diff options
author | Sebastian Reichel <sre@kernel.org> | 2016-06-17 13:54:32 +0200 |
---|---|---|
committer | Sebastian Reichel <sre@kernel.org> | 2016-08-11 01:11:03 +0200 |
commit | 8c0984e5a75337df513047ec92a6c09d78e3e5cd (patch) | |
tree | a2fc0a0dd7c7c40d9379bdd1c2b279c0959d0e1f /drivers/power/supply/charger-manager.c | |
parent | 29b4817d4018df78086157ea3a55c1d9424a7cfc (diff) |
power: move power supply drivers to power/supply
This moves all power supply drivers from drivers/power/
to drivers/power/supply/. The intention is a cleaner
source tree, since drivers/power/ also contains frameworks
unrelated to power supply, like adaptive voltage scaling.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Diffstat (limited to 'drivers/power/supply/charger-manager.c')
-rw-r--r-- | drivers/power/supply/charger-manager.c | 2074 |
1 files changed, 2074 insertions, 0 deletions
diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c new file mode 100644 index 000000000000..e664ca7c0afd --- /dev/null +++ b/drivers/power/supply/charger-manager.c @@ -0,0 +1,2074 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This driver enables to monitor battery health and control charger + * during suspend-to-mem. + * Charger manager depends on other devices. register this later than + * the depending devices. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +**/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/rtc.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <linux/platform_device.h> +#include <linux/power/charger-manager.h> +#include <linux/regulator/consumer.h> +#include <linux/sysfs.h> +#include <linux/of.h> +#include <linux/thermal.h> + +/* + * Default termperature threshold for charging. + * Every temperature units are in tenth of centigrade. + */ +#define CM_DEFAULT_RECHARGE_TEMP_DIFF 50 +#define CM_DEFAULT_CHARGE_TEMP_MAX 500 + +static const char * const default_event_names[] = { + [CM_EVENT_UNKNOWN] = "Unknown", + [CM_EVENT_BATT_FULL] = "Battery Full", + [CM_EVENT_BATT_IN] = "Battery Inserted", + [CM_EVENT_BATT_OUT] = "Battery Pulled Out", + [CM_EVENT_BATT_OVERHEAT] = "Battery Overheat", + [CM_EVENT_BATT_COLD] = "Battery Cold", + [CM_EVENT_EXT_PWR_IN_OUT] = "External Power Attach/Detach", + [CM_EVENT_CHG_START_STOP] = "Charging Start/Stop", + [CM_EVENT_OTHERS] = "Other battery events" +}; + +/* + * Regard CM_JIFFIES_SMALL jiffies is small enough to ignore for + * delayed works so that we can run delayed works with CM_JIFFIES_SMALL + * without any delays. + */ +#define CM_JIFFIES_SMALL (2) + +/* If y is valid (> 0) and smaller than x, do x = y */ +#define CM_MIN_VALID(x, y) x = (((y > 0) && ((x) > (y))) ? (y) : (x)) + +/* + * Regard CM_RTC_SMALL (sec) is small enough to ignore error in invoking + * rtc alarm. It should be 2 or larger + */ +#define CM_RTC_SMALL (2) + +#define UEVENT_BUF_SIZE 32 + +static LIST_HEAD(cm_list); +static DEFINE_MUTEX(cm_list_mtx); + +/* About in-suspend (suspend-again) monitoring */ +static struct alarm *cm_timer; + +static bool cm_suspended; +static bool cm_timer_set; +static unsigned long cm_suspend_duration_ms; + +/* About normal (not suspended) monitoring */ +static unsigned long polling_jiffy = ULONG_MAX; /* ULONG_MAX: no polling */ +static unsigned long next_polling; /* Next appointed polling time */ +static struct workqueue_struct *cm_wq; /* init at driver add */ +static struct delayed_work cm_monitor_work; /* init at driver add */ + +/** + * is_batt_present - See if the battery presents in place. + * @cm: the Charger Manager representing the battery. + */ +static bool is_batt_present(struct charger_manager *cm) +{ + union power_supply_propval val; + struct power_supply *psy; + bool present = false; + int i, ret; + + switch (cm->desc->battery_present) { + case CM_BATTERY_PRESENT: + present = true; + break; + case CM_NO_BATTERY: + break; + case CM_FUEL_GAUGE: + psy = power_supply_get_by_name(cm->desc->psy_fuel_gauge); + if (!psy) + break; + + ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_PRESENT, + &val); + if (ret == 0 && val.intval) + present = true; + power_supply_put(psy); + break; + case CM_CHARGER_STAT: + for (i = 0; cm->desc->psy_charger_stat[i]; i++) { + psy = power_supply_get_by_name( + cm->desc->psy_charger_stat[i]); + if (!psy) { + dev_err(cm->dev, "Cannot find power supply \"%s\"\n", + cm->desc->psy_charger_stat[i]); + continue; + } + + ret = power_supply_get_property(psy, + POWER_SUPPLY_PROP_PRESENT, &val); + power_supply_put(psy); + if (ret == 0 && val.intval) { + present = true; + break; + } + } + break; + } + + return present; +} + +/** + * is_ext_pwr_online - See if an external power source is attached to charge + * @cm: the Charger Manager representing the battery. + * + * Returns true if at least one of the chargers of the battery has an external + * power source attached to charge the battery regardless of whether it is + * actually charging or not. + */ +static bool is_ext_pwr_online(struct charger_manager *cm) +{ + union power_supply_propval val; + struct power_supply *psy; + bool online = false; + int i, ret; + + /* If at least one of them has one, it's yes. */ + for (i = 0; cm->desc->psy_charger_stat[i]; i++) { + psy = power_supply_get_by_name(cm->desc->psy_charger_stat[i]); + if (!psy) { + dev_err(cm->dev, "Cannot find power supply \"%s\"\n", + cm->desc->psy_charger_stat[i]); + continue; + } + + ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_ONLINE, + &val); + power_supply_put(psy); + if (ret == 0 && val.intval) { + online = true; + break; + } + } + + return online; +} + +/** + * get_batt_uV - Get the voltage level of the battery + * @cm: the Charger Manager representing the battery. + * @uV: the voltage level returned. + * + * Returns 0 if there is no error. + * Returns a negative value on error. + */ +static int get_batt_uV(struct charger_manager *cm, int *uV) +{ + union power_supply_propval val; + struct power_supply *fuel_gauge; + int ret; + + fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge); + if (!fuel_gauge) + return -ENODEV; + + ret = power_supply_get_property(fuel_gauge, + POWER_SUPPLY_PROP_VOLTAGE_NOW, &val); + power_supply_put(fuel_gauge); + if (ret) + return ret; + + *uV = val.intval; + return 0; +} + +/** + * is_charging - Returns true if the battery is being charged. + * @cm: the Charger Manager representing the battery. + */ +static bool is_charging(struct charger_manager *cm) +{ + int i, ret; + bool charging = false; + struct power_supply *psy; + union power_supply_propval val; + + /* If there is no battery, it cannot be charged */ + if (!is_batt_present(cm)) + return false; + + /* If at least one of the charger is charging, return yes */ + for (i = 0; cm->desc->psy_charger_stat[i]; i++) { + /* 1. The charger sholuld not be DISABLED */ + if (cm->emergency_stop) + continue; + if (!cm->charger_enabled) + continue; + + psy = power_supply_get_by_name(cm->desc->psy_charger_stat[i]); + if (!psy) { + dev_err(cm->dev, "Cannot find power supply \"%s\"\n", + cm->desc->psy_charger_stat[i]); + continue; + } + + /* 2. The charger should be online (ext-power) */ + ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_ONLINE, + &val); + if (ret) { + dev_warn(cm->dev, "Cannot read ONLINE value from %s\n", + cm->desc->psy_charger_stat[i]); + power_supply_put(psy); + continue; + } + if (val.intval == 0) { + power_supply_put(psy); + continue; + } + + /* + * 3. The charger should not be FULL, DISCHARGING, + * or NOT_CHARGING. + */ + ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_STATUS, + &val); + power_supply_put(psy); + if (ret) { + dev_warn(cm->dev, "Cannot read STATUS value from %s\n", + cm->desc->psy_charger_stat[i]); + continue; + } + if (val.intval == POWER_SUPPLY_STATUS_FULL || + val.intval == POWER_SUPPLY_STATUS_DISCHARGING || + val.intval == POWER_SUPPLY_STATUS_NOT_CHARGING) + continue; + + /* Then, this is charging. */ + charging = true; + break; + } + + return charging; +} + +/** + * is_full_charged - Returns true if the battery is fully charged. + * @cm: the Charger Manager representing the battery. + */ +static bool is_full_charged(struct charger_manager *cm) +{ + struct charger_desc *desc = cm->desc; + union power_supply_propval val; + struct power_supply *fuel_gauge; + bool is_full = false; + int ret = 0; + int uV; + + /* If there is no battery, it cannot be charged */ + if (!is_batt_present(cm)) + return false; + + fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge); + if (!fuel_gauge) + return false; + + if (desc->fullbatt_full_capacity > 0) { + val.intval = 0; + + /* Not full if capacity of fuel gauge isn't full */ + ret = power_supply_get_property(fuel_gauge, + POWER_SUPPLY_PROP_CHARGE_FULL, &val); + if (!ret && val.intval > desc->fullbatt_full_capacity) { + is_full = true; + goto out; + } + } + + /* Full, if it's over the fullbatt voltage */ + if (desc->fullbatt_uV > 0) { + ret = get_batt_uV(cm, &uV); + if (!ret && uV >= desc->fullbatt_uV) { + is_full = true; + goto out; + } + } + + /* Full, if the capacity is more than fullbatt_soc */ + if (desc->fullbatt_soc > 0) { + val.intval = 0; + + ret = power_supply_get_property(fuel_gauge, + POWER_SUPPLY_PROP_CAPACITY, &val); + if (!ret && val.intval >= desc->fullbatt_soc) { + is_full = true; + goto out; + } + } + +out: + power_supply_put(fuel_gauge); + return is_full; +} + +/** + * is_polling_required - Return true if need to continue polling for this CM. + * @cm: the Charger Manager representing the battery. + */ +static bool is_polling_required(struct charger_manager *cm) +{ + switch (cm->desc->polling_mode) { + case CM_POLL_DISABLE: + return false; + case CM_POLL_ALWAYS: + return true; + case CM_POLL_EXTERNAL_POWER_ONLY: + return is_ext_pwr_online(cm); + case CM_POLL_CHARGING_ONLY: + return is_charging(cm); + default: + dev_warn(cm->dev, "Incorrect polling_mode (%d)\n", + cm->desc->polling_mode); + } + + return false; +} + +/** + * try_charger_enable - Enable/Disable chargers altogether + * @cm: the Charger Manager representing the battery. + * @enable: true: enable / false: disable + * + * Note that Charger Manager keeps the charger enabled regardless whether + * the charger is charging or not (because battery is full or no external + * power source exists) except when CM needs to disable chargers forcibly + * bacause of emergency causes; when the battery is overheated or too cold. + */ +static int try_charger_enable(struct charger_manager *cm, bool enable) +{ + int err = 0, i; + struct charger_desc *desc = cm->desc; + + /* Ignore if it's redundent command */ + if (enable == cm->charger_enabled) + return 0; + + if (enable) { + if (cm->emergency_stop) + return -EAGAIN; + + /* + * Save start time of charging to limit + * maximum possible charging time. + */ + cm->charging_start_time = ktime_to_ms(ktime_get()); + cm->charging_end_time = 0; + + for (i = 0 ; i < desc->num_charger_regulators ; i++) { + if (desc->charger_regulators[i].externally_control) + continue; + + err = regulator_enable(desc->charger_regulators[i].consumer); + if (err < 0) { + dev_warn(cm->dev, "Cannot enable %s regulator\n", + desc->charger_regulators[i].regulator_name); + } + } + } else { + /* + * Save end time of charging to maintain fully charged state + * of battery after full-batt. + */ + cm->charging_start_time = 0; + cm->charging_end_time = ktime_to_ms(ktime_get()); + + for (i = 0 ; i < desc->num_charger_regulators ; i++) { + if (desc->charger_regulators[i].externally_control) + continue; + + err = regulator_disable(desc->charger_regulators[i].consumer); + if (err < 0) { + dev_warn(cm->dev, "Cannot disable %s regulator\n", + desc->charger_regulators[i].regulator_name); + } + } + + /* + * Abnormal battery state - Stop charging forcibly, + * even if charger was enabled at the other places + */ + for (i = 0; i < desc->num_charger_regulators; i++) { + if (regulator_is_enabled( + desc->charger_regulators[i].consumer)) { + regulator_force_disable( + desc->charger_regulators[i].consumer); + dev_warn(cm->dev, "Disable regulator(%s) forcibly\n", + desc->charger_regulators[i].regulator_name); + } + } + } + + if (!err) + cm->charger_enabled = enable; + + return err; +} + +/** + * try_charger_restart - Restart charging. + * @cm: the Charger Manager representing the battery. + * + * Restart charging by turning off and on the charger. + */ +static int try_charger_restart(struct charger_manager *cm) +{ + int err; + + if (cm->emergency_stop) + return -EAGAIN; + + err = try_charger_enable(cm, false); + if (err) + return err; + + return try_charger_enable(cm, true); +} + +/** + * uevent_notify - Let users know something has changed. + * @cm: the Charger Manager representing the battery. + * @event: the event string. + * + * If @event is null, it implies that uevent_notify is called + * by resume function. When called in the resume function, cm_suspended + * should be already reset to false in order to let uevent_notify + * notify the recent event during the suspend to users. While + * suspended, uevent_notify does not notify users, but tracks + * events so that uevent_notify can notify users later after resumed. + */ +static void uevent_notify(struct charger_manager *cm, const char *event) +{ + static char env_str[UEVENT_BUF_SIZE + 1] = ""; + static char env_str_save[UEVENT_BUF_SIZE + 1] = ""; + + if (cm_suspended) { + /* Nothing in suspended-event buffer */ + if (env_str_save[0] == 0) { + if (!strncmp(env_str, event, UEVENT_BUF_SIZE)) + return; /* status not changed */ + strncpy(env_str_save, event, UEVENT_BUF_SIZE); + return; + } + + if (!strncmp(env_str_save, event, UEVENT_BUF_SIZE)) + return; /* Duplicated. */ + strncpy(env_str_save, event, UEVENT_BUF_SIZE); + return; + } + + if (event == NULL) { + /* No messages pending */ + if (!env_str_save[0]) + return; + + strncpy(env_str, env_str_save, UEVENT_BUF_SIZE); + kobject_uevent(&cm->dev->kobj, KOBJ_CHANGE); + env_str_save[0] = 0; + + return; + } + + /* status not changed */ + if (!strncmp(env_str, event, UEVENT_BUF_SIZE)) + return; + + /* save the status and notify the update */ + strncpy(env_str, event, UEVENT_BUF_SIZE); + kobject_uevent(&cm->dev->kobj, KOBJ_CHANGE); + + dev_info(cm->dev, "%s\n", event); +} + +/** + * fullbatt_vchk - Check voltage drop some times after "FULL" event. + * @work: the work_struct appointing the function + * + * If a user has designated "fullbatt_vchkdrop_ms/uV" values with + * charger_desc, Charger Manager checks voltage drop after the battery + * "FULL" event. It checks whether the voltage has dropped more than + * fullbatt_vchkdrop_uV by calling this function after fullbatt_vchkrop_ms. + */ +static void fullbatt_vchk(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct charger_manager *cm = container_of(dwork, + struct charger_manager, fullbatt_vchk_work); + struct charger_desc *desc = cm->desc; + int batt_uV, err, diff; + + /* remove the appointment for fullbatt_vchk */ + cm->fullbatt_vchk_jiffies_at = 0; + + if (!desc->fullbatt_vchkdrop_uV || !desc->fullbatt_vchkdrop_ms) + return; + + err = get_batt_uV(cm, &batt_uV); + if (err) { + dev_err(cm->dev, "%s: get_batt_uV error(%d)\n", __func__, err); + return; + } + + diff = desc->fullbatt_uV - batt_uV; + if (diff < 0) + return; + + dev_info(cm->dev, "VBATT dropped %duV after full-batt\n", diff); + + if (diff > desc->fullbatt_vchkdrop_uV) { + try_charger_restart(cm); + uevent_notify(cm, "Recharging"); + } +} + +/** + * check_charging_duration - Monitor charging/discharging duration + * @cm: the Charger Manager representing the battery. + * + * If whole charging duration exceed 'charging_max_duration_ms', + * cm stop charging to prevent overcharge/overheat. If discharging + * duration exceed 'discharging _max_duration_ms', charger cable is + * attached, after full-batt, cm start charging to maintain fully + * charged state for battery. + */ +static int check_charging_duration(struct charger_manager *cm) +{ + struct charger_desc *desc = cm->desc; + u64 curr = ktime_to_ms(ktime_get()); + u64 duration; + int ret = false; + + if (!desc->charging_max_duration_ms && + !desc->discharging_max_duration_ms) + return ret; + + if (cm->charger_enabled) { + duration = curr - cm->charging_start_time; + + if (duration > desc->charging_max_duration_ms) { + dev_info(cm->dev, "Charging duration exceed %ums\n", + desc->charging_max_duration_ms); + uevent_notify(cm, "Discharging"); + try_charger_enable(cm, false); + ret = true; + } + } else if (is_ext_pwr_online(cm) && !cm->charger_enabled) { + duration = curr - cm->charging_end_time; + + if (duration > desc->charging_max_duration_ms && + is_ext_pwr_online(cm)) { + dev_info(cm->dev, "Discharging duration exceed %ums\n", + desc->discharging_max_duration_ms); + uevent_notify(cm, "Recharging"); + try_charger_enable(cm, true); + ret = true; + } + } + + return ret; +} + +static int cm_get_battery_temperature_by_psy(struct charger_manager *cm, + int *temp) +{ + struct power_supply *fuel_gauge; + int ret; + + fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge); + if (!fuel_gauge) + return -ENODEV; + + ret = power_supply_get_property(fuel_gauge, + POWER_SUPPLY_PROP_TEMP, + (union power_supply_propval *)temp); + power_supply_put(fuel_gauge); + + return ret; +} + +static int cm_get_battery_temperature(struct charger_manager *cm, + int *temp) +{ + int ret; + + if (!cm->desc->measure_battery_temp) + return -ENODEV; + +#ifdef CONFIG_THERMAL + if (cm->tzd_batt) { + ret = thermal_zone_get_temp(cm->tzd_batt, temp); + if (!ret) + /* Calibrate temperature unit */ + *temp /= 100; + } else +#endif + { + /* if-else continued from CONFIG_THERMAL */ + ret = cm_get_battery_temperature_by_psy(cm, temp); + } + + return ret; +} + +static int cm_check_thermal_status(struct charger_manager *cm) +{ + struct charger_desc *desc = cm->desc; + int temp, upper_limit, lower_limit; + int ret = 0; + + ret = cm_get_battery_temperature(cm, &temp); + if (ret) { + /* FIXME: + * No information of battery temperature might + * occur hazadous result. We have to handle it + * depending on battery type. + */ + dev_err(cm->dev, "Failed to get battery temperature\n"); + return 0; + } + + upper_limit = desc->temp_max; + lower_limit = desc->temp_min; + + if (cm->emergency_stop) { + upper_limit -= desc->temp_diff; + lower_limit += desc->temp_diff; + } + + if (temp > upper_limit) + ret = CM_EVENT_BATT_OVERHEAT; + else if (temp < lower_limit) + ret = CM_EVENT_BATT_COLD; + + return ret; +} + +/** + * _cm_monitor - Monitor the temperature and return true for exceptions. + * @cm: the Charger Manager representing the battery. + * + * Returns true if there is an event to notify for the battery. + * (True if the status of "emergency_stop" changes) + */ +static bool _cm_monitor(struct charger_manager *cm) +{ + int temp_alrt; + + temp_alrt = cm_check_thermal_status(cm); + + /* It has been stopped already */ + if (temp_alrt && cm->emergency_stop) + return false; + + /* + * Check temperature whether overheat or cold. + * If temperature is out of range normal state, stop charging. + */ + if (temp_alrt) { + cm->emergency_stop = temp_alrt; + if (!try_charger_enable(cm, false)) + uevent_notify(cm, default_event_names[temp_alrt]); + + /* + * Check whole charging duration and discharing duration + * after full-batt. + */ + } else if (!cm->emergency_stop && check_charging_duration(cm)) { + dev_dbg(cm->dev, + "Charging/Discharging duration is out of range\n"); + /* + * Check dropped voltage of battery. If battery voltage is more + * dropped than fullbatt_vchkdrop_uV after fully charged state, + * charger-manager have to recharge battery. + */ + } else if (!cm->emergency_stop && is_ext_pwr_online(cm) && + !cm->charger_enabled) { + fullbatt_vchk(&cm->fullbatt_vchk_work.work); + + /* + * Check whether fully charged state to protect overcharge + * if charger-manager is charging for battery. + */ + } else if (!cm->emergency_stop && is_full_charged(cm) && + cm->charger_enabled) { + dev_info(cm->dev, "EVENT_HANDLE: Battery Fully Charged\n"); + uevent_notify(cm, default_event_names[CM_EVENT_BATT_FULL]); + + try_charger_enable(cm, false); + + fullbatt_vchk(&cm->fullbatt_vchk_work.work); + } else { + cm->emergency_stop = 0; + if (is_ext_pwr_online(cm)) { + if (!try_charger_enable(cm, true)) + uevent_notify(cm, "CHARGING"); + } + } + + return true; +} + +/** + * cm_monitor - Monitor every battery. + * + * Returns true if there is an event to notify from any of the batteries. + * (True if the status of "emergency_stop" changes) + */ +static bool cm_monitor(void) +{ + bool stop = false; + struct charger_manager *cm; + + mutex_lock(&cm_list_mtx); + + list_for_each_entry(cm, &cm_list, entry) { + if (_cm_monitor(cm)) + stop = true; + } + + mutex_unlock(&cm_list_mtx); + + return stop; +} + +/** + * _setup_polling - Setup the next instance of polling. + * @work: work_struct of the function _setup_polling. + */ +static void _setup_polling(struct work_struct *work) +{ + unsigned long min = ULONG_MAX; + struct charger_manager *cm; + bool keep_polling = false; + unsigned long _next_polling; + + mutex_lock(&cm_list_mtx); + + list_for_each_entry(cm, &cm_list, entry) { + if (is_polling_required(cm) && cm->desc->polling_interval_ms) { + keep_polling = true; + + if (min > cm->desc->polling_interval_ms) + min = cm->desc->polling_interval_ms; + } + } + + polling_jiffy = msecs_to_jiffies(min); + if (polling_jiffy <= CM_JIFFIES_SMALL) + polling_jiffy = CM_JIFFIES_SMALL + 1; + + if (!keep_polling) + polling_jiffy = ULONG_MAX; + if (polling_jiffy == ULONG_MAX) + goto out; + + WARN(cm_wq == NULL, "charger-manager: workqueue not initialized" + ". try it later. %s\n", __func__); + + /* + * Use mod_delayed_work() iff the next polling interval should + * occur before the currently scheduled one. If @cm_monitor_work + * isn't active, the end result is the same, so no need to worry + * about stale @next_polling. + */ + _next_polling = jiffies + polling_jiffy; + + if (time_before(_next_polling, next_polling)) { + mod_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy); + next_polling = _next_polling; + } else { + if (queue_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy)) + next_polling = _next_polling; + } +out: + mutex_unlock(&cm_list_mtx); +} +static DECLARE_WORK(setup_polling, _setup_polling); + +/** + * cm_monitor_poller - The Monitor / Poller. + * @work: work_struct of the function cm_monitor_poller + * + * During non-suspended state, cm_monitor_poller is used to poll and monitor + * the batteries. + */ +static void cm_monitor_poller(struct work_struct *work) +{ + cm_monitor(); + schedule_work(&setup_polling); +} + +/** + * fullbatt_handler - Event handler for CM_EVENT_BATT_FULL + * @cm: the Charger Manager representing the battery. + */ +static void fullbatt_handler(struct charger_manager *cm) +{ + struct charger_desc *desc = cm->desc; + + if (!desc->fullbatt_vchkdrop_uV || !desc->fullbatt_vchkdrop_ms) + goto out; + + if (cm_suspended) + device_set_wakeup_capable(cm->dev, true); + + mod_delayed_work(cm_wq, &cm->fullbatt_vchk_work, + msecs_to_jiffies(desc->fullbatt_vchkdrop_ms)); + cm->fullbatt_vchk_jiffies_at = jiffies + msecs_to_jiffies( + desc->fullbatt_vchkdrop_ms); + + if (cm->fullbatt_vchk_jiffies_at == 0) + cm->fullbatt_vchk_jiffies_at = 1; + +out: + dev_info(cm->dev, "EVENT_HANDLE: Battery Fully Charged\n"); + uevent_notify(cm, default_event_names[CM_EVENT_BATT_FULL]); +} + +/** + * battout_handler - Event handler for CM_EVENT_BATT_OUT + * @cm: the Charger Manager representing the battery. + */ +static void battout_handler(struct charger_manager *cm) +{ + if (cm_suspended) + device_set_wakeup_capable(cm->dev, true); + + if (!is_batt_present(cm)) { + dev_emerg(cm->dev, "Battery Pulled Out!\n"); + uevent_notify(cm, default_event_names[CM_EVENT_BATT_OUT]); + } else { + uevent_notify(cm, "Battery Reinserted?"); + } +} + +/** + * misc_event_handler - Handler for other evnets + * @cm: the Charger Manager representing the battery. + * @type: the Charger Manager representing the battery. + */ +static void misc_event_handler(struct charger_manager *cm, + enum cm_event_types type) +{ + if (cm_suspended) + device_set_wakeup_capable(cm->dev, true); + + if (is_polling_required(cm) && cm->desc->polling_interval_ms) + schedule_work(&setup_polling); + uevent_notify(cm, default_event_names[type]); +} + +static int charger_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct charger_manager *cm = power_supply_get_drvdata(psy); + struct charger_desc *desc = cm->desc; + struct power_supply *fuel_gauge = NULL; + int ret = 0; + int uV; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (is_charging(cm)) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (is_ext_pwr_online(cm)) + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + case POWER_SUPPLY_PROP_HEALTH: + if (cm->emergency_stop > 0) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else if (cm->emergency_stop < 0) + val->intval = POWER_SUPPLY_HEALTH_COLD; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_PRESENT: + if (is_batt_present(cm)) + val->intval = 1; + else + val->intval = 0; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = get_batt_uV(cm, &val->intval); + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge); + if (!fuel_gauge) { + ret = -ENODEV; + break; + } + ret = power_supply_get_property(fuel_gauge, + POWER_SUPPLY_PROP_CURRENT_NOW, val); + break; + case POWER_SUPPLY_PROP_TEMP: + case POWER_SUPPLY_PROP_TEMP_AMBIENT: + return cm_get_battery_temperature(cm, &val->intval); + case POWER_SUPPLY_PROP_CAPACITY: + if (!is_batt_present(cm)) { + /* There is no battery. Assume 100% */ + val->intval = 100; + break; + } + + fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge); + if (!fuel_gauge) { + ret = -ENODEV; + break; + } + + ret = power_supply_get_property(fuel_gauge, + POWER_SUPPLY_PROP_CAPACITY, val); + if (ret) + break; + + if (val->intval > 100) { + val->intval = 100; + break; + } + if (val->intval < 0) + val->intval = 0; + + /* Do not adjust SOC when charging: voltage is overrated */ + if (is_charging(cm)) + break; + + /* + * If the capacity value is inconsistent, calibrate it base on + * the battery voltage values and the thresholds given as desc + */ + ret = get_batt_uV(cm, &uV); + if (ret) { + /* Voltage information not available. No calibration */ + ret = 0; + break; + } + + if (desc->fullbatt_uV > 0 && uV >= desc->fullbatt_uV && + !is_charging(cm)) { + val->intval = 100; + break; + } + + break; + case POWER_SUPPLY_PROP_ONLINE: + if (is_ext_pwr_online(cm)) + val->intval = 1; + else + val->intval = 0; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + if (is_full_charged(cm)) + val->intval = 1; + else + val->intval = 0; + ret = 0; + break; + case POWER_SUPPLY_PROP_CHARGE_NOW: + if (is_charging(cm)) { + fuel_gauge = power_supply_get_by_name( + cm->desc->psy_fuel_gauge); + if (!fuel_gauge) { + ret = -ENODEV; + break; + } + + ret = power_supply_get_property(fuel_gauge, + POWER_SUPPLY_PROP_CHARGE_NOW, + val); + if (ret) { + val->intval = 1; + ret = 0; + } else { + /* If CHARGE_NOW is supplied, use it */ + val->intval = (val->intval > 0) ? + val->intval : 1; + } + } else { + val->intval = 0; + } + break; + default: + return -EINVAL; + } + if (fuel_gauge) + power_supply_put(fuel_gauge); + return ret; +} + +#define NUM_CHARGER_PSY_OPTIONAL (4) +static enum power_supply_property default_charger_props[] = { + /* Guaranteed to provide */ + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_CHARGE_FULL, + /* + * Optional properties are: + * POWER_SUPPLY_PROP_CHARGE_NOW, + * POWER_SUPPLY_PROP_CURRENT_NOW, + * POWER_SUPPLY_PROP_TEMP, and + * POWER_SUPPLY_PROP_TEMP_AMBIENT, + */ +}; + +static const struct power_supply_desc psy_default = { + .name = "battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = default_charger_props, + .num_properties = ARRAY_SIZE(default_charger_props), + .get_property = charger_get_property, + .no_thermal = true, +}; + +/** + * cm_setup_timer - For in-suspend monitoring setup wakeup alarm + * for suspend_again. + * + * Returns true if the alarm is set for Charger Manager to use. + * Returns false if + * cm_setup_timer fails to set an alarm, + * cm_setup_timer does not need to set an alarm for Charger Manager, + * or an alarm previously configured is to be used. + */ +static bool cm_setup_timer(void) +{ + struct charger_manager *cm; + unsigned int wakeup_ms = UINT_MAX; + int timer_req = 0; + + if (time_after(next_polling, jiffies)) + CM_MIN_VALID(wakeup_ms, + jiffies_to_msecs(next_polling - jiffies)); + + mutex_lock(&cm_list_mtx); + list_for_each_entry(cm, &cm_list, entry) { + unsigned int fbchk_ms = 0; + + /* fullbatt_vchk is required. setup timer for that */ + if (cm->fullbatt_vchk_jiffies_at) { + fbchk_ms = jiffies_to_msecs(cm->fullbatt_vchk_jiffies_at + - jiffies); + if (time_is_before_eq_jiffies( + cm->fullbatt_vchk_jiffies_at) || + msecs_to_jiffies(fbchk_ms) < CM_JIFFIES_SMALL) { + fullbatt_vchk(&cm->fullbatt_vchk_work.work); + fbchk_ms = 0; + } + } + CM_MIN_VALID(wakeup_ms, fbchk_ms); + + /* Skip if polling is not required for this CM */ + if (!is_polling_required(cm) && !cm->emergency_stop) + continue; + timer_req++; + if (cm->desc->polling_interval_ms == 0) + continue; + CM_MIN_VALID(wakeup_ms, cm->desc->polling_interval_ms); + } + mutex_unlock(&cm_list_mtx); + + if (timer_req && cm_timer) { + ktime_t now, add; + + /* + * Set alarm with the polling interval (wakeup_ms) + * The alarm time should be NOW + CM_RTC_SMALL or later. + */ + if (wakeup_ms == UINT_MAX || + wakeup_ms < CM_RTC_SMALL * MSEC_PER_SEC) + wakeup_ms = 2 * CM_RTC_SMALL * MSEC_PER_SEC; + + pr_info("Charger Manager wakeup timer: %u ms\n", wakeup_ms); + + now = ktime_get_boottime(); + add = ktime_set(wakeup_ms / MSEC_PER_SEC, + (wakeup_ms % MSEC_PER_SEC) * NSEC_PER_MSEC); + alarm_start(cm_timer, ktime_add(now, add)); + + cm_suspend_duration_ms = wakeup_ms; + + return true; + } + return false; +} + +/** + * charger_extcon_work - enable/diable charger according to the state + * of charger cable + * + * @work: work_struct of the function charger_extcon_work. + */ +static void charger_extcon_work(struct work_struct *work) +{ + struct charger_cable *cable = + container_of(work, struct charger_cable, wq); + int ret; + + if (cable->attached && cable->min_uA != 0 && cable->max_uA != 0) { + ret = regulator_set_current_limit(cable->charger->consumer, + cable->min_uA, cable->max_uA); + if (ret < 0) { + pr_err("Cannot set current limit of %s (%s)\n", + cable->charger->regulator_name, cable->name); + return; + } + + pr_info("Set current limit of %s : %duA ~ %duA\n", + cable->charger->regulator_name, + cable->min_uA, cable->max_uA); + } + + try_charger_enable(cable->cm, cable->attached); +} + +/** + * charger_extcon_notifier - receive the state of charger cable + * when registered cable is attached or detached. + * + * @self: the notifier block of the charger_extcon_notifier. + * @event: the cable |