX3_PWMCR); - } else if (cstate.enabled) { - writel(0, imx->mmio_base + MX3_PWMCR); + c = clk_get_rate(imx->clk_per); + c *= state->period; - pwm_imx27_clk_disable_unprepare(chip); + do_div(c, 1000000000); + period_cycles = c; + + prescale = period_cycles / 0x10000 + 1; + + period_cycles /= prescale; + c = (unsigned long long)period_cycles * state->duty_cycle; + do_div(c, state->period); + duty_cycles = c; + + /* + * according to imx pwm RM, the real period value should be PERIOD + * value in PWMPR plus 2. + */ + if (period_cycles > 2) + period_cycles -= 2; + else + period_cycles = 0; + + /* + * Wait for a free FIFO slot if the PWM is already enabled, and flush + * the FIFO if the PWM was disabled and is about to be enabled. + */ + if (cstate.enabled) { + pwm_imx27_wait_fifo_slot(chip, pwm); + } else { + ret = pwm_imx27_clk_prepare_enable(chip); + if (ret) + return ret; + + pwm_imx27_sw_reset(chip); } + writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); + writel(period_cycles, imx->mmio_base + MX3_PWMPR); + + /* + * Store the duty cycle for future reference in cases where the + * MX3_PWMSAR register can't be read (i.e. when the PWM is disabled). + */ + imx->duty_cycle = duty_cycles; + + cr = MX3_PWMCR_PRESCALER_SET(prescale) | + MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN | + FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) | + MX3_PWMCR_DBGEN; + + if (state->polarity == PWM_POLARITY_INVERSED) + cr |= FIELD_PREP(MX3_PWMCR_POUTC, + MX3_PWMCR_POUTC_INVERTED); + + if (state->enabled) + cr |= MX3_PWMCR_EN; + + writel(cr, imx->mmio_base + MX3_PWMCR); + + if (!state->enabled && cstate.enabled) + pwm_imx27_clk_disable_unprepare(chip); + return 0; } @@ -304,9 +319,13 @@ static int pwm_imx27_probe(struct platform_device *pdev) imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(imx->clk_ipg)) { - dev_err(&pdev->dev, "getting ipg clock failed with %ld\n", - PTR_ERR(imx->clk_ipg)); - return PTR_ERR(imx->clk_ipg); + int ret = PTR_ERR(imx->clk_ipg); + + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "getting ipg clock failed with %d\n", + ret); + return ret; } imx->clk_per = devm_clk_get(&pdev->dev, "per"); |